Use the new middle mode within the existing QMP server.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Remove the 'tarbin' target -- it isn't used as part of the official
QEMU release process, and it's out of date (various new bios files
were never added to its list of files). It's better not to provide
it at all than to have a broken makefile target we never use or test.
(Creating a tarball by just pulling in binaries that have been installed
directly to the system you're running the build on is a bad idea anyway:
the better way to create a binary tarball would be just to install to
a temporary DESTDIR and then tar up that.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
make -C mybuilddir no longer works (regression caused by commit)
388d475815.
PWD is the directory of the caller (not mybuilddir),
so BUILD_DIR is set to the wrong value.
GNU make sets CURDIR to the correct value.
Use this macro instead of PWD.
Cc: Lluís Vilanova <vilanova@ac.upc.edu>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This has been discussed before in the past. The special casing really makes no
sense anymore. This seems like a good change to make for 1.0.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch tries to cull any uneeded library dependencies from the guest
agent to improve portability across various distros. We do so by being
as explicit as possible about in-tree dependencies rather than relying
on existing *-obj-y targets, and by manually setting LIBS for the
qemu-ga target to avoid pulling in LIBS_TOOLS libraries discovered by
configure.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Distclean should remove anything created by the configure script.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
To run automated tests for coroutines:
make test-coroutine
./test-coroutine
On success the program terminates with exit status 0. On failure an
error message is written to stderr and the program exits with exit
status 1.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This fixes a build issue with make -j6+ due to qapi-generated files
being built before $(GENERATED_HEADERS) have been created.
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Create cscope symbols for assembly files in addition to .c/.h files.
Create cscope database with full path instead of relative path so cscope
can be used with CSCOPE_DB in any directory.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add configure check for python, exit if not found. Add switches
for specifying the path to python, use the path in Makefile.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is the actual guest daemon, it listens for requests over a
virtio-serial/isa-serial/unix socket channel and routes them through
to dispatch routines, and writes the results back to the channel in
a manner similar to QMP.
A shorthand invocation:
qemu-ga -d
Is equivalent to:
qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
-f /var/run/qemu-ga.pid -d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
GLib is an extremely common library that has a portable thread implementation
along with tons of other goodies.
GLib and GObject have a fantastic amount of infrastructure we can leverage in
QEMU including an object oriented programming infrastructure.
Short term, it has a very nice thread pool implementation that we could leverage
in something like virtio-9p. It also has a test harness implementation that
this series will use.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
No flag to configure is required. Instead, added a libcacard.la target that
is not built by default, only when requested explicitly via:
mkdir build
cd build
../configure
make libcacard.la
make install-libcacard
Uses libtool to do actual linking of object files and shared library, and
installing. Tested only under linux, but supposed to work on other systems as
well.
If libtool isn't found you get a message complaining about that, only at build
time (since it is not a default target I did not add a message at configure
time).
New build artifacts:
.libs subdirectories (at <buildroot> and <buildroot>/libcacard)
*.lo files (at same locations as the respective o files)
Added %.lo : %.c rule that uses libtool.
Updated clean rule to clean up those artifacts.
Added specific rule to call dtrace with libtool wrapper (note that because of
a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag
isn't actually passed on. still current dtrace+libtool produced object links fine).
If libtool is missing any of the following targets will complain and exit 1:
any subdir: *.lo
root and libcacard: libcacard.la, libcacard-instsall
Tested to link and load with all tracing backends.
We don't install mpc8544ds.dtb, which means that -M mpc8544ds doesn't
work when installed. Fix it by installing the file.
Signed-off-by: Alexander Graf <agraf@suse.de>
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v24->v25:
* Fix out of tree builds.
