Commit Graph

147 Commits

Author SHA1 Message Date
Richard Henderson 084d0497a0 mips-linux-user: Save and restore fpu and dsp from sigcontext
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05 11:58:48 +01:00
Richard Henderson ff97090469 mips-linux-user: Share o32 code for n32 and n64 signals
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05 01:56:52 +01:00
Richard Henderson 2c3c6689b3 mips-linux-user: Delete n32 and n64 signal stubs
Deleting these first makes the next patch much easier to read.
This doesn't cause any sort of compilation failure because we
have not yet enabled n32/n64 compilation.  This is dead code.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05 01:55:39 +01:00
Blue Swirl 02e079c79c Merge branch 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (31 commits)
  PPC: linux-user: Calculate context pointer explicitly
  target-ppc: Error out for -cpu host on unknown PVR
  target-ppc: Slim conversion of model definitions to QOM subclasses
  PPC: Bring EPR support closer to reality
  PPC: KVM: set has-idle in guest device tree
  kvm: Update kernel headers
  openpic: fix CTPR and de-assertion of interrupts
  openpic: move IACK to its own function
  openpic: IRQ_check: search the queue a word at a time
  openpic: fix sense and priority bits
  openpic: add some bounds checking for IRQ numbers
  openpic: use standard bitmap operations
  Revert "openpic: Accelerate pending irq search"
  openpic: always call IRQ_check from IRQ_get_next
  openpic/fsl: critical interrupts ignore mask before v4.1
  openpic: make ctpr signed
  openpic: rework critical interrupt support
  openpic: make register names correspond better with hw docs
  ppc/booke: fix crit/mcheck/debug exceptions
  openpic: lower interrupt when reading the MSI register
  ...
2013-01-12 12:47:02 +00:00
Richard Henderson d2565875ec alpha-linux-user: Fix sigaction
Unconditional bswap replaced by __get_user/__put_user.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-12 12:25:12 +00:00
Samuel Seay 61993a6712 PPC: linux-user: Calculate context pointer explicitly
Peter Maydell recommended the change to be more proper. The result was tested
and shows coming up with the same proper value.

Signed-off-by: Samuel Seay <LightningTH@GMail.com>
[agraf: change subject]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-07 17:37:11 +01:00
Samuel Seay beb526b121 PPC: fix segfault in signal handling code
Removed h2g() macro around the ka->_sa_handler due to the _sa_handler being a
guest memory address.

Changed the __put_user to put_user as it was attempting to put a value at the
stack address but the new address is a guest memory address, __put_user is
for host memory addresses.

Signed-off-by: Samuel Seay <LightningTH@GMail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[agraf: change subject line, reformat commit message]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-07 17:37:09 +01:00
Richard Henderson a05c640915 linux-user: Fix siginfo handling
Compare signal numbers in the proper domain.
Convert all of the fields for SIGIO and SIGCHLD.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 14:01:49 +03:00
Amos Kong 4d5b97da35 cleanup useless return sentence
This patch cleans up return sentences in the end of void functions.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-10-05 15:10:21 +02:00
Blue Swirl 8954bae3ce sparc: fix expression with uninitialized initial value
err was uninitialized, it's not OK to use |=. Spotted by Clang
compiler.

Fix by implementing the earlier statement which initializes the variable.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09 18:34:57 +00:00
Richard W.M. Jones 02d2bd5d57 Replace 'struct siginfo' with 'siginfo_t'.
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.

This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.

This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-01 08:54:07 -05:00
Jia Liu d962783e98 target-or32: Add linux user support
Add QEMU OpenRISC linux user support.

Signed-off-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-27 21:13:05 +00:00
Blue Swirl eeacee4d86 qemu-log: cleanup
Don't use global variables directly but via accessor functions. Rename globals.

Convert macros to functions, add GCC format attributes.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-21 18:45:18 +00:00
Alex Barcelo 32a2003af9 Bad zero comparison for sas_ss_flags on powerpc
All architectures work the same way, and all check for sas_ss_flags ==
0. The powerpc lines are wrong, and do the check the other way round
(it's a qemu internal check, which is done wrong only for this
architecture, it's more a typo than a bug). It's NOT ppc specific,
it's POSIX standard (sigaltstack) and qemu internal.

I have a test source that I will send in a follow-up (it's longer than
I would have wished, I'm sure that a better test case can be written
if needed)

Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15 13:12:10 +01:00
Andreas Färber 9349b4f9fd Rename CPUState -> CPUArchState
Scripted conversion:
  for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
    sed -i "s/CPUState/CPUArchState/g" $file
  done

All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14 22:20:27 +01:00
Andreas Färber 0539024885 linux-user: Don't overuse CPUState
In target-specific code use CPU*State.

