Commit Graph

69 Commits

Author SHA1 Message Date
Peter Maydell 2c91bcf273 iommu: Add IOMMU index argument to translate method
Add an IOMMU index argument to the translate method of
IOMMUs. Since all of our current IOMMU implementations
support only a single IOMMU index, this has no effect
on the behaviour.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-4-peter.maydell@linaro.org
2018-06-15 15:23:34 +01:00
Peter Maydell cb1efcf462 iommu: Add IOMMU index argument to notifier APIs
Add support for multiple IOMMU indexes to the IOMMU notifier APIs.
When initializing a notifier with iommu_notifier_init(), the caller
must pass the IOMMU index that it is interested in. When a change
happens, the IOMMU implementation must pass
memory_region_notify_iommu() the IOMMU index that has changed and
that notifiers must be called for.

IOMMUs which support only a single index don't need to change.
Callers which only really support working with IOMMUs with a single
index can use the result of passing MEMTXATTRS_UNSPECIFIED to
memory_region_iommu_attrs_to_index().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-3-peter.maydell@linaro.org
2018-06-15 15:23:34 +01:00
Alexey Kardashevskiy 9ded780c4c spapr/iommu: Enable in-kernel TCE acceleration via VFIO KVM device
In order to enable TCE operations support in KVM, we have to inform
the KVM about VFIO groups being attached to specific LIOBNs;
the necessary bits are implemented already by IOMMU MR and VFIO.

This defines get_attr() for the SPAPR TCE IOMMU MR which makes VFIO
call the KVM_DEV_VFIO_GROUP_SET_SPAPR_TCE ioctl and establish
LIOBN-to-IOMMU link.

This changes spapr_tce_set_need_vfio() to avoid TCE table reallocation
if the kernel supports the TCE acceleration.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
[aw - remove unnecessary sys/ioctl.h include]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-02-06 11:08:24 -07:00
Dr. David Alan Gilbert 44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
Alexey Kardashevskiy f5509b6beb spapr_iommu: Realloc guest visible TCE table when hot(un)plugging vfio-pci
This replaces g_malloc() with spapr_tce_alloc_table() as this is
the standard way of allocating tables and this allows moving the table
back to KVM when unplugging a VFIO PCI device and VFIO TCE acceleration
support is not present in the KVM.

Although spapr_tce_alloc_table() is expected to fail with EBUSY
if called when previous fd is not closed yet, in practice we will not
see it because cap_spapr_vfio is false at the moment.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08 09:30:55 +10:00
Greg Kurz ea359d20e6 spapr_iommu: unregister vmstate at unrealize time
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08 09:30:54 +10:00
Michael Roth 8dc9785ca0 spapr_iommu: pass object ownership to parent/owner
TCE table objects attach themselves to an owner as a child
property. unref afterward to allow them to be finalized
when their owner is finalized.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08 09:30:54 +10:00
Greg Kurz a931ad137a spapr_iommu: convert TCE table object to realize()
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08 09:30:54 +10:00
Greg Kurz a205a053dc spapr_iommu: use g_strdup_printf() instead of snprintf()
Passing a stack allocated buffer of arbitrary length to snprintf()
without checking the return value can cause the resultant strings
to be silently truncated.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08 09:30:54 +10:00
Thomas Huth 1f98e55385 hw/ppc/spapr_iommu: Fix crash when removing the "spapr-tce-table" device
QEMU currently aborts unexpectedly when the user tries to add and
remove a "spapr-tce-table" device:

$ qemu-system-ppc64 -nographic -S -nodefaults -monitor stdio
QEMU 2.9.92 monitor - type 'help' for more information
(qemu) device_add spapr-tce-table,id=x
(qemu) device_del x
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)