* Fix build with linux-user targets.
changes from v23->v24: (Jes Sorensen review 2)
* Makefile.target: use obj-$(CONFIG_*) +=
* remove unrequired includes, include qemu-common before qemu-thread
* required adding #define NO_NSPR_10_SUPPORT (harmless)
changes from v22->v23:
* configure fixes: (reported by Stefan Hajnoczi)
* test a = b, not a == b (second isn't portable)
* quote $source_path in case it contains spaces
- this doesn't really help since there are many other places
that need similar fixes, not introduced by this patch.
changes from v21->v22:
* fix configure to not link libcacard if nss not found
(reported by Stefan Hajnoczi)
* fix vscclient linkage with simpletrace backend
(reported by Stefan Hajnoczi)
* card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
(reported by William van de Velde)
changes from v20->v21: (Jes Sorensen review)
* use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
and qemu_free), error_report
* assert instead of ASSERT
* cosmetic fixes
* use strpbrk and isspace
* add --disable-nss --enable-nss here, instead of in the final patch.
* split vscclient, passthru and docs to following patches.
changes from v19->v20:
* checkpatch.pl
changes from v15->v16:
Build:
* don't erase self with distclean
* fix make clean after make distclean
* Makefile: make vscclient link quiet
Behavioral:
* vcard_emul_nss: load coolkey in more situations
* vscclient:
* use hton,ntoh
* send init on connect, only start vevent thread on response
* read payload after header check, before type switch
* remove Reconnect
* update for vscard_common changes, empty Flush implementation
Style/Whitespace:
* fix wrong variable usage
* remove unused variable
* use only C style comments
* add copyright header
* fix tabulation
Signed-off-by: Alon Levy <alevy@redhat.com>
libcacard: fix out of tree builds
Currently, the emulated pSeries machine requires the use of the
-kernel parameter in order to explicitly load a guest kernel. This
means booting from the virtual disk, cdrom or network is not possible.
This patch addresses this limitation by inserting a within-partition
firmware image (derived from the "SLOF" free Open Firmware project).
If -kernel is not specified, qemu will now load the SLOF image, which
has access to the qemu boot device list through the device tree, and
can boot from any of the usual virtual devices.
In order to support the new firmware, an extension to the emulated
machine/hypervisor is necessary. Unlike Linux, which expects
multi-CPU entry to be handled kexec() style, the SLOF firmware expects
only one CPU to be active at entry, and to use a hypervisor RTAS
method to enable the other CPUs one by one.
This patch also implements this 'start-cpu' method, so that SLOF can
start the secondary CPUs and marshal them into the kexec() holding
pattern ready for entry into the guest OS. Linux should, and in the
future might directly use the start-cpu method to enable initially
disabled CPUs, but for now it does require kexec() entry.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations. On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege. For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.
This patch implements such a hypercall based RTAS for our emulated pSeries
machine. A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add the first Microblaze little endian platform.
Platform uses uart16550, axi ethernet, timer, intc.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Just compiled from vgabios git repo @ git.qemu.org,
copyed over and committed. Also added to the list
of blobs in the Makefile.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Patching the rom data during load (in qemu) now
also supports i82801 (which had no rom file).
We only need a single rom file for the whole device family,
so remove the second one which is no longer needed.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.
This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.
The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.
Example usage of a dtrace probe in systemtap looks like:
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.
This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.
The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.
Example usage of a dtrace probe in systemtap looks like:
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This moves library functions used by both QEMU and the QEMU tools,
such as qemu-img, qemu-nbd etc. from osdep.c to oslib-{posix,win32}.c
In addition it introduces oslib-obj.y to the Makefile set to be
included by the various targets, instead of relying on these library
functions magically getting included via block-obj-y.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All files include qemu-options.h which pulls in qemu-options.def from
the root directory. Thus generating qemu-options.def from Makefile.objs
under the target directory is not effective.
Further, people expect .def file to get cleaned with make clean:
it does not have state so no reason to defer removing it
until distclean. Also add a rule to remove old files that might
be around.
This fixes the error: ‘QEMU_OPTION_spice’ undeclared
(first use in this function) error that some people reported
which is really down to an out of date .def file.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.
Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.
Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.
After this change, tracing can be used also for user code and
simpletrace on Win32.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu_malloc instrumentations require linking against the trace objects.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.
Remove video.x MoL hacks.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
'make clean' did not remove trace.[ch]-timestamp files,
only trace.[ch]. But 'make' did not know how to make trace.[ch]
files if the timestamp files were present.
Fix by removing the timestamp files along with trace.[ch].
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add logic to detect changes in generated files. If the old
and new files are identical, don't touch the generated file.
This avoids a lot of churn since many files depend on trace.h.
Based on suggestion by Paolo Bonzini.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The logic of detecting changes in default-configs/*.mak is
flawed as can be demonstrated by 'touch default-configs/*.mak'
followed by make. This results in a message claiming that user
made changes to the */config-devices.mak files.
Fix by separating the detection of changes made by the user and
changes in the default-configs.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Let's be consistent and call it hmp-commands.hx, so that we have
qmp-commands.hx for QMP and hmp-commands.hx for HMP.
Please, note that this commit doesn't touch qemu-monitor.texi. All
texi files have the qemu- prefix and I don't think it's worth
changing that.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This file contains a copy of the following information from the
qemu-monitor.hx file:
o QObject handlers entries
o QMP documentation (all SQMP/EQMP sections)
Right now it's only used to generate the QMP docs in QMP/, but
next commits will turn this into QMP's command dispatch table.
It's important to note that QObject handlers entries are going
to get duplicated: they will exist in both QMP's and HMP's
dispatch tables.
This will be fixed in the near future, when we add a proper
QMP call interface and HMP is converted to use it. This way we
can completely drop QObject handlers entries from HMP's tables.
NOTE: HMP specific constructions, like "q|quit", have been dropped.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add QEMU version information to the executables, based on earlier
work by C. W. Betts and Robert Riebisch.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
On a clean build, after generating trace.h, make would recurse into *-*-user
without a clue how to build ../trace.o (added to $(obj-y) in Makefile.target)
since its generation rule is in the main Makefile.
The softmmus are seemingly unaffected because the $(TOOLS), which each have
a dependency on $(trace-obj-y), are built first for the build-all target.
Add a dependency on $(trace-obj-y) for %-user, as done for the qemu-* tools.
Let's be paranoid and do the same for %-softmmu while at it, just in case
someone messes with $(TOOLS) or calls the Makefile target directly.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Prerna Saxena <prerna@linux.vnet.ibm.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds a simple tracer which produces binary trace files. To
try out the simple backend:
$ ./configure --trace-backend=simple
$ make
After running QEMU you can pretty-print the trace:
$ ./simpletrace.py trace-events trace.log
The output of simpletrace.py looks like this:
qemu_realloc 0.699 ptr=0x24363f0 size=0x3 newptr=0x24363f0
qemu_free 0.768 ptr=0x24363f0
^ ^---- timestamp delta (us)
|____ trace event name
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Make trace record fields 64-bit
Explicitly use 64-bit fields in trace records so that timestamps and
magic numbers work for 32-bit host builds.
Includes fixes from Prerna Saxena <prerna@linux.vnet.ibm.com>.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch introduces the trace-events file where trace events can be
declared like so:
qemu_malloc(size_t size) "size %zu"
qemu_free(void *ptr) "ptr %p"
These trace event declarations are processed by a new tool called
tracetool to generate code for the trace events. Trace event
declarations are independent of the backend tracing system (LTTng User
Space Tracing, ftrace markers, DTrace).
The default "nop" backend generates empty trace event functions.
Therefore trace events are disabled by default.
The trace-events file serves two purposes:
1. Adding trace events is easy. It is not necessary to understand the
details of a backend tracing system. The trace-events file is a
single location where trace events can be declared without code
duplication.
