Commit Graph

732 Commits

Author SHA1 Message Date
Ilya Leoshkevich
372886d2ae tests/tcg/s390x: Test CLGEBR and CGEBRA
Add a small test to prevent regressions.

Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-10-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-24 18:44:47 +02:00
Ilya Leoshkevich
f6044c994a tests/tcg/s390x: Test CKSM
Add a small test to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230724082032.66864-9-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-24 18:44:47 +02:00
Richard Henderson
94d68c1136 Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
 * Factor out extension tests to cpu_cfg.h
 * disas/riscv: Add vendor extension support
 * disas/riscv: Add support for XVentanaCondOps
 * disas/riscv: Add support for XThead* instructions
 * Fix mstatus related problems
 * Fix veyron-v1 CPU properties
 * Fix the xlen for data address when MPRV=1
 * opensbi: Upgrade from v1.2 to v1.3
 * Enable 32-bit Spike OpenSBI boot testing
 * Support the watchdog timer of HiFive 1 rev b
 * Only build qemu-system-riscv$$ on rv$$ host
 * Add RVV registers to log
 * Restrict ACLINT to TCG
 * Add syscall riscv_hwprobe
 * Add support for BF16 extensions
 * KVM_RISCV_SET_TIMER macro is not configured correctly
 * Generate devicetree only after machine initialization is complete
 * virt: Convert fdt_load_addr to uint64_t
 * KVM: fixes and enhancements
 * Add support for the Zfa extension
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
 gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
 +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
 vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
 KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
 bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
 nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
 ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
 ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
 TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
 XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
 ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
 =3XFD
 -----END PGP SIGNATURE-----

Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging

Third RISC-V PR for 8.1

* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg:                using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65  9296 AF7C 9513 0C53 8013

* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
  riscv: Add support for the Zfa extension
  target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
  target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
  target/riscv: update multi-letter extension KVM properties
  target/riscv/cpu.c: create KVM mock properties
  target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
  target/riscv/cpu.c: add satp_mode properties earlier
  target/riscv/kvm.c: add multi-letter extension KVM properties
  target/riscv/kvm.c: update KVM MISA bits
  target/riscv: add KVM specific MISA properties
  target/riscv/cpu: add misa_ext_info_arr[]
  target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
  target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
  target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
  target/riscv: use KVM scratch CPUs to init KVM properties
  target/riscv/cpu.c: restrict 'marchid' value
  target/riscv/cpu.c: restrict 'mimpid' value
  target/riscv/cpu.c: restrict 'mvendorid' value
  hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
  target/riscv: skip features setup for KVM CPUs
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10 21:42:50 +01:00
Ilya Leoshkevich
cb2d7e63d1 tests/tcg/s390x: Fix test-svc with clang
clang does not support expressions involving symbols in instructions
like lghi yet, so building hello-s390x-asm.S with it fails.

Move the expression to the literal pool and load it from there.

Fixes: be4a4cb429 ("tests/tcg/s390x: Test single-stepping SVC")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230707154242.457706-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10 15:34:57 +02:00
Ilya Leoshkevich
bfde1be8b3 tests/tcg/s390x: Test MVCRL with a large value in R0
Add a small test to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-13-iii@linux.ibm.com>
[thuth: Apply fix for compiling with GCC 11]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10 15:34:24 +02:00
Ilya Leoshkevich
85411ac9b3 tests/tcg/s390x: Test MDEB and MDEBR
Add a small test to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-12-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10 15:34:24 +02:00
Ilya Leoshkevich
028dc70e18 tests/tcg/s390x: Test LRA
Add a small test to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230704081506.276055-11-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10 15:34:24 +02:00
Ilya Leoshkevich
ad85ac6a8f tests/tcg/s390x: Test LARL with a large offset
Add a small test to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-10-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10 15:34:24 +02:00
Ilya Leoshkevich
f5c2ae7134 tests/tcg/s390x: Test EPSW
Add a small test to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-9-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10 15:34:24 +02:00
Christoph Müllner
a47842d166 riscv: Add support for the Zfa extension
This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)

Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)

Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.

The Zfa specification can be found here:
  https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
  https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg

The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10 22:29:20 +10:00
Richard Henderson
ca1e9c3ba1 tests/multiarch: Add test-aes
Use a shared driver and backends for i386, aarch64, ppc64, riscv64.

Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-08 07:30:17 +01:00
Richard Henderson
1f51573f79 target/arm: Fix SME full tile indexing
For the outer product set of insns, which take an entire matrix
tile as output, the argument is not a combined tile+column.
Therefore using get_tile_rowcol was incorrect, as we extracted
the tile number from itself.

The test case relies only on assembler support for SME, since
no release of GCC recognizes -march=armv9-a+sme yet.

Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1620
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230622151201.1578522-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: dropped now-unneeded changes to sysregs CFLAGS]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06 12:56:21 +01:00
Peter Maydell
3dc2afeab2 tests/tcg/aarch64/sysregs.c: Use S syntax for id_aa64zfr0_el1 and id_aa64smfr0_el1
Some assemblers will complain about attempts to access
id_aa64zfr0_el1 and id_aa64smfr0_el1 by name if the test
binary isn't built for the right processor type:

 /tmp/ccASXpLo.s:782: Error: selected processor does not support system register name 'id_aa64zfr0_el1'
 /tmp/ccASXpLo.s:829: Error: selected processor does not support system register name 'id_aa64smfr0_el1'

However, these registers are in the ID space and are guaranteed to
read-as-zero on older CPUs, so the access is both safe and sensible.
Switch to using the S syntax, as we already do for ID_AA64ISAR2_EL1
and ID_AA64MMFR2_EL1.  This allows us to drop the HAS_ARMV9_SME check
and the makefile machinery to adjust the CFLAGS for this test, so we
don't rely on having a sufficiently new compiler to be able to check
these registers.

This means we're actually testing the SME ID register: no released
GCC yet recognizes -march=armv9-a+sme, so that was always skipped.
It also avoids a future problem if we try to switch the "do we have
SME support in the toolchain" check from "in the compiler" to "in the
assembler" (at which point we would otherwise run into the above
errors).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-07-06 12:38:19 +01:00
Ilya Leoshkevich
a634148269 tests/tcg: Add a test for info proc mappings
Add a small test to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230621203627.1808446-9-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-39-alex.bennee@linaro.org>
2023-07-03 12:52:38 +01:00
Alex Bennée
6d03226b42 plugins: force slow path when plugins instrument memory ops
The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.

We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:

 ./qemu-system-aarch64 -display none -serial mon:stdio \
   -M virt -cpu max -semihosting-config enable=on \
   -kernel ./tests/tcg/aarch64-softmmu/memory-sve \
   -plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin

gives (disas doesn't currently understand st1w):

  0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM

And for user-mode:

  ./qemu-aarch64 \
    -plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
    -d plugin \
    ./tests/tcg/aarch64-linux-user/sha512-sve

gives:

  1..10
  ok 1 - do_test(&tests[i])
  0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
  ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af

(4007c0 is the ld1b in the sha512-sve)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
2023-07-03 12:51:58 +01:00
Alex Bennée
af323aabe2 tests/tcg: add mechanism to handle plugin arguments
We recently missed a regression that should have been picked up by
check-tcg. This was because the libmem plugin is effectively a NOP if
the user doesn't specify the type to use.

Rather than changing the default behaviour add an additional expansion
so we can take this into account in future.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-6-alex.bennee@linaro.org>
2023-07-03 12:51:18 +01:00
Richard Henderson
7012b69184 tests/tcg/alpha: Add test for cvttq
Test for invalid, integer overflow, and inexact.
Test for proper result, modulo 2**64.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230527141910.1885950-3-richard.henderson@linaro.org>
2023-07-01 08:26:54 +02:00
Thomas Huth
e31f08dc74 pc-bios/s390-ccw: Move the stack array into start.S
The stack array is only referenced from the start-up code (which is
shared between the s390-ccw.img and the s390-netboot.img), but it is
currently declared twice, once in main.c and once in netmain.c.
It makes more sense to declare this in start.S instead - which will
also be helpful in the next patch, since we need to mention the .bss
section in start.S in that patch.

While we're at it, let's also drop the huge alignment of the stack,
since there is no technical requirement for aligning it to page
boundaries.

Message-Id: <20230627074703.99608-4-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-06-29 20:45:12 +02:00
Richard Henderson
ea185a557b tests/plugin: Remove duplicate insn log from libinsn.so
This is a perfectly natural occurrence for x86 "rep movb",
where the "rep" prefix forms a counted loop of the one insn.

