Commit Graph

481 Commits

Author SHA1 Message Date
Marc-André Lureau
39ab61c6d0 char: remove explicit_fe_open, use a set_handlers argument
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:46:10 +02:00
Marc-André Lureau
c39860e6dc char: replace qemu_chr_claim/release with qemu_chr_fe_init/deinit
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.

The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:21 +02:00
Marc-André Lureau
5d300164d0 vhost-user: only initialize queue 0 CharBackend
All the queues share the same chardev. Initialize only the first queue
CharBackend, and pass it to other queues. This will allow to claim the
chardev only once in a later change.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-18-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:21 +02:00
Marc-André Lureau
5345fdb446 char: use qemu_chr_fe* functions with CharBackend argument
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:21 +02:00
Marc-André Lureau
fbf3cc3a67 colo: claim in find_and_check_chardev
This factors out claiming of chardev, and changes the call to
non-fatal to return an error like the rest of the chardev checks.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-15-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Marc-André Lureau
7fa47e2a80 char: rename some frontend functions
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by
frontend, so use qemu_chr_fe prefix.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Marc-André Lureau
32a6ebecd2 char: remaining switch to CharBackend in frontend
Similar to previous change, for the remaining CharDriverState front ends
users.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Marc-André Lureau
b4948be93e char: remove init callback
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Daniel P. Berrange
170f75ad80 trace: move colo trace events to net/ sub-directory
The colo patch series added various trace events to the top
level trace-events file, despite the files using them being
in a sub-dir.

  commit 30656b097e
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:34 2016 +0800

    filter-rewriter: rewrite tcp packet to keep secondary connection

  commit f4b618360e
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:31 2016 +0800

    colo-compare: add TCP, UDP, ICMP packet comparison

    We add TCP,UDP,ICMP packet comparison to replace
    IP packet comparison. This can increase the
    accuracy of the package comparison.
    Less checkpoint more efficiency.

    Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
    Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
    Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
    Signed-off-by: Jason Wang <jasowang@redhat.com>

  commit 0682e15b19
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:30 2016 +0800

    colo-compare: introduce packet comparison thread

  commit 59509ec16b
  Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
  Date:   Tue Sep 27 10:22:27 2016 +0800

    net/colo.c: add colo.c to define and handle packet

This moves all events into net/trace-events where they
were supposed to live.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12 09:35:53 +02:00
Peter Maydell
627eae7d72 virtio, pc: fixes and features
more guest error handling for virtio devices
 virtio migration rework
 pc fixes
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJX+tUfAAoJECgfDbjSjVRpIGMH/Ri+bnKF9zD6jQXfzYY+neSF
 SqR0BsFUqR+8C1Yxx45tFRC/kMpJy3n5PZunoDwAXcSlN/uoWvzp05/s44praFDc
 5FDcj3SvFhvOpBFnO5sTMBTkmGOCG/f/lnej+Fea0X8KjtOvVE6Yxek8CS+/dS3K
 t70hxLaTO93Z63olOxhAZSVX9wYKLovB0PXAu9Uj9LsnXl8o8gQLxM9WgKnI/0vD
 1V/ZGZY0lfFaHrvIgkgKy3/L7QJ91A/jU9jypNJOEdV52EDfkV97hA2ibcIQ+7Y1
 w/S3gzVmKM3dtxdS9DiQJ3riBT8XcPUWI6sIEjpfKGFGoOjazai3m9e3bcEx3Rg=
 =f//+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc: fixes and features

