The awaiting_allocation flag in the DRC was introduced by aab9913
"spapr_drc: Prevent detach racing against attach for CPU DR", allegedly to
prevent a guest crash on racing attach and detach. Except.. information
from the BZ actually suggests a qemu crash, not a guest crash. And there
shouldn't be a problem here anyway: if the guest has already moved the DRC
away from UNUSABLE state, the detach would already be deferred, and if it
hadn't it should be safe to detach it (the guest should fail gracefully
when it attempts to change the allocation state).
I think this was probably just a bandaid for some other problem in the
state management. So, remove awaiting_allocation and associated code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
When migrating a guest which has already had devices hotplugged,
libvirt typically starts the destination qemu with -incoming defer,
adds those hotplugged devices with qmp, then initiates the incoming
migration.
This causes problems for the management of spapr DRC state. Because
the device is treated as hotplugged, it goes into a DRC state for a
device immediately after it's plugged, but before the guest has
acknowledged its presence. However, chances are the guest on the
source machine *has* acknowledged the device's presence and configured
it.
If the source has fully configured the device, then DRC state won't be
sent in the migration stream: for maximum migration compatibility with
earlier versions we don't migrate DRCs in coldplug-equivalent state.
That means that the DRC effectively changes state over the migrate,
causing problems later on.
In addition, logging hotplug events for these devices isn't what we
want because a) those events should already have been issued on the
source host and b) the event queue should get wiped out by the
incoming state anyway.
In short, what we really want is to treat devices added before an
incoming migration as if they were coldplugged.
To do this, we first add a spapr_drc_hotplugged() helper which
determines if the device is hotplugged in the sense relevant for DRC
state management. We only send hotplug events when this is true.
Second, when we add a device which isn't hotplugged in this sense, we
force a reset of the DRC state - this ensures the DRC is in a
coldplug-equivalent state (there isn't usually a system reset between
these device adds and the incoming migration).
This is based on an earlier patch by Laurent Vivier, cleaned up and
extended.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The rtas_error_log structure is marked packed, which strongly suggests its
precise layout is important to match an external interface. Along with
that one could expect it to have a fixed endianness to match the same
interface. That used to be the case - matching the layout of PAPR RTAS
event format and requiring BE fields.
Now, however, it's only used embedded within sPAPREventLogEntry with the
fields in native order, since they're processed internally.
Clear that up by removing the nested structure in sPAPREventLogEntry.
struct rtas_error_log is moved back to spapr_events.c where it is used as
a temporary to help convert the fields in sPAPREventLogEntry to the correct
in memory format when delivering an event to the guest.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In racing situations between hotplug events and migration operation,
a rtas hotplug event could have not yet be delivered to the source
guest when migration is started. In this case the pending_events of
spapr state need be transmitted to the target so that the hotplug
event can be finished on the target.
To achieve the minimal VMSD possible to migrate the pending_events list,
this patch makes the changes in spapr_events.c:
- 'log_type' of sPAPREventLogEntry struct deleted. This information can be
derived by inspecting the rtas_error_log summary field. A new function
called 'spapr_event_log_entry_type' was added to retrieve the type of
a given sPAPREventLogEntry.
- sPAPREventLogEntry, epow_log_full and hp_log_full were redesigned. The
only data we're going to migrate in the VMSD is the event log data itself,
which can be divided in two parts: a rtas_error_log header and an extended
event log field. The rtas_error_log header contains information about the
size of the extended log field, which can be used inside VMSD as the size
parameter of the VBUFFER_ALOC field that will store it. To allow this use,
the header.extended_length field must be exposed inline to the VMSD instead
of embedded into a 'data' field that holds everything. With this in mind,
the following changes were done:
* a new 'header' field was added to sPAPREventLogEntry. This field holds a
a struct rtas_error_log inline.
* the declaration of the 'rtas_error_log' struct was moved to spapr.h
to be visible to the VMSD macros.
* 'data' field of sPAPREventLogEntry was renamed to 'extended_log' and
now holds only the contents of the extended event log.
* 'struct rtas_error_log hdr' were taken away from both epow_log_full
and hp_log_full. This information is now available at the header field of
sPAPREventLogEntry.