The device should not be accessable for the users at all, it's just
used internally, so mark it with user_creatable = false.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-08-22 21:26:46 +10:00
Peter Maydell 6c6076662d * gdbstub fixes (Alex)
* IOMMU MemoryRegion subclass (Alexey)
 * Chardev hotswap (Anton)
 * NBD_OPT_GO support (Eric)
 * Misc bugfixes
 * DEFINE_PROP_LINK (minus the ARM patches - Fam)
 * MAINTAINERS updates (Philippe)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJZaJejAAoJEL/70l94x66DwQ4H/0NUvh/Zfs64wE1iuZJACc24
 1za02fFaB50vFDwQKWbM0GkHzDxoXBHk4Rvn92p+VSxpKtaAX4GRwCvxRA5GeUtm
 GAYbdIJUe0UELepKExrlUVzQcK9VfljoJpK3dZkP5Zzx83L2PAI/SexrZRibN2Uf
 yRI60uvlsMWU12nenzdVnYORd+TWDNKele7BhMrX/FX9wxaS1PlnsnKZggy6CU7G
 8dwZJAZJ/s5tRGXyXyAQzLm5JZQCLnA6jxya540TbPeciFgbvvS2ydIitZ54vSPO
 VtmZ1rSWfTEbNF5xGD1Ztu8aAENr5/I05l6IjxZd45BdUCW3HxeJkc+7lE0K4uk=
 =wnVs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* gdbstub fixes (Alex)
* IOMMU MemoryRegion subclass (Alexey)
* Chardev hotswap (Anton)
* NBD_OPT_GO support (Eric)
* Misc bugfixes
* DEFINE_PROP_LINK (minus the ARM patches - Fam)
* MAINTAINERS updates (Philippe)

# gpg: Signature made Fri 14 Jul 2017 11:06:27 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (55 commits)
  spapr_rng: Convert to DEFINE_PROP_LINK
  cpu: Convert to DEFINE_PROP_LINK
  mips_cmgcr: Convert to DEFINE_PROP_LINK
  ivshmem: Convert to DEFINE_PROP_LINK
  dimm: Convert to DEFINE_PROP_LINK
  virtio-crypto: Convert to DEFINE_PROP_LINK
  virtio-rng: Convert to DEFINE_PROP_LINK
  virtio-scsi: Convert to DEFINE_PROP_LINK
  virtio-blk: Convert to DEFINE_PROP_LINK
  qdev: Add const qualifier to PropertyInfo definitions
  qmp: Use ObjectProperty.type if present
  qdev: Introduce DEFINE_PROP_LINK
  qdev: Introduce PropertyInfo.create
  qom: enforce readonly nature of link's check callback
  translate-all: remove redundant !tcg_enabled check in dump_exec_info
  vl: fix breakage of -tb-size
  nbd: Implement NBD_INFO_BLOCK_SIZE on client
  nbd: Implement NBD_INFO_BLOCK_SIZE on server
  nbd: Implement NBD_OPT_GO on client
  nbd: Implement NBD_OPT_GO on server
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14 12:16:09 +01:00
Alexey Kardashevskiy 1221a47467 memory/iommu: introduce IOMMUMemoryRegionClass
This finishes QOM'fication of IOMMUMemoryRegion by introducing
a IOMMUMemoryRegionClass. This also provides a fastpath analog for
IOMMU_MEMORY_REGION_GET_CLASS().

This makes IOMMUMemoryRegion an abstract class.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170711035620.4232-3-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 12:04:41 +02:00
Alexey Kardashevskiy 3df9d74806 memory/iommu: QOM'fy IOMMU MemoryRegion
This defines new QOM object - IOMMUMemoryRegion - with MemoryRegion
as a parent.

This moves IOMMU-related fields from MR to IOMMU MR. However to avoid
dymanic QOM casting in fast path (address_space_translate, etc),
this adds an @is_iommu boolean flag to MR and provides new helper to
do simple cast to IOMMU MR - memory_region_get_iommu. The flag
is set in the instance init callback. This defines
memory_region_is_iommu as memory_region_get_iommu()!=NULL.

This switches MemoryRegion to IOMMUMemoryRegion in most places except
the ones where MemoryRegion may be an alias.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20170711035620.4232-2-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 12:04:41 +02:00
Alistair Francis 3dc6f86936 Convert error_report() to warn_report()
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.

All of the warnings were changed using these two commands:
    find ./* -type f -exec sed -i \
      's|error_report(".*warning[,:] |warn_report("|Ig' {} +

Indentation fixed up manually afterwards.

The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-13 13:49:58 +02:00
Halil Pasic d2164ad35c vmstate: error hint for failed equal checks
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.

Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>

Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-06-28 11:18:44 +02:00
Peter Xu bf55b7afce memory: tune last param of iommu_ops.translate()
This patch converts the old "is_write" bool into IOMMUAccessFlags. The
difference is that "is_write" can only express either read/write, but
sometimes what we really want is "none" here (neither read nor write).
Replay is an good example - during replay, we should not check any RW
permission bits since thats not an actual IO at all.

