Commit Graph

85 Commits

Author SHA1 Message Date
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
David Gibson d5aea6f367 mmu-hash*: Add header file for definitions
Currently cpu.h contains a number of definitions relating to the 64-bit
hash MMU.  Some are used in the MMU emulation code, but some are only used
in the spapr MMU management hcall implementations.

This patch moves these definitions (except for a few that are needed
more widely) into mmu-hash64.h header, shared between the MMU emulation
code and the spapr hcall code.  The MMU emulation code is also updated to
actually use a number of those definitions in place of hard coded
constants.

Similarly, we add new analogous definitions to mmu-hash32.h and use those
in place of many hard-coded constants in mmu-hash32.c

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix 32-bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22 15:28:48 +01:00
David Gibson c6304a4a68 target-ppc: Remove CONFIG_PSERIES dependency in kvm.c
target-ppc/kvm.c has an #ifdef on CONFIG_PSERIES, for the handling of
KVM exits due to a PAPR hypercall from the guest.  However, since commit
e4c8b28cde "ppc: express FDT dependency of
pSeries and e500 boards via default-configs/", this hasn't worked properly.
That patch altered the configuration setup so that although CONFIG_PSERIES
is visible from the Makefiles, it is not visible from C files.  This broke
the pseries machine when KVM is in use.

This patch makes a quick and dirty fix, by removing the CONFIG_PSERIES
dependency, replacing it with TARGET_PPC64 (since removing it entirely
leads to type mismatch errors).  Technically this breaks the build when
configured with --disable-fdt, since that disables CONFIG_PSERIES on
TARGET_PPC64.  However, it turns out the build was already broken in that
case, so this fixes pseries kvm without breaking anything extra.  I'm
looking into how to fix that build breakage, but I don't think that need
delay applying this patch.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22 15:28:45 +01:00
Andreas Färber 259186a7d2 cpu: Move halted and interrupt_request fields to CPUState
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.

Pass PowerPCCPU to kvmppc_handle_halt().

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12 10:35:55 +01:00
Andreas Färber 5ba4576b85 target-ppc: Make host CPU a subclass of the host's CPU model
This avoids assigning individual class fields and contributors
forgetting to add field assignments in KVM-only code.

ppc_cpu_class_find_by_pvr() requires the CPU model classes to be
registered, so defer host CPU type registration to kvm_arch_init().

Only register the host CPU type if there is a class with matching PVR.
This lets us drop error handling from instance_init.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-08 21:04:53 +01:00
David Gibson 70b79849b8 target-ppc: Synchronize FPU state with KVM
Currently qemu does not get and put the state of the floating point and
vector registers to KVM.  This is obviously a problem for savevm, as well
as possibly being problematic for debugging of FP-using guests.

This patch fixes this by using new extensions to the ONE_REG interface to
synchronize the qemu floating point state with KVM.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-08 21:04:52 +01:00
David Gibson d67d40ea07 target-ppc: Add mechanism for synchronizing SPRs with KVM
Currently when runing under KVM on ppc, we synchronize a certain number of
vital SPRs to KVM through the SET_SREGS call.  This leaves out quite a lot
of important SPRs which are maintained in KVM.  It would be helpful to
have their contents in qemu for debugging purposes, and when we implement
migration it will be vital, since they include important guest state that
will need to be restored on the target.

This patch sets up for synchronization of any registers supported by the
KVM ONE_REG calls.  A new variant on spr_register() allows a ONE_REG id to
be stored with the SPR information.  When we set/get information to KVM
we also synchronize any SPRs so registered.

For now we set this mechanism up to synchronize a handful of important
registers that already have ONE_REG IDs, notably the DAR and DSISR.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-08 21:04:52 +01:00
Andreas Färber cfe34f44b3 target-ppc: Convert CPU definitions
Turn the array of model definitions into a set of self-registering QOM
types with their own class_init. Unique identifiers are obtained from
the combination of PVR, SVR and family identifiers; this requires all
alias #defines to be removed from the list. Possibly there are some more
left after this commit that are not currently being compiled.

