The if_fastq and if_batchq contain not only packets, but queues of packets
for the same socket. When sofree frees a socket, it thus has to clear ifq_so
from all the packets from the queues, not only the first.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sosendoob() can return a failure code, but all its callers ignore it.
This is OK in sbappend(), as the comment there states -- we will try
again later in sowrite(). Add a (void) cast to tell Coverity so.
In sowrite() we do need to check the return value -- we should handle
a write failure in sosendoob() the same way we handle a write failure
for the normal data.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The code in sosendoob() assumes that slirp_send() always
succeeds, but it might return an OS error code (for instance
if the other end has disconnected). Catch these and return
the caller either -1 on error or the number of urgent bytes
actually written. (None of the callers check this return
value currently, though.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Spotted by ASAN:
/x86_64/hmp/pc-0.12:
=================================================================
==22538==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 224 byte(s) in 1 object(s) allocated from:
#0 0x7f0f63cdee60 in malloc (/lib64/libasan.so.3+0xc6e60)
#1 0x556f11ff32d7 in tcp_newtcpcb /home/elmarco/src/qemu/slirp/tcp_subr.c:250
#2 0x556f11fdb1d1 in tcp_listen /home/elmarco/src/qemu/slirp/socket.c:688
#3 0x556f11fca9d5 in slirp_add_hostfwd /home/elmarco/src/qemu/slirp/slirp.c:1052
#4 0x556f11f8db41 in slirp_hostfwd /home/elmarco/src/qemu/net/slirp.c:506
#5 0x556f11f8dd83 in hmp_hostfwd_add /home/elmarco/src/qemu/net/slirp.c:535
There might be a better way to fix this, but calling slirp tcp_close()
doesn't work.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Coverity points out (CID 1005725) that an error-exit path in tcp_listen()
will try to close(s) even if the reason it got there was that the
qemu_socket() failed and s was never opened. Not only that, this isn't even
the right function to use, because we need closesocket() to do the right
thing on Windows. Change to using the right function and only calling it if
needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
if_start() goes through the slirp->if_fastq and slirp->if_batchq
list of pending messages, and accesses ifm->ifq_so->so_nqueued of its
elements if ifm->ifq_so != NULL. When freeing a socket, we thus need
to make sure that any pending message for this socket does not refer
to the socket any more.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Brian Candler <b.candler@pobox.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
They look like fe80::%eth0
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
Changes since last submission:
- fix windows build
This makes get_dns_addr address family-agnostic, thus allowing to add the
IPv6 case.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
On Darwin, connect, sendto and friends want the exact size of the sockaddr,
not more (and in particular, not sizeof(struct sockaddr_storaget))
This commit adds the sockaddr_size helper to be used when passing a sockaddr
size to such function, and makes use of it int sendto and connect calls.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
slirp currently only handles ECONNREFUSED in the case where connect()
returns immediately with that error; since we use non-blocking sockets,
most of the time we won't receive the error until we later try to read
from the socket. Ensure that we deliver the appropriate RST to the
guest in this case.
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When the host aborts (RST) its side of a TCP connection we need to
propagate that RST to the guest. The current code can leave such guest
connections dangling forever. Spotted by Jason Wessel.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[steven@steven676.net: coding style adjustments]
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Samuel Thibault pointed out that it's possible that slirp_pollfds_poll()
will try to use a socket even after soread() returns an error, resulting
in an use-after-free if the socket was removed while handling the error.
Avoid this by refusing to continue to work with the socket in this case.
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This patch adds an IPv6 address to the DNS relay. in6_equal_dns() is
developed using this Slirp attribute.
sotranslate_in/out/accept() are also updated to manage the IPv6 case so the
guest can be able to join the host using one of the Slirp addresses.
For now this only points to localhost. Further development will be needed to
automatically fetch the IPv6 address from resolv.conf, and announce this via
RDNSS.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch factorizes the tcpiphdr structure to put the IPv4 fields in
an union, for addition of version 6 in further patch.
Using some macros, retrocompatibility of the existing code is assured.
This patch also fixes the SLIRP_MSIZE and margin computation in various
functions, and makes them compatible with the new tcpiphdr structure,
whose size will be bigger than sizeof(struct tcphdr) + sizeof(struct ip)
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This adds the sin6 case in the fhost and lhost unions and related macros.
It adds udp6_input() and udp6_output().
It adds the IPv6 case in sorecvfrom().
Finally, udp_input() is called by ip6_input().
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Disambiguation : icmp_error is renamed into icmp_send_error, since it
doesn't manage errors, but only sends ICMP Error messages.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-10-git-send-email-peter.maydell@linaro.org
This patch makes solookup() compatible with varying address
families, by using a new sockaddr_equal() function that compares
two sockaddr_storage.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
solookup() was only compatible with TCP. Having the socket list in
argument, it is now compatible with UDP too.
Some optimization code is factorized inside the function (the function
look at the last returned result before browsing the complete socket
list).
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch factorizes some duplicate code into a new function,
sotranslate_out(). This function perform the address translation when a
packet is transmitted to the host network. If the packet is destinated
to the host, the loopback address is used, and if the packet is
destinated to the virtual DNS, the real DNS address is used. This code
is just a copy of the existent, but factorized and ready to manage the
IPv6 case.
