This has been a tcg-specific function, but is also in use
by hardware accelerators via physmem.c. This can cause
link errors when tcg is disabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214140314.18544-3-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LLVM/Clang, supports runtime checks for forward-edge Control-Flow
Integrity (CFI).
CFI on indirect function calls (cfi-icall) ensures that, in indirect
function calls, the function called is of the right signature for the
pointer type defined at compile time.
For this check to work, the code must always respect the function
signature when using function pointer, the function must be defined
at compile time, and be compiled with link-time optimization.
This rules out, for example, shared libraries that are dynamically loaded
(given that functions are not known at compile time), and code that is
dynamically generated at run-time.
This patch:
1) Introduces the CONFIG_CFI flag to support cfi in QEMU
2) Introduces a decorator to allow the definition of "sensitive"
functions, where a non-instrumented function may be called at runtime
through a pointer. The decorator will take care of disabling cfi-icall
checks on such functions, when cfi is enabled.
3) Marks functions currently in QEMU that exhibit such behavior,
in particular:
- The function in TCG that calls pre-compiled TBs
- The function in TCI that interprets instructions
- Functions in the plugin infrastructures that jump to callbacks
- Functions in util that directly call a signal handler
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org
Message-Id: <20201204230615.2392-3-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QString supports modifying its string, but it's quite limited: you can
only append. The remaining callers use it for building an initial
string, never for modifying it later.
Change keyval_parse_one() to do build the initial string with GString.
This is another step towards making QString immutable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-19-armbru@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A QemuOptsList can be of one of two kinds: either it is pre-validated, or
it accepts any key and validation happens somewhere else (typically in
a Visitor or against a list of QOM properties). opts_accepts_any
returns true if a QemuOpts instance was created from a QemuOptsList of
the latter kind, but there is no function to do the check on a QemuOptsList.
Since this property comes from the QemuOptsList and almost all callers of
opts_accepts_any use opts->list anyway, modify the function to accept
QemuOptsList.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use strcspn to find an equal or comma value, and pass the result directly
to get_opt_name to avoid another strchr.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_opts_set is used to create default network backends and to
parse sugar options -kernel, -initrd, -append, -bios and -dtb.
These are very different uses:
I would *expect* a function named qemu_opts_set to set an option in a
merge-lists QemuOptsList, such as -kernel, and possibly to set an option
in a non-merge-lists QemuOptsList with non-NULL id, similar to -set.
However, it wouldn't *work* to use qemu_opts_set for the latter
because qemu_opts_set uses fail_if_exists==1. So, for non-merge-lists
QemuOptsList and non-NULL id, the semantics of qemu_opts_set (fail if the
(QemuOptsList, id) pair already exists) are debatable.
On the other hand, I would not expect qemu_opts_set to create a
non-merge-lists QemuOpts with a single option; which it does, though.
For this case of non-merge-lists QemuOptsList and NULL id, qemu_opts_set
hardly adds value over qemu_opts_parse. It does skip some parsing and
unescaping, but that's not needed when creating default network
backends.
So qemu_opts_set has warty behavior for non-merge-lists QemuOptsList
if id is non-NULL, and it's mostly pointless if id is NULL. My
solution to keeping the API as simple as possible is to limit
qemu_opts_set to merge-lists QemuOptsList. For them, it's useful (we
don't want comma-unescaping for -kernel) *and* has sane semantics.
Network backend creation is switched to qemu_opts_parse.
qemu_opts_set is now only used on merge-lists QemuOptsList... except
in the testcase, which is changed to use a merge-list QemuOptsList.
With this change we can also remove the id parameter. With the
parameter always NULL, we know that qemu_opts_create cannot fail
and can pass &error_abort to it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
contrib/plugins/hotblocks.c
contrib/plugins/hotpages.c
contrib/plugins/howvec.c
contrib/plugins/lockstep.c
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/plugin/bb.c
tests/plugin/empty.c
tests/plugin/insn.c
tests/plugin/mem.c
tests/test-rcu-simpleq.c
tests/test-rcu-slist.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
contrib/plugins/, tests/plugin/, and tests/test-rcu-slist.c appear not
to include osdep.h intentionally. The remaining reverts are the same
as in commit bbfff19688.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113061216.2483385-1-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Fix Coverity CID 1435957: Memory - illegal accesses (OVERRUN):
>>> Overrunning array "suffixes" of 7 8-byte elements at element
index 7 (byte offset 63) using index "idx" (which evaluates to 7).