While at it, fix indentation on those lines.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14 22:20:24 +01:00
Stefan Weil 93148aa5c3 Spelling fixes in comments (it's -> its)
* it's -> its (fixed for all files)
* dont -> don't (only fixed in a line which was touched by the previous fix)
* distrub -> disturb (fixed in the same line)

Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-08 15:22:11 +00:00
Andreas Färber f78b0f0541 linux-user: Fix sa_flags byte swaps for mips
sa_flags is uint32_t for mips{,n32,64}, so don't use tswapal().

edited by Riku Voipio: likewise on alpha

Reported-by: Khansa Butt <khansa@kics.edu.pk>
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Ehsan Ul Haq <ehsan.ulhaq@kics.edu.pk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-02-02 17:51:21 +02:00
Dong Xu Wang b4916d7b9d fix spelling in linux-user sub directory
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-02 10:50:56 +00:00
Anthony Liguori ff74c5a9a9 Merge remote-tracking branch 'riku/linux-user-for-upstream' into staging 2011-10-31 15:05:40 -05:00
Matthias Braun cbb21eed18 linux-user: fix abi_(u)long, target_ulong mismatch
abi_(u)long might be different from target_ulong, so don't use tswapl
but introduce a new tswapal

Signed-off-by: Matthias Braun <matze@braunis.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2011-10-27 14:42:16 +03:00
Richard Henderson 30038fd818 target-sparc: Change fpr representation to doubles.
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-26 13:55:26 -07:00
Stefan Weil ca8a277ccc linux-user: Remove unused code
The code is unused since 8 years, so remove it.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-05 09:26:23 +01:00
Edgar E. Iglesias cb9c626888 linux-user: Correct a few missuses of host addresses
Fix a few cases where we were passing host pointers to the
guest.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-08-26 07:59:33 +02:00
Peter Maydell 6fea2ea462 linux-user/signal.c: Rename s390 target_ucontext fields to fix ia64
The ia64 sys/ucontext.h defines macros 'uc_link', 'uc_sigmask' and
'uc_stack'. Rename the s390 target_ucontext struct members to tuc_*,
bringing them into line with the other targets and fixing a compile
failure on ia64 hosts caused by this clash.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2011-07-13 17:39:35 +03:00
Peter Maydell c7b016ba04 linux-user/signal.c: Remove unused fenab
Remove fenab as it is only written, never used. Add a FIXME
comment about the discrepancy between our behaviour and that
of the Linux kernel for this routine.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2011-06-21 20:30:10 +03:00
Peter Maydell 2aec3a27d7 linux-user/signal.c: Remove only-ever-set variable fpu_save_addr
Move the access of fpu_save into the commented out skeleton code for
restoring FPU registers on SPARC sigreturn, thus silencing a gcc
4.6 "variable set but never used" warning.
(This doesn't affect the calculation of 'err' because in fact
__get_user() can never fail.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2011-06-21 20:30:10 +03:00
Mike McCormack 9a826d7854 Don't translate pointer when in restore_sigcontext
Fixes crash in i386 when user emulation base address is non-zero.

21797 rt_sigreturn(8,1082124603,1,0,1082126048,1082126248)Exit reason and status: signal 11

Signed-off-by: Mike McCormack <mj.mccormack@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2011-06-20 17:00:18 +03:00
Alexandre Raymond 9bf0960a9a Fix compilation warning due to missing header for sigaction (followup)
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.

Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-08 09:04:29 +01:00
Ulrich Hecht a4c075f178 s390x: s390x-linux-user support
This patch adds support for running s390x binaries in the linux-user emulation
code.

Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-20 17:35:12 +02:00
Stefan Weil 0c58751c37 Fix typo in comment (dieing -> dying)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-08 10:02:17 +01:00
Peter Maydell 005e1a0a02 linux-user/arm: fix compilation failures using softfloat's struct types
Add uses of the float32/float64 boxing and unboxing macros so that
the ARM linux-user targets will compile with USE_SOFTFLOAT_STRUCT_TYPES
enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-10 20:18:36 +01:00
Peter Maydell e321c34aa1 linux-user: avoid gcc array overrun warning for sparc
Suppress a gcc array bounds overrun warning when filling in the SPARC
signal frame by adjusting our definition of the structure so that the
fp and callers_pc membes are part of the ins[] array rather than
separate fields; since qemu has no need to access the fields individually
there is no need to follow the kernel's structure field naming exactly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-01 17:03:02 +00:00
Peter Maydell 964413d9d9 linux-user: ARM: clear the IT bits when invoking a signal handler
When invoking a signal handler for an ARM target, make sure the IT
bits in the CPSR are cleared. (This would otherwise cause incorrect
execution if the IT state was non-zero when an exception occured.
This bug has been masked previously because we weren't getting the
IT state bits at exception entry right anyway.)

