Commit Graph

207 Commits

Author SHA1 Message Date
Michael Tokarev 74e91370be savevm.c: cleanup system includes
savevm.c suffers from the same problem as some other files.
Some years ago savevm.c was created from vl.c, moving some
code from there into a separate file.  At that time, all
includes were just copied from vl.c to savevm.c, without
checking which ones are needed and which are not.

But actually most of that stuff is _not_ needed.  More, some
stuff is wrong, for example, *BSD #ifdef'ery around <util.h>
vs <libutil.h> - for one, it fails to build on Debian/kFreebsd.

Just remove all this.  Maybe there's a possibility to clean
it up further - like removing <windows.h> (and maybe including
winsock.h for htons etc), and maybe it's possible to remove
some internal #includes too, but I didn't check this.

While at it, remove duplicate #include of qemu/timer.h.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02 13:32:48 -06:00
Juan Quintela e4ed1541ac savevm: New save live migration method: pending
Code just now does (simplified for clarity)

    if (qemu_savevm_state_iterate(s->file) == 1) {
       vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
       qemu_savevm_state_complete(s->file);
    }

Problem here is that qemu_savevm_state_iterate() returns 1 when it
knows that remaining memory to sent takes less than max downtime.

But this means that we could end spending 2x max_downtime, one
downtime in qemu_savevm_iterate, and the other in
qemu_savevm_state_complete.

Changed code to:

    pending_size = qemu_savevm_state_pending(s->file, max_size);
    DPRINTF("pending size %lu max %lu\n", pending_size, max_size);
    if (pending_size >= max_size) {
        ret = qemu_savevm_state_iterate(s->file);
     } else {
        vm_stop_force_state(RUN_STATE_FINISH_MIGRATE);
        qemu_savevm_state_complete(s->file);
     }

So what we do is: at current network speed, we calculate the maximum
number of bytes we can sent: max_size.

Then we ask every save_live section how much they have pending.  If
they are less than max_size, we move to complete phase, otherwise we
do an iterate one.

This makes things much simpler, because now individual sections don't
have to caluclate the bandwidth (it was implossible to do right from
there).

Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-20 23:09:25 +01:00
Juan Quintela dd217b8732 migration: make writes blocking
Move all the writes to the migration_thread, and make writings
blocking.  Notice that are still using the iothread for everything
that we do.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20 23:09:25 +01:00
Paolo Bonzini 9c17d615a6 softmmu: move include files to include/sysemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:45 +01:00
Paolo Bonzini 1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Paolo Bonzini caf71f86a3 migration: move include files to include/migration/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:32 +01:00
Paolo Bonzini 83c9089e73 monitor: move include files to include/monitor/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:32 +01:00
Paolo Bonzini 022c62cbbc exec: move include files to include/exec/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:31 +01:00
Paolo Bonzini 1422e32db5 net: reorganize headers
Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed.  Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:29 +01:00
Paolo Bonzini f8fe796407 janitor: do not include qemu-char everywhere
Touching char/char.h basically causes the whole of QEMU to
be rebuilt.  Avoid this, it is usually unnecessary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:59 +01:00
Paolo Bonzini 595ab64169 migration: handle EAGAIN while reading QEMUFile
This will never happen right now (the assertion would fail).  The
next patch will set the socket or pipe in non-blocking mode, thus
enabling this part of the code.

Coroutines can just stop whenever they want with qemu_coroutine_yield.
As soon as select tells the main loop that the migration stream is
readable, the coroutine is re-entered directly in qemu_get_buffer,
where it will read more data and pass it to the loading routines.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02 18:35:07 +01:00
Paolo Bonzini ab52a824a4 migration: close socket QEMUFile from socket_close
The common suffix now is process_incoming_migration+qemu_fclose.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02 18:35:07 +01:00
Paolo Bonzini d263a20bcf migration: replace qemu_stdio_fd with qemu_get_fd
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02 18:35:06 +01:00
Paolo Bonzini 70eb633034 migration: add qemu_get_fd
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02 18:34:59 +01:00
Paolo Bonzini 9229bf3c2d migration: consolidate QEMUFile methods in a single QEMUFileOps struct
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02 18:34:59 +01:00
Paolo Bonzini 5f0ebf1b4d migration: unify stdio-based QEMUFile operations
Now that qemu_fseek does not exist anymore, there is no reason to do
an fseek before fread/fwrite when operating on an stdio file.
Thus, unify the get/put_buffer callbacks used by qemu_fopen
with those used for pipes.

Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02 18:34:59 +01:00
Peter Maydell 08e99e296f vmstate: Add support for saving/loading bitmaps
Add support for saving/loading bitmap.h bitmaps in vmstate.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
2012-10-30 07:45:12 +00:00
Juan Quintela a2b4135124 savevm: make qemu_file_put_notify() return errors
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:35:00 +02:00
Juan Quintela 6f121ff575 savevm: un-export qemu_file_set_error()
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:34:59 +02:00
Juan Quintela c10682cb03 savevm: Only qemu_fflush() can generate errors
Move the error check to the beggining of the callers.  Once this is fixed
qemu_file_set_if_error() is not used anymore, so remove it.

Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:34:59 +02:00
Juan Quintela 02c4a0511b savevm: make qemu_fill_buffer() be consistent
It was setting last_error directly once, and with the helper the other time.

Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:34:59 +02:00
Juan Quintela 3aee4be1de savevm: unexport qemu_ftell()
It was unused out of savevm.c.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-10-17 18:34:59 +02:00
Juan Quintela 29eee86f31 savevm: unfold qemu_fclose_internal()
It was used only one, and was only one if.  It makes error handling
saner.

Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:34:59 +02:00
Juan Quintela 7311bea33f savevm: make qemu_fflush() return an error code
Adjust all the callers.  We moved the set of last_error from inside
qemu_fflush() to all the callers.

Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:34:59 +02:00
Juan Quintela e5ae97cee4 savevm: Remove qemu_fseek()
It has no users, and is only half implemented.

Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:34:59 +02:00
Juan Quintela ffbfc74d1e savevm: unexport qemu_fflush
It is not used outside of savevm.c

Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-17 18:34:59 +02:00
Amos Kong 4d5b97da35 cleanup useless return sentence
This patch cleans up return sentences in the end of void functions.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-10-05 15:10:21 +02:00
Anthony Liguori 0d16fdd732 Merge remote-tracking branch 'agraf/ppc-for-upstream' into staging
* agraf/ppc-for-upstream: (24 commits)
  openpic: Added BRR1 register
  pseries: Update SLOF firmware image
  pseries dma: DMA window params added to PHB and DT population changed
  pseries: Add PCI MSI/MSI-X support
  pseries: Add trace event for PCI irqs
  pseries: Export find_phb() utility function for PCI code
  pseries: added allocator for a block of IRQs
  pseries: Separate PCI RTAS setup from common from emulation specific PCI setup
  pseries: Rework irq assignment to avoid carrying qemu_irqs around
  pseries: Remove extraneous prints
  pseries: Update SLOF
  PPC: spapr: Remove global variable
  PPC: spapr: Rework VGA select logic
  xbzrle: fix compilation on ppc32
  spapr: Add support for -vga option
  Add one new file vga-pci.h and cleanup on all platforms
  Revert "PPC: e500: Use new MPIC dt format"
  ppc: Fix bug in handling of PAPR hypercall exits
  PPC: e500: add generic e500 platform
  PPC: e500: split mpc8544ds machine from generic e500 code
  ...
2012-08-15 14:59:21 -05:00
Alexander Graf a5b71725c7 xbzrle: fix compilation on ppc32
When compiling the xbzrle code on my ppc32 user space, I hit the following
gcc compiler warning (treated as an error):

  cc1: warnings being treated as errors
  savevm.c: In function ‘xbzrle_encode_buffer’:
  savevm.c:2476: error: overflow in implicit constant conversion

Fix this by making the cast explicit, rather than implicit.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15 19:43:15 +02:00
Corey Bryant 2e1e79dae7 block: Convert close calls to qemu_close
This patch converts all block layer close calls, that correspond
to qemu_open calls, to qemu_close.

Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-15 10:48:57 +02:00
Orit Wasserman 302dfbeb21 Add xbzrle_encode_buffer and xbzrle_decode_buffer functions
For performance we are encoding long word at a time.
For nzrun we use long-word-at-a-time NULL-detection tricks from strcmp():
using ((lword - 0x0101010101010101) & (~lword) & 0x8080808080808080) test
to find out if any byte in the long word is zero.

Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08 13:51:12 +02:00
Juan Quintela 16310a3cca savevm: split save_live into stage2 and stage3
We split it into 2 functions, foo_live_iterate, and foo_live_complete.
At this point, we only remove the bits that are for the other stage,
functionally this is equivalent to previous code.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela d1315aac6e savevm: split save_live_setup from save_live_state
This patch splits stage 1 to its own function for both save_live
users, ram and block.  It is just a copy of the function, removing the
parts of the other stages.  Optimizations would came later.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela 6bd6878133 savevm: introduce is_active method
Enable the creation of a method to tell migration if that section is
active and should be migrate.  We use it for blk-migration, that is
normally not active.  We don't create the method for RAM, as setups
without RAM are very strange O:-)

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela 9b5bfab05f savevm: Refactor cancel operation in its own operation
Intead of abusing stage with value -1.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela 7908c78d3e savevm: Live migration handlers register the struct directly
Notice that the live migration users never unregister, so no problem
about freeing the ops structure.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela 22ea40f4ff savevm: Use a struct to pass all handlers
This would make easier to add more operations in the next patches.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-07-20 08:19:27 +02:00
Juan Quintela aac844ed97 No need to iterate if we already are over the limit
If buffers are full, don't iterate, just exit.

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-06-29 13:27:28 +02:00
Juan Quintela 517a13c91a Add tracepoints for savevm section start/end
This allows to know how long each section takes to save.

An awk script like this tells us sections that takes more that 10ms

$1 ~ /savevm_state_iterate_end/ {
	/* Print savevm_section_end line when > 10ms duration */
	if ($2 > 10000) {
		printf("%s times_missing=%u\n", $0, times_missing++);
	}
}

Signed-off-by: Juan Quintela <quintela@redhat.com>

fix ws tracepoints

Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-06-29 13:27:28 +02:00
Isaku Yamahata 6607ae235b Add MigrationParams structure
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2012-06-29 13:18:21 +02:00
Anthony Liguori 8aca521512 Merge remote-tracking branch 'afaerber-or/qom-next-2' into staging
* afaerber-or/qom-next-2: (22 commits)
  qom: Push error reporting to object_property_find()
  qdev: Remove qdev_prop_exists()
  qbus: Initialize in standard way
  qbus: Make child devices links
  qdev: Connect busses with their parent devices
  qdev: Convert busses to QEMU Object Model
  qdev: Move SysBus initialization to sysbus.c
  qdev: Use wrapper for qdev_get_path
  qdev: Remove qdev_prop_set_defaults
  qdev: Clean up global properties
  qdev: Move bus properties to abstract superclasses
  qdev: Move bus properties to a separate global
  qdev: Push "type" property up to Object
  arm_l2x0: Rename "type" property to "cache-type"
  m48t59: Rename "type" property to "model"
  qom: Assert that public types have a non-NULL parent field
  qom: Drop type_register_static_alias() macro
  qom: Make Object a type
  qom: Add class_base_init
  qom: Add object_child_foreach()
  ...
2012-06-18 10:35:16 -05:00
Anthony Liguori 09e5ab6360 qdev: Use wrapper for qdev_get_path
This makes it easier to remove it from BusInfo.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18 15:14:38 +02:00
Paolo Bonzini ad492c9244 savevm: flush after saving vm state
Writing vm state uses bdrv_pwrite, so it will automatically get flushes
in writethrough mode.  But doing a flush at the end in writeback mode
is probably a good idea anyway.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:43 +02:00
Stefan Weil 55dd9ffa70 w64: Fix time conversion for some versions of MinGW-w64
tb.time is a time value, but not necessarily of the same size as time_t:
while time_t is 64 bit for w64, tb.time still is 32 bit only.

