When configured for interrupts (property "chardev" given), we receive
the shared memory from an ivshmem server. We do so asynchronously
after realize() completes, by setting up callbacks with
qemu_chr_add_handlers().
Keeping server I/O out of realize() that way avoids delays due to a
slow server. This is probably relevant only for hot plug.
However, this funny "no shared memory, yet" state of the device also
causes a raft of issues that are hard or impossible to work around:
* The guest is exposed to this state: when we enter and leave it its
shared memory contents is apruptly replaced, and device register
IVPosition changes.
This is a known issue. We document that guests should not access
the shared memory after device initialization until the IVPosition
register becomes non-negative.
For cold plug, the funny state is unlikely to be visible in
practice, because we normally receive the shared memory long before
the guest gets around to mess with the device.
For hot plug, the timing is tighter, but the relative slowness of
PCI device configuration has a good chance to hide the funny state.
In either case, guests complying with the documented procedure are
safe.
* Migration becomes racy.
If migration completes before the shared memory setup completes on
the source, shared memory contents is silently lost. Fortunately,
migration is rather unlikely to win this race.
If the shared memory's ramblock arrives at the destination before
shared memory setup completes, migration fails.
There is no known way for a management application to wait for
shared memory setup to complete.
All you can do is retry failed migration. You can improve your
chances by leaving more time between running the destination QEMU
and the migrate command.
To mitigate silent memory loss, you need to ensure the server
initializes shared memory exactly the same on source and
destination.
These issues are entirely undocumented so far.
I'd expect the server to be almost always fast enough to hide these
issues. But then rare catastrophic races are in a way the worst kind.
This is way more trouble than I'm willing to take from any device.
Kill the funny state by receiving shared memory synchronously in
realize(). If your hot plug hangs, go kill your ivshmem server.
For easier review, this commit only makes the receive synchronous, it
doesn't add the necessary error propagation. Without that, the funny
state persists. The next commit will do that, and kill it off for
real.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-26-git-send-email-armbru@redhat.com>
Document missing test: behavior with MSI-X present but not enabled.
For MSI-X, we test and clear the interrupt pending bit before testing
the interrupt. For INTx, we only clear. Change to test and clear for
consistency.
Test MSI-X vector 1 in addition to vector 0.
Improve comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-10-git-send-email-armbru@redhat.com>
test_ivshmem_server() waits until the first byte in BAR 2 contains the
0x42 we put into shared memory. Works because the byte reads zero
until the device maps the shared memory gotten from the server.
Check the IVPosition register instead: it's initially -1, and becomes
non-negative right when the device maps the share memory, so no
change, just cleaner, because it's what guest software is supposed to
do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-9-git-send-email-armbru@redhat.com>
Test state of registers after reset.
Test reading Interrupt Status clears it.
Test (invalid) read of Doorbell.
Add more comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-8-git-send-email-armbru@redhat.com>
qpci_pc_iomap() maps BARs one after the other, without padding. This
is wrong. PCI Local Bus Specification Revision 3.0, 6.2.5.1. Address
Maps: "all address spaces used are a power of two in size and are
naturally aligned". That's because the size of a BAR is given by the
number of address bits the device decodes, and the BAR needs to be
mapped at a multiple of that size to ensure the address decoding
works.
Fix qpci_pc_iomap() accordingly. This takes care of a FIXME in
ivshmem-test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-7-git-send-email-armbru@redhat.com>
Event notifiers are designed for eventfd(2). They can fall back to
pipes, but according to Paolo, event_notifier_init_fd() really
requires the real thing, and should therefore be under #ifdef
CONFIG_EVENTFD. Do that.
Its only user is ivshmem, which is currently CONFIG_POSIX. Narrow it
to CONFIG_EVENTFD.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1458066895-20632-6-git-send-email-armbru@redhat.com>
Option -m NAME is interpreted as directory name if we can statfs() it
and its on hugetlbfs. Else it's interpreted as POSIX shared memory
object name. This is nuts.
Always interpret -m as directory. Create new -M for POSIX shared
memory. Last of -m or -M wins.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1458066895-20632-4-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Before this patch, blk_new() automatically assigned a name to the new
BlockBackend and considered it referenced by the monitor. This patch
removes the implicit monitor_add_blk() call from blk_new() (and
consequently the monitor_remove_blk() call from blk_delete(), too) and
thus blk_new() (and related functions) no longer take a BB name
argument.
In fact, there is only a single point where blk_new()/blk_new_open() is
called and the new BB is monitor-owned, and that is in blockdev_init().
