DIAG IPL is already implemented for KVM, but not wired from TCG. For
that change the format of the instruction so that we can get R1 and R3
numbers in addition to the function code.
The diag function can change plenty of things, including CC, so we
should enter with a static CC. Also it doesn't set the value of general
register 2 to 0 as in the current code. We also need to exit the CPU
loop after a reset, which means a new PSW.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The s390_cpu_initial_reset function zeroes a big part of the CPU state
structure, including CPU_COMMON, and thus the QEMU TLB structure. As
they should not be initialized with zeroes only, we need to call the
tlb_flush to initialize it correctly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
env->io_index[] should be set to -1 during CPU reset to mark the
I/O interrupt queue as empty.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
env->ext_index should be initialized to -1 to mark the external
interrupt queue as emtpy. This should not be done in s390_cpu_initfn
as all the interrupt fields are later reset to 0 by the memset in
s390_cpu_initial_reset or s390_cpu_full_reset. Move the initialization
there.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
In TCG mode we should store the CC value in env->cc_op. However do it
inconditionnaly because:
- the tcg_enabled function is not inlined
- it's probably faster to always store the value, especially given it
is likely in the same cache line than env->psw.mask.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This remove the corresponding error messages in TCG mode, and allow to
simplify the s390_assign_subch_ioeventfd() function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The ioinst_schib_valid gets a SCHIB in guest endianness, we should
byteswap the fields we access.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The I/O-Interruption Subclass field corresponds to bits 2 to 5 (BE
notation) of the Interruption-Identification Word. The value should
be shift by 27 instead of 24.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
Intercept the diag288 requests from kvm guests, and hand the
requested command to the diag288 watchdog device for further
handling.
Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
commit 46c804def4 ("s390x: move fpu regs into a subsection
of the vmstate") moved the fprs into a subsection and bumped
the version number. This will allow to not transfer fprs in
the future if necessary. Add a comment to mark the return true
as intentional.
CC: Juan Quintela <quintela@redhat.com>
CC: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1433758884-2997-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
We allocate ram_size / PAGE_SIZE storage keys, so we need to make sure that
we only access that many. Unfortunately the code can overrun this array by
one, potentially overwriting unrelated memory.
Fix it by limiting storage keys to their scope.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The MVC instruction and the memmove C funtion do not have the same
semantic when memory areas overlap:
MVC: When the operands overlap, the result is obtained as if the
operands were processed one byte at a time and each result byte were
stored immediately after fetching the necessary operand byte.
memmove: Copying takes place as though the bytes in src are first copied
into a temporary array that does not overlap src or dest, and the bytes
are then copied from the temporary array to dest.
The behaviour is therefore the same when the destination is at a lower
address than the source, but not in the other case. This is actually a
trick for propagating a value to an area. While the current code detects
that and call memset in that case, it only does for 1-byte value. This
trick can and is used for propagating two or more bytes to an area.
In the softmmu case, the call to mvc_fast_memmove is correct as the
above tests verify that source and destination are each within a page,
and both in a different page. The part doing the move 8 bytes by 8 bytes
is wrong and we need to check that if the source and destination
overlap, they do with a distance of minimum 8 bytes before copying 8
bytes at a time.
In the user code, we should check check that the destination is at a
lower address than source or than the end of the source is at a lower
address than the destination before calling memmove. In the opposite
case we fallback to the same code as the softmmu one. Note that l
represents (length - 1).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
mvcp and mvcs helper get access to the physical memory by a call to
mmu_translate for the virtual to real conversion and then using ldb_phys
and stb_phys to physically access the data. In practice this is quite
slow because it bypasses the QEMU softmmu TLB and because stb_phys calls
try to invalidate the corresponding memory for each access.
Instead use cpu_ldb_{primary,secondary} for the loads and
cpu_stb_{primary,secondary} for the stores. Ideally this should be
further optimized by a call to memcpy, but that already improves the
boot time of a guest by a factor 1.8.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
s390_cpu_handle_mmu_fault currently looks at the current ASC mode
defined in PSW mask instead of the MMU index. This prevent emulating
easily instructions using a specific ASC mode. Fix that by using the
MMU index converted back to ASC using the just added cpu_mmu_idx_to_asc
function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Use constants to define the MMU indexes, and add a function to do
the reverse conversion of cpu_mmu_index.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Besides RISBHG and RISBLG, all high-word instructions are not
implemented. Fix that.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
At the same time move the trap code from op_ct into gen_trap and use it
for all new functions. The value needs to be stored back to register
before the exception, but also before the brcond (as we don't use
temp locals). That's why we can't use wout helper.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
RISBGN is the same as RISBG, but without setting the condition code.
