Commit Graph

29 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé fda43b1204 hw/net/e1000e: Do not abort() on invalid PSRCTL register value
libFuzzer found using 'qemu-system-i386 -M q35':

qemu: hardware error: e1000e: PSRCTL.BSIZE0 cannot be zero
CPU #0:
EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000663
ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 0000ffff 00009300
CS =f000 ffff0000 0000ffff 00009b00
SS =0000 00000000 0000ffff 00009300
DS =0000 00000000 0000ffff 00009300
FS =0000 00000000 0000ffff 00009300
GS =0000 00000000 0000ffff 00009300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT=     00000000 0000ffff
IDT=     00000000 0000ffff
CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
EFER=0000000000000000
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
==1988== ERROR: libFuzzer: deadly signal
    #6 0x7fae4d3ea894 in __GI_abort (/lib64/libc.so.6+0x22894)
    #7 0x563f4cc59a1d in hw_error (qemu-fuzz-i386+0xe8ca1d)
    #8 0x563f4d7c93f2 in e1000e_set_psrctl (qemu-fuzz-i386+0x19fc3f2)
    #9 0x563f4d7b798f in e1000e_core_write (qemu-fuzz-i386+0x19ea98f)
    #10 0x563f4d7afc46 in e1000e_mmio_write (qemu-fuzz-i386+0x19e2c46)
    #11 0x563f4cc9a0a7 in memory_region_write_accessor (qemu-fuzz-i386+0xecd0a7)
    #12 0x563f4cc99c13 in access_with_adjusted_size (qemu-fuzz-i386+0xeccc13)
    #13 0x563f4cc987b4 in memory_region_dispatch_write (qemu-fuzz-i386+0xecb7b4)

It simply sent the following 2 I/O command to the e1000e
PCI BAR #2 I/O region:

  writew 0x0100 0x0c00 # RCTL =   E1000_RCTL_DTYP_MASK
  writeb 0x2170 0x00   # PSRCTL = 0

2813 static void
2814 e1000e_set_psrctl(E1000ECore *core, int index, uint32_t val)
2815 {
2816     if (core->mac[RCTL] & E1000_RCTL_DTYP_MASK) {
2817
2818         if ((val & E1000_PSRCTL_BSIZE0_MASK) == 0) {
2819             hw_error("e1000e: PSRCTL.BSIZE0 cannot be zero");
2820         }

Instead of calling hw_error() which abort the process (it is
meant for CPU fatal error condition, not for device logging),
log the invalid request with qemu_log_mask(LOG_GUEST_ERROR)
and return, ignoring the request.

Cc: qemu-stable@nongnu.org
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-18 21:05:52 +08:00
Philippe Mathieu-Daudé 205ce5670f hw/net/e1000e_core: Let e1000e_can_receive() return a boolean
The e1000e_can_receive() function simply returns a boolean value.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-31 21:14:35 +08:00
Philippe Mathieu-Daudé da5cf9a4fe hw/net/e1000: Move macreg[] arrays to .rodata to save 1MiB of .data
Each array consumes 256KiB of .data. As we do not reassign entries,
we can move it to the .rodata section, and save a total of 1MiB of
.data (size reported on x86_64 host).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200305010446.17029-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09 15:59:31 +01:00
Philippe Mathieu-Daudé 3b6b3a279a hw/net/e1000: Add readops/writeops typedefs
Express the macreg[] arrays using typedefs.
No logical changes introduced here.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200305010446.17029-2-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09 15:59:31 +01:00
Yuri Benditovich 2683a927ff NetRxPkt: fix hash calculation of IPV6 TCP
When requested to calculate the hash for TCPV6 packet,
ignore overrides of source and destination addresses
in in extension headers.
Use these overrides when new hash type NetPktRssIpV6TcpEx
requested.
Use this type in e1000e hash calculation for IPv6 TCP, which
should take in account overrides of the addresses.

Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03 18:04:47 +08:00
Yuri Benditovich b559ea95ea e1000e: Avoid hw_error if legacy mode used
https://bugzilla.redhat.com/show_bug.cgi?id=1787142
The emulation issues hw_error if PSRCTL register
is written, for example, with zero value.
Such configuration does not present any problem when
DTYP bits of RCTL register define legacy format of
transfer descriptors. Current commit discards check
for BSIZE0 and BSIZE1 when legacy mode used.

Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-03-03 18:04:47 +08:00
Markus Armbruster 54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster 650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Jan Kiszka 4712c158c5 e1000e: Prevent MSI/MSI-X storms
Only signal MSI/MSI-X events on rising edges. So far we re-triggered the
interrupt sources even if the guest did no consumed the pending one,
easily causing interrupt storms.

Issue was observable with Linux 4.16 e1000e driver when MSI-X was used.
Vector 2 was causing interrupt storms after the driver activated the
device.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-07-20 08:30:48 +08:00
Jan Kiszka 2285a00c11 e1000e: Do not auto-clear ICR bits which aren't set in EIAC
The spec does not justify clearing of any E1000_ICR_OTHER_CAUSES when
E1000_ICR_OTHER is set in EIAC. In fact, removing this code fixes the
issue the Linux driver runs into since 4aea7a5c5e94 ("e1000e: Avoid
receiver overrun interrupt bursts") and was worked around by
745d0bd3af99 ("e1000e: Remove Other from EIAC").

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-06-15 10:39:53 +08:00
Ed Swierk via Qemu-devel 7d08c73e7b e1000, e1000e: Move per-packet TX offload flags out of context state
sum_needed and cptse flags are received from the guest within each
transmit data descriptor. They are not part of the offload context;
instead, they determine how to apply a previously received context to
the packet being transmitted:

- If cptse is set, perform both segmentation and checksum offload
  using the parameters in the TSO context; otherwise just do checksum
  offload. (Currently the e1000 device incorrectly stores only one
  context, which will be fixed in a subsequent patch.)

- Depending on the bits set in sum_needed, possibly perform L4
  checksum offload and/or IP checksum offload, using the parameters in
  the appropriate context.

Move these flags out of struct e1000x_txd_props, which is otherwise
dedicated to storing values from a context descriptor, and into the
per-packet TX struct.

Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22 09:53:23 +08:00
Kamil Rytarowski 757704f1b7 e1000: Rename the SEC symbol to SEQEC
SunOS defines SEC in <sys/time.h> as 1 (commonly used time symbols).

This fixes build on SmartOS (Joyent).

Patch cherry-picked from pkgsrc by jperkin (Joyent).

Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08 08:17:37 +08:00
Sameeh Jubran 82342e91b6 e1000e: Fix ICR "Other" causes clear logic
This commit fixes a bug which causes the guest to hang. The bug was
observed upon a "receive overrun" (bit #6 of the ICR register)
interrupt which could be triggered post migration in a heavy traffic
environment. Even though the "receive overrun" bit (#6) is masked out
by the IMS register (refer to the log below) the driver still receives
an interrupt as the "receive overrun" bit (#6) causes the "Other" -
bit #24 of the ICR register - bit to be set as documented below. The
driver handles the interrupt and clears the "Other" bit (#24) but
doesn't clear the "receive overrun" bit (#6) which leads to an
infinite loop. Apparently the Windows driver expects that the "receive
overrun" bit and other ones - documented below - to be cleared when
the "Other" bit (#24) is cleared.

So to sum that up:
1. Bit #6 of the ICR register is set by heavy traffic
2. As a results of setting bit #6, bit #24 is set
3. The driver receives an interrupt for bit 24 (it doesn't receieve an
   interrupt for bit #6 as it is masked out by IMS)
4. The driver handles and clears the interrupt of bit #24
5. Bit #6 is still set.
6. 2 happens all over again

The Interrupt Cause Read - ICR register:

The ICR has the "Other" bit - bit #24 - that is set when one or more
of the following ICR register's bits are set:

LSC - bit #2, RXO - bit #6, MDAC - bit #9, SRPD - bit #16, ACK - bit
#17, MNG - bit #18

This bug can occur with any of these bits depending on the driver's
behaviour and the way it configures the device. However, trying to
reproduce it with any bit other than RX0 is challenging and came to
failure as the drivers don't implement most of these bits, trying to
reproduce it with LSC (Link Status Change - bit #2) bit didn't succeed
too as it seems that Windows handles this bit differently.