CC: Paolo Bonzini <pbonzini@redhat.com>
CC: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
2017-05-25 21:25:27 +03:00
Alexey Kardashevskiy d6ee2a7c85 target-ppc: kvm: make use of KVM_CREATE_SPAPR_TCE_64
KVM_CAP_SPAPR_TCE capability allows creating TCE tables in KVM which
allows having in-kernel acceleration for H_PUT_TCE_xxx hypercalls.
However it only supports 32bit DMA windows at zero bus offset.

There is a new KVM_CAP_SPAPR_TCE_64 capability which supports 64bit
window size, variable page size and bus offset.

This makes use of the new capability. The kernel headers are already
updated as the kernel support went in to v4.6.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26 12:00:41 +10:00
Peter Xu 5bf3d31903 memory: introduce IOMMUOps.notify_flag_changed
The new interface can be used to replace the old notify_started() and
notify_stopped(). Meanwhile it provides explicit flags so that IOMMUs
can know what kind of notifications it is requested for.

Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-27 09:00:04 +02:00
Cédric Le Goater ce9863b797 hw/ppc: use error_report instead of fprintf
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-07 12:40:12 +10:00
David Gibson 57c0eb1e0d spapr: Fix undefined behaviour in spapr_tce_reset()
When a TCE table (sPAPR IOMMU context) is in disabled state (which is true
by default for the 64-bit window), it has tcet->nb_table == 0 and
tcet->table == NULL.  However, on system reset, spapr_tce_reset() executes,
which unconditionally calls
        memset(tcet->table, 0, table_size);

We get away with this in practice, because it's a zero length memset(),
but memset() on a NULL pointer is undefined behaviour, so we should not
call it in this case.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-08-08 10:06:25 +10:00
Alexey Kardashevskiy 606b54986d spapr_iommu: Realloc guest visible TCE table when starting/stopping listening
The sPAPR TCE tables manage 2 copies when VFIO is using an IOMMU -
a guest view of the table and a hardware TCE table. If there is no VFIO
presense in the address space, then just the guest view is used, if
this is the case, it is allocated in the KVM. However since there is no
support yet for VFIO in KVM TCE hypercalls, when we start using VFIO,
we need to move the guest view from KVM to the userspace; and we need
to do this for every IOMMU on a bus with VFIO devices.

This implements the callbacks for the sPAPR IOMMU - notify_started()
reallocated the guest view to the user space, notify_stopped() does
the opposite.

This removes explicit spapr_tce_set_need_vfio() call from PCI hotplug
path as the new callbacks do this better - they notify IOMMU at
the exact moment when the configuration is changed, and this also
includes the case of PCI hot unplug.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-05 10:43:02 +10:00
Alexey Kardashevskiy f682e9c244 memory: Add reporting of supported page sizes
Every IOMMU has some granularity which MemoryRegionIOMMUOps::translate
uses when translating, however this information is not available outside
the translate context for various checks.

This adds a get_min_page_size callback to MemoryRegionIOMMUOps and
a wrapper for it so IOMMU users (such as VFIO) can know the minimum
actual page size supported by an IOMMU.

As IOMMU MR represents a guest IOMMU, this uses TARGET_PAGE_SIZE
as fallback.

This removes vfio_container_granularity() and uses new helper in
memory_region_iommu_replay() when replaying IOMMU mappings on added
IOMMU memory region.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[dwg: Removed an unnecessary calculation]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-22 11:13:09 +10:00
Alexey Kardashevskiy b4b6eb771a spapr_iommu: Add root memory region
We are going to have multiple DMA windows at different offsets on
a PCI bus. For the sake of migration, we will have as many TCE table
objects pre-created as many windows supported.
So we need a way to map windows dynamically onto a PCI bus
when migration of a table is completed but at this stage a TCE table
object does not have access to a PHB to ask it to map a DMA window
backed by just migrated TCE table.

This adds a "root" memory region (UINT64_MAX long) to the TCE object.
This new region is mapped on a PCI bus with enabled overlapping as
there will be one root MR per TCE table, each of them mapped at 0.
The actual IOMMU memory region is a subregion of the root region and
a TCE table enables/disables this subregion and maps it at
the specific offset inside the root MR which is 1:1 mapping of
a PCI address space.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-07 10:17:45 +10:00
Alexey Kardashevskiy a26fdf3934 spapr_iommu: Migrate full state
The source guest could have reallocated the default TCE table and
migrate bigger/smaller table. This adds reallocation in post_load()
if the default table size is different on source and destination.