Prepares for introducing abstract intermediate CPU types for families.

Keep the right-aligned macro line breaks within 78 chars to aid
three-way merges.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-08 21:04:51 +01:00
Richard Henderson da91a00f19 target-ppc: Split out SO, OV, CA fields from XER
In preparation for more efficient setting of these fields.

Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23 17:25:30 +00:00
Eduardo Habkost b164e48ed1 kvm: Create kvm_arch_vcpu_id() function
This will allow each architecture to define how the VCPU ID is set on
the KVM_CREATE_VCPU ioctl call.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-27 14:34:26 +01:00
Alexander Graf 5b95b8b9c1 PPC: KVM: Add support for EPR with KVM
This patch links KVM EPR support to the existing TCG support we have now.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-18 19:06:57 +01:00
Andreas Färber 55e5c28502 cpu: Move cpu_index field to CPUState
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.

Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.

Move common parts of mips cpu_state_reset() to mips_cpu_reset().

Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-15 04:09:13 +01:00
Andreas Färber 1b7ce68fb4 target-ppc: Error out for -cpu host on unknown PVR
Previously we silently exited, with subclasses we got an opcode warning.
Instead, explicitly tell the user what's wrong.

An indication for this is -cpu ? showing "host" with an all-zero PVR.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-07 17:37:11 +01:00
Andreas Färber 2985b86b5c target-ppc: Slim conversion of model definitions to QOM subclasses
Since the model list is highly macrofied, keep ppc_def_t for now and
save a pointer to it in PowerPCCPUClass. This results in a flat list of
subclasses including aliases, to be refined later.

Move cpu_ppc_init() to translate_init.c and drop helper.c.
Long-term the idea is to turn translate_init.c into a standalone cpu.c.

Inline cpu_ppc_usable() into type registration.

Split cpu_ppc_register() in two by code movement into the initfn and
by turning the remaining part into a realizefn.
Move qemu_init_vcpu() call into the new realizefn and adapt
create_ppc_opcodes() to return an Error.

Change ppc_find_by_pvr() -> ppc_cpu_class_by_pvr().
Change ppc_find_by_name() -> ppc_cpu_class_by_name().

Turn -cpu host into its own subclass. This requires to move the
kvm_enabled() check in ppc_cpu_class_by_name() to avoid the class being
found via the normal name lookup in the !kvm_enabled() case.
Turn kvmppc_host_cpu_def() into the class_init and add an initfn that
asserts KVM is in fact enabled.

Implement -cpu ? and the QMP equivalent in terms of subclasses.
This newly exposes -cpu host to the user, ordered last for -cpu ?.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-07 17:37:11 +01:00
Stuart Yoder 1a61a9ae61 PPC: KVM: set has-idle in guest device tree
On e500mc, the platform doesn't provide a way for the CPU to go idle.

To still not uselessly burn CPU time, expose an idle hypercall to the guest
if kvm supports it.

Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
[agraf: adjust for current code base, add patch description, fix non-kvm case]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-07 17:37:11 +01:00
Andreas Färber 501a7ce727 Merge branch 'master' of git://git.qemu.org/qemu into qom-cpu
Adapt header include paths.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-23 00:40:49 +01:00
Andreas Färber a60f24b56b cpu: Move kvm_state field into CPUState
Adapt some functions to take CPUState / {PowerPC,S390}CPU argument.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19 14:09:32 +01:00
Andreas Färber 1bc22652d6 kvm: Pass CPUState to kvm_vcpu_ioctl()
Adapt helper functions to pass X86CPU / PowerPCCPU / S390CPU.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19 14:09:31 +01:00
Andreas Färber 20d695a925 kvm: Pass CPUState to kvm_arch_*
Move kvm_vcpu_dirty field into CPUState to simplify things and change
its type to bool while at it.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19 14:09:31 +01:00
Paolo Bonzini 9c17d615a6 softmmu: move include files to include/sysemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:45 +01:00
Paolo Bonzini 1de7afc984 misc: move include files to include/qemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:39 +01:00
Andreas Färber aa100fa4c9 spapr: Pass PowerPCCPU to spapr_hypercall()
Needed for changing the hypercall handlers' argument type to PowerPCCPU.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-31 01:02:45 +01:00
Andreas Färber c08d7424d6 cpus: Pass CPUState to qemu_cpu_kick()
CPUArchState is no longer needed there.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-31 01:02:45 +01:00
Andreas Färber d5a6814697 target-ppc: Rename kvm_kick_{env => cpu} and pass PowerPCCPU
Needed for changing qemu_cpu_kick() argument type to CPUState.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-31 01:02:45 +01:00
Aurelien Jarno 6b2f90fbbd Merge branch 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (35 commits)
  PPC: KVM: Fix BAT put
  PPC: e500: Only expose even TLB sizes in initial TLB
  ppc/pseries: Reset VPA registration on CPU reset
  pseries: Don't test for MSR_PR for hypercalls under KVM
  PPC: e500: calculate initrd_base like dt_base
  PPC: e500: increase DTC_LOAD_PAD
  device tree: simplify dumpdtb code
  fdt: move dumpdtb interpretation code to device_tree.c
  target-ppc: Remove unused power_mode field from cpu state
  pseries: Set hash table size based on RAM size
  pseries: Remove unnecessary locking from PAPR hash table hcalls
  ppc405_uc: Fix buffer overflow
  target-ppc: KVM: Fix some kernel version edge cases for kvmppc_reset_htab()
  pseries: Fix semantics of RTAS int-on, int-off and set-xive functions
  pseries: Rework implementation of TCE bypass
  pseries: Remove never used flags field from spapr vio devices
  pseries: Remove XICS irq type enum type
  pseries: Remove C bitfields from xics code
  pseries: Small cleanup to H_CEDE implementation
  pseries: Fix XICS reset
  ...
2012-10-06 18:51:36 +02:00
Jim Meyering ae21506801 ppc: avoid buffer overrun: use pstrcpy, not strncpy
A terminal NUL is required by caller's use of strchr.
It's better not to use strncpy at all, since there is no need
to zero out hundreds of trailing bytes for each iteration.

Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05 07:58:37 -05:00
Alexander Graf ef8beb0e94 PPC: KVM: Fix BAT put
In the sregs API, upper and lower 32bit segments of the BAT registers
are swapped when doing a set. Since we need to support old kernels out
there, don't bother to fix it in the kernel, but instead work around
the problem in QEMU by swapping on put.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05 04:38:46 +02:00
David Gibson ace9a2cbac target-ppc: KVM: Fix some kernel version edge cases for kvmppc_reset_htab()
The kvmppc_reset_htab() function invokes the KVM_PPC_ALLOCATE_HTAB vm ioctl
to request KVM to allocate and reset a hash page table for the guest - it
returns the size of hash table allocated, or 0 to indicate that qemu needs
to allocate the hash table itself.  In practice qemu needs to allocate the
htab for full emulation and with Book3sPR KVM, but the kernel has to
allocate it for Book3sHV KVM (the hash table needs to be physically
contiguous in that case).

Unfortunately, the logic in this function is incorrect for some existing
kernels.  Specifically:
  * at least some PR KVM versions advertise the relevant capability but
don't actually implement the ioctl(), returning ENOTTY.
  * For old kernels which don't have the capability, we currently return 0.
This is correct for PV KVM, where we need to allocate the htab, but not for
HV KVM - kernels of this era always allocate a 16MB hash table per guest.

This patch corrects both of these edge cases.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-04 15:54:18 +02:00
David Gibson 7f763a5d99 pseries: Add support for new KVM hash table control call
This adds support for then new "reset htab" ioctl which allows qemu
to properly cleanup the MMU hash table when the guest is reset. With
the corresponding kernel support, reset of a guest now works properly.

