We allocate ram_size / PAGE_SIZE storage keys, so we need to make sure that
we only access that many. Unfortunately the code can overrun this array by
one, potentially overwriting unrelated memory.
Fix it by limiting storage keys to their scope.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The MVC instruction and the memmove C funtion do not have the same
semantic when memory areas overlap:
MVC: When the operands overlap, the result is obtained as if the
operands were processed one byte at a time and each result byte were
stored immediately after fetching the necessary operand byte.
memmove: Copying takes place as though the bytes in src are first copied
into a temporary array that does not overlap src or dest, and the bytes
are then copied from the temporary array to dest.
The behaviour is therefore the same when the destination is at a lower
address than the source, but not in the other case. This is actually a
trick for propagating a value to an area. While the current code detects
that and call memset in that case, it only does for 1-byte value. This
trick can and is used for propagating two or more bytes to an area.
In the softmmu case, the call to mvc_fast_memmove is correct as the
above tests verify that source and destination are each within a page,
and both in a different page. The part doing the move 8 bytes by 8 bytes
is wrong and we need to check that if the source and destination
overlap, they do with a distance of minimum 8 bytes before copying 8
bytes at a time.
In the user code, we should check check that the destination is at a
lower address than source or than the end of the source is at a lower
address than the destination before calling memmove. In the opposite
case we fallback to the same code as the softmmu one. Note that l
represents (length - 1).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
mvcp and mvcs helper get access to the physical memory by a call to
mmu_translate for the virtual to real conversion and then using ldb_phys
and stb_phys to physically access the data. In practice this is quite
slow because it bypasses the QEMU softmmu TLB and because stb_phys calls
try to invalidate the corresponding memory for each access.
Instead use cpu_ldb_{primary,secondary} for the loads and
cpu_stb_{primary,secondary} for the stores. Ideally this should be
further optimized by a call to memcpy, but that already improves the
boot time of a guest by a factor 1.8.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
s390_cpu_handle_mmu_fault currently looks at the current ASC mode
defined in PSW mask instead of the MMU index. This prevent emulating
easily instructions using a specific ASC mode. Fix that by using the
MMU index converted back to ASC using the just added cpu_mmu_idx_to_asc
function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use constants to define the MMU indexes, and add a function to do
the reverse conversion of cpu_mmu_index.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Besides RISBHG and RISBLG, all high-word instructions are not
implemented. Fix that.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the same time move the trap code from op_ct into gen_trap and use it
for all new functions. The value needs to be stored back to register
before the exception, but also before the brcond (as we don't use
temp locals). That's why we can't use wout helper.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
RISBGN is the same as RISBG, but without setting the condition code.
CLT and CLGT are the same as CLRT and CLGRT, but using memory for the
second operand.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This complete the floating point support sign handling facility.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
It is part of the basic zArchitecture instructions.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
It is part of the basic zArchitecture instructions. Allow it to be call
from EXECUTE.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is needed to pass the gcc.c-torture/execute/ieee/20010114-2.c test
in the gcc testsuite.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
It belongs to the DFP rounding facility.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
STORE CLOCK FAST should be in the SCF facility.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Change to match the PoP. In practice both format RIL-a and RIL-b have
the same fields. They differ on the way we decode the fields, and it's
done correctly in QEMU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The COMPARE LOGICAL IMMEDIATE AND TRAP instruction should compare the
numbers as unsigned, as its name implies.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
When an operation code is not recognized (ie invalid instruction) an
operation exception should be generated instead of a specification
exception. The latter is for valid opcode, with invalid operands or
modifiers.
This give a very basic GDB support in the guest, as it uses the invalid
opcode 0x0001 to generate a trap.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This complete the general-instructions-extension facility, enable it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove facility bit]
Signed-off-by: Alexander Graf <agraf@suse.de>
LY is part of the long-displacement facility.
RISBHG and RISBLG are part of the high-word facility.
STCMH is part of the z/Architecture.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The s390x floating point unit detects tininess before rounding, so set
the softfloat fp_status up appropriately.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
LOAD LENGTHENED and LOAD ROUNDED are considered as FP operations and
thus need to convert input sNaN into corresponding qNaN.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The cpu_mmu_index function wrongly looks at PSW P bit to determine the
MMU index, while this bit actually only control the use of priviledge
instructions. The addressing mode is detected by looking at the PSW ASC
bits instead.
This used to work more or less correctly up to kernel 3.6 as the kernel
was running in primary space and userland in secondary space. Since
kernel 3.7 the default is to run the kernel in home space and userland
in primary space. While the current QEMU code seems to work it open some
security issues, like accessing the lowcore memory in R/W mode from a
userspace process once it has been accessed by the kernel (it is then
cached by the QEMU TLB).
At the same time change the MMU_USER_IDX value so that it matches the
value used in recent kernels.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
runtime_exception computes the psw.addr value using the actual exception
address and the instruction length computed by calling the get_ilen
function. However as explained above the get_ilen code, it returns the
actual instruction length, and not the ILC. Therefore there is no need to
multiply the value by 2.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
When consecutive memory locations are on page boundary a page fault
might occur when using the LOAD MULTIPLE instruction. In that case real
hardware doesn't load any register.
This is an important detail in case the base register is in the list
of registers to be loaded. If a page fault occurs this register might be
overwritten and when the instruction is later restarted the wrong
base register value is useD.
Fix this by first loading the first and last value from memory, hence
triggering all possible page faults, and then the remaining registers.
This fixes random segmentation faults seen in the guest.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Save the timer target value in the SPT helper, so that the STPT helper
can compute the remaining time.