This adds @bus_offset, @page_shift to the migration stream as
a subsection so when DDW is added, migration to older machines will
still be possible. As @bus_offset and @page_shift are not used yet,
this makes no change in behavior.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-07 10:17:45 +10:00
Alexey Kardashevskiy df7625d422 spapr_iommu: Introduce "enabled" state for TCE table
Currently TCE tables are created once at start and their sizes never
change. We are going to change that by introducing a Dynamic DMA windows
support where DMA configuration may change during the guest execution.

This changes spapr_tce_new_table() to create an empty zero-size IOMMU
memory region (IOMMU MR). Only LIOBN is assigned by the time of creation.
It still will be called once at the owner object (VIO or PHB) creation.

This introduces an "enabled" state for TCE table objects, some
helper functions are added:
- spapr_tce_table_enable() receives TCE table parameters, stores in
sPAPRTCETable and allocates a guest view of the TCE table
(in the user space or KVM) and sets the correct size on the IOMMU MR;
- spapr_tce_table_disable() disposes the table and resets the IOMMU MR
size; it is made public as the following DDW code will be using it.

This changes the PHB reset handler to do the default DMA initialization
instead of spapr_phb_realize(). This does not make differenct now but
later with more than just one DMA window, we will have to remove them all
and create the default one on a system reset.

No visible change in behaviour is expected except the actual table
will be reallocated every reset. We might optimize this later.

The other way to implement this would be dynamically create/remove
the TCE table QOM objects but this would make migration impossible
as the migration code expects all QOM objects to exist at the receiver
so we have to have TCE table objects created when migration begins.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-07 10:17:45 +10:00
Alexey Kardashevskiy fec5d3a1cd spapr_iommu: Move table allocation to helpers
At the moment presence of vfio-pci devices on a bus affect the way
the guest view table is allocated. If there is no vfio-pci on a PHB
and the host kernel supports KVM acceleration of H_PUT_TCE, a table
is allocated in KVM. However, if there is vfio-pci and we do yet not
KVM acceleration for these, the table has to be allocated by
the userspace. At the moment the table is allocated once at boot time
but next patches will reallocate it.

This moves kvmppc_create_spapr_tce/g_malloc0 and their counterparts
to helpers.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-27 09:40:23 +10:00
Alexey Kardashevskiy d78c19b5cf memory: Fix IOMMU replay base address
Since a788f227 "memory: Allow replay of IOMMU mapping notifications"
when new VFIO listener is added, all existing IOMMU mappings are
replayed. However there is a problem that the base address of
an IOMMU memory region (IOMMU MR) is ignored which is not a problem
for the existing user (which is pseries) with its default 32bit DMA
window starting at 0 but it is if there is another DMA window.

This stores the IOMMU's offset_within_address_space and adjusts
the IOVA before calling vfio_dma_map/vfio_dma_unmap.

As the IOMMU notifier expects IOVA offset rather than the absolute
address, this also adjusts IOVA in sPAPR H_PUT_TCE handler before
calling notifier(s).

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-05-26 11:12:08 -06:00
Paolo Bonzini 03dd024ff5 hw: explicitly include qemu/log.h
Move the inclusion out of hw/hw.h, most files do not need it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:29 +02:00
Peter Maydell 0d75590d91 ppc: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
David Gibson c10325d6f9 spapr_iommu: Provide a function to switch a TCE table to allowing VFIO
Because of the way non-VFIO guest IOMMU operations are KVM accelerated, not
all TCE tables (guest IOMMU contexts) can support VFIO devices.  Currently,
this is decided at creation time.

To support hotplug of VFIO devices, we need to allow a TCE table which
previously didn't allow VFIO devices to be switched so that it can.  This
patch adds an spapr_tce_set_need_vfio() function to do this, by
reallocating the table in userspace if necessary.

Currently this doesn't allow the KVM acceleration to be re-enabled if all
the VFIO devices are removed.  That's an optimization for another time.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2015-10-23 10:38:10 +11:00
David Gibson 6a81dd172c spapr_iommu: Rename vfio_accel parameter
The vfio_accel parameter used when creating a new TCE table (guest IOMMU
context) has a confusing name.  What it really means is whether we need the
TCE table created to be able to support VFIO devices.

VFIO is relevant, because when available we use in-kernel acceleration of
the TCE table, but that may not work with VFIO devices because updates to
the table are handled in kernel, bypass qemu and so don't hit qemu's
infrastructure for keeping the VFIO host IOMMU state in sync with the guest
IOMMU state.

