There are two Mutexes that are created but not yet destroyed for
RAMState. Fix that.
Since we are at it, provide helper function to clean up RAMState.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The old ram_state_init() is not really initializing the RAMState only,
but including lots of other stuff that is RAM-related. Renaming it to
ram_init_all(). Instead, provide a real ram_state_init().
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add pause-before-switchover support for postcopy.
After starting postcopy it will transition
active->pre-switchover->postcopy_active
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If a migration_cancel is issued during the new paused state,
kick the pause_sem to get to unpause so it can cancel.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A new qmp command allows the caller to continue from a given
paused state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Wait for a semaphore before completing the migration,
if the previously added capability was enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two statuses for use when the 'pause-before-switchover'
capability is enabled.
'pre-switchover' is the state that we wait in for management
to allow us to continue.
'device' is the state we enter while serialising the devices
after management gives us the OK.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When 'pause-before-switchover' is enabled, the outgoing migration
will pause before invalidating the block devices and serializing
the device state.
At this point the management layer gets the chance to clean up any
device jobs or other device users before the migration completes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, take a total size instead of the size of the pages. We
move the check that the new_size is bigger than one page from
xbzrle_cache_resize().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix typo spotted by Peter Xu
It was not used at all since commit:
27af7d6ea5
which replaced its use by the dirty sync count.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Some of the callers were already scaling bytes to sectors; others
can be easily converted to pass byte offsets, all in our shift
towards a consistent byte interface everywhere. Making the change
will also make it easier to write the hold-out callers to use byte
rather than sectors for their iterations; it also makes it easier
for a future dirty-bitmap patch to offload scaling over to the
internal hbitmap. Although all callers happen to pass
sector-aligned values, make the internal scaling robust to any
sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Half the callers were already scaling bytes to sectors; the other
half can eventually be simplified to use byte iteration. Both
callers were already using the result as a bool, so make that
explicit. Making the change also makes it easier for a future
dirty-bitmap patch to offload scaling over to the internal hbitmap.
Remember, asking whether a byte is dirty is effectively asking
whether the entire granularity containing the byte is dirty, since
we only track dirtiness by granularity.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Thanks to recent cleanups, all callers were scaling a return value
of sectors into bytes; do the scaling internally instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vmstate_save_state is called in lots of places.
Route error returns from the easier cases back up; there are lots
of more complex cases where their own error paths need fixing.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-7-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fix up as Peter's review
Route the errors from vsmtate_save_state back up through
vmstate_save and out to the normal device state path.
That's the normal error path done.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-6-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Route the errors from vmstate_save_state up through
vmstate_subsection_save (and back down, all rather recursive).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-5-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit message fixed up as per Peter's review
Check the return values from vmstate_save_state for fields and also the
return values from 'put' for fields that use that.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-4-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Check the return value of pre_save state and fail vmstate_save_state
if the pre_save failed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
auto-converge and block migration currently do not play well together.
During block migration the auto-converge logic detects that ram
migration makes no progress and thus throttles down the vm until
it nearly stalls completely. Avoid this by disabling the throttling
logic during the bulk phase of the block migration.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1506421996-12513-1-git-send-email-pl@kamp.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This modification is necessary for userfault fd features which are
required to be requested from userspace.
UFFD_FEATURE_THREAD_ID is a one of such "on demand" feature, which will
be introduced in the next patch.
QEMU have to use separate userfault file descriptor, due to
userfault context has internal state, and after first call of
ioctl UFFD_API it changes its state to UFFD_STATE_RUNNING (in case of
success), but kernel while handling ioctl UFFD_API expects UFFD_STATE_WAIT_API.
So only one ioctl with UFFD_API is possible per ufd.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
That tiny refactoring is necessary to be able to set
UFFD_FEATURE_THREAD_ID while requesting features, and then
to create downtime context in case when kernel supports it.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Split common postcopy staff from ram postcopy staff.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fill postcopy-able pending only if ram postcopy is enabled.
