Commit Graph

129 Commits

Author SHA1 Message Date
Markus Armbruster 54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster 650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Marc-André Lureau 4c77ee12da spice: use a default name for the server
If no -name is given, let's use a friendly "QEMU version" server
name. This is sometime exposed on spice client side, for example on
remote-viewer title.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-11-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21 14:09:17 +01:00
Marc-André Lureau 5b1638bc49 spice: do not stop spice if VM is paused
spice_server_vm_start/stop() was added to help migration state (commit
f5bb039c6d).

However, a paused VM could keep running the spice server. This will
allow a Spice client to keep sending commands to a spice chardev. This
allows to stop/cont a VM from a Spice monitor port. Character
devices (vdagent/usb/smartcard/..) should not read from Spice when the
VM is paused.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21 14:09:17 +01:00
Marc-André Lureau 79216718f9 spice: merge options lists
Passing several -spice options to qemu command line, or calling
several time qemu_opts_set() will ignore all but the first option
list. Since the spice server is a singleton, it makes sense to merge
all the options, the last value being the one taken into account.

This changes the behaviour from, for ex:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5900
to:
$ qemu... -spice port=5900 -spice port=5901 -> port: 5901

(if necessary we could instead produce an error when an option is
given twice, although this makes handling default values and such more
complicated)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21 14:09:17 +01:00
Marc-André Lureau 83f7180227 spice: avoid spice runtime assert
The Spice server doesn't like to be started or stopped twice . It
aborts with:

(process:6191): Spice-ERROR **: 19:29:35.912: red-worker.c:623:handle_dev_start: assertion `!worker->running' failed

It's easy to avoid that situation since qemu spice_display_is_running
tracks the server state.

After the commit "spice: do not stop spice if VM is paused", it will
be possible to pause and resume the VM, and this will call
qemu_spice_display_start() twice. The easiest is to add a check for
spice_display_is_running with this patch to avoid the assert.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21 14:09:17 +01:00
Lukáš Hrázký be812c0ab7 spice: set device address and device display ID in QXL interface
Calls the new SPICE QXL interface function spice_qxl_set_device_info to
set the hardware address of the graphics device represented by the QXL
interface (e.g. a PCI path) and the device display IDs (the IDs of the
device's monitors that belong to this QXL interface).

Also stops using the deprecated spice_qxl_set_max_monitors, the new
interface function replaces it.

Signed-off-by: Lukáš Hrázký <lhrazky@redhat.com>
Message-Id: <20190215150919.8263-1-lhrazky@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-02-21 10:15:26 +01:00
Frediano Ziglio 766a0a54fa spice: Remove unused include
The definitions in the header are not  used.
Also this fixes porting SPICE to Windows where the header is not
available.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190107184404.31993-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-10 08:55:36 +01:00
Marc-André Lureau 1b63665c2c configure: bump spice-server required version to 0.12.5
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.

(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")

According to repology, all the distros that are build target platforms
for QEMU include it:

      RHEL-7: 0.14.0
      Debian (Stretch): 0.12.8
      Debian (Jessie): 0.12.5
      FreeBSD (ports): 0.14.0
      OpenSUSE Leap 15: 0.14.0
      Ubuntu (Xenial): 0.12.6

Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-10 08:55:13 +01:00
Markus Armbruster 9338570b7b spice: Clean up error reporting in add_channel()
Calling error_report() in a function that takes an Error ** argument
is suspicious.  add_channel() does that, and then exit()s.  Its caller
main(), via qemu_opts_foreach(), is fine with it, but clean it up
anyway.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-31-armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-19 14:51:34 +02:00
Peter Xu 3ab72385b2 qapi: Drop qapi_event_send_FOO()'s Error ** argument
The generated qapi_event_send_FOO() take an Error ** argument.  They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().

Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.

Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-28 18:21:38 +02:00
Gerd Hoffmann 54d208ffda Add gles support to egl-helpers, wire up in egl-headless and gtk.
Add support for OpenGL ES to egl-helpers.  Wire up the new option for
egl-headless and gtk UIs.  egl-headless actually works fine.  gtk hits a
not-yet implemented code path in libEGL when trying to use gles mode:

  libEGL warning: FIXME: egl/x11 doesn't support front buffer rendering.

(This is mesa 17.2.3).

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Message-id: 20180618112141.23398-1-kraxel@redhat.com
2018-06-26 13:48:49 +02:00
Markus Armbruster 9af2398977 Include less of the generated modular QAPI headers
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.

The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h.  Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.

