Currently, curl defines its own constant SECTOR_SIZE. There is no
advantage over using the global BDRV_SECTOR_SIZE, so drop it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20161025025431.24714-2-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Because TFTP does not support byte ranges, it was never usable with our
curl block driver. Since apparently nobody has ever complained loudly
enough for someone to take care of the issue until now, it seems
reasonable to assume that nobody has ever actually used it.
Therefore, it should be safe to just drop it from curl's protocol list.
[Jeff Cody: Below is additional summary pulled, with some rewording,
from followup emails between Max and Markus, to explain what
worked and what didn't]
TFTP would sometimes work, to a limited extent, for images <= the curl
"readahead" size, so long as reads started at offset zero. By default,
that readahead size is 256KB.
Reads starting at a non-zero offset would also have returned data from a
zero offset. It can become more complicated still, with mixed reads at
zero offset and non-zero offsets, due to data buffering.
In short, TFTP could only have worked before in very specific scenarios
with unrealistic expectations and constraints.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20161102175539.4375-4-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
In some cases it is possible that query-io-status is called just
before the job is completed, causing
-{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "src", "len": 31457280, "offset": OFFSET, "speed": 0, "type": "mirror", "error": "Operation not permitted"}}
-{"return": []}
+{"return": [{"io-status": "ok", "device": "src", "busy": true, "len": 31457280, "offset": OFFSET, "paused": false, "speed": 0, "ready": false, "type": "mirror"}]}
Assert that the completeion event eventually happens.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161109162008.27287-1-pbonzini@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Add a regression test for the case found by Vladimir.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478587839-9834-7-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Refactor backup_start as backup_job_create, which only creates the job,
but does not automatically start it. The old interface, 'backup_start',
is not kept in favor of limiting the number of nearly-identical interfaces
that would have to be edited to keep up with QAPI changes in the future.
Callers that wish to synchronously start the backup_block_job can
instead just call block_job_start immediately after calling
backup_job_create.
Transactions are updated to use the new interface, calling block_job_start
only during the .commit phase, which helps prevent race conditions where
jobs may finish before we even finish building the transaction. This may
happen, for instance, during empty block backup jobs.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1478587839-9834-6-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Instead of automatically starting jobs at creation time via backup_start
et al, we'd like to return a job object pointer that can be started
manually at later point in time.
For now, add the block_job_start mechanism and start the jobs
automatically as we have been doing, with conversions job-by-job coming
in later patches.
Of note: cancellation of unstarted jobs will perform all the normal
cleanup as if the job had started, particularly abort and clean. The
only difference is that we will not emit any events, because the job
never actually started.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1478587839-9834-5-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Add an explicit start field to specify the entrypoint. We already have
ownership of the coroutine itself AND managing the lifetime of the
coroutine, let's take control of creation of the coroutine, too.
This will allow us to delay creation of the actual coroutine until we
know we'll actually start a BlockJob in block_job_start. This avoids
the sticky question of how to "un-create" a Coroutine that hasn't been
started yet.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478587839-9834-4-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Cleaning up after we have deferred to the main thread but before the
transaction has converged can be dangerous and result in deadlocks
if the job cleanup invokes any BH polling loops.
A job may attempt to begin cleaning up, but may induce another job to
enter its cleanup routine. The second job, part of our same transaction,
will block waiting for the first job to finish, so neither job may now
make progress.
To rectify this, allow jobs to register a cleanup operation that will
always run regardless of if the job was in a transaction or not, and
if the transaction job group completed successfully or not.
Move sensitive cleanup to this callback instead which is guaranteed to
be run only after the transaction has converged, which removes sensitive
timing constraints from said cleanup.
Furthermore, in future patches these cleanup operations will be performed
regardless of whether or not we actually started the job. Therefore,
cleanup callbacks should essentially confine themselves to undoing create
operations, e.g. setup actions taken in what is now backup_start.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478587839-9834-3-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Though it is not intended to be reached through normal circumstances,
if we do not gracefully deconstruct the transaction QLIST, we may wind
up with stale pointers in the list.
The rest of this series attempts to address the underlying issues,
but this should fix list inconsistencies.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1478587839-9834-2-git-send-email-jsnow@redhat.com
[Rewrote commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
The new powernv machine ships with a firmware that outputs
some text to the serial console, so we can automatically
test this machine type in the boot-serial tester, too.
And to get some (very limited) test coverage for the new
POWER9 CPU emulation, too, this test is also started with
"-cpu POWER9".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a couple of tests on the XSCOM bus of the PowerNV machine for the
the POWER8 and POWER9 CPUs. The first tests reads the CFAM identifier
of the chip. The second test goes further in the XSCOM address space
and reaches the cores to read their DTS registers.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fixed an incorrect indentation, and a Makefile problem]]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the pnv machine type is compiled on a 32-bit host, the unsigned long
(host) type is 32-bit. This means that the hweight_long() used to
calculate the number of allowed cores only considers the low 32 bits of
the cores_mask variable, and can thus return 0 in some circumstances.