It is necessary because of there will be other postcopy-able states and
when ram postcopy is disabled, it should not spoil common postcopy
related pending.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now postcopy-able states are recognized by not NULL
save_live_complete_postcopy handler. But when we have several different
postcopy-able states, it is not convenient. Ram postcopy may be
disabled, while some other postcopy enabled, in this case Ram state
should behave as it is not postcopy-able.
This patch add separate has_postcopy handler to specify behaviour of
savevm state.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need that on later patches.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Creation of the threads, nothing inside yet.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Use pointers instead of long array names
Move to use semaphores instead of conditions as paolo suggestion
Put all the state inside one struct.
Use a counter for the number of threads created. Needed during cancellation.
Add error return to thread creation
Add id field
Rename functions to multifd_save/load_setup/cleanup
Change recv parameters to a pointer to struct
Change back to a struct
Use Error * for _cleanup
Indicates how many pages we are going to send in each batch to a multifd
thread.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Be consistent with defaults and documentation
Use new DEFINE_PROP_*
Rename x-multifd-group to x-multifd-page-count
Indicates the number of channels that we will create. By default we
create 2 channels.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Catch inconsistent defaults (eric).
Improve comment stating that number of threads is the same than number
of sockets
Use new DEFIN_PROP_*
Rename x-multifd-threads to x-multifd-threads
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
--
Use new DEFINE_PROP
This function allows us to decide when to close the listener socket.
For now, we only need one connection.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
As this is defined on glib 2.32, add compatibility macros for older glibs.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We pass the ioc instead of the fd. This will allow us to have more
than one channel open. We also make sure that we set the
from_src_file sooner, so we don't need to pass it as a parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
--
Do not assing mis->from_src_file (peterxu)
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170907084230.26493-1-famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Strings are more readable for debugging.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1504081950-2528-5-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up merge with 977c73
migration_incoming_state_destroy doesn't really destroy, it cleans up.
After a loadvm it's called, but the loadvm command can be run twice,
and so destroying an init-once mutex breaks on the second loadvm.
Reported-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170825141940.20740-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Unused since commit fd8cec XBZRLE: Fix qemu crash when resize the
xbzrle cache.
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1501148776-16890-2-git-send-email-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the bdrv_inactivate_all fails near the end of the migration,
the migration will fail and often the only diagnostics in the log
are an I/O error which you can't distinguish from an error on
the socket connection.
Add an error so we know when it's actually a block problem.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170822170212.27347-1-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
Comments for "migration_dirty_pages" and "bitmap_mutex" are switched.
Fix it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1501666880-10159-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Spotted thanks to valgrind and tests/device-introspect-test:
==11711== 1 bytes in 1 blocks are definitely lost in loss record 6 of 14,537
==11711== at 0x4C2EB6B: malloc (vg_replace_malloc.c:299)
==11711== by 0x1E0CDBD8: g_malloc (gmem.c:94)
==11711== by 0x1E0E696E: g_strdup (gstrfuncs.c:363)
==11711== by 0x695693: migration_instance_init (migration.c:2226)
==11711== by 0x717C4B: object_init_with_type (object.c:344)
==11711== by 0x717E80: object_initialize_with_type (object.c:375)
==11711== by 0x7182EB: object_new_with_type (object.c:483)
==11711== by 0x718328: object_new (object.c:493)
==11711== by 0x4B8A29: qmp_device_list_properties (qmp.c:542)
==11711== by 0x4A9561: qmp_marshal_device_list_properties (qmp-marshal.c:1425)
==11711== by 0x819D4A: do_qmp_dispatch (qmp-dispatch.c:104)
==11711== by 0x819E82: qmp_dispatch (qmp-dispatch.c:131)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170801160419.14180-1-marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
migrate-set-parameters sets migration parameters according to is
arguments like this:
* Present means "set the parameter to this value"
* Absent means "leave the parameter unchanged"
* Except for parameters tls_creds and tls_hostname, "" means "reset
the parameter to its default value
The first two are perfectly normal: presence of the parameter makes
the command do something.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is neither a valid TLS credentials ID, nor a valid
host name.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "reset to default" is not general, as
suitable invalid values need not exist. I also find it ugly.