This allow the Linux kernel to correctly do time accounting.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The STCKC instruction just returns the last written clock comparator
value and KVM already provides the corresponding variable.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that clock_value is only used in one place, we can inline it in
the STCK helper.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The clock comparator and the QEMU timer work the same way, triggering
at a given time, they just differ by the origin and the scale. It is
therefore possible to go from one to another without using the current
clock value. This spares two calls to qemu_clock_get_ns, which probably
return slightly different values, possibly reducing the accuracy.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a tod2time function similar to the time2tod one, instead of open
coding the conversion.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that movcond exists, it's easy to write (negative-) absolute value
using TCG code instead of an helper.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
LOAD POSITIVE instructions (LPR, LPGR and LPGFR) set the following
condition code:
0: Result zero; no overflow
1: --
2: Result greater than zero; no overflow
3: Overflow
The current code wrongly returns 1 instead of 2 in case of a result
greater than 0. This patches fixes that. This fixes the marshalling of
the value '0L' in Python.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit 7a6c7067f optimized CC computation by only saving cc_op before
calling helpers as they either don't touch the CC or generate a new
static value. This however doesn't work for the EX instruction as the
helper changes or not the CC value depending on the actual executed
instruction (e.g. MVC vs CLC).
This patches force a CC computation before calling the helper. This
fixes random memory corruption occuring in guests.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove set_cc_static in op_ex as suggested by rth]
Signed-off-by: Alexander Graf <agraf@suse.de>
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI)
ID. This latter equals to the SPI index + 32. to retrieve the SPI index,
matching the gsi, an architecture specific function is introduced.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everything is finally in place, inform the kernel that user space
supports vector registers.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When migrating a guest, be sure to include the vector registers.
The vector registers are defined in a subsection, similar to the
existing subsection for floating point registers. Since the
floating point registers are always present (and thus migrated),
we can skip them when performing the migration of the vector
registers which may or may not be present.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Create ELF notes for the vector registers where applicable, so that
their contents can be examined by utilities such as crash or readelf.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
There are mechanisms to dump registers via the qemu HMP interface,
such as the "info registers" command. Expand this output to dump
the new vector registers.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
gdb allows registers to be displayed/modified, and is being updated
to account for the new vector registers. Mirror these changes in
the gdb stub in qemu so that this can be performed when gdb is
attached to the qemu gdbserver.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add handling for the Store Additional Status at Address order
that exists for the Signal Processor (SIGP) instruction.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Handle the actual syncing of the vector registers with kernel space,
via the get/put register IOCTLs.
The vector registers that were introduced with the z13 overlay
the existing floating point registers. FP registers 0-15 are
the high-halves of vector registers 0-15. Thus, remove the
freg fields and replace them with the equivalent vector field
to avoid errors in duplication. Moreover, synchronize either the
vector registers via kvm_sync_regs, or floating point registers
via the GET/SET FPU IOCTLs.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Provide a routine to access the correct floating point register,
to simplify future expansion.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We're currently missing all instructions defined by the "interlocked-access
facility 1" which is part of zEC12. This patch implements all of them except
for LPD and LPDG.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
I find it really hard to grasp what each field in the opcode list means.
Slowly walking through its semantics myself, I figured I'd write a small
summary at the top of the file to make life easier for me and whoever
looks at the file next.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The store conditional instruction wants to store when the condition
is fulfilled, so we should branch out when it's not true.
The code today branches out when the condition is true, clearly
reversing the logic. Fix it up by negating the condition.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVTLBhAAoJEL/70l94x66DkGIH/jlNJBMBGhlH/lwb1LzxtAMX
OxyDxsiwJpSxsOiZiY3oRz7d6VV6TCrmx5L+1HgG5IzU3WC61Tq6/FK4EXLepZIH
GSYlLtAALWny+2Uwsyh1Z7MMr5yxyhgeORk/l7O8pncmMeysludbEaJqQg8Aa9A2
j0B2pv4tvcl/qhuIFXL1YlbYMVXMsZy5W65D8jq+B6qf3q8kUcdKvgvbUMrxAiSH
JMISo4Z32t9w8SGnhlBa9s4HfN2yOvULRAozzkDBAu4c41cZrw16lvTV8XotamnU
LrG6eQ+2PFeIrcGhuIu7z5Bi4yiRRiThfRLCAvVApVTQYUf7IwvPNa5K1FrP9YU=
=Z/UD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- build bugfix from Fam and new configure check from Emilio
- two improvements to "info mtere" from Gerd
- KVM support for memory transaction attributes
- one more small step towards unlocked MMIO dispatch
- one piece of the qemu-nbd errno fixes
- trivial-ish patches from Denis and Thomas
# gpg: Signature made Fri May 8 13:47:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
qemu-nbd: only send a limited number of errno codes on the wire
rules.mak: Force CFLAGS for all objects in DSO
configure: require __thread support
exec: move rcu_read_lock/unlock to address_space_translate callers
kvm: add support for memory transaction attributes
mtree: also print disabled regions
mtree: tag & indent a bit better
apic_common: improve readability of apic_reset_common
kvm: Silence warning from valgrind
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support to migrate vcpu interrupts.
We use ioctl KVM_S390_GET_IRQ_STATE and _SET_IRQ_STATE
to get/set the complete interrupt state for a vcpu.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's move the floating point registers into a seperate subsection and
bump up the version id. This cleans up the current vmstate and will
allow for a future extension with vector registers in a compatible way.
This patch is based on a patch from Eric Farman.
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
KVM_S390_INT uses only two parameter fields. This is not
enough to pass all required information for certain interrupts.
A new ioctl KVM_S390_IRQ is available which allows us to
inject all local interrupts as defined in the Principles of
Operation. It takes a struct kvm_s390_irq as a parameter
which can store interrupt payload data for all interrupts.
Let's use the new ioctl for injecting vcpu interrupts.
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs.
These are then passed to address_space_rw.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