Rename the parameter to "need_vfio" throughout.  This is a cosmetic change,
with no impact on the logic.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2015-10-23 10:38:10 +11:00
Greg Kurz 5709af3b95 spapr_iommu: translate sPAPRTCEAccess to IOMMUAccessFlags
The fact that these enums have matching values is pure coincidence. We
actually need to translate from the PAPR definition to the QEMU one.

This patch doesn't fix any bug, it is only code cleanup.

Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07 17:44:51 +02:00
Greg Kurz 4d9ab7d4ed spapr_iommu: drop erroneous check in h_put_tce_indirect()
The tce_list variable is not a TCE but the address to a TCE: we shouldn't
clear permission bits as we do now. And this is dead code anyway since we
check tce_list is 4K aligned a few lines above.

This patch doesn't fix any bug, it is only code cleanup.

Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07 17:44:51 +02:00
David Gibson 28e0204254 spapr: Merge sPAPREnvironment into sPAPRMachineState
The code for -machine pseries maintains a global sPAPREnvironment structure
which keeps track of general state information about the guest platform.
This predates the existence of the MachineState structure, but performs
basically the same function.

Now that we have the generic MachineState, fold sPAPREnvironment into
sPAPRMachineState, the pseries specific subclass of MachineState.

This is mostly a matter of search and replace, although a few places which
relied on the global spapr variable are changed to find the structure via
qdev_get_machine().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07 17:44:50 +02:00
Thomas Huth f9ce8e0aa3 hw/ppc/spapr_iommu: Fix the check for invalid upper bits in liobn
The check "liobn & 0xFFFFFFFF00000000ULL" in spapr_tce_find_by_liobn()
is completely useless since liobn is only declared as an uint32_t
parameter. Fix this by using target_ulong instead (this is what most
of the callers of this function are using, too).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:51 +02:00
Alexey Kardashevskiy dea1b3ce75 spapr_iommu: Give unique QOM name to TCE table
Useful for debugging.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:51 +02:00
Alexey Kardashevskiy fae807a2b1 spapr_iommu: Make spapr_tce_find_by_liobn() public
At the moment spapr_tce_find_by_liobn() is used by H_PUT_TCE/...
handlers to find an IOMMU by LIOBN.

We are going to implement Dynamic DMA windows (DDW), new code
will go to a new file and we will use spapr_tce_find_by_liobn()
there too so let's make it public.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:51 +02:00
Alexey Kardashevskiy d9d96a3cc7 spapr_iommu: Add separate trace points for PCI DMA operations
This is to reduce VIO noise while debugging PCI DMA.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:51 +02:00
Alexey Kardashevskiy f1215ea702 spapr_iommu: Make H_PUT_TCE_INDIRECT endian-safe
PAPR is defined as big endian so TCEs need an adjustment so
does this patch.

This changes code to have ldq_be_phys() in one place.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:50 +02:00
Alexey Kardashevskiy 12fd285358 spapr_iommu: Disable in-kernel IOMMU tables for >4GB windows
The existing KVM_CREATE_SPAPR_TCE ioctl only support 4G windows max as
the window size parameter to the kernel ioctl() is 32-bit so
there's no way of expressing a TCE window > 4GB.

We are going to add huge DMA windows support so this will create small
window and unexpectedly fail later.

This disables KVM_CREATE_SPAPR_TCE for windows bigger that 4GB.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:50 +02:00
Alexey Kardashevskiy ee9a569ab8 spapr_vio/spapr_iommu: Move VIO bypass where it belongs
Instead of tweaking a TCE table device by adding there a bypass flag,
let's add an alias to RAM and IOMMU memory region, and enable/disable
those according to the selected bypass mode.
This way IOMMU memory region can have size of the actual window rather
than ram_size which is essential for upcoming DDW support.

This moves bypass logic to VIO layer and keeps @bypass flag in TCE table
for migration compatibility only. This replaces spapr_tce_set_bypass()
calls with explicit assignment to avoid confusion as the function could
do something more that just syncing the @bypass flag.

This adds a pointer to VIO device into the sPAPRTCETable struct to provide
the sPAPRTCETable device a way to update bypass mode for the VIO device.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09 14:59:52 +01:00
Paolo Bonzini 79e2b9aecc exec: RCUify AddressSpaceDispatch
Note that even after this patch, most callers of address_space_*
functions must still be under the big QEMU lock, otherwise the memory
region returned by address_space_translate can disappear as soon as
address_space_translate returns.  This will be fixed in the next part
of this series.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-16 17:30:19 +01:00
David Gibson 5f9490de56 PPC: Fix crash on spapr_tce_table_finalize()
spapr_tce_table_finalize() can SEGV if the object was not previously
realized.  In particular this can be triggered by running
         qemu-system-ppc -device spapr-tce-table,?