To clean this up, we could add a separate flag argument to ask for
"reset to default", or add a distinct value to @tls_creds and
@tls_hostname. This commit implements the latter: add JSON null to
the values of @tls_creds and @tls_hostname, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_migrate_set_parameters() rewrite null
to "" before anything else can see the null. The proper way to do it
would be rewriting "" to null, but that requires fixing up code to
work with null. Add TODO comments for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit de63ab6 "migrate: Share common MigrationParameters struct"
reused MigrationParameters for the arguments of
migrate-set-parameters, with the following rationale:
It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional. We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands. The next patch can then reduce the amount of
code needed on input.
I need to unshare them to correct a design flaw in a stupid, but
minimally invasive way, in the next commit. We can restore the
sharing when we redo that patch in a less stupid way. Add a suitable
TODO comment.
Note that I revert only the sharing part of commit de63ab6, not the
part that made the members of query-migrate-parameters' result
optional. The schema (and thus introspection) remains inaccurate for
query-migrate-parameters. If we decide not to restore the sharing, we
should revert that part, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qmp_query_migrate_parameters() and qmp_migrate_set_parameters()
effectively duplicate QAPI_CLONE() inline. Add suitable TODO
comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Optional MigrationParameters members tls_creds and tls_hostname can't
actually be absent outside qmp_migrate_set_parameters() since commit
4af245d (v2.9.0).
Note that commit 4af245d reverted the part of commit de63ab6 (v2.8.0)
that made tls_creds and tls_hostname absent instead of "" in the value
of query-migrate-parameters, even though commit de63ab6 called that a
mistake. What a mess.
Drop the redundant tests for presence, and update documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Checks validity for all the capabilities that we enabled with command
line.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1500349150-13240-11-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Abstracted from migrate_set_block_enabled() to allocate
MigrationCapabilityStatusList properly.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-10-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Abstract helper function to check migration capabilities (from the old
qmp_migrate_set_capabilities). Prepare to be used somewhere else.
There is side effect on the change: when applying the capabilities, we
were skipping the invalid ones, but still applying the valid ones (if
they are provided in the same QMP request). After this refactoring,
we'll ignore all the capabilities if we detected invalid setup along the
way. However, I don't think it is a problem since general users should
not provide anything invalid after all.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-9-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since commit a15215f3 ("build: remove --enable-colo/--disable-colo"),
colo is always supported. We don't need any colo_supported() now since
it is always true. Removing any extra code that depends on it.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Adding validity check for the migration parameters passed in via global
properties.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1500349150-13240-7-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Abstracted from qmp_migrate_set_parameters().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-6-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Helper to check the parameters. Abstracted from
qmp_migrate_set_parameters().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-5-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Do the same thing to migration capabilities, just like what we did in
previous patch for migration parameters.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-4-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Export migration parameters to qdev properties. Then we can use, for
example:
-global migration.x-cpu-throttle-initial=xxx
To specify migration parameters during init.
Prefix "x-" is appended for each parameter exported to show that this is
not a stable interface, and only for debugging/testing purpose.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-3-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When we issue a cancel and clean up the RDMA channel
send a CONTROL_ERROR to get the destination to quit.
The rdma_cleanup code waits for the event to come back
from the rdma_disconnect; but that wont happen until the
destination quits and there's currently nothing to force
it.
Note this makes the case of a cancel work while the destination
is alive, and it already works if the destination is
truly dead. Note it doesn't fix the case where the destination
is hung (we get stuck waiting for the rdma_disconnect event).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-7-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
control_desc[] is an array of strings that correspond to a
series of message types; they're used only for error messages, but if
the message type is seriously broken then we could go off the end of
the array.
Convert the array to a function control_desc() that bound checks.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170717110936.23314-6-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When waiting for a WRID, if the other side dies we end up waiting
for ever with no way to cancel the migration.
Cure this by poll()ing the fd first with a timeout and checking
error flags and migration state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-5-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The two places that 'goto err_block_for_wrid' weren't setting ret
and so would end up returning 0 even though we've failed.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-4-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Closing the file before exit on a failure allows
the source to cleanup better, especially with RDMA.