Note, the biggest input value freq_to_str() can accept is UINT64_MAX,
which is ~18.446 EHz, less than 1000 EHz.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20201101215755.2021421-1-f4bug@amsat.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, when using "nvme://" for a block device, like
-drive file=nvme://0000:01:00.0/1,if=none,id=drive0 \
-device virtio-blk,drive=drive0 \
VFIO may pin all guest memory, and discarding of RAM no longer works as
expected. I was able to reproduce this easily with my
01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd
NVMe SSD Controller SM981/PM981/PM983
Similar to common VFIO, we have to disable it, making sure that:
a) virtio-balloon won't discard any memory ("silently disabled")
b) virtio-mem and nvme:// run mutually exclusive
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201116105947.9194-1-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123624.19891-1-chetan4windows@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+i9YMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpySQH/Ru/sxB9PncR1HsqSf0HC0tt/EMKgyZTXEwQ
FITcjkCvBDS98a1VUvvZbjzTEDEZNnoUv94MjdLeBoptJ7GtK6nPoI6Ke0p1Zqbe
mlY2BCb0FpN8FE+mthjAI03mhw6o8Qo/OPtyISQzUxCVVqUHL5TRAVAQdeidoK8n
RBQ4WogwM/h7wI0d9GGgSxAON8IRQnBYImtzJieBb6zeScwKVFTWI1tqBdOyFN0/
AhzQiNZuhZ7a1XGJIsxmWB1NK2kcXNJuOF0ANh4coIHR0JzmH3xRy+Jnf5e3dYsw
LI23DUZPSTJJXAwKPucyTG7RTX8F55N9DVHC9KDRD6Ntq1oreJ4=
=pcbN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,virtio: fixes
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 04 Nov 2020 18:40:03 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
contrib/vhost-user-blk: fix get_config() information leak
block/export: fix vhost-user-blk get_config() information leak
block/export: make vhost-user-blk config space little-endian
configure: introduce --enable-vhost-user-blk-server
libvhost-user: follow QEMU comment style
vhost-blk: set features before setting inflight feature
Revert "vhost-blk: set features before setting inflight feature"
net: Add vhost-vdpa in show_netdevs()
vhost-vdpa: Add qemu_close in vhost_vdpa_cleanup
vfio: Don't issue full 2^64 unmap
virtio-iommu: Set supported page size mask
vfio: Set IOMMU page size as per host supported page size
memory: Add interface to set iommu page size mask
virtio-iommu: Add notify_flag_changed() memory region callback
virtio-iommu: Add replay() memory region callback
virtio-iommu: Call memory notifiers in attach/detach
virtio-iommu: Add memory notifiers for map/unmap
virtio-iommu: Store memory region in endpoint struct
virtio-iommu: Fix virtio_iommu_mr()
hw/smbios: Fix leaked fd in save_opt_one() error path
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OptsVisitor, StringInputVisitor and the keyval visitor have
three different ideas of how a human could write the value of
a boolean option. Pay homage to the backwards-compatibility
gods and make the new common helper accept all four sets (on/off,
true/false, y/n and yes/no), but remove case-insensitivity.
Since OptsVisitor is supposed to match qemu-options, adjust
it as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201103161339.447118-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The assert() was added in commit b681a1c73e ("block: Repair the
throttling code."), when the qemu_co_queue_do_restart() function
required to be running in a coroutine. It was later made unnecessary in
commit a9d9235567 ("coroutine-lock: reschedule coroutine on the
AioContext it was running on").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201027133602.3038018-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make it possible to compile out the vhost-user-blk server. It is enabled
by default on Linux.
Note that vhost-user-server.c depends on libvhost-user, which requires
CONFIG_LINUX. The CONFIG_VHOST_USER dependency was erroneous since that
option controls vhost-user frontends (previously known as "master") and
not device backends (previously known as "slave").
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
mmap(2) states:
'offset' must be a multiple of the page size as returned
by sysconf(_SC_PAGE_SIZE).
Add an assertion to be sure we don't break this contract.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-8-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
The QEMU_VFIO_DEBUG definition is only modifiable at build-time.
Trace events can be enabled at run-time. As we prefer the latter,
convert qemu_vfio_dump_mappings() to use trace events instead
of fprintf().
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-7-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
For debugging purpose, trace where DMA regions are mapped.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-6-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
For debugging purpose, trace where a BAR is mapped.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-5-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
For debug purpose, trace BAR regions info.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
We sometime get kernel panic with some devices on Aarch64
hosts. Alex Williamson suggests it might be broken PCIe
root complex. Add trace event to record the latest I/O
access before crashing. In case, assert our accesses are
aligned.
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-3-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Change the confuse "VFIO IOMMU check failed" error message by
the explicit "VFIO IOMMU Type1 is not supported" once.
Example on POWER:
$ qemu-system-ppc64 -drive if=none,id=nvme0,file=nvme://0001:01:00.0/1,format=raw
qemu-system-ppc64: -drive if=none,id=nvme0,file=nvme://0001:01:00.0/1,format=raw: VFIO IOMMU Type1 is not supported
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201103020733.2303148-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Commit 9ce44e2ce2 "qmp: Move dispatcher to a coroutine" modified
aio_poll() in util/aio-posix.c to avoid an assertion failure. This
change is missing in util/aio-win32.c.
Apply the changes to util/aio-posix.c to util/aio-win32.c too.
This fixes an assertion failure on Windows whenever QEMU exits.
$ ./qemu-system-x86_64.exe -machine pc,accel=tcg -display gtk
**
ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion failed:
(in_aio_context_home_thread(ctx))
Bail out! ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion
failed: (in_aio_context_home_thread(ctx))
Fixes: 9ce44e2ce2 ("qmp: Move dispatcher to a coroutine")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201021064033.8600-1-vr_qemu@t-online.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Memory returned by get_relocated_path must be freed with
free or g_free depending on the path that the function
took; Coverity takes exception to this practice. The
fix lets caller use g_free as is standard in QEMU.
While at it, mention the requirements on the caller in
the doc comment.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The abstract socket namespace is a non-portable Linux extension. An
attempt to use it elsewhere should fail with ENOENT (the abstract
address looks like a "" pathname, which does not resolve). We report
this failure like
Failed to connect socket abc: No such file or directory
Tolerable, although ENOTSUP would be better.
However, introspection lies: it has @abstract regardless of host
support. Easy enough to fix: since Linux provides them since 2.2,
'if': 'defined(CONFIG_LINUX)' should do.
The above failure becomes
Parameter 'backend.data.addr.data.abstract' is unexpected
I consider this an improvement.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
unix_listen_saddr() replaces empty @path by unique value. It obtains
the value by creating and deleting a unique temporary file with
mkstemp(). This is racy, as the comment explains. It's also entirely
undocumented as far as I can tell. Goes back to commit d247d25f18
"sockets: helper functions for qemu (Gerd Hoffman)", v0.10.0.
Since abstract socket addresses have no connection with filesystem
pathnames, making them up with mkstemp() seems inappropriate. Bypass
the replacement of empty @path.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 776b97d360 "qemu-sockets: add abstract UNIX domain socket
support" neglected to update socket_sockaddr_to_address_unix(). The
function returns a non-abstract socket address for abstract
sockets (wrong) with a null @path (also wrong; a non-optional QAPI str
member must never be null).