Besides thus relieving us from having to invent names for all of the BBs
we use in qemu-img, this fixes a bug where qemu cannot create a new
image if there already is a monitor-owned BB named "image".
If a BB and its BDS tree are created in a single operation, as of this
patch the BDS tree will be created before the BB is given a name
(whereas it was the other way around before). This results in minor
change to the output of iotest 087, whose reference output is amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The information which BB is concerned does not seem useful enough to
justify its existence in most other place (which may be related to qemu
printing the -drive parameter in question anyway, and for blockdev-add
the attribution is naturally unambiguous). Furthermore, as of a future
patch, bdrv_get_device_name(bs) will always return the empty string
before bdrv_open_inherit() returns.
Therefore, just dropping that information seems to be the best course of
action.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just specifying a custom string is simpler in basically all places that
used it, and in addition, specifying the BB or node name is something we
generally do not do in other error messages when opening a BDS, so we
should not do it here.
This changes the output for iotest 036 (to the better, in my opinion),
so the reference output needs to be changed accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since previous pull acpi test triggers warnings,
fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW6H4OAAoJECgfDbjSjVRpsUIH+wVrd2z90IVwT2tFAOv+qtYC
L/kvfccbp7uwR4YlxXnd9Sq+awsJj55qiRfkwbHkDNzOSAnxCUPovPop+HWrx/7w
43V5yjsnQj6TauliGiWzcVrtcTrBRZyVZ8B81kqaNdqJhTzztk4srSX0GTdOfMIz
Dg4VwrawNnXN4ZOi7PbqghCJiQtu0LGUy+AfEG+w4KYQNhBmQcWdbjcsvqdR28K9
7AE1wQnPHiYSQ6vB4ZnywFerH9gwsuDHGwEo9RVFw65QbopzNK8bw3KU3G5soSVT
Pc57cFymCBVnuGVfyv4o0c8lRKJC/DXYQ+IeFFgEBaJYg5vwZpC9Xq5Vp5a68Hc=
=XQSv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi: minor fix
Since previous pull acpi test triggers warnings,
fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Mar 2016 21:26:38 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi-test: update UID for GSI links
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW6B0mAAoJECgfDbjSjVRpCtMH/2xSrYsLGAM3tQZtcAlpoof/
LNjN0GxTMXWtbDfGLKQMkexAmrDtBOqXTNfPpDaeycvktcMJ4wUCqX8nWC+cNwl+
3Uu4yiR9J5qjB4ANRlHnW45aL9rq7Qv0BBMQvc0AxpKMqZ9sf4okd2a4ZprTbhHq
/q/JnWKa/a4CGAZrfwlonobtT/YvF+cbq6gQOxUWMaemptEZDhYaH8PMtw0Ituw1
HWsI5lkhy+bHC2FeoqKt+p3ypuIXfnbg1rJyAiyVzgwz4289aMoh6nBll6WFRGpI
vEligkFv4GBjNlYloUaGLlJxz3RE/7uPGER2lSH0OYTSVNc1zUbvbmv/7DIucSA=
=0EjS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, virtio, pci, pc, acpi
nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (51 commits)
hw/acpi: fix GSI links UID
ipmi: add some local variables in ipmi_sdr_init
ipmi: remove the need of an ending record in the SDR table
ipmi: use a function to initialize the SDR table
ipmi: add a realize function to the device class
ipmi: add rsp_buffer_set_error() helper
ipmi: remove IPMI_CHECK_RESERVATION() macro
ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers
ipmi: remove IPMI_CHECK_CMD_LEN() macro
MAINTAINERS: machine core
MAINTAINERS: Add an entry for virtio header files
pc: acpi: clarify why possible LAPIC entries must be present in MADT
pc: acpi: drop cpu->found_cpus bitmap
pc: acpi: create Processor and Notify objects only for valid lapics
pc: acpi: create MADT.lapic entries only for valid lapics
pc: acpi: SRAT: create only valid processor lapic entries
pc: acpi: cleanup qdev_get_machine() calls
machine: introduce MachineClass.possible_cpu_arch_ids() hook
pc: init pcms->apic_id_limit once and use it throughout pc.c
pc: acpi: remove NOP assignment
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of just checking for bind(), also check whether
getaddrinfo can resolve IPv6 addresses. This catches
failure when travis runs QEMU builds inside minimal
docker containers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This test verifies that the rate-limited QMP events are emitted at a
maximum rate of 1 per second as defined in monitor_qapi_event_conf in
monitor.c
It also checks that QUORUM_REPORT_BAD events generated from different
nodes are kept in separate queues so they don't mask each other.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 0dbd3ee88a59a6363042ad81cfb345037bfbf612.1457610443.git.berto@igalia.com
[mreitz@redhat.com: Renamed test from 146 to 148]
Signed-off-by: Max Reitz <mreitz@redhat.com>
The newly added type parameter for the QUORUM_REPORT_BAD event changed
the output of iotest 081, so the reference should be amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1457705687-27122-1-git-send-email-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
This tests auto-detection, and overrides, of VHD image sizes created
by Virtual PC, Hyper-V, and Disk2vhd.