This also paves the way for indicating a different size hash table
to the kernel and for the kernel to be able to impose limits on
the requested size.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-04 15:54:17 +02:00
David Gibson f1af19d767 ppc: Make kvm_arch_put_registers() put *all* the registers
At least when invoked with high enough 'level' arguments,
kvm_arch_put_registers() is supposed to copy essentially all the cpu state
as encoded in qemu's internal structures into the kvm state.  Currently
the ppc version does not do this - it never calls KVM_SET_SREGS, for
example, and therefore never sets the SDR1 and various other important
though rarely changed registers.

Instead, the code paths which need to set these registers need to
explicitly make (conditional) kvm calls which transfer the changes to kvm.
This breaks the usual model of handling state updates in qemu, where code
just changes the internal model and has it flushed out to kvm automatically
at some later point.

This patch fixes this for Book S ppc CPUs by adding a suitable call to
KVM_SET_SREGS and als to KVM_SET_ONE_REG to set the HIOR (the only register
that is set with that call so far).  This lets us remove the hacks to
explicitly set these registers from the kvmppc_set_papr() function.

The problem still exists for Book E CPUs (which use a different version of
the kvm_sregs structure).  But fixing that has some complications of its
own so can be left to another day.

Lkewise, there is still some ugly code for setting the PVR through special
calls to SET_SREGS which is left in for now.  The PVR needs to be set
especially early because it can affect what other features are available
on the CPU, so I need to do more thinking to see if it can be integrated
into the normal paths or not.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-04 15:54:17 +02:00
David Gibson 78e8fde26c ppc: Fix bug in handling of PAPR hypercall exits
Currently for powerpc, kvm_arch_handle_exit() always returns 1, meaning
that its caller - kvm_cpu_exec() - will always exit immediately afterwards
to the loop in qemu_kvm_cpu_thread_fn().

There's no need to do this.  Once we've handled the hypercall there's no
reason we can't go straight around and KVM_RUN again, which is what ret = 0
will signal.  The only exception might be for hypercalls which affect the
state of cpu_can_run(), however the only one that might do this is H_CEDE
and for kvm that is always handled in the kernel, not qemu.

Furtherm setting ret = 0 means that when exit_requested is set from a
hypercall, we will enter KVM_RUN once more with a signal which lets the
the kernel do its internal logic to complete the hypercall with out
actually executing any more guest code.  This is important if our hypercall
also triggered a reset, which previously would re-initialize everything
without completing the hypercall.  This caused the kernel to get confused
because it thought the guest was still in the middle of a hypercall when
it has actually been reset.

This patch therefore changes to ret = 0, which is both a bugfix and a small
optimization.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15 19:43:14 +02:00
David Gibson ad0ebb91cd pseries: Convert sPAPR TCEs to use generic IOMMU infrastructure
The pseries platform already contains an IOMMU implementation, since it is
essential for the platform's paravirtualized VIO devices.  This IOMMU
support is currently built into the implementation of the VIO "bus" and
the various VIO devices.

This patch converts this code to make use of the new common IOMMU
infrastructure.

We don't yet handle synchronization of map/unmap callbacks vs. invalidations,
this will require some complex interaction with the kernel and is not a
major concern at this stage.

Cc: Alex Graf <agraf@suse.de>

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 16:33:25 -05:00
Benjamin Herrenschmidt 4656e1f012 ppc64: Rudimentary Support for extra page sizes on server CPUs
More recent Power server chips (i.e. based on the 64 bit hash MMU)
support more than just the traditional 4k and 16M page sizes.  This
can get quite complicated, because which page sizes are supported,
which combinations are supported within an MMU segment and how these
page sizes are encoded both in the SLB entry and the hash PTE can vary
depending on the CPU model (they are not specified by the
architecture).  In addition the firmware or hypervisor may not permit
use of certain page sizes, for various reasons.  Whether various page
sizes are supported on KVM, for example, depends on whether the PR or
HV variant of KVM is in use, and on the page size of the memory
backing the guest's RAM.