Partial fix for https://bugs.launchpad.net/qemu/+bug/1545052
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170717110936.23314-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fix a race where the destination might try and send the source a
WRID_READY before the source has done a post-recv for it.
rdma_post_recv has to happen after the qp exists, and we're
OK since we've already called qemu_rdma_source_init that calls
qemu_alloc_qp.
This corresponds to:
https://bugzilla.redhat.com/show_bug.cgi?id=1285044
The race can be triggered by adding a few ms wait before this
post_recv_control (which was originally due to me turning on loads of
debug).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20170717110936.23314-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, be consistent and use
compress_thread_{save,load}_{setup,cleanup}.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-6-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Once there, I rename ram_migration_cleanup() to ram_save_cleanup().
Notice that this is the first pass, and I only passed XBZRLE to the
new scheme. Moved decoded_buf to inside XBZRLE struct.
As a bonus, I don't have to export xbzrle functions from ram.c.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
loaded_data pointer was needed because called can change it (dave)
spell loaded correctly in comment (dave)
Message-Id: <20170628095228.4661-5-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need to do things at load time and at cleanup time.
Signed-off-by: Juan Quintela <quintela@redhat.com>
--
Move the printing of the error message so we can print the device
giving the error.
Add call to postcopy stuff
Message-Id: <20170628095228.4661-4-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need a cleanup for loads, so we rename here to be consistent.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Rename htab_cleanup to htap_save_cleanup as dave suggestion
Message-Id: <20170628095228.4661-3-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are going to use it now for more than save live regions.
Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-2-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[Peter collected Eduardo's patch comment and formatted into patch]
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-5-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MigrateState object is not ready at that time, so we'll get an
assertion. Use qemu_global_option() instead.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Fixes: 3df663e ("migration: move only_migratable to MigrationState")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1499242883-2184-2-git-send-email-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. In the common case, allocation is unlikely to ever use
values that are not naturally sector-aligned, but it is possible
that byte-based values will let us be more precise about allocation
at the end of an unaligned file that can do byte-based access.
Changing the signature of the function to use int64_t *pnum ensures
that the compiler enforces that all callers are updated. For now,
the io.c layer still assert()s that all callers are sector-aligned
on input and that *pnum is sector-aligned on return to the caller,
but that can be relaxed when a later patch implements byte-based
block status. Therefore, this code adds usages like
DIV_ROUND_UP(,BDRV_SECTOR_SIZE) to callers that still want aligned
values, where the call might reasonbly give non-aligned results
in the future; on the other hand, no rounding is needed for callers
that should just continue to work with byte alignment.
For the most part this patch is just the addition of scaling at the
callers followed by inverse scaling at bdrv_is_allocated(). But
some code, particularly bdrv_commit(), gets a lot simpler because it
no longer has to mess with sectors; also, it is now possible to pass
NULL if the caller does not care how much of the image is allocated
beyond the initial offset. Leave comments where we can further
simplify once a later patch eliminates the need for sector-aligned
requests through bdrv_is_allocated().
For ease of review, bdrv_is_allocated_above() will be tackled
separately.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When this capability is enabled, QEMU will use the return path even for
precopy migration. This is helpful at least in one case when destination
failed to load the image while source quited without confirmation. With
return path, source will wait for the last response from destination,
and if destination fails, it'll fail the migration on source, then the
guest can be run again on the source (rather than assuming to be good,
then the guest will be lost after source quits).
It needs to be enabled explicitly on source, otherwise disabled.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498472935-14461-1-git-send-email-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.
Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It'll be strange that the migration object inherits TYPE_DEVICE. Add
some explanations to it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498634144-26508-1-git-send-email-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now we have some globals that can be configured for migration. Dump them
in HMP info migration for better debugging.
(we can also use this to monitor whether COMPAT fields are applied
correctly on compatible machines)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-11-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These two parameters:
- MachineState::enforce_config_section
- MigrationState::send_configuration
are playing similar role here. This patch merges the first one into
second, then we'll have a single place to reference whether we need to
send the configuration section.