This adds three sample images:
hyperv2012r2-dynamic.vhd.bz2 - dynamic VHD image created with Hyper-V
virtualpc-dynamic.vhd.bz2 - dynamic VHD image created with Virtual PC
d2v-zerofilled.vhd.bz2 - dynamic VHD image created with Disk2vhd
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit c82f503dd5
("hw/acpi: fix Q35 support for legacy Windows OS")
added _DIS for all link devices.
Update expected test files accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
DSDT was changed by:
commit 27b9fc54d2 ("i386: populate floppy
drive information in DSDT").
Update expected files accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When checking the results of an I/O operation test, assert that
the error objects are NULL before asserting on the content. This
is found to give more useful indication of the problem when
diagnosing test failures.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The reader thread was accidentally setting the error pointer
intended for the writer thread. If both threads set errors
this would result in QEMU abort'ing due to the error already
being set.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Exercise the GSource code for server sockets by calling
qio_channel_wait() prior to accepting the incoming client.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the QIOChannelSocket test we create a socket file
descriptor and then try to create a QIOChannelSocket.
This works on Linux, but fails on Win32 because it is
not valid to call getsockname() on an unbound socket.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The win32 sockets layer requires that socket_init() is called
otherwise nothing will work.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the test-io-channel-socket.c test uses getifaddrs
to see if an IPv4/6 address is present on any host NIC, as
a way to determine if IPv4/6 sockets can be used. This is
problematic because getifaddrs is not available on Win32.
Rather than testing indirectly via getifaddrs, just create
a socket and try to bind() to the loopback address instead.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We started moving away from the use of the 'void *data' member
in the C union corresponding to a QAPI union back in commit
544a373; recent commits have gotten rid of other uses. Now
that it is completely unused, we can remove the member itself
as well as the FIXME comment. Update the testsuite to drop the
negative test union-clash-data.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1457021813-10704-11-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
An upcoming patch will alter how simple unions, like SocketAddress,
are laid out, which will impact all lines of the form 'addr->u.XXX'
(expanding it to the longer 'addr->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
a SocketAddress. Also, take advantage of some C99 initialization where
it makes sense (simplifying g_new0() to g_new()).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
C types and JSON objects don't have fields, but members. We
shouldn't gratuitously invent terminology. This patch is a
strict renaming of generator code internals (including testsuite
comments), before later patches rename C interfaces.
No change to generated code with this patch.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No need to roll our own use of the dealloc visitors when we can
just directly use the qapi_free_FOO() functions that do what we
want in one line.
In net.c, inline net_visit() into its remaining lone caller.
After this patch, test-visitor-serialization.c is the only
non-generated file that needs to use a dealloc visitor, because
it is testing low level aspects of the visitor interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1456262075-3311-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If a backing file isn't specified in the target image and the
cluster_size is larger than the bitmap granularity, we run the risk of
creating bitmaps with allocated clusters but empty/no data which will
prevent the proper reading of the backup in the future.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1456433911-24718-4-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
The "pnum < nb_sectors" condition in deciding whether to actually copy
data is unnecessarily strict, and the qiov initialization is
unnecessarily for bdrv_aio_write_zeroes and bdrv_aio_discard.
Rewrite mirror_iteration to fix both flaws.
The output of iotests 109 is updated because we now report the offset
and len slightly differently in mirroring progress.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1454637630-10585-2-git-send-email-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Magic constants are a pain to use, especially when we run the
risk that our choice of '1' for QGA_SEEK_CUR might differ from
the host or guest's choice of SEEK_CUR. Better is to use an
enum value, via a qapi alternate type for back-compatibility.
With this,
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":"cur"}}
becomes a synonym for the older
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":1}}
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fixes all over the place.
virtio dataplane migration support.
