Commit Graph

28 Commits

Author SHA1 Message Date
lijun
7251711472 usb: delete redundant brackets in usb_host_handle_control()
When see usb codes, find there are redundant brackets !((udev->port->speedmask
& USB_SPEED_MASK_SUPER)) here. So delete it.

Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-12-10 11:24:35 +03:00
Gerd Hoffmann
79ae25af15 usb-host: fix usb_host_speed_compat tyops
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2014-11-12 15:27:23 +01:00
Chris Johns
1e03e40784 Provide the missing LIBUSB_LOG_LEVEL_* for older libusb or FreeBSD. Providing just the needed value as a defined.
Signed-off-by: Chris Johns <chrisj@rtems.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-11 08:48:16 +01:00
Gonglei
d749e10c4f bootindex: move calling add_boot_device_patch to bootindex setter function
On this way, we can assure the new bootindex take effect
during vm rebooting.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 10:46:01 +02:00
Gonglei
e6adae52b1 host-libusb: remove bootindex property from qdev to qom
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:52:54 +02:00
Gonglei
2e6a0dd1ac libusb: using error_report instead of fprintf
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:07 +02:00
Gonglei
2aa76dc18c libusb: convert init to realize
In this way, all the implementations now use
error_setg instead of error_report for reporting error.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:07 +02:00
Gonglei
7d553f27fc usb-bus: convert USBDeviceClass init to realize
Add "realize/unrealize" in USBDeviceClass, which has errp
as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.

Note: this patch still keep "init" in USBDeviceClass, and
call kclass->init in usb_device_realize(), avoid breaking
git bisect. After realize all usb devices, will be removed.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:06 +02:00
Jincheng Miao
3ce2144538 usb: initialize libusb_device to avoid crash
If libusb_get_device_list() fails, the uninitialized local variable
libusb_device would be passed to libusb_free_device_list(), that
will cause a crash, like:
(gdb) bt
 #0  0x00007fbbb4bafc10 in pthread_mutex_lock () from /lib64/libpthread.so.0
 #1  0x00007fbbb233e653 in libusb_unref_device (dev=0x6275682d627375)
     at core.c:902
 #2  0x00007fbbb233e739 in libusb_free_device_list (list=0x7fbbb6e8436e,
     unref_devices=<optimized out>) at core.c:653
 #3  0x00007fbbb6cd80a4 in usb_host_auto_check (unused=unused@entry=0x0)
     at hw/usb/host-libusb.c:1446
 #4  0x00007fbbb6cd8525 in usb_host_initfn (udev=0x7fbbbd3c5670)
     at hw/usb/host-libusb.c:912
 #5  0x00007fbbb6cc123b in usb_device_init (dev=0x7fbbbd3c5670)
     at hw/usb/bus.c:106
 ...

So initialize libusb_device at the begin time.

Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-01 13:26:37 +02:00
Gerd Hoffmann
f3cda6e060 usb-host: add range checks for usb-host parameters
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-13 12:34:57 +02:00
Gerd Hoffmann
322fd1f4f7 usb-host: add HAVE_STREAMS define 2014-06-02 16:29:00 +02:00
Gerd Hoffmann
b88a3e01f5 usb-host: allow attaching usb3 devices to ehci
Extend compatibility test function to also figure whenever usb3
devices can be supported on ehci.  Tweak ep0 maxpacketsize field
due to usb2 <-> usb3 difference.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02 16:28:59 +02:00
Hans de Goede
8d1bd3c901 usb-host-libusb: Set stream id when submitting bulk-stream transfers
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:41:07 +02:00
Hans de Goede
56a9f18051 usb-host-libusb: Add alloc / free streams ops
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:41:07 +02:00
Hans de Goede
b664b80f19 usb-host-libusb: Fill in endpoint max_streams when available
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26 08:41:07 +02:00
Paolo Bonzini
c7bcc85d66 qdev: Remove hex8/32/64 property types
Replace them with uint8/32/64.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:12:04 +01:00
Hans de Goede
f34d5c7508 usb-host-libusb: Detach kernel drivers earlier
If we detach the kernel drivers on the first set_config, then they will
be still attached when the device gets its initial reset. Causing the drivers
to re-initialize the device after the reset, dirtying the device state.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-10-22 16:28:49 +02:00
Hans de Goede
1294ca797c usb-host-libusb: Configuration 0 may be a valid configuration
Quoting from: linux/Documentation/ABI/stable/sysfs-bus-usb:

	Note that some devices, in violation of the USB spec, have a
	configuration with a value equal to 0. Writing 0 to
	bConfigurationValue for these devices will install that
	configuration, rather then unconfigure the device.