CLT and CLGT are the same as CLRT and CLGRT, but using memory for the
second operand.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This complete the floating point support sign handling facility.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
It is part of the basic zArchitecture instructions.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
It is part of the basic zArchitecture instructions. Allow it to be call
from EXECUTE.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is needed to pass the gcc.c-torture/execute/ieee/20010114-2.c test
in the gcc testsuite.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
It belongs to the DFP rounding facility.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
STORE CLOCK FAST should be in the SCF facility.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Change to match the PoP. In practice both format RIL-a and RIL-b have
the same fields. They differ on the way we decode the fields, and it's
done correctly in QEMU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The COMPARE LOGICAL IMMEDIATE AND TRAP instruction should compare the
numbers as unsigned, as its name implies.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
When an operation code is not recognized (ie invalid instruction) an
operation exception should be generated instead of a specification
exception. The latter is for valid opcode, with invalid operands or
modifiers.
This give a very basic GDB support in the guest, as it uses the invalid
opcode 0x0001 to generate a trap.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This complete the general-instructions-extension facility, enable it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove facility bit]
Signed-off-by: Alexander Graf <agraf@suse.de>
LY is part of the long-displacement facility.
RISBHG and RISBLG are part of the high-word facility.
STCMH is part of the z/Architecture.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The s390x floating point unit detects tininess before rounding, so set
the softfloat fp_status up appropriately.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
LOAD LENGTHENED and LOAD ROUNDED are considered as FP operations and
thus need to convert input sNaN into corresponding qNaN.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The cpu_mmu_index function wrongly looks at PSW P bit to determine the
MMU index, while this bit actually only control the use of priviledge
instructions. The addressing mode is detected by looking at the PSW ASC
bits instead.
This used to work more or less correctly up to kernel 3.6 as the kernel
was running in primary space and userland in secondary space. Since
kernel 3.7 the default is to run the kernel in home space and userland
in primary space. While the current QEMU code seems to work it open some
security issues, like accessing the lowcore memory in R/W mode from a
userspace process once it has been accessed by the kernel (it is then
cached by the QEMU TLB).
At the same time change the MMU_USER_IDX value so that it matches the
value used in recent kernels.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
runtime_exception computes the psw.addr value using the actual exception
address and the instruction length computed by calling the get_ilen
function. However as explained above the get_ilen code, it returns the
actual instruction length, and not the ILC. Therefore there is no need to
multiply the value by 2.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
When consecutive memory locations are on page boundary a page fault
might occur when using the LOAD MULTIPLE instruction. In that case real
hardware doesn't load any register.
This is an important detail in case the base register is in the list
of registers to be loaded. If a page fault occurs this register might be
overwritten and when the instruction is later restarted the wrong
base register value is useD.
Fix this by first loading the first and last value from memory, hence
triggering all possible page faults, and then the remaining registers.
This fixes random segmentation faults seen in the guest.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Save the timer target value in the SPT helper, so that the STPT helper
can compute the remaining time.
This allow the Linux kernel to correctly do time accounting.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The STCKC instruction just returns the last written clock comparator
value and KVM already provides the corresponding variable.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that clock_value is only used in one place, we can inline it in
the STCK helper.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The clock comparator and the QEMU timer work the same way, triggering
at a given time, they just differ by the origin and the scale. It is
therefore possible to go from one to another without using the current
clock value. This spares two calls to qemu_clock_get_ns, which probably
return slightly different values, possibly reducing the accuracy.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add a tod2time function similar to the time2tod one, instead of open
coding the conversion.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that movcond exists, it's easy to write (negative-) absolute value
using TCG code instead of an helper.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
LOAD POSITIVE instructions (LPR, LPGR and LPGFR) set the following
condition code:
0: Result zero; no overflow
1: --
2: Result greater than zero; no overflow
3: Overflow
The current code wrongly returns 1 instead of 2 in case of a result
greater than 0. This patches fixes that. This fixes the marshalling of
the value '0L' in Python.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Commit 7a6c7067f optimized CC computation by only saving cc_op before
calling helpers as they either don't touch the CC or generate a new
static value. This however doesn't work for the EX instruction as the
helper changes or not the CC value depending on the actual executed
instruction (e.g. MVC vs CLC).
This patches force a CC computation before calling the helper. This
fixes random memory corruption occuring in guests.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove set_cc_static in op_ex as suggested by rth]
Signed-off-by: Alexander Graf <agraf@suse.de>
kvm_s390_vcpu_interrupt_pre_save() and
kvm_s390_vcpu_interrupt_post_load() are essentially no-ops on hosts
without KVM_CAP_S390_IRQ_STATE. Move the capability check after the
check for saved IRQ state in kvm_s390_vcpu_interrupt_post_load() so that
migration between hosts without KVM_CAP_S390_IRQ_STATE (including save /
restore on the same host) continues to work.
Fixes: 3cda44f7ba ("s390x/kvm: migrate vcpu interrupt state")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI)
ID. This latter equals to the SPI index + 32. to retrieve the SPI index,
matching the gsi, an architecture specific function is introduced.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Everything is finally in place, inform the kernel that user space
supports vector registers.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Aurelien Jarno