To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects.  The next commit will
improve it further.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Markus Armbruster 922a01a013 Move include qemu/option.h from qemu-common.h to actual users
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter.  Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09 13:52:16 +01:00
Markus Armbruster bbcad965bf Drop superfluous includes of qapi/qmp/qjson.h
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-19-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster bd006b9818 Include qapi/qmp/qbool.h exactly where needed
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-15-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster fc81fa1eb0 Include qapi/qmp/qstring.h exactly where needed
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Frediano Ziglio abda476681 spice: remove unused timer list
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20171122135625.16625-4-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-12 14:35:58 +01:00
Frediano Ziglio 58a5d33aa8 spice: remove only written event_mask field
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20171122135625.16625-3-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-12 14:35:58 +01:00
Frediano Ziglio 44e8f22986 spice: remove unused watch list
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20171122135625.16625-2-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-12 14:35:58 +01:00
Peter Maydell 84e3d0725b QAPI patches for 2017-06-09
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZSRWrAAoJEDhwtADrkYZTVOQP/RK8br2A1Cn7LeVG6jnKz5hJ
 OqyII77x8I2RachWvnwxQeHPMEVDuz3y2WjL+80s6peXlpR6y/13w7oX0f6aiJuo
 +T9khTqMv2I7HsM5UCsXAJpFPHT7r90b4x8nstY80YLGe7lA7L6yk6PGyCxHThwA
 mOiTKDw6/Xb/yZGrS2Favrun7juNpAs0Ec1IAkaA8xsEgVkd6tDv281rmHqvibl/
 //90VfJp3nHFZ12FCQ1HzA42Eigtmo/fIk9LnAzBoYG0zw0cnzjuv0BNzs/JwuUZ
 /VskeD1cViQ4yzFnPpjOavjYjTN854/JTJzm7gZ7dTQ6/l3ykoY6NDE8p1BLuHlC
 p2RKkg20EeZlpOEtMQ4g6iyG6EUxaKcEiXmQ31LqN/LJwxTYbo5B5nCHMjrt4gxe
 MqFBJQSNsJ7QjZ7Qa7pADMCi/G0m7/0dN8vBqSr4vcbLVvdbw/yb/9s33wXGrUj1
 PyXM2ymi+vvSqcXtNXKshsJLxJSJxO1tm2tRIANDTabQ00yxs8dOYnQnbQFR94fp
 6nrE2PnjZqgqk69aNDJEbngj6Tgx44nyTr1+Q17juZf9nTCE5QmBE1J0IRoykCJn
 E8+T63ZxtIxVV2yLi5xBjmZaZtPyJRGGeUXunA10SuWrHzupEcBuhFhFYd2MFM5L
 fsojALN2K3Gdx2+CmAo2
 =O9Vv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging

QAPI patches for 2017-06-09

# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
  tests/qdict: check more get_try_int() cases
  console: use get_uint() for "head" property
  i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
  numa: use get_uint() for "size" property
  pnv-core: use get_uint() for "core-pir" property
  pvpanic: use get_uint() for "ioport" property
  auxbus: use get_uint() for "addr" property
  arm: use get_uint() for "mp-affinity" property
  xen: use get_uint() for "max-ram-below-4g" property
  pc: use get_uint() for "hpet-intcap" property
  pc: use get_uint() for "apic-id" property
  pc: use get_uint() for "iobase" property
  acpi: use get_uint() for "pci-hole*" properties
  acpi: use get_uint() for various acpi properties
  acpi: use get_uint() for "acpi-pcihp-io*" properties
  platform-bus: use get_uint() for "addr" property
  bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
  aspeed: use {set, get}_uint() for "ram-size" property
  pcihp: use get_uint() for "bsel" property
  pc-dimm: make "size" property uint64
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-22 11:34:39 +01:00
Marc-André Lureau 01b2ffcedd qapi: merge QInt and QFloat in QNum
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.

Add a few more tests while at it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20 14:31:31 +02:00
Gerd Hoffmann fe5c44f9c9 spice: don't enter opengl mode in case another UI provides opengl support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170606110618.10393-1-kraxel@redhat.com
2017-06-14 09:52:35 +02:00
Juan Quintela c4b63b7cc5 migration: Move remaining exported functions to migration/misc.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-13 11:00:45 +02:00
Gerd Hoffmann 8bf69b499a spice: add display & head options
This allows to specify display and head to use, simliar to vnc.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1487663858-11731-1-git-send-email-kraxel@redhat.com
2017-02-27 16:21:23 +01:00
Marc-André Lureau 7b5255083b spice: allow to specify drm rendernode
When multiple GPU are available, picking the first one isn't always the
best choice. Learn to specify a device rendernode.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170212112118.16044-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-20 12:44:32 +01:00
Fam Zheng 9c5ce8db2e vl: Switch qemu_uuid to QemuUUID
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.

Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
2016-09-23 11:42:52 +08:00
Cole Robinson daafc661cc ui: spice: Exit if gl=on EGL init fails
The user explicitly requested spice GL, so if we know it isn't
going to work we should exit

Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: e3789e35b16f9e3cc6f2652f91c52d88ba6d6936.1463588606.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-06-03 08:23:26 +02:00
Christophe Fergeau 569a93cbbe spice: Disallow use of gl + TCP port
Currently, virgl support has to go through a local unix socket, trying
to connect to a VM using -spice gl through spice://localhost:5900 will
only result in a black screen.
This commit errors out when the user tries to start a VM with both GL
support and a port/tls-port set.
This would fit better in spice-server, but currently QEMU does not call
into spice-server when parsing 'gl' on its command line, so we have to
do this check in QEMU instead.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1457955672-28758-1-git-send-email-cfergeau@redhat.com

[ applied codestyle fix: break long line ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-03-24 08:04:01 +01:00
Eduardo Habkost 34294e2f54 module: Rename machine_init() to opts_init()
The only remaining users of machine_init() only call
qemu_add_opts(). Rename machine_init() to opts_init() and move it
closer to the qemu_add_opts() calls on vl.c.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-03-16 15:54:23 -03:00
Dr. David Alan Gilbert b82fc321bf Postcopy+spice: Pass spice migration data earlier
Spice hooks the migration status changes to figure out when to
transmit information to the new spice server; but the migration
status in postcopy doesn't quite fit - the destination starts
running before the end of the source migration.

It's not a case of hanging off the migration status change to
postcopy-active either, since that happens before we stop the
guest CPU.

Fix it by sending a notify just after sending the device state,
and adding a flag that can be tested by the notify receiver.

Symptom:
   spice handover doesn't work with the error:
   red_worker.c:11540:display_channel_wait_for_migrate_data: timeout

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1456161452-25318-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-23 12:05:02 +01:00
Gerd Hoffmann 474114b730 spice: add opengl/virgl/dmabuf support
This adds support for dma-buf passing to spice.  This makes virtio-gpu
with 3d acceleration work with spice.

Workflow:
 * virglrenderer renders the guest command stream into a texture.
 * qemu exports the texture as dma-buf and passes on that dma-buf
   to spice-server.
 * spice-server passes the dma-buf to spice-client, using unix
   socket file descriptor passing.
 * spice-client asks the window systems composer to render the
   dma-buf to the screen.

Requires cutting edge spice (server) and spice-gtk (client) builds,
from git master branch.

Also requires libvirt managing your qemu instance, and using
"virt-viewer --attach $guest".  libvirt will connect spice-server and
spice-client using unix sockets instead of tcp sockets then, which
is required for file descriptor passing.

Works for the local case (spice server and client on the same machine)
only.  Supporting remote too is planned (by feeding the dma-bufs into
gpu-assisted video encoder), but not there yet.

gl mode is turned off by default, use "-spice gl=on,$otherargs" to
enable it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-02-23 12:04:39 +01:00
Peter Maydell e16f4c8770 ui: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-2-git-send-email-peter.maydell@linaro.org
2016-02-04 17:01:04 +00:00
Christophe Fergeau 06bb88145c Fix corner-case when using VNC+SASL+SPICE
Similarly to the commit 764eb39d1b fixing VNC+SASL+QXL, when starting
QEMU with SPICE but no SASL, and at the same time VNC with SASL, then
spice_server_init() will get called without a previous call to
spice_server_set_sasl_appname(), which will cause cyrus-sasl to
try to use /etc/sasl2/spice.conf (spice-server uses "spice" as its
default appname) rather than the expected /etc/sasl2/qemu.conf.

This commit unconditionally calls spice_server_set_sasl_appname()
before calling spice_server_init() in order to use the correct appname
even if SPICE without SASL was requested on qemu command line.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 1452607738-1521-1-git-send-email-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-18 16:36:21 +01:00
Eric Blake ddf2190896 qapi: Unbox base members
Rather than storing a base class as a pointer to a box, just
store the fields of that base class in the same order, so that
a child struct can be directly cast to its parent.  This gives
less malloc overhead, less pointer dereferencing, and even less
generated code.  Compare to the earlier commit 1e6c1616a "qapi:
Generate a nicer struct for flat unions" (although that patch
had fewer places to change, as less of qemu was directly using
qapi structs for flat unions).  It also allows us to turn on
automatic type-safe wrappers for upcasting to the base class
of a struct.

