Now that we are fully switched over to the new QMP library, move it back
over the old namespace. This is being done primarily so that we may
upload this package simply as "qemu.qmp" without introducing confusion
over whether or not "aqmp" is a new protocol or not.
The trade-off is increased confusion inside the QEMU developer
tree. Sorry!
Note: the 'private' member "_aqmp" in legacy.py also changes to "_qmp";
not out of necessity, but just to remove any traces of the "aqmp"
name.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
qmp-shell has a new home, add a redirect for a little while as the dust
settles.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-43-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The script will be unavailable for a commit or two, which will help
preserve development history attached to the new file. A forwarder will
be added shortly afterwards.
With qmp_shell in the python qemu.qmp package, now it is fully type
checked, linted, etc. via the Python CI. It will be quite a bit harder
to accidentally break it again in the future.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-41-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In preparation for moving qmp-shell into the qemu.qmp package, make
QMPShellError inherit from QMPError so that all custom errors in this
package all derive from QMPError.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-39-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
They're not needed; single underscore is enough to express intent that
these methods are "internal". double underscore is used as a weak name
mangling, but that isn't beneficial for us here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-38-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The nice usage comment should be a docstring instead of a comment, so
that it's visible from other python tooling.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-37-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We are only anticipating QMPShellErrors here, for syntax we weren't able
to understand. Other errors, if any, should be allowed to percolate
upwards.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-36-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
calling "transaction( )" is pointless, but valid. Rework the parser to
allow this kind of invocation. This helps clean up exception handling
later by removing accidental breakages of the parser that aren't
explicitly forbidden.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-35-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We still want to revamp qmp-shell again, but there's much more to the
idea than the comment now intuits. Remove it.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-34-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A perfect candidate is non-fatal shell history messages.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-33-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We can invoke the shell history writing when we leave the QMPShell scope
instead of relying on atexit. Doing so may be preferable to avoid global
state being registered from within a class instead of from the
application logic directly.
Use QMP's context manager to hook this history saving at close time,
which gets invoked when we leave the context block.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-32-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Similar to verbose, there's no reason this needs to be hidden.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-30-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Don't "extend" QEMUMonitorProtocol by changing the argument types. Move
the string parsing just outside of the class instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-29-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As per my usual, this patch is annotations only. Any changes with side
effects are done elsewhere.
Note: pylint does not understand the subscripts for Collection in Python 3.6,
so use the stronger Sequence type as a workaround.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-28-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add an empty completer as a more type-safe placeholder instead of
'None'.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-26-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
list is a generic type, but we expect to use strings directly. We could
subclass list[str], but pylint does not presently understand that
invocation.
Change this class to envelop a list instead of *being* a list, for
simpler mypy typing.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-25-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I'm not sure when this regressed (Or maybe if it was ever working right
to begin with?), but the Python AST requires you to change "Names" to
"Constants" in order to truly convert `false` to `False`.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-24-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of doing this in main, move it into the class itself. (This
makes it easier to put into the qemu.qmp package later by removing as
much as we can from the main() function.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-23-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's only ever used by one caller, we can just absorb that logic.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-22-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Small tidying; treat "prompt" like an immutable property instead of
function/method/routine.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-21-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
No real reason to hide this behind an underscore; make it part of the
initializer and make it a regular RW attribute.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's less useful, but it makes the initialization methods LSP
consistent, which quiets a mypy complaint.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Use argparse instead of an open-coded CLI parser, for consistency with
everything else.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A bit more idiomatic, and quiets some linter warnings.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Shushes pylint. I don't always mind these patterns personally, but I'm
not as sure that I want to remove the warning from pylint's repertoire
entirely. Oh well.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We want to remove exceptions that are too broad here; we only want to
catch IOErrors that get raised as a direct result of the open call.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A bit of churn and housekeeping for pylint, flake8 et al.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This function returns None when it doesn't find a match; do that
explicitly.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Not something I control, sorry, pylint.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
(2014 me had never written python before.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Linters get angry when we don't define state at init time.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Methods with no self-use should belong to the class.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Don't use 'qmp' here, which shadows the qmp module.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It needs to match the parent's signature -- the negotiate parameter must
be optional.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The signatures need to match.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A lot of fiddling around to get us below 80 columns.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This takes the place of qmp-shell's __get_address function. It also
allows other utilities to share the same parser and syntax for
specifying QMP locations.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If the user selects pretty-printing (-p) the contents of any
dictionaries in the output are sorted by key.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20201013141414.18398-1-david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We guarantee 3.5+ everywhere; remove more dead checks. In general, try
to avoid using version checks and instead prefer to attempt behavior
when possible.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200514035230.25756-1-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is only needed for Python 2, which we do not support anymore.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200204160604.19883-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use the program search path to find the Python 3 interpreter.
Patch created mechanically by running:
$ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \
$(git grep -l 'if __name__.*__main__')
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200130163232.10446-6-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
python3 doesn't have raw_input(), so qmp-shell breaks.
Use input() instead and override it with raw_input()
if running on python2.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190620154035.30989-1-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Use shlex to split the CLI command, respecting quoted arguments, and
also comments. This allows to call for ex:
(QEMU) human-monitor-command command-line="screendump /dev/null"
{"execute": "human-monitor-command", "arguments": {"command-line": "screendump /dev/null"}}
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180326150916.9602-3-marcandre.lureau@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
John Snow
David Edmondson
Paolo Bonzini
Philippe Mathieu-Daudé
Igor Mammedov
Marc-André Lureau
Cleber Rosa