This patch adds information to the CPUState and cpu defs to describe
the supported page sizes and encodings.  Since TCG does not yet
support any extended page sizes, we just set this to NULL in the
static CPU definitions, expanding this to the default 4k and 16M page
sizes when we initialize the cpu state.  When using KVM, however, we
instead determine available page sizes using the new
KVM_PPC_GET_SMMU_INFO call.  For old kernels without that call, we use
some defaults, with some guesswork which should do the right thing for
existing HV and PR implementations.  The fallback might not be correct
for future versions, but that's ok, because they'll have
KVM_PPC_GET_SMMU_INFO.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24 01:04:44 +02:00
David Gibson 12b1143b28 target-ppc: Add hooks for handling tcg and kvm limitations
On target-ppc, our table of CPU types and features encodes the features as
found on the hardware, regardless of whether these features are actually
usable under TCG or KVM.  We already have cases where the information from
the cpu table must be fixed up to account for limitations in the emulation
method we're using.  e.g. TCG does not support the DFP and VSX instructions
and KVM needs different numbering of the CPUs in order to tell it the
correct thread to core mappings.

This patch cleans up these hacks to handle emulation limitations by
consolidating them into a pair of functions specifically for the purpose.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[AF: Style and typo fixes, rename new functions and drop ppc_def_t arg]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-15 17:09:54 +02:00
Stefan Weil 5cbdb3a34b Replace Qemu by QEMU in comments
The official spelling is QEMU.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[blauwirbel@gmail.com: fixed comment style in hw/sun4m.c]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-07 14:00:45 +00:00
David Gibson b5aec39672 pseries: Don't try to munmap() a malloc()ed TCE table
For the pseries machine, TCE (IOMMU) tables can either be directly
malloc()ed in qemu or, when running on a KVM which supports it, mmap()ed
from a KVM ioctl.  The latter option is used when available, because it
allows the (frequent bottlenext) H_PUT_TCE hypercall to be KVM accelerated.
However, even when KVM is persent, TCE acceleration is not always possible.
Only KVM HV supports this ioctl(), not KVM PR, or the kernel could run out
of contiguous memory to allocate the new table.  In this case we need to
fall back on the malloc()ed table.

When a device is removed, and we need to remove the TCE table, we need to
either munmap() or free() the table as appropriate for how it was
allocated.  The code is supposed to do that, but we buggily fail to
initialize the tcet->fd variable in the malloc() case, which is used as a
flag to determine which is the right choice.

This patch fixes the bug, and cleans up error messages relating to this
path while we're at it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-15 13:12:11 +01:00
Andreas Färber 1328c2bf21 target-ppc: Don't overuse CPUState
Scripted conversion:
  sed -i "s/CPUState/CPUPPCState/g" target-ppc/*.[hc]
  sed -i "s/#define CPUPPCState/#define CPUState/" target-ppc/cpu.h

Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14 22:20:25 +01:00
Alexander Graf a31be480a0 PPC: KVM: Update HIOR code to new interface
Unfortunately the HIOR setting code slipped into upstream QEMU
before it was pulled into upstream KVM. And since Murphy is always
right, comments on the patches only emerged on the pull request
leading to changes in the interface.

So here's an update to the HIOR setting. While at it, I also relaxed
it a bit since for HV KVM we can already run fine without and 3.2
works just fine with HV KVM but when not setting HIOR. We will only
need this when running PAPR in PR KVM.

Since we accidently changed the ABI and API along the way, we have
to update the underlying kernel headers together with the code that
uses it to not break bisectability.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-02 02:47:45 +01:00
Avi Kivity 6148b23d69 kvm: fix build error in ppc kvm due to memory_region_init_ram_ptr() change
Commit c5705a772 ("vmstate, memory: decouple vmstate from memory API") changed
the signature of memory_region_init_ram_ptr() but did not update a caller in
the ppc kvm module.  Fix.