So don't compare the configuration value against 0 to check for unconfigured
devices, instead check for a LIBUSB_ERROR_NOT_FOUND return from
libusb_get_active_config_descriptor().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-10-22 16:28:49 +02:00
Hans de Goede
5af35d7fec usb-host-libusb: Fix reset handling
The guest will issue an initial device reset when the device is attached, but
since the current usb-host-libusb code only actually does the reset when
udev->configuration != 0, and on attach the device is not yet configured,
the reset gets ignored. This means that the device gets passed to the guest
in an unknown state, which is not good.

The udev->configuration check is there because of the release / claim
interfaces done around the libusb_device_reset call, but these are not
necessary. If interfaces are claimed when libusb_device_reset gets called
libusb will release + reclaim them itself.

The usb_host_ep_update call also is not necessary. If the reset succeeds the
original config and interface alt settings will be restored.

Last if the reset fails, that means the device has either disconnected or
morphed into an another device and has been completely re-enumerated,
so it is treated by the host as a new device and our handle is invalid,
so on reset failure we need to call usb_host_nodev().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-10-22 16:28:48 +02:00
Alex Bligh
bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Marcel Apfelbaum
125ee0ed9c devices: Associate devices to their logical category
The category will be used to sort the devices displayed in
the command line help.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
Gerd Hoffmann
628e54857a usb-host-libusb: set USB_DEV_FLAG_IS_HOST
... like host-{linux,bsd}.c do.

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24 08:40:54 +02:00
Hans de Goede
bc45de8c21 usb/host-libusb: Fix building with libusb git master code
The next libusb release will deprecate libusb_get_port_path, and since
we compile with -Werror, this breaks the build.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24 08:33:11 +02:00
Ed Maste
45ec267160 host-libusb: Correct test for USB packet state
USB_RET_ASYNC is -6, so inflight was always false.

Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03 07:17:12 +02:00
Gerd Hoffmann
c3268cc113 usb-host: add usb_host_full_speed_compat
Alloes to pass through usb2 devices on usb1 host controllers if possible.
Brings the libusb implementation to feature-parity with the linux usbfs
code, so the usb-host implementation in 1.5 (libusb) doesn't regress
compared to 1.4 (usbfs).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07 11:34:02 +02:00
Gerd Hoffmann
95efb20c71 usb-host: live migration support for the libusb version
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07 08:19:14 +02:00
Gerd Hoffmann
3f5cc97e2b usb-host: raise libusbx minimum version to 1.0.13
Allows to remove one FIXME.  Makes LIBUSB_LOG_LEVEL_WARNING build errors
go away.  And starting with that version libusb has a LIBUSBX_API_VERSION
define which allows to easily #ifdef version dependencies should that
need arrive in the future.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-23 08:43:10 +02:00
Gerd Hoffmann
2b2325ff64 use libusb for usb-host
Reimplement usb-host on top of libusb.
Reasons to do this:

 (1) Largely rewritten from scratch, nice opportunity to kill historical
     cruft.
 (2) Offload usbfs handling to libusb.
 (3) Have a single portable code base instead of bsd + linux variants.
 (4) Bring usb-host support to any platform supported by libusbx.

For now this goes side-by-side to the existing code.  That is only to
simplify regression testing though, at the end of the day I want remove
the old code and support libusb exclusively.  Merge early in 1.5 cycle,
remove the old code after 1.5 release or something like this.

Thanks to qdev the old and new code can coexist nicely on linux.  Just
use "-device usb-host-linux" to use the old linux driver instead of the
libusb one (which takes over the "usb-host" name).

The bsd driver isn't qdev'ified so it isn't that easy for bsd.
I didn't bother making it runtime switchable, so you have to rebuild
qemu with --disable-libusb to get back the old code.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16 12:04:09 +02:00