* epow_log_full and hp_log_full were renamed to epow_extended_log and
hp_extended_log respectively. This rename makes it clearer to understand
the new purpose of both structures: hold the information of an extended
event log field.
* spapr_powerdown_req and spapr_hotplug_req_event now creates a
sPAPREventLogEntry structure that contains the full rtas log entry.
* rtas_event_log_queue and rtas_event_log_dequeue now receives a
sPAPREventLogEntry pointer as a parameter instead of a void pointer.
- the endianess of the sPAPREventLogEntry header is now native instead
of be32. We can use the fields in native endianess internally and write
them in be32 in the guest physical memory inside 'check_exception'. This
allows the VMSD inside spapr.c to read the correct size of the
entended_log field.
- inside spapr.c, pending_events is put in a subsection in the spapr state
VMSD to make sure migration across different versions is not broken.
A small change in rtas_event_log_queue and rtas_event_log_dequeue were also
made: instead of calling qdev_get_machine(), both functions now receive
a pointer to the sPAPRMachineState. This pointer is already available in
the callers of these functions and we don't need to waste resources
calling qdev() again.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All the DRC subtypes explicitly list instance_size in TypeInfo (all as
sizeof(sPAPRDRConnector). This isn't necessary, since if it's not listed
it will be derived from the parent type.
Worse, this is dangerous, because if a subtype is changed in future to
have a larger structure, then subtypes of that subtype also need to have
instance_size changed, or it will lead to hard to track memory corruption
bugs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch to memory_region_init_ram(), since we pass the same DeviceState
to both memory_region_init_ram_nomigrate() and vmstate_register_ram().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-11-git-send-email-peter.maydell@linaro.org
Since we pass the same DeviceState object to
memory_region_init_rom_nomigrate() and vmstate_register_ram(), we can
switch to using memory_region_init_rom() instead.
(This isn't entirely obvious from the code since it is using
&pdev->qdev rather than DEVICE(pdov) for some reason, but
PCIDevice does indeed use 'qdev' for its parent DeviceState member.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-10-git-send-email-peter.maydell@linaro.org
Since we pass the same DeviceState object to
memory_region_init_rom_device_nomigrate() and vmstate_register_ram(),
we can switch to using memory_region_init_rom_device() instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-9-git-send-email-peter.maydell@linaro.org
Use the new functions memory_region_init_{ram,rom,rom_device}()
instead of manually calling the _nomigrate() version and then
vmstate_register_ram_global().
Patch automatically created using coccinelle script:
spatch --in-place -sp_file scripts/coccinelle/memory-region-init-ram.cocci -dir hw
(As it turns out, there are no instances of the rom and
rom_device functions that are caught by this script.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-8-git-send-email-peter.maydell@linaro.org
Rename memory_region_init_rom() to memory_region_init_rom_nomigrate()
and memory_region_init_rom_device() to
memory_region_init_rom_device_nomigrate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-5-git-send-email-peter.maydell@linaro.org
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate().
This leaves the way clear for us to provide a memory_region_init_ram()
which does handle migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=2bOV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170714: (40 commits)
s390x/gdb: add gs registers
s390x/arch_dump: also dump guarded storage control block
s390x/kvm: enable guarded storage
s390x/kvm: Enable KSS facility for nested virtualization
s390x/cpumodel: add esop/esop2 to z12 model
s390x/cpumodel: we are always in zarchitecture mode
s390x/cpumodel: wire up new hardware features
s390x/flic: migrate ais states
s390x/cpumodel: add zpci, aen and ais facilities
s390x: initialize cpu firstly
pc-bios/s390: rebuild s390-ccw.img
pc-bios/s390: add s390-netboot.img
pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
pc-bios/s390-ccw: Add virtio-net driver code
pc-bios/s390-ccw: Add core files for the network bootloading program
roms/SLOF: Update submodule to latest status
pc-bios/s390-ccw: Add code for virtio feature negotiation
pc-bios/s390-ccw: Remove unused structs from virtio.h
pc-bios/s390-ccw: Move byteswap functions to a separate header
pc-bios/s390-ccw: Add a write() function for stdio
...
Conflicts:
target/s390x/kvm.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce guarded storage support for KVM guests on s390.
We need to enable the capability, extend machine check validity,
sigp store-additional-status-at-address, and migration.
The feature is fenced for older machine type versions.