2. QEMU is not tightly coupled to one particular backend tracing system.
In order to support tracing across QEMU host platforms and to
anticipate new backend tracing systems that are currently maturing,
it is important to be flexible and not tied to one system.
This commit includes fixes from Prerna Saxena
<prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Move sdl, vnc, curses and cocoa UI into ui/ to cleanup
the root directory. Also remove some unnecessary explicit
targets from Makefile.
aliguori: fix build when srcdir != objdir
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There were fsdev/qemu-fsdev.{o,d} not removed at "make clean".
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
One of the most important missing feature in QMP today is its
supported commands documentation.
The plan is to make it part of self-description support, however
self-description is a big task we have been postponing for a
long time now and still don't know when it's going to be done.
In order not to compromise QMP adoption and make users' life easier,
this commit adds a simple text documentation which fully describes
all QMP supported commands.
This is not ideal for a number of reasons (harder to maintain,
text-only, etc) but does improve the current situation. To avoid at
least divering from the user monitor help and texi snippets, QMP bits
are also maintained inside qemu-monitor.hx, and hxtool is extended to
generate a single text file from them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for tight encoding [1]. This patch only add support
for "basic" tight compression without any filter.
[1] http://tigervnc.org/cgi-bin/rfbproto#tight-encoding.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The 'tarbin' Makefile rule doesn't include qemu-system-sparc64, but
should do, now that sparc64-softmmu is in the default target list.
The rule attempts to tar up binaries that were not built if a target
list was passed to the configure script -- in which case, it will
either fail, or otherwise include binaries from previous builds.
Fix both problems once and for all by building a list of binaries to
include in the tarball, using the list of targets to be built.
Signed-off-by: Stuart Brady <sdb@zubnet.me.uk>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds a firmware blob to the S390 target. The blob is a simple
implementation of a virtio client that tries to read the second stage
bootloader from sectors described as of offset 0x20 in the MBR.
In combination with an updated zipl this allows for booting from virtio
block devices. This firmware is built from the same sources as the second
stage bootloader. You can find a virtio capable s390-tools in this repo:
git://repo.or.cz/s390-tools.git
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This will allow to implement new encodings (tight, zrle, ..)
in a cleaner way. This may hurt performances, because some
functions like vnc_convert_pixel are not static anymore, but
should not be a problem with gcc 4.5 and the new -flto.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio-net code uses iov_fill() which fills an iov from a linear
buffer. The virtio-serial-bus code does something similar in an
open-coded function.
Create a new iov.c file that has iov_from_buf().
Convert virtio-net and virtio-serial-bus over to use this functionality.
virtio-net used ints to hold sizes, the new function is going to use
size_t types.
Later commits will add the opposite functionality -- going from an iov
to a linear buffer.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The location tracking interface is used by code shared with qemi-img,
qemu-nbd and qemu-io, so it needs to be available there. Commit
827b0813 provides it in a rather hamfisted way: it adds a dummy
implementation to qemu-tool.c.
It's cleaner to provide the real thing, and put a few more dummy
monitor functions into qemu-tool.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When creating and populating $sysconfdir, we should prepend $DESTDIR
as we do with all other paths.
Reported-by: Frank Arnold <frank.arnold@amd.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
To create html output from texi input, texi2html was used.
Output from makeinfo looks cleaner, so replace the old rule
and use makeinfo now.
For those who want to use their own variant of html output,
the macros MAKEINFO and MAKEINFOFLAGS allow customisation.
Option "-I ." is not needed (the current directory is
searched by default), so remove it.
Please note that the build requirements changed, too:
makeinfo is required for doc builds.
texi2html is no longer used.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
da51e79b7f added two new ROM files
and removed an old one for eepro100.c.
These changes were missing in Makefile (which resulted
in a broken "make install").
Reported by Lucas Meneghel Rodrigues, thanks.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit b5ec5ce0 broke 'make install' from non source-dir build. Fix.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.
A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration. It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage. The other
consideration was providing models names reflective of
current processors. Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.