more guest error handling for virtio devices
virtio migration rework
pc fixes

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 10 Oct 2016 00:39:11 BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (33 commits)
  intel-iommu: Check IOAPIC's Trigger Mode against the one in IRTE
  virtio: cleanup VMSTATE_VIRTIO_DEVICE
  vhost-vsock: convert VMSTATE_VIRTIO_DEVICE
  virtio-rng: convert VMSTATE_VIRTIO_DEVICE
  virtio-balloon: convert VMSTATE_VIRTIO_DEVICE
  virtio-scsi: convert VMSTATE_VIRTIO_DEVICE
  virtio-input: convert VMSTATE_VIRTIO_DEVICE
  virtio-gpu: convert VMSTATE_VIRTIO_DEVICE
  virtio-serial: convert VMSTATE_VIRTIO_DEVICE
  virtio-9p: convert VMSTATE_VIRTIO_DEVICE
  virtio-net: convert VMSTATE_VIRTIO_DEVICE
  virtio-blk: convert VMSTATE_VIRTIO_DEVICE
  virtio: prepare change VMSTATE_VIRTIO_DEVICE macro
  net: don't poke at chardev internal QemuOpts
  virtio-scsi: handle virtio_scsi_set_config() error
  virtio-scsi: convert virtio_scsi_bad_req() to use virtio_error()
  virtio-net: handle virtio_net_flush_tx() errors
  virtio-net: handle virtio_net_receive() errors
  virtio-net: handle virtio_net_handle_ctrl() error
  virtio-blk: handle virtio_blk_handle_request() errors
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-10 16:23:40 +01:00
Daniel P. Berrange
0a73336d96 net: don't poke at chardev internal QemuOpts
The vhost-user & colo code is poking at the QemuOpts instance
in the CharDriverState struct, not realizing that it is valid
for this to be NULL. e.g. the following crash shows a codepath
where it will be NULL:

 Program terminated with signal SIGSEGV, Segmentation fault.
 #0  0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
 617         QTAILQ_FOREACH(opt, &opts->head, next) {
 [Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))]
 (gdb) bt
 #0  0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
 #1  0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314
 #2  0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360
 #3  0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051
 #4  0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108
 #5  0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186
 #6  0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205
 #7  0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978
 #8  0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105
 #9  0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319
 #10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369
 #11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124
 #12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994
 #13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387
 #14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399
 #15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927
 #16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84
 #17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
 #18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213
 #19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258
 #20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506
 #21 0x000055baf676587b in main_loop () at vl.c:1908
 #22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604
 (gdb) p opts
 $1 = (QemuOpts *) 0x0

The crash occurred when attaching vhost-user net via QMP:

{
    "execute": "chardev-add",
    "arguments": {
        "id": "charnet2",
        "backend": {
            "type": "socket",
            "data": {
                "addr": {
                    "type": "unix",
                    "data": {
                        "path": "/var/run/openvswitch/vhost-user1"
                    }
                },
                "wait": false,
                "server": false
            }
        }
    },
    "id": "libvirt-19"
}
{
    "return": {

    },
    "id": "libvirt-19"
}
{
    "execute": "netdev_add",
    "arguments": {
        "type": "vhost-user",
        "chardev": "charnet2",
        "id": "hostnet2"
    },
    "id": "libvirt-20"
}

Code using chardevs should not be poking at the internals of the
CharDriverState struct. What vhost-user wants is a chardev that is
operating as reconnectable network service, along with the ability
to do FD passing over the connection. The colo code simply wants
a network service. Add a feature concept to the char drivers so
that chardev users can query the actual features they wish to have
supported. The QemuOpts member is removed to prevent future mistakes
in this area.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10 01:46:29 +03:00
Zhang Chen
52cfcb4642 net/filter-mirror: Fix mirror initial check typo
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-08 11:25:29 +03:00
Peter Lieven
47f9f15831 net: limit allocation in nc_sendv_compat
we only need to allocate enough memory to hold the packet. This might be
less than NET_BUFSIZE. Additionally fail early if the packet is larger
than NET_BUFSIZE.

Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Alexey Kardashevskiy
584613eacb tap: Allow specifying a bridge
The tap backend is already using qemu-bridge-helper to attach tap
interface to a bridge but (unlike the bridge backend) it always uses
the default bridge name - br0.

This adds a "br" property support to the tap backend.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen
30656b097e filter-rewriter: rewrite tcp packet to keep secondary connection
We will rewrite tcp packet secondary received and sent.
When colo guest is a tcp server.

Firstly, client start a tcp handshake. the packet's seq=client_seq,
ack=0,flag=SYN. COLO primary guest get this pkt and mirror(filter-mirror)
to secondary guest, secondary get it use filter-redirector.
Then,primary guest response pkt
(seq=primary_seq,ack=client_seq+1,flag=ACK|SYN).
secondary guest response pkt
(seq=secondary_seq,ack=client_seq+1,flag=ACK|SYN).
In here,we use filter-rewriter save the secondary_seq to it's tcp connection.
Finally handshake,client send pkt
(seq=client_seq+1,ack=primary_seq+1,flag=ACK).
Here,filter-rewriter can get primary_seq, and rewrite ack from primary_seq+1
to secondary_seq+1, recalculate checksum. So the secondary tcp connection
kept good.