This corrects the bug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Suggested-by: Richard Henderson <rth@twiddle.net>
[clg: replaced hweight_long() by ctpop64() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
High addresses can overflow the uint32_t pcba variable after the 8byte
shift.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The XSCOM addresses for the core registers are encoded in a slightly
different way on POWER8 and POWER9.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using the serial console in the GTK interface of QEMU (and
QEMU has been compiled with CONFIG_VTE), it is possible to trigger
the assert() statement in vty_receive() in spapr_vty.c by pasting
a chunk of text with length > 16 into the QEMU window.
Most of the other serial backends seem to simply drop characters
that they can not handle, so I think we should also do the same in
spapr-vty to fix this issue.
Buglink: https://bugs.launchpad.net/qemu/+bug/1639322
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As per the ISA we need a cause and executing a tabort r9 in libc
for example causes a EXCP_FU exception, we don't wire up the
IC (cause) when we post the exception. The cause is required
for the kernel to do the right thing. The fix applies only to 64
bit ppc targets.
Signed-off-by: Balbir singh <bsingharora@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
daa2369 "spapr_pci: Add a 64-bit MMIO window" subtly broke migration from
qemu-2.7 to the current version. It split the device's MMIO window into
two pieces for 32-bit and 64-bit MMIO.
The patch included backwards compatibility code to convert the old property
into the new format. However, the property value was also transferred in
the migration stream and compared with a (probably unwise) VMSTATE_EQUAL.
So, the "raw" value from 2.7 is compared to the new style converted value
from (pre-)2.8 giving a mismatch and migration failure.
Although it would be technically possible to fix this in a way allowing
backwards migration, that would leave an ugly legacy around indefinitely.
This patch takes the simpler approach of bumping the migration version,
dropping the unwise VMSTATE_EQUAL (and some equally unwise ones around it)
and ignoring them on an incoming migration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
bcdctz. converts from BCD to Zoned numeric format. Zoned format uses
a byte to represent a digit where the most significant nibble is 0x3
or 0xf, depending on the preferred signal.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdcfz. converts from Zoned numeric format to BCD. Zoned format uses
a byte to represent a digit where the most significant nibble is 0x3
or 0xf, depending on the preferred signal.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdctn. converts from BCD to National numeric format. National format
uses a byte to represent a digit where the most significant nibble is
always 0x3 and the least sign. nibbles is the digit itself.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdcfn. converts from National numeric format to BCD. National format
uses a byte to represent a digit where the most significant nibble is
always 0x3 and the least sign. nibbles is the digit itself.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The CPU model table includes stub (commented out) definitions for
CPU_POWERPC_POWER6_5 and CPU_POWERPC_POWER6A. These are not real cpu
models, but represent the POWER6 in some compatiblity modes. If we ever
do implement POWER6 (unlikely), we'll implement its compatibility modes in
a different way (similar to what we do for POWER7 and POWER8). So these
stub definitions can be removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
PnvChip is defined twice and this can confuse old compilers :
CC ppc64-softmmu/hw/ppc/pnv_xscom.o
In file included from qemu.git/hw/ppc/pnv.c:29:
qemu.git/include/hw/ppc/pnv.h:60: error: redefinition of typedef ‘PnvChip’
qemu.git/include/hw/ppc/pnv_xscom.h:24: note: previous declaration of ‘PnvChip’ was here
make[1]: *** [hw/ppc/pnv.o] Error 1
make[1]: *** Waiting for unfinished jobs....
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
powernv has some code (derived from the spapr equivalent) used in device
tree generation which depends on the CPU's compatibility mode / logical
PVR. However, compatibility modes don't make sense on powernv - at least
not as a property controlled by the host - because the guest in powernv
has full hypervisor level access to the virtual system, and so owns the
PCR (Processor Compatibility Register) which implements compatiblity modes.
Note: the new logic doesn't take into account kvmppc_smt_threads() like the
old version did. However, if core->nr_threads exceeds kvmppc_smt_threads()
then things will already be broken and clamping the value in the device
tree isn't going to save us.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add following POWER ISA 3.0 instructions.
vprtybw: Vector Parity Byte Word
vprtybd: Vector Parity Byte Double Word
vprtybq: Vector Parity Byte Quad Word
Signed-off-by: Ankit Kumar <ankit@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vrldnm: Vector Rotate Left Doubleword then AND with Mask
vrlwnm: Vector Rotate Left Word then AND with Mask
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vrldmi: Vector Rotate Left Dword then Mask Insert
vrlwmi: Vector Rotate Left Word then Mask Insert
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
( use extract[32,64] and rol[32,64], introduce mask helpers in
internal.h )
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All the variants for rol/ror have a bug in case where the shift == 0.