I didn't remove the MachineState.enforce_config_section field since when
applying that machine property (in machine_set_property()) we haven't
yet initialized global properties and migration object. Then, it's
still not easy to pass that boolean to MigrationState at such an early
time.
A natural benefit for current patch is that now we kept the meaning of
"enforce-config-section" since it'll still have the highest
priority (that's what "enforce" mean I guess).
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-10-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Move it into MigrationState, revert its meaning and renaming it to
send_section_footer, with a property bound to it. Same trick is played
like previous patches.
Removing savevm_skip_section_footers().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-9-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was in SaveState but now moved to MigrationState altogether, reverted
its meaning, then renamed to "send_configuration". Again, using
HW_COMPAT_2_3 for old PC/SPAPR machines, and accel_register_prop() for
xen_init().
Removing savevm_skip_configuration().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One less global variable, and it does only matter with migration.
We keep the old "--only-migratable" option, but also now we support:
-global migration.only-migratable=true
Currently still keep the old interface.
Hmm, now vl.c has no way to access migrate_get_current(). Export a
function for it to setup only_migratable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-7-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Put it into MigrationState then we can use the properties to specify
whether to enable storing global state.
Removing global_state_set_optional() since now we can use HW_COMPAT_2_3
for x86/power, and AccelClass.global_props for Xen.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-6-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let the old man "MigrationState" join the object family. Direct benefit
is that we can start to use all the property features derived from
current QDev, like: HW_COMPAT_* bits, command line setup for migration
parameters (so will never need to set them up each time using HMP/QMP,
this is really, really attractive for test writters), etc.
I see no reason to disallow this happen yet. So let's start from this
one, to see whether it would be anything good.
Now we init the MigrationState struct statically in main() to make sure
it's initialized after global properties are applied, since we'll use
them during creation of the object.
No functional change at all.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-5-git-send-email-peterx@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
migration_incoming_state_destroy() uses qemu_fclose() on the vmstate
file. Make sure to call it inside an AioContext acquire/release region.
This fixes an 'qemu: qemu_mutex_unlock: Operation not permitted' abort
in loadvm.
This patch closes the vmstate file before ending the drained region.
Previously we closed the vmstate file after ending the drained region.
The order does not matter.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk/bdrv_drain_all() only takes effect for a single instant and then
resumes block jobs, guest devices, and other external clients like the
NBD server. This can be handy when performing a synchronous drain
before terminating the program, for example.
Monitor commands usually need to quiesce I/O across an entire code
region so blk/bdrv_drain_all() is not suitable. They must use
bdrv_drain_all_begin/end() to mark the region. This prevents new I/O
requests from slipping in or worse - block jobs completing and modifying
the graph.
I audited other blk/bdrv_drain_all() callers but did not find anything
that needs a similar fix. This patch fixes the savevm/loadvm commands.
Although I haven't encountered a read world issue this makes the code
safer.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
AioContext was designed to allow nested acquire/release calls. It uses
a recursive mutex so callers don't need to worry about nesting...or so
we thought.
BDRV_POLL_WHILE() is used to wait for block I/O requests. It releases
the AioContext temporarily around aio_poll(). This gives IOThreads a
chance to acquire the AioContext to process I/O completions.
It turns out that recursive locking and BDRV_POLL_WHILE() don't mix.
BDRV_POLL_WHILE() only releases the AioContext once, so the IOThread
will not be able to acquire the AioContext if it was acquired
multiple times.
Instead of trying to release AioContext n times in BDRV_POLL_WHILE(),
this patch simply avoids nested locking in save_vmstate(). It's the
simplest fix and we should step back to consider the big picture with
all the recent changes to block layer threading.