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add esop and esop2 features to z12 model where esop2 was originally
introduced. Disable esop and esop2 when using compatibility machine
v2.9 or earlier.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
During migration we should transfer ais states to the target guest.
This patch introduces a subsection to kvm_s390_flic_vmstate and new
vmsd for qemu_flic. The ais states need to be migrated only when
ais is supported.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
zPCI instructions and facilities are available since IBM zEnterprise
EC12. To support z/PCI in QEMU we enable zpci, aen and ais facilities
starting with zEC12 GA1. And we always set zpci and aen bits in max cpu
model. Later they might be switched off due to applied real cpu model.
For ais bit, we only provide it in the full cpu model beginning with
zEC12 and defer its enablement in the default cpu model to a later point
in time. At the same time, disable them for 2.9 and older machines.
Because of introducing AIS facility, we could check if it's enabled to
initialize flic->ais_supported with the real value.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
By initializing the CPU firstly, we are able to retrieve and use the
CPU model features when initializing other subsystem or devices.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Instead of passing around a pointer to ORB let us simplify some
function signatures by using the previously introduced ORB saved at the
subchannel (SubchDev).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-7-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Turn on migration for the channel subsystem for the next machine. For
legacy machines we still have to do things the old way.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-6-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Since we are going to need a migration compatibility breaking change to
activate ChannelSubSys migration let us use the opportunity to introduce
ORB to the SubchDev before that (otherwise we would need separate
handling e.g. a compat property).
The ORB will be useful for implementing IDA, or async handling of
subchannel work.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-5-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Although we have recently vmstatified the migration of some css
infrastructure, for some css entities there is still state to be
migrated left, because the focus was keeping migration stream
compatibility (that is basically everything as-is).
Let us add vmstate helpers and extend existing vmstate descriptions so
that we have everything we need. Let us guard the added state via
css_migration_enabled, so we keep the compatible behavior if css
migration is disabled.
Let's also annotate the bits which do not need to be migrated for better
readability.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170711145441.33925-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently the migration of the channel subsystem (css) is only partial
and is done by the virtio ccw proxies -- the only migratable css devices
existing at the moment.
With the current work on emulated and passthrough devices we need to
decouple the migration of the channel subsystem state from virtio ccw,
and have a separate section for it. A new section however necessarily
breaks the migration compatibility.
So let us introduce a switch at the machine class, and put it in 'off'
state for now. We will turn the switch 'on' for future machines once all
preparations are met. For compatibility machines the switch will stay
'off'.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We will need the machine class at machine initialization time, so the
usual way via qdev won't do. Let's cache the machine class and also use
the default values of the base machine for capability discovery.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's use the new inject_airq callback of flic to inject adapter
interrupts. For kvm case, if the kernel flic doesn't support the new
interface, the irq routine remains unchanged. For non-kvm case,
qemu-flic handles the suppression process.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently, we do nothing for the SIC instruction, but we need to
implement it properly. Let's add proper handling in the backend code.
Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's introduce a specialized way to inject adapter interrupts that,
unlike the common interrupt injection method, allows to take the
characteristics of the adapter into account.
For adapters subject to AIS facility:
- for non-kvm case, we handle the suppression for a given ISC in QEMU.
- for kvm case, we pass adapter id to kvm to do airq injection.
Add add tracepoint for suppressed airq and suppressing airq.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In order to emulate the adapter interruption suppression (AIS)
facility properly, the guest needs to be able to modify the AIS mask.
Interrupt suppression will be handled via the flic (for kvm, via a
recently introduced kernel backend; for !kvm, in the flic code), so
let's introduce a method to change the mode via the flic interface.
We introduce the 'simm' and 'nimm' fields to QEMUS390FLICState
to store interruption modes for each ISC. Each bit in 'simm' and
'nimm' targets one ISC, and collaboratively indicate three modes:
ALL-Interruptions, SINGLE-Interruption and NO-Interruptions. This
interface can initiate most transitions between the states; transition
from SINGLE-Interruption to NO-Interruptions via adapter interrupt
injection will be introduced in a following patch. The meaningful
combinations are as follows:
interruption mode | simm bit | nimm bit
------------------|----------|----------
ALL | 0 | 0
SINGLE | 1 | 0
NO | 1 | 1
Co-authored-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce a new 'flags' field to IoAdapter to contain further
characteristics of the adapter, like whether the adapter is subject to
adapter-interruption suppression.