Also use the proper cpsr_read()/cpsr_write() interface to update
the CPSR rather than manipulating CPUState fields directly.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14 20:39:19 +01:00
Peter Maydell a59d69da66 ARM: linux-user: Restore iWMMXT state from ucontext on sigreturn
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2010-12-03 15:09:39 +02:00
Peter Maydell 08e11256f6 ARM: linux-user: Expose iWMMXT registers to signal handlers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2010-12-03 15:09:39 +02:00
Peter Maydell 5f9099d9ce ARM: linux-user: Restore VFP state from ucontext on sigreturn
Restore the VFP registers from the ucontext on return from a signal
handler in linux-user mode. This means that signal handlers cannot
accidentally corrupt the interrupted code's VFP state, and allows
them to deliberately modify the state via the ucontext structure.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2010-12-03 15:09:39 +02:00
Peter Maydell 0d871bdbaa ARM: linux-user: Expose VFP registers to signal handlers
For ARM linux-user mode signal handlers, fill in the ucontext with
VFP register contents in the same way that the kernel does. We only
do this for v2 format sigframe (2.6.12 and above); this is actually
bug-for-bug compatible with the older kernels, which don't save and
restore VFP registers either.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2010-12-03 15:09:39 +02:00
Peter Maydell 5f0b7c888b ARM: linux-user: Correct size of padding in target_ucontext_v2
The padding in the target_ucontext_v2 is defined by the size of
the target's sigset_t type, not the host's. (This bug only causes
problems when we start using the uc_regspace[] array to expose
VFP registers to userspace signal handlers.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
2010-12-03 15:09:39 +02:00
Richard Henderson f711df67d6 microblaze: target-ify target_ucontext
Rename the members of target_ucontext so that they don't conflict
with possible host macros for ucontext members.  This has already
been done for the other targets.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-11-23 10:04:30 +01:00
Edgar E. Iglesias b2178704e4 microblaze: Pass a ucontext * as 3rd sighandler arg
There is disagreement between microblaze glibc and the kernel
to what the third arg of signal handlers should point to.

Change QEMU linux-user to match the kernel port. glibc patches
are pending.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-07-23 09:30:37 +02:00
Edgar E. Iglesias 187b4e08d3 microblaze: Correct signal frame setup.
Pass the context in r7.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-15 15:32:51 +02:00
Blue Swirl 5a834bb47c sparc: Fix lazy flag calculation on interrupts, refactor
Recalculate Sparc64 CPU flags on interrupts, otherwise some earlier
flags could be stored to pstate.

Refactor PSR/CCR/CWP handling: concentrate the actual
functions to op_helper.c.

Thanks to Igor Kovalenko for reporting.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-09 20:19:04 +00:00
Aurelien Jarno 60e99246d6 linux-user/ia64: workaround ia64 strangenesses
ia64 has some strangenesses that need to be workaround:
- it has a __clone2() syscall instead of the using clone() one, with
  different arguments, and which is not declared in the usual headers.
- ucontext.uc_sigmask is declared with type long int, while it is
  actually of type sigset_t.
- uc_mcontext, uc_sigmask, uc_stack, uc_link are declared using #define,
  which clashes with the target_ucontext fields. Change their names to
  tuc_*, as already done for some target architectures.
2010-04-01 21:51:58 +02:00
Blue Swirl 43dc2a645e Replace assert(0) with abort() or cpu_abort()
When building with -DNDEBUG, assert(0) will not stop execution
so it must not be used for abnormal termination.

Use cpu_abort() when in CPU context, abort() otherwise.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-18 18:41:57 +00:00
Blue Swirl a6c6f76ceb Fix build with -DNDEBUG in CFLAGS
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-13 14:18:50 +00:00
takasi-y@ops.dti.ne.jp d871443692 linux-user: Save/restore fpu registers to signal context on sh4
As "todo" comment in source code.
And modify restore_sigcontext() to have three args as kernel's does.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-06 19:37:05 +01:00
Richard Henderson 6049f4f831 alpha-linux-user: Implement signals.
Move userland PALcode handling into linux-user main loop so that
we can send signals from there.  This also makes alpha_palcode.c
system-level only, so don't build it for userland.  Add defines
for GENTRAP PALcall mapping to signals.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-28 17:54:52 +01:00
Riku Voipio 66393fb9dd linux-user: cleanup force_sig() calls
Force_sig should be always called with TARGET_ signals.
Not that it really matters with SEGV, so this patch is
just for cleanup and improving consistency.

Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-19 19:45:27 +01:00
Arnaud Patard 3ca055883b linux-user: remove hardcoded value of _NSIG in signal.c
In a bunch of places, 64 is used as value of _NSIG but it's wrong
at least on MIPS were _NSIG is 128.

Based on a patch from Arnaud Patard <arnaud.patard@rtp-net.org>

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-24 19:51:12 +01:00