The null @path is due to confused code going back all the way to
commit 17c55decec "sockets: add helpers for creating SocketAddress
from a socket".
Add the required special case, and simplify the confused code.
Fixes: 776b97d360
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
An optional bool member of a QAPI struct can be false, true, or absent.
The previous commit demonstrated that socket_listen() and
socket_connect() are broken for absent @tight, and indeed QMP chardev-
add also defaults absent member @tight to false instead of true.
In C, QAPI members are represented by two fields, has_MEMBER and MEMBER.
We have:
has_MEMBER MEMBER
false true false
true true true
absent false false/ignore
When has_MEMBER is false, MEMBER should be set to false on write, and
ignored on read.
For QMP, the QAPI visitors handle absent @tight by setting both
@has_tight and @tight to false. unix_listen_saddr() and
unix_connect_saddr() however use @tight only, disregarding @has_tight.
This is wrong and means that absent @tight defaults to false whereas it
should default to true.
The same is true for @has_abstract, though @abstract defaults to
false and therefore has the same behavior for all of QMP, HMP and CLI.
Fix unix_listen_saddr() and unix_connect_saddr() to check
@has_abstract/@has_tight, and to default absent @tight to true.
However, this is only half of the story. HMP chardev-add and CLI
-chardev so far correctly defaulted @tight to true, but defaults to
false again with the above fix for HMP and CLI. In fact, the "tight"
and "abstract" options now break completely.
Digging deeper, we find that qemu_chr_parse_socket() also ignores
@has_tight, leaving it false when it sets @tight. That is also wrong,
but the two wrongs cancelled out. Fix qemu_chr_parse_socket() to set
@has_tight and @has_abstract; writing testcases for HMP and CLI is left
for another day.
Fixes: 776b97d360
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reporting "Failed to connect socket" is essentially useless for a user
attempting to diagnose failure. It needs to include the target address
details. Similarly when failing to create a socket we should include the
socket family info, so the user understands what particular feature was
missing in their kernel build (IPv6, VSock in particular).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want missing symbols fail module load right away instead of having
qemu abort later on in case lazy binding fails. Can happen -- for
example -- when trying to load a module for a pci device
(virtio-gpu-pci) into a qemu without pci support (qemu-system-avr).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201028054944.5772-1-kraxel@redhat.com
Build virtio-gpu vga devices modular. Must be a separate module because
not all qemu softmmu variants come with VGA support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201023064618.21409-3-kraxel@redhat.com
Build virtio-gpu pci devices modular. Must be a separate module because
not all qemu softmmu variants come with PCI support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201023064618.21409-2-kraxel@redhat.com
With upstream commit#ea1edcd7da1a "vl: relocate paths to data
directories", the data dir logic was unified between POSIX &
Win32. That patch moved to using 'get_relocated_path()', to
find the data dir. There is a latent bug in get_relocated_path
which can cause it to spin indefinitely, when the bind dir is
the same as the passed in dir (in this case, it was the data
dir).
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB08802BF242C429A15DDB32ACC01B0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't compile contrib/libvhost-user/libvhost-user.c again. Instead build
the static library once and then reuse it throughout QEMU.
Also switch from CONFIG_LINUX to CONFIG_VHOST_USER, which is what the
vhost-user tools (vhost-user-gpu, etc) do.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-14-stefanha@redhat.com
[Added CONFIG_LINUX again because libvhost-user doesn't build on macOS.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers used by other subsystems are located in include/. Also add the
vhost-user-server and vhost-user-blk-server headers to MAINTAINERS.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-13-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the new QAPI block exports API instead of defining our own QOM
objects.
This is a large change because the lifecycle of VuBlockDev needs to
follow BlockExportDriver. QOM properties are replaced by QAPI options
objects.
VuBlockDev is renamed VuBlkExport and contains a BlockExport field.
Several fields can be dropped since BlockExport already has equivalents.
The file names and meson build integration will be adjusted in a future
patch. libvhost-user should probably be built as a static library that
is linked into QEMU instead of as a .c file that results in duplicate
compilation.
The new command-line syntax is:
$ qemu-storage-daemon \
--blockdev file,node-name=drive0,filename=test.img \
--export vhost-user-blk,node-name=drive0,id=export0,unix-socket=/tmp/vhost-user-blk.sock
Note that unix-socket is optional because we may wish to accept chardevs
too in the future.
Markus noted that supported address families are not explicit in the
QAPI schema. It is unlikely that support for more address families will
be added since file descriptor passing is required and few address
families support it. If a new address family needs to be added, then the
QAPI 'features' syntax can be used to advertize them.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200924151549.913737-12-stefanha@redhat.com
[Skip test on big-endian host architectures because this device doesn't
support them yet (as already mentioned in a code comment).
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vu_client_trip() coroutine is leaked during AioContext switching. It
is also unsafe to destroy the vu_dev in panic_cb() since its callers
still access it in some cases.
Rework the lifecycle to solve these safety issues.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-10-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Unexpected EOF is an error that must be reported.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-9-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fds[] is leaked when qio_channel_readv_full() fails.
Use vmsg->fds[] instead of keeping a local fds[] array. Then we can
reuse goto fail to clean up fds. vmsg->fd_num must be zeroed before the
loop to make this safe.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-8-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The device panic notifier callback is not used. Drop it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Explicitly deleting watches is not necessary since libvhost-user calls
remove_watch() during vu_deinit(). Add an assertion to check this
though.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We already have access to the value with the correct type (ioc and sioc
are the same QIOChannel).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move the constants from hw/core/qdev-properties.c to
util/block-helpers.h so that knowledge of the min/max values is
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20200918080912.321299-5-coiby.xu@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sharing QEMU devices via vhost-user protocol.