For the kvm case, pass this value in the 'flags' field when
registering an adapter.
Signed-off-by: Fei Li <sherrylf@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add an "info" monitor command to non-destructively inspect the state of
the storage attributes of the guest, and a normal command to toggle
migration mode (useful for debugging).
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Storage attributes device, like we have for storage keys.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Unlike the usual object_property_add_link() invocations in other
devices, ivshmem checks the "is mapped" state of the backend in addition
to qdev_prop_allow_set_link_before_realize. To convert it without
specializing DEFINE_PROP_LINK which always uses the qdev callback, move
the extra check to device realize time.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-12-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike the usual object_property_add_link() invocations in other
devices, dimm checks the "is mapped" state of the backend in addition to
qdev_prop_allow_set_link_before_realize. To convert it without
specializing DEFINE_PROP_LINK which always uses the qdev general check
callback, move the extra check to device realize time.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-11-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike other object_property_add_link() occurrences in virtio devices,
virtio-crypto checks the "in use" state of the linked backend object in
addition to qdev_prop_allow_set_link_before_realize. To convert it
without needing to specialize DEFINE_PROP_LINK which always uses the
qdev callback, move the "in use" check to device realize time.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-10-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The remaining non-const ones are in e1000e which modifies description at
runtime. They can be addressed separatedly.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-6-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This property can be used to replace the object_property_add_link in
device code, to add a link to other objects, which is a common pattern.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-4-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
link's check callback is supposed to verify/permit setting it,
however currently nothing restricts it from misusing it
and modifying target object from within.
Make sure that readonly semantics are checked by compiler
to prevent callback's misuse.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This finishes QOM'fication of IOMMUMemoryRegion by introducing
a IOMMUMemoryRegionClass. This also provides a fastpath analog for
IOMMU_MEMORY_REGION_GET_CLASS().
This makes IOMMUMemoryRegion an abstract class.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170711035620.4232-3-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This defines new QOM object - IOMMUMemoryRegion - with MemoryRegion
as a parent.
This moves IOMMU-related fields from MR to IOMMU MR. However to avoid
dymanic QOM casting in fast path (address_space_translate, etc),
this adds an @is_iommu boolean flag to MR and provides new helper to
do simple cast to IOMMU MR - memory_region_get_iommu. The flag
is set in the instance init callback. This defines
memory_region_is_iommu as memory_region_get_iommu()!=NULL.
This switches MemoryRegion to IOMMUMemoryRegion in most places except
the ones where MemoryRegion may be an alias.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20170711035620.4232-2-aik@ozlabs.ru>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Parallel device don't register be->chr_can_read function, but remote
disconnect event is handled in chr_read.So connected parallel device
can not detect remote disconnect event. The chardevs with chr_can_read=NULL
has the same problem.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Reviewed-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Message-Id: <1499874119-67558-1-git-send-email-peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In mttcg, calling pause_all_vcpus() during execution from the
generated TBs causes a deadlock if some vCPU is waiting for exclusive
execution in start_exclusive(). Fix this by using the aync_safe_*
framework instead of pausing vcpus for patching instructions.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170712215143.19594-2-bobby.prani@gmail.com>
[Get rid completely of the TCG-specific code. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows to change the port's backend runtime, e.g. change it from
file to a socket making it possible to establish a debug session with
WinDbg
> qemu-system [..] -chardev file,id=charchannel2,path=/tmp/charchannel2 \
-device isa-serial,chardev=charchannel2,id=channel2
QEMU 2.9.50 monitor - type 'help' for more information
(qemu) chardev-change charchannel2 \
socket,host=127.0.0.1,port=4242,server,nowait
For a backend change, a number of ioctls has to be replayed to sync
the current setup of a frontend to a backend tty. This is hopefully
enough so we don't have to track, store and replay the whole original
control byte sequence.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1499342940-56739-14-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
will be used by the following patch
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-13-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case of a backend change, the handler functions and the watch have
to be reset.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1499342940-56739-12-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
frontends should avoid accessing CharDriver struct where possible
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-6-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all uses of error_report*_err("Warning:"... to use
warn_report*_err() instead. This helps standardise on a single
method of printing warnings to the user.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <d8e088757186955f40f04ec4f4be7f640d3c8660.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Changes:
* Fix MSA copy_[s|u]_df corner case of rd = 0
* Update malta to load the initrd at the end of the low memory
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)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=hfeO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170711' into staging
MIPS patches 2017-07-11
Changes:
* Fix MSA copy_[s|u]_df corner case of rd = 0
* Update malta to load the initrd at the end of the low memory
# gpg: Signature made Tue 11 Jul 2017 15:42:20 BST
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20170711:
mips/malta: load the initrd at the end of the low memory
target/mips: fix msa copy_[s|u]_df rd = 0 corner case
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Assigning directly to *errp is not valid, as errp may be null,
&error_fatal, or &error_abort. The !*errp conditional protects
against the latter two, but we then leak @local_err. Fortunately,
the qdev core always passes pointer to null, so this is "merely" a
latent bug.