The basic problem is that we have mismatched initialization versus
finalization: spapr_tce_table_finalize() is attempting to undo things that
are done in spapr_tce_table_realize(), not an instance_init function.

Therefore, replace spapr_tce_table_finalize() with
spapr_tce_table_unrealize().

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cc: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07 16:16:26 +01:00
Le Tan 8d7b8cb9c2 iommu: add is_write as a parameter to the translate function of MemoryRegionIOMMUOps
Add a bool variable is_write as a parameter to the translate function of
MemoryRegionIOMMUOps to indicate the operation of the access. It can be
used for correct fault reporting from within the callback.
Change the interface of related functions.

Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-28 23:10:22 +02:00
Gavin Shan 27e27782f7 sPAPR/IOMMU: Fix TCE entry permission
The permission of TCE entry should exclude physical base address.
Otherwise, unmapping TCE entry can be interpreted to mapping TCE
entry wrongly for VFIO devices.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-15 16:11:59 +02:00
Alexey Kardashevskiy 9bb62a0702 spapr_iommu: Make in-kernel TCE table optional
POWER KVM supports an KVM_CAP_SPAPR_TCE capability which allows allocating
TCE tables in the host kernel memory and handle H_PUT_TCE requests
targeted to specific LIOBN (logical bus number) right in the host without
switching to QEMU. At the moment this is used for emulated devices only
and the handler only puts TCE to the table. If the in-kernel H_PUT_TCE
handler finds a LIOBN and corresponding table, it will put a TCE to
the table and complete hypercall execution. The user space will not be
notified.

Upcoming VFIO support is going to use the same sPAPRTCETable device class
so KVM_CAP_SPAPR_TCE is going to be used as well. That means that TCE
tables for VFIO are going to be allocated in the host as well.
However VFIO operates with real IOMMU tables and simple copying of
a TCE to the real hardware TCE table will not work as guest physical
to host physical address translation is requited.

So until the host kernel gets VFIO support for H_PUT_TCE, we better not
to register VFIO's TCE in the host.

This adds a place holder for KVM_CAP_SPAPR_TCE_VFIO capability. It is not
in upstream yet and being discussed so now it is always false which means
that in-kernel VFIO acceleration is not supported.

This adds a bool @vfio_accel flag to the sPAPRTCETable device telling
that sPAPRTCETable should not try allocating TCE table in the host kernel
for VFIO. The flag is false now as at the moment there is no VFIO.

This adds an vfio_accel parameter to spapr_tce_new_table(), the semantic
is the same. Since there is only emulated PCI and VIO now, the flag is set
to false. Upcoming VFIO support will set it to true.

This is a preparation patch so no change in behaviour is expected

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:23 +02:00
Alexey Kardashevskiy 1b8eceee28 spapr_iommu: Introduce bus_offset in sPAPRTCETable
This adds @bus_offset into sPAPRTCETable to tell where TCE table starts
from. It is set to 0 for emulated devices. Dynamic DMA windows will use
other offset.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy 650f33adbd spapr_iommu: Introduce page_shift in sPAPRTCETable
At the moment only 4K pages are supported by sPAPRTCETable. Since sPAPR
spec allows other page sizes and we are going to implement them, we need
page size to be configrable.

This adds @page_shift into sPAPRTCETable and replaces SPAPR_TCE_PAGE_SHIFT
with it where it is possible.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy 523e7b8ab8 spapr_iommu: Get rid of window_size in sPAPRTCETable
This removes window_size as it is basically a copy of nb_table
shifted by SPAPR_TCE_PAGE_SHIFT. As new dynamic DMA windows are
going to support windows as big as the entire RAM and this number
will be bigger that 32 capacity, we will have to do something
about @window_size anyway and removal seems to be the right way to go.

This removes dma_window_start/dma_window_size from sPAPRPHBState as
they are no longer used.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00
Alexey Kardashevskiy e4c35b78bc spapr_iommu: Convert old qdev_init_nofail() to object_property_set_bool
qdev_init_nofail() was replaced by object_property_set_bool("realized")
all over the QEMU so do we.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:39 +02:00