This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models. Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.
Proposed new model definitions are provided here for current
AMD and Intel processors. Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.
A table of names/model_ids may be queried via "-cpu ?model":
:
x86 Opteron_G3 AMD Opteron 23xx (Gen 3 Class Opteron)
x86 Opteron_G2 AMD Opteron 22xx (Gen 2 Class Opteron)
x86 Opteron_G1 AMD Opteron 240 (Gen 1 Class Opteron)
x86 Nehalem Intel Core i7 9xx (Nehalem Class Core i7)
x86 Penryn Intel Core 2 Duo P9xxx (Penryn Class Core 2)
x86 Conroe Intel Celeron_4x0 (Conroe/Merom Class Core 2)
:
Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.
The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:
# qemu-system-x86_64 ... -cpu Nehalem,check
warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]
A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.
Configuration data for a cpu model resides in the target config
file which by default will be installed as:
/usr/local/etc/qemu/target-<arch>.conf
The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.
Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.
This patch was tested relative to qemu.git.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Makefile already supported dvi, html and info formats,
but pdf was missing.
pdf is especially convenient for printing and for
documentation reviews. I hope it will help to
improve qemu's documentation.
Make now supports the new target 'pdf' which will
create qemu-doc.pdf and qemu-tech.pdf. It is also
possible to build both files individually.
texi2pdf and texi2dvi are rather noisy, so normally
some less important warnings are suppressed.
When make is called with V=1 (verbose mode),
warnings are not suppressed.
The patch also sorts the documentation targets
alphabetically and wraps a line which was too long.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Helper function just like qdict_get_int(), just for QFloat/double.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch improves Anthony patch a6a853c862
Once there, it improves handling of object files for qemu tools
cc: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When make is called without a valid configuration,
it should tell the user what to do.
Revision 0e8c9214ba
was a regression which resulted in a message
which was no longer user friendly
(reported by Aurelien Jarno).
This patch restores the old behaviour.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Andreas Färber <afaerber@opensolaris.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds a few more vpath suffixes and points the remaining two paths
explicitly to $(SRC_PATH) in order to eliminate the VPATH assignment
from config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes rebuilds after source updates easier
for most users (who don't edit config-devices.mak).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The vpath directive has two advantages over the VPATH variable:
1) it allows to skip searching of .o files; 2) the default semantics
are to append to the vpath, so there is no confusion between "VPATH=xyz"
and "VPATH+=xyz".
Since "vpath %.c %.h PATH" is not valid, I'm introducing a wrapper
macro to append one or more directories to the vpath.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan has contributed a cool Makefile infrastructure that enables us to drop
static libraries completely:
Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-},
and link those object files directly into the executables.
Replace HWLIB by HWDIR, specifying only the directory.
Drop --whole-archive and ARLIBS in Makefiles and configure.
Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all
common objects after generating a target-specific header; add dependency
rules to Makefile and Makefile.target instead.
v2:
- Don't try to include /config.mak for user emulators
- Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted
by "user_only: compile everything with -fpie" (Kirill A. Shutemov)
v3:
- Fix dependency modelling for tools
- Remove comment on GENERATED_HEADERS obsoleted by this patch
Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Palle Lyckegaard <palle@lyckegaard.dk>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Cc: Juan Quintela <quintela@trasno.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make libuser.a depend on $(GENERATED_HEADERS) too so make -j won't start
building it before the headers exist. (There may be more bugs like this
but at least this makes (g)make -j4 started from scratch on a quadcore
now always complete here again.)
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Each block device information is stored in a QDict and the
returned QObject is a QList of all devices.
This commit should not change user output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A helper function to get a QList from a QDict.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a helper function that does type checking before retrieving
a QBool from the dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Other subsystems will need to link against them.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make using mingw32 on windows fails when running grep "=y$$".
The command is expanded to grep "=y$ and the missing "
results in an error.