When we send/recv packet.
client send pkt(seq=client_seq+1+data_len,ack=primary_seq+1,flag=ACK|PSH).
filter-rewriter rewrite ack and send to secondary guest.

primary guest response pkt
(seq=primary_seq+1,ack=client_seq+1+data_len,flag=ACK)
secondary guest response pkt
(seq=secondary_seq+1,ack=client_seq+1+data_len,flag=ACK)
we rewrite secondary guest seq from secondary_seq+1 to primary_seq+1.
So tcp connection kept good.

In code We use offset( = secondary_seq - primary_seq )
to rewrite seq or ack.
handle_primary_tcp_pkt: tcp_pkt->th_ack += offset;
handle_secondary_tcp_pkt: tcp_pkt->th_seq -= offset;

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen
afe4612409 filter-rewriter: track connection and parse packet
We use net/colo.h to track connection and parse packet

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen
e6eee8ab51 filter-rewriter: introduce filter-rewriter initialization
Filter-rewriter is a part of COLO project.
It will rewrite some of secondary packet to make
secondary guest's tcp connection established successfully.
In this module we will rewrite tcp packet's ack to the secondary
from primary,and rewrite tcp packet's seq to the primary from
secondary.

usage:

colo secondary:
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
-object filter-rewriter,id=rew0,netdev=hn0,queue=all

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen
f4b618360e colo-compare: add TCP, UDP, ICMP packet comparison
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen
0682e15b19 colo-compare: introduce packet comparison thread
If primary packet is same with secondary packet,
we will send primary packet and drop secondary
packet, otherwise notify COLO frame to do checkpoint.
If primary packet comes but secondary packet does not,
after REGULAR_PACKET_CHECK_MS milliseconds we set
the primary packet as old_packet,then do a checkpoint.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Zhang Chen
b6540d403d colo-compare: track connection and enqueue packet
In this patch we use kernel jhash table to track
connection, and then enqueue net packet like this:

+ CompareState ++
|               |
+---------------+   +---------------+         +---------------+
|conn list      +--->conn           +--------->conn           |
+---------------+   +---------------+         +---------------+
|               |     |           |             |          |
+---------------+ +---v----+  +---v----+    +---v----+ +---v----+
                  |primary |  |secondary    |primary | |secondary
                  |packet  |  |packet  +    |packet  | |packet  +
                  +--------+  +--------+    +--------+ +--------+
                      |           |             |          |
                  +---v----+  +---v----+    +---v----+ +---v----+
                  |primary |  |secondary    |primary | |secondary
                  |packet  |  |packet  +    |packet  | |packet  +
                  +--------+  +--------+    +--------+ +--------+
                      |           |             |          |
                  +---v----+  +---v----+    +---v----+ +---v----+
                  |primary |  |secondary    |primary | |secondary
                  |packet  |  |packet  +    |packet  | |packet  +
                  +--------+  +--------+    +--------+ +--------+

We use conn_list to record connection info.
When we want to enqueue a packet, firstly get the
connection from connection_track_table. then push
the packet to g_queue(pri/sec) in it's own conn.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Zhang Chen
ccf0426c09 Jhash: add linux kernel jhashtable in qemu
Jhash will be used by colo-compare and filter-rewriter
to save and lookup net connection info

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Zhang Chen
59509ec16b net/colo.c: add colo.c to define and handle packet
The net/colo.c is used by colo-compare and filter-rewriter.
this can share common data structure like net packet,
and other functions.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Zhang Chen
7dce4e6fd2 colo-compare: introduce colo compare initialization
This a COLO net ascii figure:

 Primary qemu                                                           Secondary qemu
+--------------------------------------------------------------+       +----------------------------------------------------------------+
| +----------------------------------------------------------+ |       |  +-----------------------------------------------------------+ |
| |                                                          | |       |  |                                                           | |
| |                        guest                             | |       |  |                        guest                              | |
| |                                                          | |       |  |                                                           | |
| +-------^--------------------------+-----------------------+ |       |  +---------------------+--------+----------------------------+ |
|         |                          |                         |       |                        ^        |                              |
|         |                          |                         |       |                        |        |                              |
|         |  +------------------------------------------------------+  |                        |        |                              |
|netfilter|  |                       |                         |    |  |   netfilter            |        |                              |
| +----------+ +----------------------------+                  |    |  |  +-----------------------------------------------------------+ |
| |       |  |                       |      |        out       |    |  |  |                     |        |  filter excute order       | |
| |       |  |          +-----------------------------+        |    |  |  |                     |        | +------------------->      | |
| |       |  |          |            |      |         |        |    |  |  |                     |        |   TCP                      | |
| | +-----+--+-+  +-----v----+ +-----v----+ |pri +----+----+sec|    |  |  | +------------+  +---+----+---v+rewriter++  +------------+ | |
| | |          |  |          | |          | |in  |         |in |    |  |  | |            |  |        |              |  |            | | |
| | |  filter  |  |  filter  | |  filter  +------>  colo   <------+ +-------->  filter   +--> adjust |   adjust     +-->   filter   | | |
| | |  mirror  |  |redirector| |redirector| |    | compare |   |  |    |  | | redirector |  | ack    |   seq        |  | redirector | | |
| | |          |  |          | |          | |    |         |   |  |    |  | |            |  |        |              |  |            | | |
| | +----^-----+  +----+-----+ +----------+ |    +---------+   |  |    |  | +------------+  +--------+--------------+  +---+--------+ | |
| |      |   tx        |   rx           rx  |                  |  |    |  |            tx                        all       |  rx      | |
| |      |             |                    |                  |  |    |  +-----------------------------------------------------------+ |
| |      |             +--------------+     |                  |  |    |                                                   |            |
| |      |   filter excute order      |     |                  |  |    |                                                   |            |
| |      |  +---------------->        |     |                  |  +--------------------------------------------------------+            |
| +-----------------------------------------+                  |       |                                                                |
|        |                            |                        |       |                                                                |
+--------------------------------------------------------------+       +----------------------------------------------------------------+
         |guest receive               | guest send
         |                            |
+--------+----------------------------v------------------------+
|                                                              |                          NOTE: filter direction is rx/tx/all
|                         tap                                  |                          rx:receive packets sent to the netdev
|                                                              |                          tx:receive packets sent by the netdev
+--------------------------------------------------------------+

In COLO-compare, we do packet comparing job.
Packets coming from the primary char indev will be sent to outdev.
Packets coming from the secondary char dev will be dropped after comparing.
colo-comapre need two input chardev and one output chardev:
primary_in=chardev1-id (source: primary send packet)
secondary_in=chardev2-id (source: secondary send packet)
outdev=chardev3-id

usage:

primary:
-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
-chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait
-chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait
-chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait
-chardev socket,id=compare0-0,host=3.3.3.3,port=9001
-chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait
-chardev socket,id=compare_out0,host=3.3.3.3,port=9005
-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0
-object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out
-object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0
-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0

secondary:
-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown
-device e1000,netdev=hn0,mac=52:a4:00:12:78:66
-chardev socket,id=red0,host=3.3.3.3,port=9003
-chardev socket,id=red1,host=3.3.3.3,port=9004
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Shmulik Ladkani
a4543b1b37 net: hmp_host_net_remove: Del the -net option of the removed host_net
Upon hmp_host_net_remove(), the appropriate -net client is deleted
(according to the given vlan_id and device id), as well as the
corresponsing hub port.

However, the relevant '-net' option that was added by former
hmp_host_net_add() call is still present in "net" options group.