On the same model, the major part of udp_output() code is moved into a
new sotranslate_in(). This function is directly used in sorecvfrom(),
like sotranslate_out() in sosendto().
udp_output() becoming useless, it is removed and udp_output2() is
renamed into udp_output(). This adds consistency with the udp6_output()
function introduced by further patches.
Lastly, this factorizes some duplicate code into sotranslate_accept(), which
performs the address translation when a connection is established on the host
for port forwarding: if it comes from localhost, the host virtual address is
used instead.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch replaces foreign and local address/port couples in Socket
structure by 2 sockaddr_storage which can be casted in sockaddr_in.
Direct access to address and port is still possible thanks to some
\#define, so retrocompatibility of the existing code is assured.
The ss_family field of sockaddr_storage is declared after each socket
creation.
The whole structure is also saved/restored when a Qemu session is
saved/restored.
This prepares for IPv6 support.
Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Casting pointers to long won't work on 64 bit Windows.
It is not needed with the right format strings.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
port redirection code uses SO_REUSEADDR socket option before binding to
host port. Behavior of SO_REUSEADDR is different on Windows and Linux.
Relaunching QEMU with same host and guest port redirection values on Linux
throws error but on Windows it does not throw any error.
Problem is discussed in http://lists.gnu.org/archive/html/qemu-devel/2013-04/msg03089.html
Signed-off-by: Taimoor Mirza <tmirza@codesourcery.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Instead of adding missing type casts which are needed by MinGW for the
4th argument, the patch uses qemu_setsockopt which was invented for this
purpose.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Otherwise we may start processing sockets in slirp_pollfds_poll that
were created past slirp_pollfds_fill.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Slirp uses rfds/wfds/xfds more extensively than other QEMU components.
The rarely-used out-of-band TCP data feature is used. That means we
need the full table of select(2) to g_poll(3) events:
rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR
wfds -> G_IO_OUT | G_IO_ERR
xfds -> G_IO_PRI
I came up with this table by looking at Linux fs/select.c which maps
select(2) to poll(2) internally.
Another detail to watch out for are the global variables that reference
rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and
sofcantsendmore() use these globals to clear fd_set bits. When
sofcantrcvmore() is called, the wfds bit is cleared so that the write
handler will no longer be run for this iteration of the event loop.
This actually seems buggy to me since TCP connections can be half-closed
and we'd still want to handle data in half-duplex fashion. I think the
real intention is to avoid running the read/write handler when the
socket has been fully closed. This is indicated with the SS_NOFDREF
state bit so we now check for it before invoking the TCP write handler.
Note that UDP/ICMP code paths don't care because they are
connectionless.
Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces.
I followed the style of the surrounding code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this
feature to forward guest pings to the outer world. The host admin has to
set the ping_group_range in order to grant access to those sockets. To
allow ping for the users group (GID 100):
echo 100 100 > /proc/sys/net/ipv4/ping_group_range
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no need to have a second set of integral types.
Replace them by the standard types from stdint.h.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
A data structure of type sockaddr_in is allocated from stack but not
properly initialized. This may lead to a failure in the bind() call
later on. Fixed by filling the contents of the structure with zeroes
before using it.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file
descriptors that don't need to be passed to children to stop this misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently the qemu user-mode networking stack reads the host DNS
configuration (/etc/resolv.conf or the Windows equivalent) only once
when qemu starts. This causes name lookups in the guest to fail if the
host is moved to a different network from which the original DNS servers
are unreachable, a common occurrence when the host is a laptop.
This patch changes the slirp code to read the host DNS configuration on
demand, caching the results for at most 1 second to avoid unnecessary
overhead if name lookups occur in rapid succession. On non-Windows
hosts, /etc/resolv.conf is re-read only if the file has been replaced or
if its size or mtime has changed.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The essence of this patch is to stuff (almost) all global variables of
the slirp stack into the structure Slirp. In this step, we still keep
the structure as global variable, directly accessible by the whole
stack. Changes to the external interface of slirp will be applied in
the following patches.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
After all its years inside the qemu tree, there is no point in keeping
the dead code paths of slirp. This patch is a first round of removing
usually commented out code parts. More cleanups need to follow (and
maybe finally a proper reindention).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This prepares for adding flags to socket.so_state that must not be
removed during the lifetime of a socket.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Extend the hostfwd rule format so that the user can specify on which
host interface qemu should listen for incoming connections. If omitted,
binding will takes place against all interfaces.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The user mode IP stack is currently only minimally configurable /wrt to
its virtual IP addresses. This is unfortunate if some guest has a fixed
idea of which IP addresses to use.
Therefore this patch prepares the stack for fully configurable IP
addresses and masks. The user interface and default addresses remain
untouched in this step, they will be enhanced in the following patch.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Work around buffer and ioctlsocket argument type signedness problems
Suppress a prototype which is unused on mingw32
Expand a macro to avoid warnings from some GCC versions
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Vectored IO APIs will require some sort of vector argument. It makes sense to
use struct iovec and just define it globally for Windows.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5889 c046a42c-6fe2-441c-8c8c-71466251a162
Samuel Thibault
Peter Maydell
Marc-André Lureau
Markus Armbruster
Stefan Weil
Steven Luo
Edgar E. Iglesias
Guillaume Subiron
Yann Bordenave
Sebastian Ottlik
Taimoor Mirza
Jan Kiszka
Stefan Hajnoczi
Blue Swirl
Stefan Weil
Juha Riihimäki
Kevin Wolf
Ed Swierk
Jan Kiszka
blueswir1
aliguori