Use error_propagate() instead.
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170608133906.12737-2-ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message clarified]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Several minor cleanups from Greg Kurz
* Fix for migration of pseries-2.7 and earlier machine types
* More reworking of the DRC hotplug code, fixing several problems
though there are still more to go
* Fixes for CPU family / alias handling on POWER9
* Preliminary patches for POWER9 XIVE (new interrupt controller)
support
* Assorted other fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=8Wy2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170711' into staging
ppc patch queue 2017-07-11
* Several minor cleanups from Greg Kurz
* Fix for migration of pseries-2.7 and earlier machine types
* More reworking of the DRC hotplug code, fixing several problems
though there are still more to go
* Fixes for CPU family / alias handling on POWER9
* Preliminary patches for POWER9 XIVE (new interrupt controller)
support
* Assorted other fixes
# gpg: Signature made Tue 11 Jul 2017 05:35:16 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170711:
spapr: populate device tree depending on XIVE_EXPLOIT option
spapr: introduce the XIVE_EXPLOIT option in CAS
ppc/kvm: have the "family" CPU alias to point to TYPE_HOST_POWERPC_CPU
spapr: Only report host/guest IOMMU page size mismatches on KVM
spapr: fix memory hotplug error path
target/ppc: Add debug function for radix mmu translation
target/ppc: Refactor tcg radix mmu code
spapr: Use unplug_request for PCI hot unplug
spapr: Remove unnecessary differences between hotplug and coldplug paths
spapr: Add DRC release method
spapr: Uniform DRC reset paths
spapr: Leave DR-indicator management to the guest
target-ppc: SPR_BOOKE_ESR not set on FP exceptions
spapr: fix migration to pseries machine < 2.8
spapr: fix bogus function name in comment
spapr: refresh "platform-specific" hcalls comment
spapr: make spapr_populate_hotplug_cpu_dt() static
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the malta board is loading the initrd just after the kernel.
This doesn't work for kaslr enabled kernels, as the initrd ends-up being
overwritten.
Move the initrd at the end of the low memory, that should leave a
sufficient gap for kaslr.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
When running with KVM enabled, you can choose between emulating the
gic in kernel or user space. If the kernel supports in-kernel virtualization
of the interrupt controller, it will default to that. If not, if will
default to user space emulation.
Unfortunately when running in user mode gic emulation, we miss out on
interrupt events which are only available from kernel space, such as the timer.
This patch leverages the new kernel/user space pending line synchronization for
timer events. It does not handle PMU events yet.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1498577737-130264-1-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ast2400 contains two and the ast2500 contains three watchdogs.
Add this information to the AspeedSoCInfo and realise the correct number
of watchdogs for that each SoC type.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add emulation for Exynos4210 Pseudo Random Number Generator which could
work on fixed seeds or with seeds provided by True Random Number
Generator block inside the SoC.
Implement only the fixed seeds part of it in polling mode (no
interrupts).
Emulation tested with two independent Linux kernel exynos-rng drivers:
1. New kcapi-rng interface (targeting Linux v4.12),
2. Old hwrng inteface
# echo "exynos" > /sys/class/misc/hw_random/rng_current
# dd if=/dev/hwrng of=/dev/null bs=1 count=16
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-id: 20170425180609.11004-1-krzk@kernel.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: wrapped a few overlong lines; more efficient implementation
of exynos4210_rng_seed_ready()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
fprintf(stderr) is how errors are reported in this file.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The kludged field 'msi_nonbroken' is declared in "hw/pci/msi.h" and defined in
hw/pci/msi.c.