Signed-off-by: Avi Kivity <avi@redhat.com>
2012-01-08 12:59:16 +02:00
Liu Yu-B13201 157feeadba kvm-ppc: halt secondary cpus when guest reset
When guest reset, we need to halt secondary cpus until guest kick them.
This already works for tcg. The patch add the support for kvm.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf: remove in-kernel irqchip code]
2012-01-03 15:48:20 +01:00
David Gibson 74b41e5676 pseries: Allow writes to KVM accelerated TCE table
Sufficiently recent kernels include a KVM call to accelerate use of
PAPR TCE tables (IOMMU), which are used by PAPR virtual IO devices.
This involves qemu mapping the TCE table in from a kernel obtained fd,
which currently we do with PROT_READ only.  This is a hangover from
early (never released) versions of this kernel interface which only
permitted read-only mappings and required us to destroy and recreate
the table when we needed to clear it from qemu.

Now, the kernel permits read-write mappings, and we rely on this to
clear the table in spapr_vio_quiesce_one().  However, due to
insufficient testing, I forgot to update the actual mapping of the
table in kvmppc_create_spapr_tce() to add PROT_WRITE to the mmap().

This patch corrects the oversight.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30 20:03:27 +01:00
Alexander Graf 70bca53ffb KVM: PPC: Override host vmx/vsx/dfp only when information known
The -cpu host feature tries to find out the host capabilities based
on device tree information. However, we don't always have that available
because it's an optional property in dt.

So instead of force unsetting values depending on an unreliable source
of information, let's just try to be clever about it and not override
capabilities when we don't know the device tree pieces.

This fixes altivec with -cpu host on YDL PowerStations.

Reported-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30 20:03:27 +01:00
David Gibson a7342588c0 pseries: Correct vmx/dfp handling in both KVM and TCG cases
Currently, when KVM is enabled, the pseries machine checks if the host
CPU supports VMX, VSX and/or DFP instructions and advertises
accordingly in the guest device tree.  It does this regardless of what
CPU is selected on the command line.  On the other hand, when in TCG
mode, it never advertises any of these facilities, even basic VMX
(Altivec) which is supported in TCG.

Now that we have a -cpu host option for ppc, it is fairly
straightforward to fix both problems.  This patch changes the -cpu
host code to override the basic cpu spec derived from the PVR with
information queried from the host avout VMX, VSX and DFP capability.
The pseries code then uses the instruction availability advertised in
the cpu state to set the guest device tree correctly for both the KVM
and TCG cases.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30 20:03:26 +01:00
David Gibson a1e985833c ppc: First cut implementation of -cpu host
For convenience with kvm, x86 allows the user to specify -cpu host on the
qemu command line, which means make the guest cpu the same as the host
cpu.  This patch implements the same option for ppc targets.

For now, this just read the host PVR (Processor Version Register) and
selects one of our existing CPU specs based on it.  This means that the
option will not work if the host cpu is not supported by TCG, even if that
wouldn't matter for use under kvm.

In future, we can extend this in future to override parts of the cpu spec
based on information obtained from the host (via /proc/cpuinfo, the host
device tree, or explicit KVM calls).  That will let us handle cases where
the real kvm-virtualized CPU doesn't behave exactly like the TCG-emulated
CPU.  With appropriate annotation of the CPU specs we'll also then be able
to use host cpus under kvm even when there isn't a matching full TCG model.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30 17:11:54 +01:00
David Gibson 6659394fa1 pseries: Add device tree properties for VMX/VSX and DFP under kvm
Sufficiently recent PAPR specifications define properties "ibm,vmx"
and "ibm,dfp" on the CPU node which advertise whether the VMX vector
extensions (or the later VSX version) and/or the Decimal Floating
Point operations from IBM's recent POWER CPUs are available.

Currently we do not put these in the guest device tree and the guest
kernel will consequently assume they are not available.  This is good,
because they are not supported under TCG.  VMX is similar enough to
Altivec that it might be trivial to support, but VSX and DFP would
both require significant work to support in TCG.