Only one vhost-user client can connect to the server one time.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200918080912.321299-4-coiby.xu@gmail.com
[Fixed size_t %lu -> %zu format string compiler error.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Removes opengl dependency from core qemu. The number of shared
libraries for qemu-system-x86_64 goes down from 66 to 60 on my system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-15-kraxel@redhat.com
Allow modules depending on other modules.
module_load_file() gets the option to export symbols (by not adding the
G_MODULE_BIND_LOCAL flag).
module_load_one() will check the module dependency list to figure (a)
whenever are other modules must be loaded first, or (b) the module
should export the symbols.
The dependencies are specificed as static list in the source code for
now as I expect the list will stay small.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-11-kraxel@redhat.com
Introduce freq_to_str() to convert frequency values in human
friendly units using the SI units for Hertz.
Suggested-by: Luc Michel <luc@lmichel.fr>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-Id: <20201012095804.3335117-2-f4bug@amsat.org>
This adds a special meaning for 'help' and '?' as options to the keyval
parser. Instead of being an error (because of a missing value) or a
value for an implied key, they now request help, which is a new boolean
output of the parser in addition to the QDict.
A new parameter 'p_help' is added to keyval_parse() that contains on
return whether help was requested. If NULL is passed, requesting help
results in an error and all other cases work like before.
Turning previous error cases into help is a compatible extension. The
behaviour potentially changes for implied keys: They could previously
get 'help' as their value, which is now interpreted as requesting help.
This is not a problem in practice because 'help' and '?' are not a valid
values for the implied key of any option parsed with keyval_parse():
* audiodev: union Audiodev, implied key "driver" is enum AudiodevDriver,
"help" and "?" are not among its values
* display: union DisplayOptions, implied key "type" is enum
DisplayType, "help" and "?" are not among its values
* blockdev: union BlockdevOptions, implied key "driver is enum
BlockdevDriver, "help" and "?" are not among its values
* export: union BlockExport, implied key "type" is enum BlockExportType,
"help" and "?" are not among its values
* monitor: struct MonitorOptions, implied key "mode" is enum MonitorMode,
"help" and "?" are not among its values
* nbd-server: struct NbdServerOptions, no implied key.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201011073505.1185335-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous commit demonstrated documentation and code disagree on
parsing of ',' in the value of an implied key. Fix the code to match
the documentation.
This breaks uses of keyval_parse() that pass an implied key and accept
a value containing ','. None of the existing uses does:
* audiodev: implied key "driver" is enum AudiodevDriver, none of the
values contains ','
* display: implied key "type" is enum DisplayType, none of the values
contains ','
* blockdev: implied key "driver is enum BlockdevDriver, none of the
values contains ','
* export: implied key "type" is enum BlockExportType, none of the
values contains ','
* monitor: implied key "mode" is enum MonitorMode, none of the values
contains ','
* nbd-server: no implied key.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201011073505.1185335-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The grammar has a few issues:
* key-fragment = / [^=,.]* /
Prose restricts key fragments: they "must be valid QAPI names or
consist only of decimal digits". Technically, '' consists only of
decimal digits. The code rejects that. Fix the grammar.
* val = { / [^,]* / | ',,' }
Use + instead of *. Accepts the same language.
* val-no-key = / [^=,]* /
The code rejects an empty value. Fix the grammar.
* Section "Additional syntax for use with an implied key" is
confusing. Rewrite it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201011073505.1185335-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add mayfail bool parameter to module loading functions. Set it to true
for module_load_qom_all() because device modules might not load into all
system emulation variants. qemu-system-s390x for example will not load
qxl because it lacks vga support. Makes "make check" less chatty.
Drop module_loaded_qom_all check in module_load_qom_one to make sure we
see errors for explicit load requests, i.e. module_load_qom_one("qxl")
failing will log an error no matter whenever module_load_qom_all() was
called before or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200923091217.22662-1-kraxel@redhat.com
We remove the CONFIG_LOCALTIME_R detection option in configure, and move the check
existence of gmtime_r from configure into C header and source directly by using macro
`_POSIX_THREAD_SAFE_FUNCTIONS`.
Before this patch, the configure script are always assume the compiler doesn't define
_POSIX_C_SOURCE macro at all, but that's not true, because thirdparty library such
as ncursesw may define -D_POSIX_C_SOURCE in it's pkg-config file. And that C Flags will
added -D_POSIX_C_SOURCE into each QEMU_CFLAGS. And that's causing the following compiling error:
n file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../softmmu/main.c:25:
C:/work/xemu/qemu/include/sysemu/os-win32.h:53:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
53 | struct tm *gmtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../softmmu/main.c:25:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:284:36: note: previous definition of 'gmtime_r' was here
284 | __forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../softmmu/main.c:25:
C:/work/xemu/qemu/include/sysemu/os-win32.h:55:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
55 | struct tm *localtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../softmmu/main.c:25:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:281:36: note: previous definition of 'localtime_r' was here
281 | __forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~~~~
Compiling C object libcommon.fa.p/hw_gpio_zaurus.c.obj
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../hw/i2c/smbus_slave.c:16:
C:/work/xemu/qemu/include/sysemu/os-win32.h:53:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
53 | struct tm *gmtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../hw/i2c/smbus_slave.c:16:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:284:36: note: previous definition of 'gmtime_r' was here
284 | __forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:119,
from ../hw/i2c/smbus_slave.c:16:
C:/work/xemu/qemu/include/sysemu/os-win32.h:55:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
55 | struct tm *localtime_r(const time_t *timep, struct tm *result);
| ^~~~~~~~~~~
In file included from C:/work/xemu/qemu/include/qemu/osdep.h:94,
from ../hw/i2c/smbus_slave.c:16:
C:/CI-Tools/msys64/mingw64/x86_64-w64-mingw32/include/time.h:281:36: note: previous definition of 'localtime_r' was here
281 | __forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
| ^~~~~~~~~~~
Compiling C object libcommon.fa.p/hw_dma_xilinx_axidma.c.obj
After this patch, whenever ncursesw or other thirdparty libraries tried to define or not
define _POSIX_C_SOURCE, the source will building properly. Because now, we don't make any
assumption if _POSIX_C_SOURCE are defined. We solely relied on if the macro `_POSIX_THREAD_SAFE_FUNCTIONS`
are defined in msys2/mingw header.
