Exercise the DETECT mechanism of the GPIO peripheral.
Signed-off-by: Chris Laplante <chris@laplante.io>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230728160324.1159090-7-chris@laplante.io
[PMM: fixed coding style nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds qtest_irq_intercept_out_named method, which utilizes a new optional
name parameter to the irq_intercept_out qtest command.
Signed-off-by: Chris Laplante <chris@laplante.io>
Message-id: 20230728160324.1159090-4-chris@laplante.io
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without -S we run into potential races with tests starting before the
gdbstub attaches. We don't need to worry about user-mode as enabling
the gdbstub implies we wait for the initial connection.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230810153640.1879717-7-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When load_atom_extract_al16_or_al8 is inexpensive, we want to use
it early, in order to avoid the overhead of required_atomicity.
However, we must not read past the end of the page.
If there are more than 8 bytes remaining, then both the "aligned 16"
and "aligned 8" paths align down so that the read has at least
16 bytes remaining on the page.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This test fails when host page size != guest page size,
because qemu may not be able to directly map the file.
Fixes: a634148269 ("tests/tcg: Add a test for info proc mappings")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expected change is that _ADR object is removed from
hostbridge descriptor in DSDT for PC and Q35 machines.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following change is expected on each PCI slot with enabled
ACPI PCI hotplug
- BSEL,
- ASUN
+ Zero,
+ Zero
}
+ Local0 [Zero] = BSEL /* \_SB_.PCI0.BSEL */
+ Local0 [One] = ASUN /* \_SB_.PCI0.S18_.ASUN */
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230720133858.1974024-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A build of GCC 13.2 will have stack protector enabled by default if it
was configured with --enable-default-ssp option. For such a compiler,
it is necessary to explicitly disable stack protector when linking
without standard libraries.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230731091042.139159-2-akihiko.odaki@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The Postcopy preempt capability is expected to be set before incoming
starts, so change the postcopy tests to start with deferred incoming and
call migrate-incoming after the cap has been set.
Why the existing tests (without this patch) didn't fail?
There could be two reasons:
1) "backlog" specifies the number of pending connections. As long as the
server accepts the connections faster than the clients side connecting,
connection will succeed. For the preempt test, it uses only 2 channels,
so very likely to not have pending connections.
2) per my tests (on kernel 6.2), the number of pending connections allowed
is actually "backlog + 1", which is 2 in this case.
That said, the implementation of socket_start_incoming_migration_internal
expects "migrate defer" to be used, and for safety, change the test to
work with the expected usage.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230606101910.20456-3-wei.w.wang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
And it needs to be in both source and target, so put it on arch_opts.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-7-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will contain the options needed for both source and target.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230608224943.3877-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It makes no sense that we don't have the same configuration on both sides.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20230608224943.3877-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The virtio-gpu test is known to be flaky - that's why we also did
not enable the test_s390x_fedora in the gitlab CI. However, a flaky
test can also be annoying when testing locally, so let's rather skip
this subtest by default and start running the test_s390x_fedora test
in the gitlab CI again (since the other things that are tested here
are quite valuable).
Message-Id: <20230724084851.24251-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests from tests/avocado/migration.py do not work at all
on s390x - the bios shuts down immediately when it cannot find
a boot disk, so there is nothing left to migrate here. For doing
a proper migration test, we would need a proper payload, but we
already do such tests in the migration *qtest*, so it is unnecessary
to redo such a test here, thus let's simply remove this test.
Message-Id: <20230721164346.10112-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-15-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-14-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-13-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-12-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-11-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-10-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-9-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test fails occasionally, see e.g.:
https://gitlab.com/thuth/qemu/-/jobs/4196177756#L489https://gitlab.com/thuth/qemu/-/jobs/4623296271#L290
It also fails on my laptop in ca. 50% of all runs. Thus disable it by
default by using the QEMU_TEST_FLAKY_TESTS environment variable to fence
it (which we also already use in flaky qtests). While we're at it, also
document this variable in docs/devel/testing.rst.
Message-Id: <20230710170155.7192-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Get an up-to-date package list from lcitool, that way we
don't need to manually keep this array in sync.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Inspired-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230711144922.67491-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the get_qemu_packages_from_lcitool_json() helper which return
such package list from a lcitool env var file in JSON format.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230711144922.67491-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Refresh the generated files by running:
$ make lcitool-refresh
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230711144922.67491-3-philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Drop changes to libpmem-dev and libxen-dev]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the generate_pkglist() helper to generate a list of packages
required by a distribution to build QEMU.
Since we can not add a "THIS FILE WAS AUTO-GENERATED" comment in
JSON, create the files under tests/vm/generated/ sub-directory;
add a README mentioning the files are generated.
Suggested-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20230711144922.67491-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This wasn't noticed because the test is currently disabled.