Log sample of the storm:

27563@1494850819.411877:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004)
27563@1494850819.411900:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.411915:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412380:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412395:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412436:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412441:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412998:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004)

* This bug behaviour wasn't observed with the Linux driver.

This commit solves:
https://bugzilla.redhat.com/show_bug.cgi?id=1447935
https://bugzilla.redhat.com/show_bug.cgi?id=1449490

Cc: qemu-stable@nongnu.org
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23 10:10:38 +08:00
Li Qiang 4154c7e03f net: e1000e: fix an infinite loop issue
This issue is like the issue in e1000 network card addressed in
this commit:
e1000: eliminate infinite loops on out-of-bounds transfer start.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-02-15 11:18:57 +08:00
Paolo Bonzini e514fc7e12 net: e1000e: fix dead code in e1000e_write_packet_to_guest
Because is_first is declared inside a loop, it is always true.  The store
is dead, and so is the "else" branch of "if (is_first)".  is_last is
okay though.

Reported by Coverity.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-02-15 11:18:57 +08:00
Kevin Wolf c89d416a2b e1000e: Don't zero out buffer address in rx descriptor
The e1000e emulation zeroes out any used rx descriptor and then writes a
completely newly constructed value there. By doing this, it doesn't only
update the write-back area of the descriptors (as it's supposed to do),
but it also clears the buffer address, which real hardware doesn't do.

The spec explicitly mentions in chapter 7.1.8 that it is valid for a
driver to reuse a descriptor and only update the status field while
doing so, i.e. reusing the old buffer address:

    If software statically allocates buffers, and uses memory read to
    check for completed descriptors, it simply has to zero the status
    byte in the descriptor to make it ready for reuse by hardware.

This patch fixes the behaviour to leave the buffer address in
descriptors unchanged even after the descriptor has been used.

Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Dmitry Fleytman b38636b837 e1000e: Fix EIAC register implementation
This patch fixes 2 issues:

1. Bits set in EIAC register should be cleared
   from IMS when EIAM is not used.
2. Only bit that corresonds to the interrupt being
   raised should be cleared.

See spec. 10.2.4.7 Interrupt Auto Clear

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman 4100c026b6 e1000e: Fix spurious RX TCP ACK interrupts
Do not raise ACK interrupts when
RFCTL.ACKDIS bit is set (see spec. 10.2.5.16).

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman 8b54c6e187 e1000e: Fix OTHER interrupts processing for MSI-X
Interrupt mask for legacy OTHER causes should
not apply to MSI-X OTHER cause.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman 680e60b6ba e1000e: Fix PBACLR implementation
This patch fixes incorrect check for
interrypt type being used.

PBSCLR register is valid for MSI-X only.

See spec. 10.2.3.13 MSI—X PBA Clear

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman 2d803144a6 e1000e: Fix CTRL_EXT.EIAME behavior
CTRL_EXT.EIAME bit controls clearing of IAM bits,
but current code clears IMS bits instead.

See spec. 10.2.2.5 Extended Device Control Register.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman 40364748dd e1000e: Flush receive queues on link up
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman 6ee0e20b65 e1000e: Flush all receive queues on receive enable
Before this patch first netdev queue only was flushed.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Gonglei fb56d323e2 e1000: fix buliding complaint
hw/net/e1000e_core.c:56: warning: e1000e_set_interrupt_cause declared inline after being called
hw/net/e1000e_core.c:56: warning: previous declaration of e1000e_set_interrupt_cause was here

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Changlong Xie eb83c2030a hw/net/e1000e: Fix compiler warning
slave:~/.xie/qemu-colo # gcc --version
gcc (SUSE Linux) 4.3.4 [gcc-4_3-branch revision 152973]

slave:~/.xie/qemu-colo # make -j8
CC    hw/net/e1000e_core.o
hw/net/e1000e_core.c:56: warning: ‘e1000e_set_interrupt_cause’ declared inline after being called
hw/net/e1000e_core.c:56: warning: previous declaration of ‘e1000e_set_interrupt_cause’ was here
LINK  x86_64-softmmu/qemu-system-x86_64

Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-13 18:12:34 +03:00
Paolo Bonzini 1ac6c07f42 e1000e: fix incorrect access to pointer
This is not dereferencing the pointer, and instead checking only
the value of the pointer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-18 16:16:20 +08:00
Peter Maydell 14e60aaece hw/net/e1000: Don't use *_to_cpup()
Don't use *_to_cpup() to do byte-swapped loads; instead use
ld*_p() which correctly handle misaligned accesses.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com <mailto:dmitry@daynix.com>>
Message-id: 1466097446-981-6-git-send-email-peter.maydell@linaro.org
2016-06-27 16:39:56 +01:00
Dmitry Fleytman defbaec160 e1000e: Fix build with ust trace backend
ust trace backend has limitation of maximum 10
arguments per event. Traces with more arguments
cannot be compiled for this backend.

Trace e1000e_rx_rss_ip6 introduced by previous
commits has 11 arguments and fails to compile with
ust trace backend.

This patch fixes the problem by splitting this
tracepoint into two successive tracepoints with
smaller number of arguments.

For more information see comment regarding TP_ARGS
in lttng/tracepoint.h:

/*
* TP_ARGS takes tuples of type, argument separated by a comma.
* It can take up to 10 tuples (which means that less than 10 tuples is
* fine too).
* Each tuple is also separated by a comma.
*/

Build log generated by this problem:

In file included from ./trace/generated-tracers.h:9:0,
                 from /home/travis/build/qemu/qemu/include/trace.h:4,
                 from util/oslib-posix.c:36:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
                 from util/oslib-posix.c:36:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/oslib-posix.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from ./trace/generated-tracers.h:9:0,
                 from /home/travis/build/qemu/qemu/include/trace.h:4,
                 from util/hbitmap.c:16:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
                 from util/hbitmap.c:16:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/hbitmap.o] Error 1

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Message-id: 1464894748-27803-1-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-03 11:06:09 +01:00
Dmitry Fleytman 6f3fbe4ed0 net: Introduce e1000e device emulation
This patch introduces emulation for the Intel 82574 adapter, AKA e1000e.

This implementation is derived from the e1000 emulation code, and
utilizes the TX/RX packet abstractions that were initially developed for
the vmxnet3 device. Although some parts of the introduced code may be
shared with e1000, the differences are substantial enough so that the
only shared resources for the two devices are the definitions in
hw/net/e1000_regs.h.

Similarly to vmxnet3, the new device uses virtio headers for task
offloads (for backends that support virtio extensions). Usage of
virtio headers may be forcibly disabled via a boolean device property
"vnet" (which is enabled by default). In such case task offloads
will be performed in software, in the same way it is done on
backends that do not support virtio headers.

The device code is split into two parts:

  1. hw/net/e1000e.c: QEMU-specific code for a network device;
  2. hw/net/e1000e_core.[hc]: Device emulation according to the spec.

The new device name is e1000e.

Intel specifications for the 82574 controller are available at:
http://www.intel.com/content/dam/doc/datasheet/82574l-gbe-controller-datasheet.pdf

Throughput measurement results (iperf2):

                Fedora 22 guest, TCP, RX
    4 ++------------------------------------------+
      |                                           |
      |                           X   X   X   X   X
  3.5 ++          X   X   X   X                   |
      |       X                                   |
      |                                           |
    3 ++                                          |
G     |   X                                       |
b     |                                           |
/ 2.5 ++                                          |
s     |                                           |
      |                                           |
    2 ++                                          |
      |                                           |
      |                                           |
  1.5 X+                                          |
      |                                           |
      +   +   +   +   +   +   +   +   +   +   +   +
    1 ++--+---+---+---+---+---+---+---+---+---+---+
     32  64  128 256 512  1   2   4   8  16  32  64
      B   B   B   B   B   KB  KB  KB  KB KB  KB  KB
                       Buffer size