The _POSIX_THREAD_SAFE_FUNCTIONS are defined in mingw header like this:
```
#if defined(_POSIX_C_SOURCE) && !defined(_POSIX_THREAD_SAFE_FUNCTIONS)
#define _POSIX_THREAD_SAFE_FUNCTIONS 200112L
#endif
#ifdef _POSIX_THREAD_SAFE_FUNCTIONS
__forceinline struct tm *__CRTDECL localtime_r(const time_t *_Time, struct tm *_Tm) {
return localtime_s(_Tm, _Time) ? NULL : _Tm;
}
__forceinline struct tm *__CRTDECL gmtime_r(const time_t *_Time, struct tm *_Tm) {
return gmtime_s(_Tm, _Time) ? NULL : _Tm;
}
__forceinline char *__CRTDECL ctime_r(const time_t *_Time, char *_Str) {
return ctime_s(_Str, 0x7fffffff, _Time) ? NULL : _Str;
}
__forceinline char *__CRTDECL asctime_r(const struct tm *_Tm, char * _Str) {
return asctime_s(_Str, 0x7fffffff, _Tm) ? NULL : _Str;
}
#endif
```
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201012234348.1427-5-luoyonggang@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a function that can be used to move the currently running coroutine
to a different AioContext (and therefore potentially a different
thread).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201005155855.256490-12-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This moves the QMP dispatcher to a coroutine and runs all QMP command
handlers that declare 'coroutine': true in coroutine context so they
can avoid blocking the main loop while doing I/O or waiting for other
events.
For commands that are not declared safe to run in a coroutine, the
dispatcher drops out of coroutine context by calling the QMP command
handler from a bottom half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201005155855.256490-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The new interface starts unused, will start being used by the
next patches.
It provides methods for each accelerator to start a vcpu, kick a vcpu,
synchronize state, get cpu virtual clock and elapsed ticks.
In qemu_wait_io_event, make it clear that APC is used only for HAX
on Windows.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce the qemu_vfio_find_fixed/temp_iova helpers which
respectively allocate IOVAs from the bottom/top parts of the
usable IOVA range, without picking within host IOVA reserved
windows. The allocation remains basic: if the size is too big
for the remaining of the current usable IOVA range, we jump
to the next one, leaving a hole in the address map.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200929085550.30926-3-eric.auger@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The IOVA allocator currently ignores host reserved regions.
As a result some chosen IOVAs may collide with some of them,
resulting in VFIO MAP_DMA errors later on. This happens on ARM
where the MSI reserved window quickly is encountered:
[0x8000000, 0x8100000]. since 5.4 kernel, VFIO returns the usable
IOVA regions. So let's enumerate them in the prospect to avoid
them, later on.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200929085550.30926-2-eric.auger@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pages are currently mapped READ/WRITE. To be able to use different
protections, add a new argument to qemu_vfio_pci_map_bar().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200922083821.578519-2-philmd@redhat.com>
Add the function that will compute a relocated version of the
directories in CONFIG_QEMU_*DIR and CONFIG_QEMU_*PATH.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the exec_dir cannot be retrieved, just assume it's the installation
directory that was specified at configure time. This makes it simpler
to reason about what the callers will do if they get back an empty
path.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just return the directory without requiring the caller to free it.
This also removes a bogus check for NULL in os_find_datadir and
module_load_one; g_strdup of a static variable cannot return NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dumping one line of hexadecimal/ASCII from a buffer is often needed.
Move this part from qemu_hexdump() and use it
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-2-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
npfd keeps track of how many pollfds are currently being monitored. It
must be reset to 0 when fdmon_poll_wait() returns.
When npfd reaches a treshold we switch to fdmon-epoll because it scales
better.
This patch resets npfd in the case where we switch to fdmon-epoll.
Forgetting to do so results in the following assertion failure:
util/fdmon-poll.c:65: fdmon_poll_wait: Assertion `npfd == 0' failed.
Fixes: 1f050a4690 ("aio-posix: extract ppoll(2) and epoll(7) fd monitoring")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1869952
Message-Id: <20200915120339.702938-2-stefanha@redhat.com>
The iov_discard_front/back() operations are useful for parsing iovecs
but they modify the array elements. If the original array is needed
after parsing finishes there is currently no way to restore it.
Although g_memdup() can be used before performing destructive
iov_discard_front/back() operations, this is inefficient.
Introduce iov_discard_undo() to restore the array to the state prior to
an iov_discard_front/back() operation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200917094455.822379-2-stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the util folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-6-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* Some minor qtest improvements
* Fix the unit tests to work on MSYS2, too
* Enable building and testing on MSYS2 in the Cirrus-CI
* Build FreeBSD with one task again in the Cirrus-CI
-----BEGIN PGP SIGNATURE-----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=ErBp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-09-16' into staging
* Fix "readlink -f" problem in iotests on macOS (to fix the Cirrus-CI tests)
* Some minor qtest improvements
* Fix the unit tests to work on MSYS2, too
* Enable building and testing on MSYS2 in the Cirrus-CI
* Build FreeBSD with one task again in the Cirrus-CI
# gpg: Signature made Wed 16 Sep 2020 12:24:29 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-09-16: (24 commits)
cirrus: Building freebsd in a single shot
ci: Enable msys2 ci in cirrus
tests: Fixes test-qdev-global-props.c
tests: fix test-util-sockets.c
tests: Fixes test-io-channel-file by mask only owner file state mask bits
tests: fixes aio-win32 about aio_remove_fd_handler, get it consistence with aio-posix.c
tests: Fixes test-io-channel-socket.c tests under msys2/mingw
vmstate: Fixes test-vmstate.c on msys2/mingw
meson: remove empty else and duplicated gio deps
meson: Use -b to ignore CR vs. CR-LF issues on Windows
osdep: file locking functions are not available on Win32
tests: test-replication disable /replication/secondary/* on msys2/mingw.