When using an ARM config with CONFIG_PCI disabled, hw/pci/msi.c is not included.
Without being PCI-related, the files hw/intc/arm_gicv[23*].c do access this
field (to enable the kludge if PCI is enabled).
The final link fails since hw/pci/msi.c is not included.
Defining this field in pci-stub is safe enough for configs without CONFIG_PCI.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When XIVE is supported, the device tree should be populated
accordingly and the XIVE memory regions mapped to activate MMIOs.
Depending on the design we choose, we could also allocate different
ICS and ICP objects, or switch between objects. This needs to be
discussed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On POWER9, the Client Architecture Support (CAS) negotiation process
determines whether the guest operates in XIVE Legacy compatibility
(the former POWER8 interrupt model) or in XIVE exploitation mode (the
newer POWER9 interrupt model).
Bit 7 of Byte 23 of vector 5 is used for this purpose.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We print a warning if the spapr IOMMU isn't configured to support a page
size matching the host page size backing RAM. When that's the case we need
more complex logic to translate VFIO mappings, which is slower.
But, it's not so slow that it would be at all noticeable against the
general slowness of TCG. So, only warn when using KVM. This removes some
noisy and unhelpful warnings from make check on hosts with page sizes
which typically differ from those on POWER (e.g. Sparc).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
QEMU shouldn't abort if spapr_add_lmbs()->spapr_drc_attach() fails.
Let's propagate the error instead, like it is done everywhere else
where spapr_drc_attach() is called.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
AIUI, ->unplug_request in the HotplugHandler is used for "soft"
unplug, where acknowledgement from the guest is required before
completing the unplug, whereas ->unplug is used for "hard" unplug
where qemu unilaterally removes the device, and the guest just has to
cope with its sudden absence. For spapr we (correctly) use
->unplug_request for CPU and memory hot unplug but we use ->unplug for
PCI.
While I think it might be possible to support "hard" PCI unplug within
the PAPR model, that's not how it actually works now. Although it's
called from ->unplug, the PCI unplug path will usually just mark the
device for removal, with completion of the unplug delayed until
userspace responds to the unplug notification. If the guest doesn't
respond as expected, that could delay the unplug completion arbitrarily
long.
To reflect that, change the PCI unplug path to be called from
->unplug_request. We also rename spapr_phb_hot_plug_child() and
spapr_phb_hot_unplug_child() to spapr_pci_plug() and
spapr_pci_unplug_request() to more obviously reflect the callbacks they're
implementing.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
spapr_drc_attach() has a 'coldplug' parameter which sets the DRC into
configured state initially, instead of the usual ISOLATED/UNUSABLE state.
It turns out this is unnecessary: although coldplugged devices do need to
be in CONFIGURED state once the guest starts, that will already be
accomplished by the reset code which will move DRCs for already plugged
devices into a coldplug equivalent state.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
At the moment, spapr_drc_release() has an ugly switch on the DRC type to
call the right, device-specific release function. This cleans it up by
doing that via a proper QOM method.
It's still arguably an abstraction violation for the DRC code to call into
the specific device code, but one mess at a time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
DRC objects have a regular device reset method. However, it only gets
called in the usual way for PCI DRCs. Because of where CPU and LMB DRCs
are in the QOM tree, their device reset method isn't automatically called.
So, the machine manually registers reset handlers to call device_reset().
This patch removes the device reset method, and instead always explicitly
registers the reset handler from realize(). This means the callers don't
have to worry about the two cases, and we always get proper resets.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The DR-indicator is essentially a "virtual LED" attached to a hotpluggable
device, which the guest can set to various states for the attention of
the operator or management layers.
It's mostly guest managed, except that we once-off set it to
ACTIVE/INACTIVE in the attach/detach path. While that makes certain sense,
there's no indication in PAPR that the hypervisor should do this, and the
drmgr code on the guest side doesn't appear to need it (it will already set
the indicator to ACTIVE on hotplug, and INACTIVE on remove).