This patch is the final fix to solve 'savevm' hanging with -object
iothread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Version: GnuPG v2
iQEtBAABCAAXBQJZQyPmEBxmYW16QHJlZGhhdC5jb20ACgkQyjViTGqRccaWrgf/
SCAHpi4gzWbr7AN03jP16Qy/kqNik6F7LTNSqrRbvBPb3TNchDd4z44SAghK5m/r
+IlYQc20sBZ60tRHIHAUSF2WNcea2pj1v3ZVgjrI7hiJ3DXPiqqt/dAR/W/BLIDO
tAHAVF6Pnrjm9DC4d2zATLDHvcHMzWOsnePh7XcOm44REbwUr3GDg6bf2+j+5yfS
9ewmXfh8z4w1IvSn+f5B+IeCvGvJNA1D55dqcGo8Ivlg9PnElziXFaXO2s7UiLIM
mF3eTSIbJQNNN+E+0lpRpnqQiq+Txxggu61Q4f8bOTBhEOPa3etj1ydnXMVbvX25
6SUuBfGh51tyOIZOJz3GtA==
=9b+J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/docker-and-block-pull-request' into staging
# gpg: Signature made Fri 16 Jun 2017 01:18:46 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/docker-and-block-pull-request: (23 commits)
block: make accounting thread-safe
block: split BlockAcctStats creation and setup
block: introduce block_account_one_io
block: protect modification of dirty bitmaps with a mutex
migration/block: reset dirty bitmap before reading
block: introduce dirty_bitmap_mutex
block: protect tracked_requests and flush_queue with reqs_lock
block: access write_gen with atomics
block: use Stat64 for wr_highest_offset
util: add stats64 module
throttle-groups: protect throttled requests with a CoMutex
throttle-groups: do not use qemu_co_enter_next
throttle-groups: only start one coroutine from drained_begin
block: access io_plugged with atomic ops
block: access wakeup with atomic ops
block: access serialising_in_flight with atomic ops
block: access io_limits_disabled with atomic ops
block: access quiesce_counter with atomic ops
block: access copy_on_read with atomic ops
docker: Add flex and bison to centos6 image
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously, dst side will immediately try to lock the write byte upon
receiving QEMU_VM_EOF, but at src side, bdrv_inactivate_all() is only
done after sending it. If the src host is under load, dst may fail to
acquire the lock due to racing with the src unlocking it.
Fix this by hoisting the bdrv_inactivate_all() operation before
QEMU_VM_EOF.
N.B. A further improvement could possibly be done to cleanly handover
locks between src and dst, so that there is no window where a third QEMU
could steal the locks and prevent src and dst from running.
N.B. This commit includes a minor improvement to the error handling
by using qemu_file_set_error().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170616160658.32290-1-famz@redhat.com
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[PMM: noted qemu_file_set_error() use in commit as suggested by Daniel]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Any data that is returned by read may be stale already, the bitmap
has to be cleared before issuing the read.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-16-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
I removed the [HACK] part because previous patch just check that
compression pages are not received.
Right now, if we receive a compressed page while this features are
disabled, Bad Things (TM) can happen. Just add a test for them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
I had XBZRLE here also, but it don't need extra resources on
destination, only on source. Additionally libvirt don't enable it on
destination, so don't put it here.
- initialize invalid_flags at declaration time.
- remove extra space (peter)
0425dc9 is actually v1 of that patch, but it was accidentally
merged (while there was a v2). That will cause problem when we try to
migrate to some old QEMUs when return path is not really there. Let's
fix it, then squashing this patch with 0425dc9 will be exactly patch
content of v2.
Fixes: 0425dc9 ("migration: isolate return path on src")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Nothing uses it outside of migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
It don't belong anywhere else, just the global state where everybody
can stick other things.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
So, move them there. Notice that we export functions that send
commands, not the command themselves.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
They are indpendent, and nowadays almost every device register things
with qdev->vmsd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
All callers were calling migrate_get_current(), so do it inside the function.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Merge them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Once there, create populate_disk_info.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
--
- create populate_disk_info instead of "abusing" populate_ram_info
Assigning directly to *errp is not valid, as errp may be NULL,
&error_fatal, or &error_abort. Use error_propagate() instead.
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are some places that binded "return path" with postcopy. Let's be
prepared for its usage even without postcopy. This patch mainly did this
on source side.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need to release any block migrations BlockBackends on the source
before successfully completing the migration because otherwise
inactivating the images will fail (inactivation only tolerates device
BBs).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Block migration may still access the image during its
.save_live_complete_precopy() implementation, so we should only
inactivate the image afterwards.