Therefore we need en explicit conversion.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-04-15 21:25:18 +02:00
Anthony Liguori 33cf629a37 Merge remote-tracking branch 'sstabellini/saverestore-8' into staging
* sstabellini/saverestore-8:
  xen: do not allocate RAM during INMIGRATE runstate
  xen mapcache: check if memory region has moved.
  xen: record physmap changes to xenstore
  Set runstate to INMIGRATE earlier
  Introduce "xen-save-devices-state"
  cirrus_vga: do not reset videoram

Conflicts:
	qapi-schema.json

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-19 13:39:42 -05:00
Stefano Stabellini a7ae8355b4 Introduce "xen-save-devices-state"
- add an "is_ram" flag to SaveStateEntry;

- register_savevm_live sets is_ram for live_savevm devices;

- introduce a "xen-save-devices-state" QAPI command that can be used to save
the state of all devices, but not the RAM or the block devices of the
VM.

Changes in v8:

- rename save-devices-state to xen-save-devices-state.

Changes in v7:

- rename save_devices to save-devices-state.

Changes in v6:

- remove the is_ram parameter from register_savevm_live and sets is_ram
if the device is a live_savevm device;

- introduce save_devices as a QAPI command, write a better description
for it;

- fix CODING_STYLE;

- introduce a new doc to explain the save format used by save_devices.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-19 18:21:00 +00:00
Anthony Liguori b8b3e75609 Merge remote-tracking branch 'qemu-kvm/memory/urgent' into staging
* qemu-kvm/memory/urgent: (42 commits)
  memory: check for watchpoints when getting code ram_addr
  exec: fix write tlb entry misused as iotlb
  Sparc: avoid AREG0 wrappers for memory access helpers
  Sparc: avoid AREG0 for memory access helpers
  TCG: add 5 arg helpers to def-helper.h
  softmmu templates: optionally pass CPUState to memory access functions
  i386: Remove REGPARM
  sparc64: implement PCI and ISA irqs
  sparc: reset CPU state on reset
  apb: use normal PCI device header for PBM device
  w64: Fix data type of next_tb and tcg_qemu_tb_exec
  softfloat: fix for C99
  vmstate: fix varrays with uint32_t indexes
  Fix large memory chunks allocation with tcg_malloc.
  hw/pxa2xx.c: Fix handling of pxa2xx_i2c variable offset within region
  hw/pxa2xx_lcd.c: drop target_phys_addr_t usage in device state
  hw/pxa2xx_dma.c: drop target_phys_addr_t usage in device state
  ARM: Remove unnecessary subpage workarounds
  malta: Fix display for LED array
  malta: Use symbolic hardware addresses
  ...
2012-03-19 08:51:50 -05:00
Amos Kong 1329d1896c vmstate: fix varrays with uint32_t indexes
VMSTATE_VARRAY_UINT32() is used in hw/ds1225y.c, and we checked
VMS_VARRAY_UINT32 bit of field->flags in vmstate_load_state(),
but we don't check this bit in vmstate_save_state().

Signed-off-by: Amos Kong <akong@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-17 12:58:51 +00:00
Luiz Capitulino e1c37d0e94 qapi: Convert migrate
The migrate command is one of those commands where HMP and QMP completely
mix up together. This made the conversion to the QAPI (which separates the
command into QMP and HMP parts) a bit difficult.

The first important change to be noticed is that this commit completes the
removal of the Monitor object from migration code, started by the previous
commit.

Another important and tricky change is about supporting the non-detached
mode. That is, if the user doesn't pass '-d' the migrate command will lock
the monitor and will only release it when migration is finished.

To support this in the new HMP command (hmp_migrate()), it is necessary
to create a timer which runs every second and checks if the migration is
still active. If it is, the timer callback will re-schedule itself to run
one second in the future. If the migration has already finished, the
monitor lock is released and the user can use it normally.

All these changes should be transparent to the user.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-15 10:39:52 -03:00
Luiz Capitulino 539de1246d Purge migration of (almost) everything to do with monitors
The Monitor object is passed back and forth within the migration/savevm
code so that it can print errors and progress to the user.

However, that approach assumes a HMP monitor, being completely invalid
in QMP.

This commit drops almost every single usage of the Monitor object, all
monitor_printf() calls have been converted into DPRINTF() ones.

There are a few remaining Monitor objects, those are going to be dropped
by the next commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-15 10:39:52 -03:00