Old q35 machine types removed.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWzuKeAAoJECgfDbjSjVRpGzIH/1Tz6CoEq1rowiyVJ9B80oQU
gDI2YWnJDSwJllmAF0rmoPRBQR8op3ZETZiCAcADHoZ7kdBNWGbyQeaDrrEPH7Q/
rCDVt8Q3g80vs89aWKG0nQ16J2MW5TbkuiQw7pjQSdc9AbUdWpUqSiWnpZ+sPAql
6DuVpjQ4/rN2alucXoa1Sir8KDDV7kBuY8U6/KoY890qzh842dv2523qvuCza9yR
KX8Imj3oQAFjFSv5t1aOD3yYvWFd73EsReHPLGb1JtsVr/6wjs0sFUyA3JicBgnT
+kWoSObWikfDY69HnqTkJpkun6woMM3zW5h2SkUBf9QP3yqLfGIp9uSriNN84Ak=
=KXyh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, virtio, pci, pc
Fixes all over the place.
virtio dataplane migration support.
Old q35 machine types removed.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 25 Feb 2016 11:16:46 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (21 commits)
q35: No need to check gigabyte_align
q35: Remove unused q35-acpi-dsdt.aml file
ich9: Remove enable_tco arguments from init functions
machine: Remove no_tco field
q35: Remove old machine versions
tests/vhost-user-bridge: fix build on 32 bit systems
vring: remove
virtio-scsi: do not use vring in dataplane
virtio-blk: do not use vring in dataplane
virtio-blk: fix "disabled data plane" mode
virtio: export vring_notify as virtio_should_notify
virtio: add AioContext-specific function for host notifiers
vring: make vring_enable_notification return void
block-migration: acquire AioContext as necessary
pci core: function pci_bus_init() cleanup
pci core: function pci_host_bus_register() cleanup
balloon: Use only 'pc-dimm' type dimm for ballooning
virtio-balloon: rewrite get_current_ram_size()
move get_current_ram_size to virtio-balloon.c
vhost-user: don't merge regions with different fds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
This just catches a couple of stragglers since I posted
the last clean-includes patchset last week.
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Describe in a little more detail what the test is supposed to achieve.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-3-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
IDE is only implemented by very few architectures (mostly PC). The
test doesn't actually need a block device attached to the
BlockBackend, so just drop it and adjust the reference output
accordingly.
Fixes: 16dee418 ("iotests: Add test for eject under NBD server")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-2-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The relative ordering of "device_del" return value and the
"DEVICE_DELETED" QMP event depends on the architecture being
tested. On x86 unplugging virtio disks is asynchronous
(=qdev_unplug()= → =hotplug_handler_unplug_request()=) while on s390x
it is synchronous (=qdev_unplug()= → =hotplug_handler_unplug()=). This
leads to the actual output on s390x consistently differing from the
reference output (that was probably produced on x86).
The easiest way to address this is to filter out QMP events in
067. The DEVICE_DELETED event is already getting explicitly tested by
the Python-based test case 139, so the test coverage should be
unaffected. Make use of the recently introduced _filter_qmp_events()
to remove QMP events from the test case output and adjust the
reference output accordingly.
The tr / sed / tr trick used for filtering was suggested by Max Reitz
<mreitz@redhat.com>.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455886869-139916-2-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a new test that checks that the burst settings
('iops_max', 'iops_max_length', etc.) of the throttling code work as
expected.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test simulates an I/O burst for more than two seconds and checks
that it works as expected.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch expands test_leak_bucket() to check that burst_level leaks
correctly.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can currently initialize ThrottleConfig by zeroing all its fields,
but this will change with the new fields to define the length of the
burst periods.
This patch introduces a new throttle_config_init() function and uses it
to replace all memset() calls that initialize ThrottleConfig directly.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There's no need to keep throttle_conflicting(), throttle_is_valid()
and throttle_max_is_missing_limit() as separate functions, so this
patch merges all three into one.
As a consequence, check_throttle_config() becomes redundant and can be
replaced with throttle_is_valid().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When testing the ranges of valid values, set_cfg_value() creates
sometimes invalid throttling configurations by setting bucket.max
while leaving bucket.avg uninitialized.
While this doesn't break the current tests, it will as soon as
we unify all functions that check the validity of the throttling
configuration.
This patch ensures that the value of bucket.avg is valid when setting
bucket.max.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The caller does not need to set it, and this will allow us to refactor
this function later.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Markus Armbruster
Alberto Garcia
Max Reitz
Peter Maydell
Michael S. Tsirkin
Daniel P. Berrange
Jeff Cody
Gerd Hoffmann
Eric Blake
John Snow
Fam Zheng
Sascha Silbe