I don't expect a file config-devices.mak with =y somewhere in
the middle of a line (they are always at the end of the line),
so simplifying the regular expression to =y seems to be permitted.
This avoids problems with wrong expansion.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QError is a high-level data type which represents an exception
in QEMU, it stores the following error information:
- class Error class name (eg. "ServiceUnavailable")
- description A detailed error description, which can contain
references to run-time error data
- filename The file name of where the error occurred
- line number The exact line number of the error
- function The function name of where the error occurred
- run-time data Any run-time error data
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Thanks to f527c57935
(fix parallel build), these prerequisites
are redundant now and can be removed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add makefile dependencies for target specific device configs.
These will copy the default config if none exists, obsoleting the old
configure time code. If a config already exists but is older than the
default then print a warning.
Also remove config-devices.h. Code does not and should not care which
devices are being built.
Signed-off-by: Paul Brook <paul@codesourcery.com>
We should install linuxboot.bin too, so let's add it to the to-be-installed
blobs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is the third and final stage of the JSON parser. It parses lexical tokens
performing grammar validation and creating the final QObject representation. It
uses a recursive decent parser.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The second stage of our JSON parser is a simple state machine that identifies
individual JSON values by counting the levels of nesting of tokens. It does
not perform grammar validation. We use this to emit a full JSON value to the
parser.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Our JSON parser is a three stage parser. The first stage tokenizes the stream
into a set of lexical tokens. Since the lexical grammar is regular, we can
use a finite state machine to model it. The state machine will emit tokens
as they are identified.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch introduces block migration called during live migration. Block
are being copied to the destination in an async way. First the code will
transfer the whole disk and then transfer all dirty blocks accumulted during
the migration.
Still need to improve transition from the iterative phase of migration to the
end phase. For now transition will take place when all blocks transfered once,
all the dirty blocks will be transfered during the end phase (guest is
suspended).
Changes from v4:
- Global variabels moved to a global state structure allocated dynamically.
- Minor coding style issues.
- Poll block.c for tracking of dirty blocks instead of manage it here.
Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes clean in case of missing directories and
also adds code to distclean that removes the following files:
qemu-monitor.texi roms/seabios/config.mak roms/vgabios/config.mak
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Based on a ideas of Daniel Jacobowitz + Stefan Weil
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Remove 2nd entry for pxe-pcnet.bin.
This kind of error can be avoided by sorting
entries. So all pxe-*.bin entries are now sorted
alphabetically.
* Rename pxe-eepro100.bin -> pxe-i82559er.bin.
This change completes another patch which did
the rename on the pxe image for i82559er.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace
GEN config-all-devices.mak
by
GEN config-all-devices.mak
Like this, the logging output is column aligned.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is needed also for qemu-io, but not for qemu-nbd.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since config-host.h is generated by the Makefile (1215c6e76),
building (only) qemu-img fails:
[user@f12-uri qemu]$ make distclean (or git clone qemu)
[user@f12-uri qemu]$ ./configure ...
[user@f12-uri qemu]$ make qemu-img
GEN config-all-devices.mak
GEN qemu-img-cmds.h
CC qemu-img.o
In file included from qemu-img.c:24:
qemu-common.h:32:25: error: config-host.h: No such file or directory
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Okay, this makes the tap options available on AIX even though there's
no support, but if we want to do it right we should have not compile
the tap code at all on AIX using e.g. CONFIG_TAP.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch makes make quiet again.
There is already a similar patch from Juan Quintela,
but maybe this shorter form is preferred.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The packet queue code is fairly standalone, has some complex details and
easily reusable. It makes sense to split it out on its own. This patch
doesn't contain any functional changes.
Patchworks-ID: 35511
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This suite contains tests to assure that QList API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qlist
Patchworks-ID: 35333
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QList is a high-level data type that can be used to store QObjects
in a singly-linked list.