tests: Fixes test-replication.c on msys2/mingw.
meson: disable crypto tests are empty under win32
meson: Disable test-char on msys2/mingw for fixing tests stuck
rcu: fixes test-logging.c by call drain_call_rcu before rmdir_full
tests: Convert g_free to g_autofree macro in test-logging.c
rcu: Implement drain_call_rcu
qga/commands-win32: Fix problem with redundant protype declaration
Simplify the .gitignore file
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A common error scenario is to tell QEMU to use O_DIRECT in combination
with a filesystem that doesn't support it. To aid users to diagnosing
their mistake we want to provide a clear error message when this happens.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu_open_old() works like open(): set errno and return -1 on failure.
It has even more failure modes, though. Reporting the error clearly
to users is basically impossible for many of them.
Our standard cure for "errno is too coarse" is the Error object.
Introduce two new helper methods:
int qemu_open(const char *name, int flags, Error **errp);
int qemu_create(const char *name, int flags, mode_t mode, Error **errp);
Note that with this design we no longer require or even accept the
O_CREAT flag. Avoiding overloading the two distinct operations
means we can avoid variable arguments which would prevent 'errp' from
being the last argument. It also gives us a guarantee that the 'mode' is
given when creating files, avoiding a latent security bug.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of relying on the limited information from errno, we can now
also provide detailed error messages to callers that ask for it.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This simple refactoring prepares for future patches. The variadic args
handling is split from the main bulk of the open logic.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're going to have multiple callers to open() from qemu_open()
soon. Readability would thus benefit from having a helper for
dealing with O_CLOEXEC.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently code has to call monitor_fdset_get_fd, then dup
the return fd, and then add the duplicate FD back into the
fdset. This dance is overly verbose for the caller and
introduces extra failure modes which can be avoided by
folding all the logic into monitor_fdset_dup_fd_add and
removing monitor_fdset_get_fd entirely.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow is to preserve the semantics of hmp_device_del,
that the device is deleted immediatly which was changed by previos
patch that delayed this to RCU callback
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200915121318.247-2-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Only build virtio-gpu-device modular (the code which actually depends on
the external virglrenderer library). virtio-gpu-pci and virtio-vga are
compiled into core qemu still.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200914134224.29769-7-kraxel@redhat.com
qemu_hexdump()'s pointer to the buffer and length of the
buffer are closely related arguments but are widely separated
in the argument list order (also, the format of <stdio.h>
function prototypes is usually to have the FILE* argument
coming first).
Reorder the arguments as "fp, prefix, buf, size" which is
more logical.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200822180950.1343963-3-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Most uses of qemu_hexdump() do not take an array of char
as input, forcing use of cast. Since we can use this
helper to dump any kind of buffer, use a pointer to void
argument instead.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200822180950.1343963-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The linker of MinGW sometimes runs into the following problem:
libqemuutil.a(util_main-loop.c.obj): In function `qemu_fd_register':
/builds/huth/qemu/build/../util/main-loop.c:331: multiple definition of
`qemu_fd_register'
libqemuutil.a(stubs_fd-register.c.obj):/builds/huth/qemu/stubs/fd-register.c:5:
first defined here
collect2: error: ld returned 1 exit status
/builds/huth/qemu/rules.mak:88: recipe for target 'tests/test-timed-average.exe'
failed
qemu_fd_register() is defined in util/main-loop.c for WIN32, so let's simply
move the stub also there in the #else part of the corresponding #ifndef
to fix this problem.
Message-Id: <20200903054503.425435-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some 'qemu_vfio_*' trace events sizes are displayed using
decimal notation, other using hexadecimal notation:
qemu_vfio_ram_block_added s 0xaaaaf2448d90 host 0xffff5bc00000 size 0x4000000
qemu_vfio_dma_map s 0xaaaaf2448d90 host 0xffff5bc00000 size 67108864 temporary 0 iova (nil)
qemu_vfio_find_mapping s 0xaaaaf2448d90 host 0xffff5bc00000
qemu_vfio_new_mapping s 0xaaaaf2448d90 host 0xffff5bc00000 size 67108864 index 4 iova 0x114000
qemu_vfio_do_mapping s 0xaaaaf2448d90 host 0xffff5bc00000 size 67108864 iova 0x114000
As it is hard to follow, unify using hexadecimal for all sizes:
qemu_vfio_ram_block_added s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000
qemu_vfio_dma_map s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000 temporary 0 iova (nil)
qemu_vfio_find_mapping s 0xaaaaf1c60d90 host 0xffff2bc00000
qemu_vfio_new_mapping s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000 index 4 iova 0x114000
qemu_vfio_do_mapping s 0xaaaaf1c60d90 host 0xffff2bc00000 size 0x4000000 iova 0x114000
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200820171006.1140228-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove the second 'and' introduced in commit 418026ca43
("util: Introduce vfio helpers").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200811151643.21293-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove the second 'and' introduced in commit e81f86790f ("qemu-timer:
avoid checkpoints for virtual clock timers in external subsystems").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200811151643.21293-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
libqemuutil.a build fails with this error:
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `get_sqe':
qemu/build/../util/fdmon-io_uring.c:83: undefined reference to `io_uring_get_sqe'
/usr/bin/ld: qemu/build/../util/fdmon-io_uring.c:92: undefined reference to `io_uring_submit'
/usr/bin/ld: qemu/build/../util/fdmon-io_uring.c:96: undefined reference to `io_uring_get_sqe'
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `fdmon_io_uring_wait':
qemu/build/../util/fdmon-io_uring.c:289: undefined reference to `io_uring_submit_and_wait'
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `fdmon_io_uring_setup':
qemu/build/../util/fdmon-io_uring.c:328: undefined reference to `io_uring_queue_init'
/usr/bin/ld: libqemuutil.a(util_fdmon-io_uring.c.o): in function `fdmon_io_uring_destroy':
qemu/build/../util/fdmon-io_uring.c:343: undefined reference to `io_uring_queue_exit'
collect2: error: ld returned 1 exit status
This patch fix the issue adding 'linux_io_uring' dependency for
fdmon-io_uring.c
Fixes: a81df1b68b ("libqemuutil, qapi, trace: convert to meson")
Cc: pbonzini@redhat.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200821154853.94379-1-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the create-config logic to meson.build; create a
configuration_data object and let meson handle the
quoting and output.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Polling only monitors the ctx->notified field and does not need the
ctx->notifier EventNotifier to be signalled. Keep ctx->aio_notify_me
disabled while polling to avoid unnecessary EventNotifier syscalls.