Another reason for the change is that inactivating an image fails when
there is still a non-device BlockBackend using it, which includes the
BBs used by block migration. We want to give block migration a chance to
release the BBs before trying to inactivate the image (this will be done
in another patch).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
In load_snapshot, mis->from_src_file is freed twice, the first free is by
qemu_fclose, the second is by migration_incoming_state_destroy and
it causes Illegal instruction exception. The fix is just to remove the
first free.
This problem is found by qemu-iotests case 068 since commit
"660819b migration: shut src return path unconditionally". The error is:
068 1s ... - output mismatch (see 068.out.bad)
--- tests/qemu-iotests/068.out 2017-05-06 01:00:26.417270437 +0200
+++ 068.out.bad 2017-06-03 13:59:55.360274640 +0200
@@ -6,6 +6,8 @@
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm 0
(qemu) quit
+./common.config: line 107: 242472 Illegal instruction (core dumped) ( if [ -n "${QEMU_NEED_PID}" ]; then
+ echo $BASHPID > "${QEMU_TEST_DIR}/qemu-${_QEMU_HANDLE}.pid";
+fi; exec "$QEMU_PROG" $QEMU_OPTIONS "$@" )
QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) quit
-*** done
+(qemu) *** done
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We create the variable while we are at migration and we remove it
after migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RAM Statistics need to survive migration to make info migrate work, so we
need to store them outside of RAMState. As we already have an struct
with those fields, just used them. (MigrationStats and XBZRLECacheStats).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
It was only used by XBZRLE anyways.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We shouldn't be using memory later than that.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
As a rule, CPU internal state should never be updated when
!cpu->kvm_vcpu_dirty (or the HAX equivalent). If that is done, then
subsequent calls to cpu_synchronize_state() - usually safe and idempotent -
will clobber state.
However, we routinely do this during a loadvm or incoming migration.
Usually this is called shortly after a reset, which will clear all the cpu
dirty flags with cpu_synchronize_all_post_reset(). Nothing is expected
to set the dirty flags again before the cpu state is loaded from the
incoming stream.
This means that it isn't safe to call cpu_synchronize_state() from a
post_load handler, which is non-obvious and potentially inconvenient.
We could cpu_synchronize_all_state() before the loadvm, but that would be
overkill since a) we expect the state to already be synchronized from the
reset and b) we expect to completely rewrite the state with a call to
cpu_synchronize_all_post_init() at the end of qemu_loadvm_state().
To clear this up, this patch introduces cpu_synchronize_pre_loadvm() and
associated helpers, which simply marks the cpu state as dirty without
actually changing anything. i.e. it says we want to discard any existing
KVM (or HAX) state and replace it with what we're going to load.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dave Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
We can replace the four remaining calls of register_savevm() by
calls to register_savevm_live(). So we can remove the function and
as we don't allocate anymore the ops pointer with g_new0()
we don't have to free it then.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All functions were internal, except blk_mig_init() that is exported in
misc.h now.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All functions are internal except for ram_mig_init(). Create
migration/misc.h for this kind of functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Start removing migration code from sysemu/sysemu.h.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Just for the functions exported from tls.c. Notice that we can't
remove the migration/migration.h include from tls.c because it access
directly MigrationState for the tls params.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Split the file into public and internal interfaces. I have to rename
the external one because we can't have two include files with the same
name in the same directory. Build system gets confused. The only
exported functions are the ones that handle basic types.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We were do the shutting off only for postcopy. Now we do this as long as
the source return path is there.
Moving the cleanup of from_src_file there too.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The return path channel is possibly leaked. Fix it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Everything else assumes that we always load a device from its own
savevm handler.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
So we remove all traces of them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is no reason for having the loadvm_handlers at all. There is
only one use, and we can use the savevm handlers.