Changes to the generated code look like this in qapi-types.h:

| struct SpiceChannel {
|-    SpiceBasicInfo *base;
|+    /* Members inherited from SpiceBasicInfo: */
|+    char *host;
|+    char *port;
|+    NetworkAddressFamily family;
|+    /* Own members: */
|     int64_t connection_id;

as well as additional upcast functions like qapi_SpiceChannel_base().
Meanwhile, changes to qapi-visit.c look like:

| static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp)
| {
|     Error *err = NULL;
|
|-    visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err);
|+    visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err);
|     if (err) {

(the cast is necessary, since our upcast wrappers only deal with a
single pointer, not pointer-to-pointer); plus the wholesale
elimination of some now-unused visit_type_implicit_FOO() functions.

Without boxing, the corner case of one empty struct having
another empty struct as its base type now requires inserting a
dummy member (previously, the 'Base *base' member sufficed).

And now that we no longer consume a 'base' member in the generated
C struct, we can delete the former negative struct-base-clash-base
test.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02 08:30:26 +01:00
Markus Armbruster d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Markus Armbruster 71df1d8337 QemuOpts: Convert qemu_opt_foreach() to Error
Retain the function value for now, to permit selective conversion of
its callers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Markus Armbruster 1640b200d5 QemuOpts: Drop qemu_opt_foreach() parameter abort_on_failure
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.

When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.

The two callers that pass zero could just as well pass one:

* qemu_spice_init()'s callback add_channel() either returns zero or
  exit()s.

* config_write_opts()'s callback config_write_opt() always returns
  zero.

Drop the parameter, and always stop.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09 07:40:23 +02:00
Gerd Hoffmann 641381c1fc spice: don't update mm_time when spice-server is stopped.
Skip mm_time updates (in qxl device memory) in case the guest is stopped.
Guest isn't able to look anyway, and it causes problems with migration.

Also make sure the initial state for spice server is stopped.

Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-05-29 09:56:01 +02:00
Markus Armbruster 3b5704b2f8 monitor: Make client_migrate_info synchronous
Live migration with spice works like this today:

  (1) client_migrate_info monitor cmd
  (2) spice server notifies client, client connects to target host.
  (3) qemu waits until spice client connect is finished.
  (4) send over vmstate (i.e. main part of live migration).
  (5) spice handover to target host.

(3) is implemented by making client_migrate_info a async monitor
command.  This is the only async monitor command we have.

The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel.  That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.

Time to drop step (3).  This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-04-27 12:46:57 +02:00
Marc-André Lureau fe4831b1e7 spice: add unix address support
Teach qemu to set up a Spice server with a UNIX socket using the
following arguments -spice unix,addr=path.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-01-22 11:18:41 +01:00
Gonglei a41642708a spice: fix memory leak
If errors happen for middle items of channel_list,
qmp_query_spice_channels() returns NULL, and the variable
cur_item going out of scope leaks the storage it points to.

The flag is a compatibility thing for older spice-server
versions. Meanwhile our minimum spice version requirement is
new enough that we should never ever see this error, and if we
do something went very seriously wrong. Let's using assert()
instead of returning NULL to avoid a memory leak.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-16 14:15:29 +01:00
Marc-André Lureau e0883e2de0 spice: remove spice-experimental.h include
Nothing seems to be using functions from spice-experimental.h (better
that way). Let's remove its inclusion.

Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-16 14:15:29 +01:00
Marc-André Lureau cf7856adef spice: do not require TCP ports
It is possible to use Spice server without TCP port.  On local VM,
qemu (and libvirt) can add new clients thanks to QMP add_client command.

Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-16 14:15:29 +01:00
Marc-André Lureau 07d49a53b6 spice: call qemu_spice_set_passwd() during init
Don't call SPICE API directly to set password given in command line, but
use the internal API, saving password for later calls.

This solves losing password when changing expiration in qemu monitor.

https://bugzilla.redhat.com/show_bug.cgi?id=1138639

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-16 08:09:03 +02:00
Gerd Hoffmann cd56cc6b07 spice: use console index as display id
... instead of maintaining our own numbering.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-01 10:19:03 +02:00
Gonglei fe8e8327f1 spice: don't use 'Yoda conditions'
imitate nearby code about using '!value' or 'value == NULL'

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-15 18:54:07 +04:00