This optimization improves virtio-blk 4KB random read performance by
18%. The following results are with an IOThread and the null-co block
driver:
Test IOPS Error
Before 244518.62 ± 1.20%
After 290706.11 ± 0.44%
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806131802.569478-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_notify() does not set ctx->notified when called with
ctx->aio_notify_me disabled. Therefore aio_notify_me needs to be enabled
during polling.
This is suboptimal since expensive event_notifier_set(&ctx->notifier)
and event_notifier_test_and_clear(&ctx->notifier) calls are required
when ctx->aio_notify_me is enabled.
Change aio_notify() so that aio->notified is always set, regardless of
ctx->aio_notify_me. This will make polling cheaper since
ctx->aio_notify_me can remain disabled. Move the
event_notifier_test_and_clear() to the fd handler function (which is now
no longer an empty function so "dummy" has been dropped from its name).
The next patch takes advantage of this by optimizing polling in
util/aio-posix.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806131802.569478-3-stefanha@redhat.com
[Paolo Bonzini pointed out that the smp_wmb() in aio_notify_accept()
should be smp_wb() but the comment should be smp_wmb() instead of
smp_wb(). Fixed.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The event_notifier_*() prefix can be confused with the EventNotifier
APIs that are also called event_notifier_*().
Rename the functions to aio_context_notifier_*() to make it clear that
they relate to the AioContext::notifier field.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200806131802.569478-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compile tested only.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20200724064509.331-6-alex.bennee@linaro.org>
This will be used in a future patch. For POSIX systems _SC_PHYS_PAGES
isn't standardised but at least appears in the man pages for
Open/FreeBSD. The result is advisory so any users of it shouldn't just
fail if we can't work it out.
The win32 stub currently returns 0 until someone with a Windows system
can develop and test a patch.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Message-Id: <20200724064509.331-5-alex.bennee@linaro.org>
Just return in case module_load_qom_one(NULL) is called.
vga_interface_available() can do that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200720100352.2477-3-kraxel@redhat.com>
Implement qemu_get_thread_id() for OpenBSD hosts, using
getthrid().
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Brad Smith <brad@comstyle.com>
Message-id: CA+XhMqxD6gQDBaj8tX0CMEj3si7qYKsM8u1km47e_-U7MC37Pg@mail.gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tidied up commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_set_nonblock() checks that the file descriptor can be used and, if
not, crashes QEMU. An assert() is used for that. The use of assert() is
used to detect programming error and the coredump will allow to debug
the problem.
But in the case of the tap device, this assert() can be triggered by
a misconfiguration by the user. At startup, it's not a real problem, but it
can also happen during the hot-plug of a new device, and here it's a
problem because we can crash a perfectly healthy system.
For instance:
# ip link add link virbr0 name macvtap0 type macvtap mode bridge
# ip link set macvtap0 up
# TAP=/dev/tap$(ip -o link show macvtap0 | cut -d: -f1)
# qemu-system-x86_64 -machine q35 -device pcie-root-port,id=pcie-root-port-0 -monitor stdio 9<> $TAP
(qemu) netdev_add type=tap,id=hostnet0,vhost=on,fd=9
(qemu) device_add driver=virtio-net-pci,netdev=hostnet0,id=net0,bus=pcie-root-port-0
(qemu) device_del net0
(qemu) netdev_del hostnet0
(qemu) netdev_add type=tap,id=hostnet1,vhost=on,fd=9
qemu-system-x86_64: .../util/oslib-posix.c:247: qemu_set_nonblock: Assertion `f != -1' failed.
Aborted (core dumped)
To avoid that, add a function, qemu_try_set_nonblock(), that allows to report the
problem without crashing.
In the same way, we also update the function for vhostfd in net_init_tap_one() and
for fd in net_init_socket() (both descriptors are provided by the user and can
be wrong).
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This function offers operating system agnostic way to fetch host
name. It is implemented for both POSIX-like and Windows systems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Given this isn't perforance critical at all lets avoid the non-portable
d_type and use fstat instead to check whenever the file is a chardev.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-10-peter.maydell@linaro.org
Message-id: 20200701180302.14821-1-kraxel@redhat.com
[PMM: fixed comment style; tweaked subject line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qemu_init_exec_dir() function is inherently non-portable;
provide an implementation for Haiku hosts.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-9-peter.maydell@linaro.org
[PMM: Expanded commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
util/compatfd.c includes <sys/syscall.h> so that the CONFIG_SIGNALFD
code can use SYS_signalfd. Guard the #include with CONFIG_SIGNALFD
to avoid portability issues on hosts like Haiku which do not
provide that header file.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-8-peter.maydell@linaro.org
[PMM: Expanded commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Regularize our handling of <sys/signal.h>: currently we include it in
osdep.h, but only for OpenBSD, and we include it without an ifdef
guard in a couple of C files. This causes problems for Haiku, which
doesn't have that header.