This makes the following legit HMP sequence erroneous:

(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
(qemu) host_net_remove 1 n1
(qemu) host_net_add tap id=n1,ifname=tap1,script=no,downscript=no,vlan=1
Duplicate ID 'n1' for net

Fix, by deleting the stored '-net' option associated with the given
device id.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Marc-André Lureau
883e4f7624 Change net/socket.c to use socket_*() functions
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch  performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. The task was
listed on http://wiki.qemu.org/BiteSizedTasks page.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-14 12:25:14 +02:00
Igor Mammedov
3b8c1761f0 qtail: clean up direct access to tqe_prev field
instead of accessing tqe_prev field dircetly outside
of queue.h use macros to check if element is in list
and make sure that afer element is removed from list
tqe_prev field could be used to do the same check.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:08:41 +02:00
Paolo Bonzini
616018352c Revert "Change net/socket.c to use socket_*() functions"
Since commit 7e8449594c, the socket connect code is blocking, because
calling socket_connect() without callback is blocking.  This reverts the
commit.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-30 16:28:46 +02:00
Marc-André Lureau
67f3280c06 slirp: fix segv when init failed
Since commit f6c2e66ae8, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:

==18447== Invalid write of size 8
==18447==    at 0x7EF2B5: notifier_remove (notify.c:32)
==18447==    by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447==    by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447==    by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447==    by 0x69445B: qemu_del_net_client (net.c:401)
==18447==    by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447==    by 0x6A4241: net_init_slirp (slirp.c:865)
==18447==    by 0x695C6D: net_client_init1 (net.c:1051)
==18447==    by 0x695F6E: net_client_init (net.c:1108)
==18447==    by 0x696DBA: net_init_netdev (net.c:1498)
==18447==    by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447==    by 0x696E60: net_init_clients (net.c:1516)
==18447==  Address 0x0 is not stack'd, malloc'd or (recently) free'd

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-22 15:20:32 +08:00
Zhang Chen
e9e0a5854b net/net: properly handle multiple packets in net_fill_rstate()
When network is busy, we will receive multiple packets at one time. In
that situation, we should keep trying to do the receiving instead of
finalizing only the first packet.

Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-18 12:20:57 +08:00
Laurent Vivier
e723b87103 trace-events: fix first line comment in trace-events
Documentation is docs/tracing.txt instead of docs/trace-events.txt.

find . -name trace-events -exec \
     sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
     {} \;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-12 10:36:01 +01:00
Marc-André Lureau
c89804d674 vhost-user: wait until backend init is completed
The chardev waits for an initial connection before starting qemu, and
vhost-user should wait for the backend negotiation to be completed
before starting qemu too.

vhost-user is started in the net_vhost_user_event callback, which is
synchronously called after the socket is connected. Use a
VhostUserState.started flag to indicate vhost-user init completed
successfully and qemu can be started.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:49 +03:00
Marc-André Lureau
1a5b68cee8 vhost-user: add get_vhost_net() assertions
Add a few assertions to be more explicit about the runtime behaviour
after the previous patch: get_vhost_net() is non-null after
net_vhost_user_init().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:48 +03:00
Marc-André Lureau
e6bcb1b617 vhost-user: keep vhost_net after a disconnection
Many code paths assume get_vhost_net() returns non-null.

Keep VhostUserState.vhost_net after a successful vhost_net_init(),
instead of freeing it in vhost_net_cleanup().

VhostUserState.vhost_net is thus freed before after being recreated or
on final vhost_user_cleanup() and there is no need to save the acked
features.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:48 +03:00
Marc-André Lureau
9c7d18b3a5 vhost-user: disconnect on HUP
In some cases, qemu_chr_fe_read_all() on HUP event doesn't raise
CHR_EVENT_CLOSED because the read/recv function returns -1 on
disconnected peers (for example with tch_chr_recv, an ECONNRESET errno
overwritten as EIO).