               Fedora 22 guest, TCP, TX
  18 ++-------------------------------------------+
     |                        X                   |
  16 ++                           X   X   X   X   X
     |                   X                        |
  14 ++                                           |
     |                                            |
  12 ++                                           |
G    |               X                            |
b 10 ++                                           |
/    |                                            |
s  8 ++                                           |
     |                                            |
   6 ++          X                                |
     |                                            |
   4 ++                                           |
     |       X                                    |
   2 ++  X                                        |
     X   +   +   +   +   +    +   +   +   +   +   +
   0 ++--+---+---+---+---+----+---+---+---+---+---+
    32  64  128 256 512  1    2   4   8  16  32  64
     B   B   B   B   B   KB   KB  KB  KB KB  KB  KB
                       Buffer size

                Fedora 22 guest, UDP, RX
    3 ++------------------------------------------+
      |                                           X
      |                                           |
  2.5 ++                                          |
      |                                           |
      |                                           |
    2 ++                                 X        |
G     |                                           |
b     |                                           |
/ 1.5 ++                                          |
s     |                         X                 |
      |                                           |
    1 ++                                          |
      |                                           |
      |                 X                         |
  0.5 ++                                          |
      |        X                                  |
      X        +        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

                Fedora 22 guest, UDP, TX
    1 ++------------------------------------------+
      |                                           X
  0.9 ++                                          |
      |                                           |
  0.8 ++                                          |
  0.7 ++                                          |
      |                                           |
G 0.6 ++                                          |
b     |                                           |
/ 0.5 ++                                          |
s     |                                  X        |
  0.4 ++                                          |
      |                                           |
  0.3 ++                                          |
  0.2 ++                        X                 |
      |                                           |
  0.1 ++                X                         |
      X        X        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

              Windows 2012R2 guest, TCP, RX
  3.2 ++------------------------------------------+
      |                                   X       |
    3 ++                                          |
      |                                           |
  2.8 ++                                          |
      |                                           |
  2.6 ++                              X           |
G     |   X                   X   X           X   X
b 2.4 ++      X       X                           |
/     |                                           |
s 2.2 ++                                          |
      |                                           |
    2 ++                                          |
      |           X       X                       |
  1.8 ++                                          |
      |                                           |
  1.6 X+                                          |
      +   +   +   +   +   +   +   +   +   +   +   +
  1.4 ++--+---+---+---+---+---+---+---+---+---+---+
     32  64  128 256 512  1   2   4   8  16  32  64
      B   B   B   B   B   KB  KB  KB  KB KB  KB  KB
                       Buffer size

             Windows 2012R2 guest, TCP, TX
  14 ++-------------------------------------------+
     |                                            |
     |                                        X   X
  12 ++                                           |
     |                                            |
  10 ++                                           |
     |                                            |
G    |                                            |
b  8 ++                                           |
/    |                                    X       |
s  6 ++                                           |
     |                                            |
     |                                            |
   4 ++                               X           |
     |                                            |
   2 ++                                           |
     |           X   X            X               |
     +   X   X   +   +   X    X   +   +   +   +   +
   0 X+--+---+---+---+---+----+---+---+---+---+---+
    32  64  128 256 512  1    2   4   8  16  32  64
     B   B   B   B   B   KB   KB  KB  KB KB  KB  KB
                       Buffer size

              Windows 2012R2 guest, UDP, RX
  1.6 ++------------------------------------------X
      |                                           |
  1.4 ++                                          |
      |                                           |
  1.2 ++                                          |
      |                                  X        |
      |                                           |
G   1 ++                                          |
b     |                                           |
/ 0.8 ++                                          |
s     |                                           |
  0.6 ++                        X                 |
      |                                           |
  0.4 ++                                          |
      |                 X                         |
      |                                           |
  0.2 ++       X                                  |
      X        +        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

              Windows 2012R2 guest, UDP, TX
  0.6 ++------------------------------------------+
      |                                           X
      |                                           |
  0.5 ++                                          |
      |                                           |
      |                                           |
  0.4 ++                                          |
G     |                                           |
b     |                                           |
/ 0.3 ++                                 X        |
s     |                                           |
      |                                           |
  0.2 ++                                          |
      |                                           |
      |                         X                 |
  0.1 ++                                          |
      |                 X                         |
      X        X        +       +        +        +
    0 ++-------+--------+-------+--------+--------+
     32       64       128     256      512       1
      B        B         B       B        B      KB
                       Datagram size

Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-06-02 10:42:29 +08:00