Instead, check in configure whether sys/signal.h exists, and if it
does then always include it from osdep.h.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-5-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_SYS_SIGNAL_H]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of using an OS-specific ifdef test to select the "openpty()
is in pty.h" codepath, make configure check for the existence of
the header and use the new CONFIG_PTY instead.
This is necessary to build on Haiku, which also provides openpty()
via pty.h.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-3-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_PTY_H]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
GCC supports "#pragma GCC diagnostic" since version 4.6, and
Clang seems to support it, too, since its early versions 3.x.
That means that our minimum required compiler versions all support
this pragma already and we can remove the test from configure and
all the related #ifdefs in the code.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200710045515.25986-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl8J0yoACgkQ+9DbCVqe
KkSzTAf/Vn+9TU8Qt7nZvl7W4tz7Sy5K8EJGwj2RXx6CWWWLiFbsXurIM8Krw5Vc
RmvUxwa359b+J0lQpfeNDHYm1nM8RZLFlkG0a5bl0I8sW0EcPjBRtwNaGKXh2p0u
u2RS2QAi6A9AvYT4ZREYlBM+o9WzbxCEQm4s8fr6WEJCQfxBnb5/bGiEjWR64e8C
j9Kvou+zAKfVizbQMtu+mwqjsoPtcS1b3vVcO7anhNuUsuaEKkS0dFWzWvw3lwJR
STIYnb8Y/eJ1yKr0hPH2qtWv3n6yhlYvYmpUCH6AwshGMUoeFEzR2VoWS6yZPGG6
na6XA3UW5R9AxIDfkCJ5ueeo8t9xMQ==
=HRWa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging
Testing and misc build updates:
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
# gpg: Signature made Sat 11 Jul 2020 15:56:42 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits)
iotests: Set LC_ALL=C for sort
Revert "vga: build virtio-gpu as module"
tests: fix "make check-qtest" for modular builds
.cirrus.yml: add bash to the brew packages
tests/docker: update toolchain set in debian-xtensa-cross
tests/docker: fall back more gracefully when pull fails
docs: Add to gdbstub documentation the PhyMemMode
docs/devel: add some notes on tcg-icount for developers
docs/devel: convert and update MTTCG design document
tests/qht-bench: Adjust threshold computation
tests/qht-bench: Adjust testing rate by -1
travis.yml: Test also the other targets on s390x
shippable: pull images from registry instead of building
testing: add check-build target
containers.yml: build with docker.py tooling
gitlab: limit re-builds of the containers
tests: improve performance of device-introspect-test
gitlab: add avocado asset caching
gitlab: enable check-tcg for linux-user tests
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 8d5a24c83d.
Compiling all virtio-gpu objects into a single module isn't a good plan
because the individual objects have different CONFIG_* dependencies.
Leads to module load failures on s390x due to vga support being
disabled, which in turn breaks '-device virtio-gpu-device' (flagged by
travis ci).
So back to the drawing board for modular virtio-gpu ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710203652.9708-3-kraxel@redhat.com>
This is a cleanup patch to follow-up the patch which introduced TSAN.
This patch makes separate start_switch_fiber_ functions for TSAN and ASAN.
This does two things:
1. Unrelated ASAN and TSAN code is separate and each function only
has arguments that are actually needed.
2. The co->tsan_caller_fiber and co->tsan_co_fiber fields are only
access from within #ifdef CONFIG_TSAN.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626170001.27017-1-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-5-alex.bennee@linaro.org>
This is followup patch to the one submitted back in Oct, 19
https://lists.gnu.org/archive/html/qemu-devel/2019-10/msg02102.html
My mistake here, I took my eyes of the mailing list after I got the
initial thumbs up. This patch follows up on Markus comments in the
above link.
Purpose of this patch:
We want to print guest name for errors, warnings and info messages. This
was the first of two patches the second being MCE errors targeting a VM
with guest name prepended. But in a large fleet we see many other
errors that disable a VM or crash it. In a large fleet and centralized
logging having the guest name enables identify of owner and customer.
Signed-off-by: Mario Smarduch <msmarduch@digitalocean.com>
Message-Id: <20200626201900.8876-1-msmarduch@digitalocean.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
See recent commit "error: Document Error API usage rules" for
rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-14-armbru@redhat.com>
opt_set() frees its argument @value on failure. Slightly unclean;
functions ideally do nothing on failure.
To tidy this up, move opt_create() from opt_set() into its callers,
along with the cleanup. Rename opt_set() to opt_validate(), noting
its similarity to qemu_opts_validate(). Drop redundant parameter
@opts; use opt->opts instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-13-armbru@redhat.com>
There is just one use so far. The next commit will add more.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-12-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-11-armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-10-armbru@redhat.com>
This is to make the next commit easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-9-armbru@redhat.com>
Convert uses like
opts = qemu_opts_create(..., &err);
if (err) {
...
}
to
opts = qemu_opts_create(..., errp);
if (!opts) {
...
}
Eliminate error_propagate() that are now unnecessary. Delete @err
that are now unused.
Note that we can't drop parallels_open()'s error_propagate() here. We
continue to execute it even in the converted case. It's a no-op then:
local_err is null.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-8-armbru@redhat.com>
Add support for qom types provided by modules. For starters use a
manually maintained list which maps qom type to module and prefix.
Two load functions are added: One to load the module for a specific
type, and one to load all modules (needed for object/device lists as
printed by -- for example -- qemu -device help).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200624131045.14512-2-kraxel@redhat.com
Recent versions of Solaris (v11.4) now feature an openpty() function,
too, causing a build failure since we ship our own implementation of
openpty() for Solaris in util/qemu-openpty.c so far. Since there are
now both variants available in the wild, with and without this function
(and illumos is said to not have this function yet), let's introduce a
proper HAVE_OPENPTY define for this to fix the build failure.
Message-Id: <20200702143955.678-1-thuth@redhat.com>
Tested-by: Michele Denber <denber@mindspring.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