Fixes: 02f56e3de ("tests/qtest: massively speed up migration-test")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230711212131.2370-1-farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
=RsOh
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,pci,virtio: cleanups, fixes, features
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
# qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
# D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
# n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
# cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
# UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
# =RsOh
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits)
vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature
vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ
vdpa: Avoid forwarding large CVQ command failures
vdpa: Accessing CVQ header through its structure
vhost: Fix false positive out-of-bounds
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature
vdpa: Restore MAC address filtering state
vdpa: Use iovec for vhost_vdpa_net_load_cmd()
pcie: Specify 0 for ARI next function numbers
pcie: Use common ARI next function number
include/hw/virtio: document some more usage of notifiers
include/hw/virtio: add kerneldoc for virtio_init
include/hw/virtio: document virtio_notify_config
hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments
include/hw: document the device_class_set_parent_* fns
include: attempt to document device_class_set_props
vdpa: Fix possible use-after-free for VirtQueueElement
pcie: Add hotplug detect state register to cmask
virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The test attaches a SCSI controller to a non-zero slot and a pcie-to-pci bridge
on slot 0 on the same pcie-root-port. Since a downstream device can be attached
to a pcie-root-port only on slot 0, the above test configuration is not allowed.
Additionally using pcie.0 as id for pcie-to-pci bridge is incorrect as that id
is reserved only for the root bus.
In the test scenario, there is no need to attach a pcie-root-port to the
root complex. A SCSI controller can be attached to a pcie-to-pci bridge
which can then be directly attached to the root bus (pcie.0).
Fix the test and simplify it.
CC: mst@redhat.com
CC: imammedo@redhat.com
CC: Michael Labiuk <michael.labiuk@virtuozzo.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230705115925.5339-5-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIE ports only have one slot, slot 0. Hence, non-zero slots are not available
for PCIE devices on PCIE root ports. Fix test_acpi_q35_tcg_no_acpi_hotplug()
so that the test does not use them.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230705115925.5339-3-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are going to fix bio-tables-test in the next patch and hence need to
make sure the acpi tests continue to pass.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230705115925.5339-2-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
-----BEGIN PGP SIGNATURE-----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=3XFD
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
riscv: Add support for the Zfa extension
target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
target/riscv: update multi-letter extension KVM properties
target/riscv/cpu.c: create KVM mock properties
target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
target/riscv/cpu.c: add satp_mode properties earlier
target/riscv/kvm.c: add multi-letter extension KVM properties
target/riscv/kvm.c: update KVM MISA bits
target/riscv: add KVM specific MISA properties
target/riscv/cpu: add misa_ext_info_arr[]
target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
target/riscv: use KVM scratch CPUs to init KVM properties
target/riscv/cpu.c: restrict 'marchid' value
target/riscv/cpu.c: restrict 'mimpid' value
target/riscv/cpu.c: restrict 'mvendorid' value
hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
target/riscv: skip features setup for KVM CPUs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't have a virtio-scmi implementation in QEMU and only support a
vhost-user backend. This is very similar to virtio-gpio and we add the same
set of tests, just passing some vhost-user messages over the control socket.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230628100524.342666-4-mzamazal@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The migration test cases that actually exercise live migration want to
ensure there is a minimum of two iterations of pre-copy, in order to
exercise the dirty tracking code.
Historically we've queried the migration status, looking for the
'dirty-sync-count' value to increment to track iterations. This was
not entirely reliable because often all the data would get transferred
quickly enough that the migration would finish before we wanted it
to. So we massively dropped the bandwidth and max downtime to
guarantee non-convergance. This had the unfortunate side effect
that every migration took at least 30 seconds to run (100 MB of
dirty pages / 3 MB/sec).
This optimization takes a different approach to ensuring that a
mimimum of two iterations. Rather than waiting for dirty-sync-count
to increment, directly look for an indication that the source VM
has dirtied RAM that has already been transferred.
On the source VM a magic marker is written just after the 3 MB
offset. The destination VM is now montiored to detect when the
magic marker is transferred. This gives a guarantee that the
first 3 MB of memory have been transferred. Now the source VM
memory is monitored at exactly the 3MB offset until we observe
a flip in its value. This gives us a guaranteed that the guest
workload has dirtied a byte that has already been transferred.
Since we're looking at a place that is only 3 MB from the start
of memory, with the 3 MB/sec bandwidth, this test should complete
in 1 second, instead of 30 seconds.
Once we've proved there is some dirty memory, migration can be
set back to full speed for the remainder of the 1st iteration,
and the entire of the second iteration at which point migration
should be complete.
On a test machine this further reduces the migration test time
from 8 minutes to 1 minute 40.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230601161347.1803440-11-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
clang does not support expressions involving symbols in instructions
like lghi yet, so building hello-s390x-asm.S with it fails.
Move the expression to the literal pool and load it from there.
Fixes: be4a4cb429 ("tests/tcg/s390x: Test single-stepping SVC")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230707154242.457706-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test that we can successfully parse the docs/config/q35-emulated.cfg,
docs/config/q35-virtio-graphical.cfg and docs/config/q35-virtio-serial.cfg
config files (the "...-serial.cfg" file is a subset of the graphical
config file, so we skip that in quick mode).
These config files use two hard-coded image names which we have to
replace with unique temporary files to avoid race conditions in case
the tests are run in parallel. So after creating the temporary image
files, we also have to create a copy of the config file where we
replaced the hard-coded image names.
If KVM is not available, we also have to disable the "accel" lines.
Once everything is in place, we can start QEMU with the modified
config file and check that everything is available in QEMU.
Message-Id: <20230704071655.75381-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These two functions can be useful for other qtests beside the
qos-test, too, so move them to libqtest instead.
Message-Id: <20230704071655.75381-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make test_x86_memdev_resp() more flexible by allowing arbitrary
memory sizes as parameter here.
Message-Id: <20230704071655.75381-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-13-iii@linux.ibm.com>
[thuth: Apply fix for compiling with GCC 11]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-12-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