So, leave the DR-indicator entirely to the guest; the only thing we need
to do is ensure it's in a sane state on reset.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
since commit 5c4537bd ("spapr: Fix 2.7<->2.8 migration of PCI host bridge"),
some migration fields are forged from the new ones in spapr_pci_pre_save().
It works well, except when the number of MSI devices is 0,
because in this case the function exits immediately.
This fix moves the migration code before the exit code.
The problem can be reproduced with these commands:
source qemu-2.9:
qemu-system-ppc64 -monitor stdio -M pseries-2.6 -nodefaults -S
destination qemu-2.6:
qemu-system-ppc64 -monitor stdio -M pseries-2.6 -nodefaults \
-incoming tcp:0:4444
on the source:
migrate tcp:localhost:4444
Destination fails with the following error:
qemu-system-ppc64: error while loading state for
instance 0x0 of device 'spapr_pci'
qemu-system-ppc64: load of migration failed: Invalid argument
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
$ git grep spapr_ppc_reset
hw/ppc/spapr.c: * as part of spapr_ppc_reset().
$ git grep ppc_spapr_reset
hw/ppc/spapr.c:static void ppc_spapr_reset(void)
hw/ppc/spapr.c: mc->reset = ppc_spapr_reset;
hw/ppc/spapr_hcall.c: /* If ppc_spapr_reset() did not set up a HPT
but one is necessary
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit ff9006ddbf ("spapr: move spapr_core_[foo]plug() callbacks
close to machine code in spapr.c"), this function doesn't need to be extern
anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We need a cleanup for loads, so we rename here to be consistent.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
Rename htab_cleanup to htap_save_cleanup as dave suggestion
Message-Id: <20170628095228.4661-3-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are going to use it now for more than save live regions.
Once there rename qemu_savevm_state_begin() to qemu_savevm_state_setup().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170628095228.4661-2-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Intel 82599 VFs report a PCIe capability version of 0, which is
invalid. The earliest version of the PCIe spec used version 1. This
causes Windows to fail startup on the device and it will be disabled
with error code 10. Our choices are either to drop the PCIe cap on
such devices, which has the side effect of likely preventing the guest
from discovering any extended capabilities, or performing a fixup to
update the capability to the earliest valid version. This implements
the latter.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIOGroup.device_list is effectively our reference tracking mechanism
such that we can teardown a group when all of the device references
are removed. However, we also use this list from our machine reset
handler for processing resets that affect multiple devices. Generally
device removals are fully processed (exitfn + finalize) when this
reset handler is invoked, however if the removal is triggered via
another reset handler (piix4_reset->acpi_pcihp_reset) then the device
exitfn may run, but not finalize. In this case we hit asserts when
we start trying to access PCI helpers since much of the PCI state of
the device is released. To resolve this, add a pointer to the Object
DeviceState in our common base-device and skip non-realized devices
as we iterate.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
xen_pt_pci_config_access_check checks if addr >= 0xFF. 0xFF is a valid
address and should not be ignored.
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
When the guest unplugs the emulated NICs, cleanup the peer for each NIC
as it is not needed anymore. Most importantly, this allows the tap
interfaces which QEMU holds open to be closed and removed.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Initialize xenfb properly, as all other backends, from its own
"initialise" function.
Remove the dependency of vkbd on vfb: use qemu_console_lookup_by_index
to find the principal console (to get the size of the screen) instead of
relying on a vfb backend to be available (which adds a dependency
between the two).
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
The start address has to be stored in big endian byte order
in the iplb.ccw block for the guest.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499268345-12552-1-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch is based on a similar patch from Stefan Hajnoczi -
commit c324fd0a39 ("virtio-pci: use ioeventfd even when KVM is disabled")
Do not check kvm_eventfds_enabled() when KVM is disabled since it
always returns 0. Since commit 8c56c1a592
("memory: emulate ioeventfd") it has been possible to use ioeventfds in
qtest or TCG mode.
This patch makes -device virtio-scsi-ccw,iothread=iothread0 work even
when KVM is disabled.
Currently we don't have an equivalent to "memory: emulate ioeventfd"
for ccw yet, but that this doesn't hurt and qemu-iotests 068 can pass with
skipping iothread arguments.
I have tested that virtio-scsi-ccw works under tcg both with and without
iothread.