For example rol32, would generate:
return (word << 0) | (word >> 32);
Which though works, would be flagged as a runtime error on clang's
sanitizer.
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu_savevm_state_iterate() expects the iterators to return 1
when they are done, and 0 if there is still something left to do.
However, ram_save_iterate() does not obey this rule and returns
the number of saved pages instead. This causes a fatal hang with
ppc64 guests when you run QEMU like this (also works with TCG):
qemu-img create -f qcow2 /tmp/test.qcow2 1M
qemu-system-ppc64 -nographic -nodefaults -m 256 \
-hda /tmp/test.qcow2 -serial mon:stdio
... then switch to the monitor by pressing CTRL-a c and try to
save a snapshot with "savevm test1" for example.
After the first iteration, ram_save_iterate() always returns 0 here,
so that qemu_savevm_state_iterate() hangs in an endless loop and you
can only "kill -9" the QEMU process.
Fix it by using proper return values in ram_save_iterate().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
if_start() goes through the slirp->if_fastq and slirp->if_batchq
list of pending messages, and accesses ifm->ifq_so->so_nqueued of its
elements if ifm->ifq_so != NULL. When freeing a socket, we thus need
to make sure that any pending message for this socket does not refer
to the socket any more.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Brian Candler <b.candler@pobox.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Test QMP events for a CDROM device with or without a media inserted,
including both guest-initiated and hw-initiated eject/load requests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-7-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Required for tray tests once a medium may have changed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-6-git-send-email-jsnow@redhat.com
[Line length edit --js]
Signed-off-by: John Snow <jsnow@redhat.com>
(1) Add START_STOP_UNIT command to ahci-test suite
(2) Add eject/start macro commands; this is not a data transfer
command so it is not well-served by the existing generic pipeline.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-5-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Sometimes we know we'll get back an error, so let's have the
test framework understand that.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-4-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Wait for an event, but return a copy so we can investigate parameters.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-3-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
blk_eject is only used by scsi-disk and atapi, and in both cases we
only attempt to invoke blk_eject if we have a bona-fide change in
tray state.
The "issue" here is that the tray state does not generate a QMP event
unless there is a medium/BDS attached to the device, so if libvirt et al
are waiting for a tray event to occur from an empty-but-closed drive,
software opening that drive will not emit an event and libvirt will
wait forever.
Change this by modifying blk_eject to always emit an event, instead of
conditionally on a "real" backend eject.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1373264
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Commit 9ef2e93f introduced the concept of tagging ATAPI commands as
NONDATA, but this introduced a regression for certain commands better
described as CONDDATA. read_cd is such a command that both requires
a non-zero BCL if a transfer size is set, but is perfectly content to
accept a zero BCL if the transfer size is 0.
This test adds a regression test for the case where BCL and nb_sectors
are both 0.
Flesh out the CDROM tests by:
(1) Allowing the test to specify a BCL
(2) Allowing the buffer comparison test to compare a 0-size buffer
(3) Fix the BCL specification in libqos (It is LE, not BE)
(4) Add a nice human-readable message for future SCSI command additions
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477970211-25754-4-git-send-email-jsnow@redhat.com
[Line length edit --js]
Signed-off-by: John Snow <jsnow@redhat.com>
These can simply be the size of the number of sectors we're reading,
plus one for a buffer. We don't need them to be any larger.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477970211-25754-3-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
For the purposes of byte_count_limit verification, add a new flag that
identifies read_cd as sometimes returning data, then check the BCL in
its command handler after we know that it will indeed return data.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477970211-25754-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Increase test coverage by adding tests for the macro
VMSTATE_ARRAY_OF_POINTER_TO_STRUCT.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let us de-duplicate some code by introducing an utility function for
saving a chunk of bytes (used when testing load based on wire).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We forgot to assign true to params->has_x_checkpoint_delay parameter
in qmp_query_migrate_parameters.
Without this, qmp command 'query-migrate-parameters' doesn't show the
default value for x-checkpoint-delay option.
This also fixes the fact that HMP was relying on unspecified behavior by
reading x_checkpoint_delay without checking has_x_checkpoint_delay.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is too confusing because it sounds like a BDRVRawState variable.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1477565117-17230-1-git-send-email-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, we only use -machine accel=qtest when qemu is invoked through
the common.qemu functions. However, we always want to use it, so move it
from common.qemu directly into QEMU_OPTIONS.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161017183917.8837-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161012204907.25941-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some block drivers may not be loaded yet, but qemu supports them
nonetheless. bdrv_iterate_format() should report them, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161012204907.25941-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