However, when running under kvm on a host which supports these
instructions, there's no reason not to let the guest use them.  This
patch, therefore, checks for the relevant support on the host CPU
and, if present, advertises them to the guest as well.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30 17:11:53 +01:00
David Gibson 9bc884b741 ppc: Generalize the kvmppc_get_clockfreq() function
Currently the kvmppc_get_clockfreq() function reads the host's clock
frequency from /proc/device-tree, which is useful to past to the guest
in KVM setups.  However, there are some other host properties
advertised in the device tree which can also be relevant to the
guests.

This patch, therefore, replaces kvmppc_get_clockfreq() which can
retrieve any named, single integer property from the host device
tree's CPU node.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30 17:11:53 +01:00
David Gibson 0f5cb2989f pseries: Use Book3S-HV TCE acceleration capabilities
The pseries machine of qemu implements the TCE mechanism used as a
virtual IOMMU for the PAPR defined virtual IO devices.  Because the
PAPR spec only defines a small DMA address space, the guest VIO
drivers need to update TCE mappings very frequently - the virtual
network device is particularly bad.  This means many slow exits to
qemu to emulate the H_PUT_TCE hypercall.

Sufficiently recent kernels allow this to be mitigated by implementing
H_PUT_TCE in the host kernel.  To make use of this, however, qemu
needs to initialize the necessary TCE tables, and map them into itself
so that the VIO device implementations can retrieve the mappings when
they access guest memory (which is treated as a virtual DMA
operation).

This patch adds the necessary calls to use the KVM TCE acceleration.
If the kernel does not support acceleration, or there is some other
error creating the accelerated TCE table, then it will still fall back
to full userspace TCE implementation.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30 17:11:53 +01:00
David Gibson 354ac20a36 pseries: Allow KVM Book3S-HV on PPC970 CPUS
At present, using the hypervisor aware Book3S-HV KVM will only work
with qemu on POWER7 CPUs.  PPC970 CPUs also have hypervisor
capability, but they lack the VRMA feature which makes assigning guest
memory easier.

In order to allow KVM Book3S-HV on PPC970, we need to specially
allocate the first chunk of guest memory (the "Real Mode Area" or
RMA), so that it is physically contiguous.

Sufficiently recent host kernels allow such contiguous RMAs to be
allocated, with a kvm capability advertising whether the feature is
available and/or necessary on this hardware.  This patch enables qemu
to use this support, thus allowing kvm acceleration of pseries qemu
machines on PPC970 hardware.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>

---

agraf: fix to use memory api
2011-10-30 17:11:53 +01:00
David Gibson e97c363638 pseries: Support SMT systems for KVM Book3S-HV
Alex Graf has already made qemu support KVM for the pseries machine
when using the Book3S-PR KVM variant (which runs the guest in
usermode, emulating supervisor operations).  This code allows gets us
very close to also working with KVM Book3S-HV (using the hypervisor
capabilities of recent POWER CPUs).

This patch moves us another step towards Book3S-HV support by
correctly handling SMT (multithreaded) POWER CPUs.  There are two
parts to this:

 * Querying KVM to check SMT capability, and if present, adjusting the
   cpu numbers that qemu assigns to cause KVM to assign guest threads
   to cores in the right way (this isn't automatic, because the POWER
   HV support has a limitation that different threads on a single core
   cannot be in different guests at the same time).

 * Correctly informing the guest OS of the SMT thread to core mappings
   via the device tree.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-30 17:11:53 +01:00
Alexander Graf 94135e813c KVM: PPC: Use HIOR setting for -M pseries with PR KVM
When running with PR KVM, we need to set HIOR directly. Thankfully there
is now a new interface to set registers individually so we can just use that
and poke HIOR into the guest vcpu's HIOR register.

While at it, this also sets SDR1 because -M pseries requires it to run.

With this patch, -M pseries works properly with PR KVM.

Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06 09:48:08 +02:00