This patch fixes qemu-iotests 068, which was accidentally merged early
despite the dependency on ioeventfd.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20170704132350.11874-2-haoqf@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Commit f6f4ce4211 ("s390x: add property adapter_routes_max_batch",
2016-12-09) introduces a common realize (intended to be common for all
the subclasses) for flic, but fails to make sure the kvm-flic which had
its own is actually calling this common realize.
This omission fortunately does not result in a grave problem. The common
realize was only supposed to catch a possible programming mistake by
validating a value of a property set via the compat machine macros. Since
there was no programming mistake we don't need this fixed for stable.
Let's fix this problem by making sure kvm flic honors the realize of its
parent class.
Let us also improve on the error message we would hypothetically emit
when the validation fails.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: f6f4ce4211 ("s390x: add property adapter_routes_max_batch")
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
From the moment it was introduced by commit a2875e6f98 ("s390x/kvm:
implement floating-interrupt controller device", 2013-07-16) the kvm-flic
is not making realize fail properly in case it's impossible to create the
KVM device which basically serves as a backend and is absolutely
essential for having an operational kvm-flic.
Let's fix this by making sure we do proper error propagation in realize.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Fixes: a2875e6f98 "s390x/kvm: implement floating-interrupt controller device"
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Commit bab482d740 ("s390x/css: ccw translation infrastructure")
introduced instruction interception handler for different types of
subchannels. For emulated 3270 devices, we should assign the virtual
subchannel handler to them during device realization process, or 3270
will not work.
Fixes: bab482d740 ("s390x/css: ccw translation infrastructure")
Reviewed-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's vmstatify virtio_ccw_save_config and virtio_ccw_load_config for
flexibility (extending using subsections) and for fun.
To achieve this we need to hack the config_vector, which is VirtIODevice
(that is common virtio) state, in the middle of the VirtioCcwDevice state
representation. This is somewhat ugly, but we have no choice because the
stream format needs to be preserved.
Almost no changes in behavior. Exception is everything that comes with
vmstate like extra bookkeeping about what's in the stream, and maybe some
extra checks and better error reporting.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170703213414.94298-1-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
After converting to use DMA api for virtio devices, we should use
dma_as instead of address_space_memory. Otherwise it won't work if
IOMMU is enabled.
Fixes: commit 8607f5c307 ("virtio: convert to use DMA api")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1499170866-9068-1-git-send-email-jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
edu.c does not contain any target-specific code, so we can put
it into common-obj-y to compile it only once for all targets.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1498454578-18709-8-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_KVM is only defined for target-specific code, so nobody should
use it by accident in common code. To avoid such subtle bugs,
CONFIG_KVM is now marked as poisoned in common code. The header
include/sysemu/kvm.h is somewhat special since it is included
all over the place from common code, too, so we need some extra
logic via "#ifdef NEED_CPU_H" here to make sure that we can
compile all files without problems.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1498454578-18709-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pc.h and sysemu/kvm.h are also included from common code (where
CONFIG_KVM is not available), so the #defines that depend on CONFIG_KVM
should not be declared here to avoid that anybody is using them in a
wrong way. Since we're also going to poison CONFIG_KVM for common code,
let's move them to kvm_i386.h instead. Most of the dummy definitions
from sysemu/kvm.h are also unused since the code that uses them is
only compiled for CONFIG_KVM (e.g. target/i386/kvm.c), so the unused
defines are also simply dropped here instead of being moved.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1498454578-18709-3-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Gibson
Laurent Vivier
Daniel Henrique Barboza
Peter Maydell
Fan Zhang
Jason J. Herne
Yi Min Zhao
Halil Pasic
Fei Li
Claudio Imbrenda
Fam Zheng
Igor Mammedov
Alexey Kardashevskiy
Peng Hao
Pranith Kumar
Anton Nefedov
Alistair Francis
Eduardo Habkost
Aurelien Jarno
Alexander Graf
Joel Stanley
Krzysztof Kozlowski
Philippe Mathieu-Daudé
Cédric Le Goater
Greg Kurz
Juan Quintela
Alex Williamson
Anoob Soman
Ross Lagerwall
Stefano Stabellini
Thomas Huth
QingFeng Hao
Dong Jia Shi
Paolo Bonzini
Jason Wang