Signed-off-by: Hsiangkai Wang <kai.wang@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-69-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Shortly, the set of supported XL will not be just 32 and 64,
and representing that properly using the enumeration will be
imperative.
Two places, booting and gdb, intentionally use misa_mxl_max
to emphasize the use of the reset value of misa.mxl, and not
the current cpu state.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The hw representation of misa.mxl is at the high bits of the
misa csr. Representing this in the same way inside QEMU
results in overly complex code trying to check that field.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-4-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since commit 605def6eee ("target/riscv: Use the RISCVException enum for CSR operations")
the CSR predicate() function was changed to return RISCV_EXCP_NONE
instead of 0 for a valid CSR, but it forgot to update the dynamic
CSR XML generation codes in gdbstub.
Fixes: 605def6eee ("target/riscv: Use the RISCVException enum for CSR operations")
Reported-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210615085133.389887-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present QEMU RISC-V uses a hardcoded XML to report the feature
"org.gnu.gdb.riscv.csr" [1]. There are two major issues with the
approach being used currently:
- The XML does not specify the "regnum" field of a CSR entry, hence
consecutive numbers are used by the remote GDB client to access
CSRs. In QEMU we have to maintain a map table to convert the GDB
number to the hardware number which is error prone.
- The XML contains some CSRs that QEMU does not implement at all,
which causes an "E14" response sent to remote GDB client.
Change to generate the CSR register list dynamically, based on the
availability presented in the CSR function table. This new approach
will reflect a correct list of CSRs that QEMU actually implements.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/RISC_002dV-Features.html#RISC_002dV-Features
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210116054123.5457-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Instead of passing a pointer to memory now just extend the GByteArray
to all the read register helpers. They can then safely append their
data through the normal way. We don't bother with this abstraction for
write registers as we have already ensured the buffer being copied
from is the correct size.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316172155.971-15-alex.bennee@linaro.org>
Add the Hypervisor CSRs to CPUState and at the same time (to avoid
bisect issues) update the CSR macros for the v0.5 Hyp spec.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The size of the FPU registers is dictated by the 'f' and 'd' features,
not the core processor register size. Processors with the 'd' feature
have 64-bit FPU registers. Processors without the 'd' feature but with
the 'f' feature have 32-bit FPU registers.
Signed-off-by: Keith Packard <keithp@keithp.com>
[Palmer: This requires manually triggering a rebuild of
riscv32-softmmu/gdbstub-xml.c]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently only PRV_U, PRV_S and PRV_M are supported, so this patch ensures that
the privilege mode is set to one of them. Once support for the H-extension is
added, this code will also need to properly update the virtualization status
when switching between VU/VS-modes and M-mode.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch enables a debugger to read the current privilege level via a virtual
"priv" register. When compiled with CONFIG_USER_ONLY the register is still
visible but always reports the value zero.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
If the number of registers reported to the gdbstub code does not match the
number in the associated XML file, then the register numbers used by the stub
may get out of sync with a remote GDB instance.
Signed-off-by: Jonathan Behrens <jonathan@fintelia.io>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
While debugging an application with GDB the following might happen:
(gdb) return
Make xxx return now? (y or n) y
Could not fetch register "fflags"; remote failure reply 'E14'
This is because riscv_gdb_get_fpu calls riscv_csrrw_debug with a wrong csr
number (8). It should use the csr_register_map in order to reach the
riscv_cpu_get_fflags callback.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
The gdb CSR xml file has registers in documentation order, not numerical
order, so we need a table to map the register numbers. This also adds
fairly standard gdb hooks to access xml specified registers.
notice:
The fpu xml from gdb 8.3 has unused register #, 65 and make first
csr register # become 69. We register extra register on gdb to correct
csr offset calculation
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Previous CSR code uses csr_read_helper and csr_write_helper
to update CSR registers however this interface prevents
atomic read/modify/write CSR operations; in addition
there is no trap-free method to access to CSRs due
to the monolithic CSR functions call longjmp.
The current iCSR interface is not safe to be called by
target/riscv/gdbstub.c as privilege checks or missing CSRs
may call longjmp to generate exceptions. It needs to
indicate existence so traps can be generated in the
CSR instruction helpers.
This commit moves CSR access from the monolithic switch
statements in target/riscv/op_helper.c into modular
read/write functions in target/riscv/csr.c using a new
function pointer table for dispatch (which can later
be used to allow CPUs to hook up model specific CSRs).
A read/modify/write interface is added to support atomic
CSR operations and a non-trapping interface is added
to allow exception-free access to CSRs by the debugger.
The CSR functions and CSR dispatch table are ordered
to match The RISC-V Instruction Set Manual, Volume II:
Privileged Architecture Version 1.10, 2.2 CSR Listing.
An API is added to allow derived cpu instances to modify
or implement new CSR operations.
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
GDB Register read and write routines.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Hsiangkai Wang
Richard Henderson
Bin Meng
Alistair Francis
Alex Bennée
Keith Packard
Jonathan Behrens
KONRAD Frederic
Markus Armbruster
Jim Wilson
Michael Clark