The following functions are available:
- qlist_new() Create a new QList
- qlist_append() Append a QObject to the list
- qlist_iter() Iterate over stored QObjects
Patchworks-ID: 35334
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Generate config-devices.h for each target and config-all-devices.h for
common library. We don't want to name both config-devices.h to avoid
path problems
Patchworks-ID: 35195
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main
Makefile for them.
Patchworks-ID: 35196
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add config.h file that includes config-target.h and config-host.h
Patchworks-ID: 35193
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If config-host.mak dont' exist, we have exited in the check at
the beginning of the file.
Once here, move the bits to the else part of the test at the beginning of
the file.
Patchworks-ID: 35191
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use timestamp based appreach to avoid not needed recompilation.
Add it to rules.mak
Many thanks to Paolo Bonzini for helpding the design, and the debug.
Patchworks-ID: 35190
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The CPU state parameter is not used, remove it and adjust callers. Now we
can compile ioport.c once for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Build uset targers as true PIE if user want to keep qemu
self-virtualizable.
v5:
- Split into to patches: drop link hack and add PIE support
- do not build PIE by default and drop toolchain check
v4:
- Add test for toolchain if it has proper PIE support
v3:
- One more pice of the hack was removed
- Description updated
v2:
- Add configure options do enable/disable PIE for usermode targets.
Disabling can be useful if you build uswing toolchain which has
broken PIE support. PIE for usermode targets enabled by default.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* Add USBBus.
* Add USBDeviceInfo, move device callbacks here.
* Add usb-qdev helper functions.
* Switch drivers to qdev.
TODO:
* make the rest of qemu aware of usb busses and kill the FIXMEs
added by this patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This suite contains tests to assure that QDict API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qdict
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This suite contains tests to assure that QString API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qstring
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This suite contains tests to assure that QInt API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qint
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QDict is a high-level dictionary data type that can be used to store a
collection of QObjects. A unique key is associated with only one
QObject.
The following functions are available:
- qdict_new() Create a new QDict
- qdict_put() Add a new 'key:object' pair
- qdict_get() Get the QObject of a given key
- qdict_del() Delete a 'key:object' pair
- qdict_size() Return the size of the dictionary
- qdict_haskey() Check if a given 'key' exists
Some high-level helpers to operate on QStrings and QInts objects
are also provided.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QString is a high-level data type that can be used to represent
C strings.
The following functions are available:
- qstring_from_str() Create a new QString
- qstring_get_str() Get a pointer to the stored string
Note that qstring_get_str() is too low-level for a data type like
this, but it's interesting for quick read-only accesses.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QInt is a high-level data type that can be used to represent integers,
internally it stores an int64_t value.
The following functions are available:
- qint_from_int() Create a new QInt
- qint_get_int() Get the stored integer
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that do have a nicer interface to work against we can add Linux native
AIO support. It's an extremly thing layer just setting up an iocb for
the io_submit system call in the submission path, and registering an
eventfd with the qemu poll handler to do complete the iocbs directly
from there.
This started out based on Anthony's earlier AIO patch, but after
estimated 42,000 rewrites and just as many build system changes
there's not much left of it.
To enable native kernel aio use the aio=native sub-command on the
drive command line. I have also added an option to qemu-io to
test the aio support without needing a guest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As requested by Anthony make pthreads mandatory. This means we will always
have AIO available on posix hosts, and it will also allow enabling the I/O
thread unconditionally once it's ready.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement migration via unix sockets. While you can fake this using
exec and netcat, this involves forking another process and is
generally not very nice. By doing this directly in qemu, we can avoid
the copy through the external nc command. This is useful for
implementations (such as libvirt) that want to do "secure" migration;
we pipe the data on the sending side into the unix socket, libvirt
picks it up, encrypts it, and transports it, and then on the remote
side libvirt decrypts it, dumps it to another unix socket, and
feeds it into qemu.
The implementation is straightforward and looks very similar to
migration-exec.c and migration-tcp.c
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- still works if the build dir is not the src dir
- use find instead of *.c block/*.c etc...