It is simpler to explicitely disconnect on HUP, rising CHR_EVENT_CLOSED
if it wasn't disconnected already.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:46 +03:00
Marc-André Lureau
d9d261142d vhost-user: minor simplification
Shorten the code and make it more clear by using the specialized
function g_str_has_prefix().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29 00:33:46 +03:00
Peter Maydell
3b2e6798ff QAPI patches for 2016-07-19
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXjnLvAAoJEDhwtADrkYZTkd0P/iVsviq3WwxjmpbjyYDqgBYl
 2hj9XL8ZtYGwFIU9WZXdu16lXlXtZom9u8XzspXIvhy5McNeWDxYarbE2kByyjac
 rl4873YzIspVKPPFMl2LWsHwtq7LLGzFF+f+ofjHN81ZdM6qTwZBe00gxxY8281I
 6x1aQYkhOAmqJAlqqnEVk76WtdScs23mdbqmy1LzGD3ZBKvDa8IasogAKvZquNZX
 P16kYdq9QFqFJ30non9fWg9VQWtdryisseVhpSY/PXlrM4H+XPDK4hvegr3pjN8S
 yqtmKkPOuVWQyCfRz6UWBP0ncz3QN7iOiVLqb6TJgxJ8jFp3lbEEsXsCkvpSWjOU
 JDFOcGuiE1AVoZF8NxWQ3fdLiHt2jyCgY7iqgbNc1A3eT2H5IshIc7OF5QOU7MtP
 EYqk5bXiusUftuvZE5Mh0pXJ5AeOEOoXM+/dGRt3IRxPtqOWlW7/NM4YGgMD9XFg
 83i5OIjdOBa1HYvetfEl3oKYsu+2zGsSqz4AH3CDIWJ8aoWJ9RNId3JJWFf+jyFR
 S+l7wMyFYdzDL7VqUmIy8xrVgc0IQPYT0udcjdOciEej873roEVencQ07VnK2zN0
 aiAmAN/BQFO0HmmH4rBvTcLxF06+HnW0CwKii0mlAeisUFTQJEDmyg823Uc+MAGl
 4pGFqDUbnzsy8xK3HCCP
 =MhfL
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-19' into staging

QAPI patches for 2016-07-19

# gpg: Signature made Tue 19 Jul 2016 19:35:27 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2016-07-19:
  net: Use correct type for bool flag
  qapi: Change Netdev into a flat union
  block: Simplify drive-mirror
  block: Simplify block_set_io_throttle
  qapi: Implement boxed types for commands/events
  qapi: Plumb in 'boxed' to qapi generator lower levels
  qapi-event: Simplify visit of non-implicit data
  qapi: Drop useless gen_err_check()
  qapi: Add type.is_empty() helper
  qapi: Hide tag_name data member of variants
  qapi: Special case c_name() for empty type
  qapi: Require all branches of flat union enum to be covered
  net: use Netdev instead of NetClientOptions in client init
  qapi: change QmpInputVisitor to QSLIST
  qapi: change QmpOutputVisitor to QSLIST

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-20 14:34:08 +01:00
Eric Blake
0e55c381f6 net: Use correct type for bool flag
is_netdev is only used as a bool, so make it one.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-14-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19 20:18:27 +02:00
Eric Blake
f394b2e20d qapi: Change Netdev into a flat union
This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union.  The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.

While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place.  Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two.  Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.

Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19 20:18:02 +02:00
Kővágó, Zoltán
cebea51057 net: use Netdev instead of NetClientOptions in client init
This way we no longer need NetClientOptions and can convert Netdev
into a flat union.

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com>

[rework net_client_init1() to pass Netdev by copying from NetdevLegacy,
rather than merging the two types - which means that we still need
NetClientOptions after all.  Rebase to qapi changes. The bulk of the
patch is mechanical, replacing 'opts' by 'netdev->opts', while
net_client_init1() takes care of converting between legacy and modern
types.]

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19 13:21:08 +02:00
Paolo Bonzini
091a6b2acf tap: fix memory leak on failure to create a multiqueue tap device
Reported by Coverity.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-18 16:16:56 +08:00
Paolo Bonzini
4555ca6816 net: fix incorrect argument to iov_to_buf
Coverity reports a "suspicious sizeof" which is indeed wrong.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-18 16:16:52 +08:00
Paolo Bonzini
2c5e564f4d net: fix incorrect access to pointer
This is not dereferencing the pointer, and instead checking only
the value of the pointer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-18 16:16:49 +08:00
Peter Maydell
190c93c982 * SCSI scanner support
* fixes to qemu-char and net exit
 * FreeBSD fixes
 * Other small bugfixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXhiZDAAoJEL/70l94x66DrGAH/10ZlIYugx6Ijn12qy3irmIC
 hbMY6HWjvPlk8ZpAcPa3UXNQvqhTwqhSMXRiwp9aNPlRUqrXnDXZapQunJveKSAn
 luLE8ISRKODz0W39qg6znyb4R1ipCGJWwjBCQmLWZuD7883JJ2DsykTATRx7yKQF
 qsq9r/DPBTfD3vnOCTbqp0GeB80UFleTNm+K7cct8M1+WzfiwKeVHk9CAKy0fkTH
 hS+YnV9UWYL6PR/w+uZ+2MfgH5er4X794+HaNbio0QJJbEZ2bsL4A3Prh7pUonN7
 qJoCbT4W79scrnWQ40RbWRXOMfUk4J7gIMEZYar8z6NmqnamNZgxbWj3dv6pO+k=
 =sz/L
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes

# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  hostmem: detect host backend memory is being used properly
  hostmem: fix QEMU crash by 'info memdev'
  char: do not use atexit cleanup handler
  net: do not use atexit for cleanup
  slirp: use exit notifier for slirp_smb_cleanup
  tap: use an exit notifier to call down_script
  util: Fix MIN_NON_ZERO
  qemu-sockets: use qapi_free_SocketAddress in cleanup
  disas: avoid including everything in headers compiled from C++
  json-streamer: fix double-free on exiting during a parse
  main-loop: check return value before using pointer
  Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
  scsi-bus: Use longer sense buffer with scanners
  scsi-bus: Add SCSI scanner support

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14 13:44:06 +01:00
Paolo Bonzini
f6c2e66ae8 slirp: use exit notifier for slirp_smb_cleanup
We would like to move back net_cleanup() at the end of main function,
like it used to be until f30dbae63a, but minimum
cleanup is needed regardless at exit() time for slirp's SMB
functionality.  Use an exit notifier to call slirp_smb_cleanup.
If net_cleanup() is called first, then remove the exit notifier as it
will become a dangling pointer otherwise.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13 13:30:00 +02:00
Marc-André Lureau
9e32ff3299 tap: use an exit notifier to call down_script
We would like to move back net_cleanup() at the end of main function,
like it used to be until f30dbae63a, but minimum
tap cleanup is necessary regarless at exit() time. Use an exit notifier
to call TAP down_script. If net_cleanup() is called first, then remove
the exit notifier as it will become a dangling pointer otherwise.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20160711144847.16651-1-marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-13 13:29:56 +02:00
Markus Armbruster
175de52487 Clean up decorations and whitespace around header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Markus Armbruster
121d07125b Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.  Offenders found with
scripts/clean-header-guards.pl -vn.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Jason Wang
69e87b3268 tap: vhost busy polling support
This patch add the capability of basic vhost net busy polling which is
supported by recent kernel. User could configure the maximum number of
us that could be spent on busy polling through a new property of tap
"poll-us".

Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-07 14:29:04 +08:00
Eric Blake
3b098d5697 qapi: Add new visit_complete() function
Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base.  Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors.  For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.

This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).

Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.

The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.

Generated code is simplified as follows for events:

|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
|     QDict *qmp;
|     Error *err = NULL;
|     QMPEventFuncEmit emit;
|-    QmpOutputVisitor *qov;
|+    QObject *obj;
|     Visitor *v;
|     q_obj_ACPI_DEVICE_OST_arg param = {
|         info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
|     qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|-    qov = qmp_output_visitor_new();
|-    v = qmp_output_get_visitor(qov);
|+    v = qmp_output_visitor_new(&obj);
|
|     visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
|     if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
|         goto out;
|     }
|
|-    qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+    visit_complete(v, &obj);
|+    qdict_put_obj(qmp, "data", obj);
|     emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);

and for commands:

| {
|     Error *err = NULL;
|-    QmpOutputVisitor *qov = qmp_output_visitor_new();
|     Visitor *v;
|
|-    v = qmp_output_get_visitor(qov);
|+    v = qmp_output_visitor_new(ret_out);
|     visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|-    if (err) {
|-        goto out;
|+    if (!err) {
|+        visit_complete(v, ret_out);
|     }
|-    *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
|     error_propagate(errp, err);

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00
Eric Blake
e7ca565629 string-output-visitor: Favor new visit_free() function
Now that we have a polymorphic visit_free(), we no longer need
string_output_visitor_cleanup(); however, we still need to
expose the subtype for string_output_get_string().

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00