We will remove the loadvm handlers on a following patch.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
- Added load_version_id: version_id read from the stream (laurent)
- Added load_section_id: section_id read from the stream (dave)
The commit message from 070afca25 suggests that dirty_rate_high_cnt
should be used more aggressively to start throttling after two
iterations instead of four. The code, however, only changes the auto
convergence behaviour to throttle after three iterations. This makes the
behaviour more aggressive by kicking off throttling after two iterations
as originally intended.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The bytes_xfer_now/prev counters are only used by the auto convergence
logic. However, they are used alongside the dirty_pages_rate counter,
which is calculated (and required) outside of this logic. The problem
with this approach is that if the auto convergence capability is changed
while a migration is ongoing, the relationship of the counters will be
broken.
This moves the management of bytes_xfer_now/prev counters outside of the
auto convergence logic to address this issue.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently, a "period" in the RAM migration logic is at least a second
long and accounts for what happened since the last period (or the
beginning of the migration). The dirty_pages_rate counter is calculated
at the end this logic.
If the auto convergence capability is enabled from the start of the
migration, it won't be able to use this counter the first time around.
This calculates dirty_pages_rate as soon as a period is deemed over,
which allows for it to be used immediately.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The first time migration_bitmap_sync() is called, bytes_xfer_prev is set
to ram_state.bytes_transferred which is, at this point, zero. The next
time migration_bitmap_sync() is called, an iteration has happened and
bytes_xfer_prev is set to 'x' bytes. Most likely, more than one second
has passed, so the auto converge logic will be triggered and
bytes_xfer_now will also be set to 'x' bytes.
This condition is currently masked by dirty_rate_high_cnt, which will
wait for a few iterations before throttling. It would otherwise always
assume zero bytes have been copied and therefore throttle the guest
(possibly) prematurely.
Given bytes_xfer_prev is only used by the auto convergence logic, it
makes sense to only set its value after a check has been made against
bytes_xfer_now.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This removes last trace of migration functions from sysemu/sysemu.h.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
We want to track why a guest was shutdown; in particular, being able
to tell the difference between a guest request (such as ACPI request)
and host request (such as SIGINT) will prove useful to libvirt.
Since all requests eventually end up changing shutdown_requested in
vl.c, the logical change is to make that value track the reason,
rather than its current 0/1 contents.
Since command-line options control whether a reset request is turned
into a shutdown request instead, the same treatment is given to
reset_requested.
This patch adds an internal enum ShutdownCause that describes reasons
that a shutdown can be requested, and changes qemu_system_reset() to
pass the reason through, although for now nothing is actually changed
with regards to what gets reported. The enum could be exported via
QAPI at a later date, if deemed necessary, but for now, there has not
been a request to expose that much detail to end clients.
For the most part, we turn 0 into SHUTDOWN_CAUSE_NONE, and 1 into
SHUTDOWN_CAUSE_HOST_ERROR; the only specific case where we have enough
information right now to use a different value is when we are reacting
to a host signal. It will take a further patch to edit all call-sites
that can trigger a reset or shutdown request to properly pass in any
other reasons; this patch includes TODOs to point such places out.
qemu_system_reset() trades its 'bool report' parameter for a
'ShutdownCause reason', with all non-zero values having the same
effect; this lets us get rid of the weird #defines for VMRESET_*
as synonyms for bools.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It only needed TARGET_PAGE_SIZE/BITS/BITS_MIN values, so just export
them from exec.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
That is the only function that we need from exec.c, and having to
include the whole sysemu.h for this.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
/me leans to be less sloppy with copyright notices
thanks Dave
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
Minor rearrangements due to rebase
Now one just has the interperter, and the other has the basic types.
Once there, add copyright boilerplate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Use GPL v2 or later. Detected by David.
Peter Xu
Dr. David Alan Gilbert
Juan Quintela
Eric Blake
Peter Lieven
Alexey Perevalov
Vladimir Sementsov-Ogievskiy
Fam Zheng
Markus Armbruster
Marc-André Lureau
Philippe Mathieu-Daudé
Halil Pasic
Stefan Hajnoczi
Peter Maydell
Paolo Bonzini
Eduardo Habkost
Kevin Wolf
QingFeng Hao
David Gibson
Laurent Vivier
Felipe Franciosi