Signed-off-by: Alexandre Bique <alexandre.bique@citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
AUDIO_PT only changes LDFLAGS to include -pthread, but it change it in
Makefile, and audio files are linked only on Makefile.target
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Now we have to variables: QEMU_CFLAGS: flags without which we can't compile
CFLAGS: "-g -O2"
We can now run:
make CFLAGS="-fbar" foo.o
make CFLAGS="" foo.o
make CFLAGS="-O3" foo.o
And it all should work.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This is a new block driver written from scratch
to support the VDI format in QEMU.
VDI is the native format used by Innotek / SUN VirtualBox.
Latest changes:
* stripped down version
(code for synchronous operations and experimental code removed)
* don't open VDI snapshot images (with uuid_link or uuid_parent)
* modified vdi_aio_cancel
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
This patch is a major overhaul of the device properties. The properties
are saved directly in the device state struct now, the linked list of
property values is gone.
Advantages:
* We don't have to maintain the list with the property values.
* The value in the property list and the value actually used by
the device can't go out of sync any more (used to happen for
the pci.devfn == -1 case) because there is only one place where
the value is stored.
* A record describing the property is required now, you can't set
random properties any more.
There are bus-specific and device-specific properties. The former
should be used for properties common to all bus drivers. Typical
use case is bus addressing, i.e. pci.devfn and i2c.address.
Properties have a PropertyInfo struct attached with name, size and
function pointers to parse and print properties. A few common property
types have PropertyInfos defined in qdev-properties.c. Drivers are free
to implement their own very special property parsers if needed.
Properties can have default values. If unset they are zero-filled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to build the multiboot option rom, we need a Makefile and a tool
to sign the rom with.
Both are provided by this patch and mostly taken from the extboot source,
written by Anthony Liguori.
Once built, the resulting binary gets copied to pc-bios automatically.
Building also occurs automatically when on an x86 host.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hi all,
this patch implements zooming capabilities for the sdl interface.
A new sdl_zoom_blit function is added that is able to scale and blit a
portion of a surface into another.
This way we can enable SDL_RESIZABLE and have a real_screen surface with
a different size than the guest surface and let sdl_zoom_blit take care
of the problem.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qcow2-snapshot.c contains the code related to snapshotting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qcow2-cluster.c contains all functions related to the management of guest
clusters, i.e. what the guest sees on its virtual disk. This code is about
mapping these guest clusters to host clusters in the image file using the
two-level lookup tables.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qcow2-refcount.c contains all functions which are related to cluster
allocation and management in the image file. A large part of this is the
reference counting of these clusters.
Also a header file qcow2.h is introduced which will contain the interface of
the split qcow2 modules.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use hxtool to generate the 'command syntax' section of qemu-img's help
message, and the corresponding section of the texinfo documentation.
This has the side-effect of adding 'check' to this list of commands in
the texinfo documentation.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Currently Qemu can read from posix I/O and NBD. This patch adds a
third protocol to the game: HTTP.
In certain situations it can be useful to access HTTP data directly,
for example if you want to try out an http provided OS image, but
don't know if you want to download it yet.
Using this patch you can now try it on on the fly. Just use it like:
qemu -cdrom http://host/path/my.iso
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch creates a new header file and the corresponding implementation file
for parsing of parameter strings for options (like used in -drive). Part of
this is code moved from vl.c (so qemu-img can use it later).
The idea is to have a data structure describing all accepted parameters. When
parsing a parameter string, the structure is copied and filled with the
parameter values.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The only target dependency for most hardware is sizeof(target_phys_addr_t).
Build these files into a convenience library, and use that instead of
building for every target.
Remove and poison various target specific macros to avoid bogus target
dependencies creeping back in.
Big/Little endian is not handled because devices should not know or care
about this to start with.
Signed-off-by: Paul Brook <paul@codesourcery.com>