During the tests/tcg/multiarch/memory test, this logging is
triggered over 350000 times.  Within the context of cross-i386-tci
build, which is already slow by nature, the logging is sufficient
to push the test into timeout.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-26 17:33:00 +02:00
Bastian Koppelmann
e926c94171 tests/tcg/tricore: Add recursion test for CSAs
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230526061946.54514-7-kbastian@mail.uni-paderborn.de>
2023-06-07 18:20:51 +02:00
Bastian Koppelmann
0e45f7beca tests/tcg/tricore: Add first C program
this allows us to exercise the startup code used by GCC to call main().

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230526061946.54514-4-kbastian@mail.uni-paderborn.de>
2023-06-07 18:20:42 +02:00
Bastian Koppelmann
2b8e2992c3 tests/tcg/tricore: Uses label for memory addresses
the linker might rearrange sections, so lets reference memory by label
name instead of addr + off.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230526061946.54514-3-kbastian@mail.uni-paderborn.de>
2023-06-07 18:20:40 +02:00
Bastian Koppelmann
8b50d564be tests/tcg/tricore: Move asm tests into 'asm' directory
this seperates these tests from the upcoming tests written in C.
Also rename the compiled test to 'test_<foo>.asm.tst'.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230526061946.54514-2-kbastian@mail.uni-paderborn.de>
2023-06-07 18:20:25 +02:00
Richard Henderson
f5e6786de4 target-arm queue:
* Support gdbstub (guest debug) in HVF
  * xnlx-versal: Support CANFD controller
  * bpim2u: New board model: Banana Pi BPI-M2 Ultra
  * Emulate FEAT_LSE2
  * allow DC CVA[D]P in user mode emulation
  * trap DCC access in user mode emulation
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmR/AKUZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jzIEACNepQGY44yPhrEG+wD4WAB
 fH670KI33HcsFd2rGsC369gcssQbRIW/29reOzNhRMuol+kHI6OFaONpuKSdO0Rz
 TLVIsnT2Uq8KwbYfLtDQt5knj027amPy75d4re8wIK1eZB4dOIHysqAvQrJYeync
 9obKku8xXGLwZh/mYHoVgHcZU0cPJO9nri39n1tV3JUBsgmqEURjzbZrMcF+yMX7
 bUzOYQvC1Iedmo+aWfx43u82AlNQFz1lsqmnQj7Z5rvv0HT+BRF5WzVMP0qRh5+Z
 njkqmBH9xb9kkgeHmeMvHpWox+J+obeSmVg/4gDNlJpThmpuU0Vr7EXUN3MBQlV9
 lhyy6zrTwC/BToiQqdT2dnpao9FzXy5exfnqi/py5IuqfjAzSO+p61LlPPZ4cJri
 pCK4yq2gzQXYfrlZkUJipvRMH8Xa4IdQx+w7lXrQoJdduF4/+6aJW/GAWSu0e7eC
 zgBwaJjI7ENce8ixJnuEFUxUnaBo8dl72a0PGA1UU8PL+cJNOIpyhPk4goWQprdn
 iFF4ZnjhBRZ2gk/4HGD9u5Vo2lNqP93YS5QhkGkF+HJsBmcOZgidIUpfHhPQvvHO
 Np196T2cAETCWGV1xG4CaTpxN2ndRReq3C0/mzfhIbwhXEACtvAiSlO4KB8t6pJj
 MzinCABXHcovJbGbxZ9j6w==
 =8SdN
 -----END PGP SIGNATURE-----

Merge tag 'pull-target-arm-20230606' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * Support gdbstub (guest debug) in HVF
 * xnlx-versal: Support CANFD controller
 * bpim2u: New board model: Banana Pi BPI-M2 Ultra
 * Emulate FEAT_LSE2
 * allow DC CVA[D]P in user mode emulation
 * trap DCC access in user mode emulation

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmR/AKUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3jzIEACNepQGY44yPhrEG+wD4WAB
# fH670KI33HcsFd2rGsC369gcssQbRIW/29reOzNhRMuol+kHI6OFaONpuKSdO0Rz
# TLVIsnT2Uq8KwbYfLtDQt5knj027amPy75d4re8wIK1eZB4dOIHysqAvQrJYeync
# 9obKku8xXGLwZh/mYHoVgHcZU0cPJO9nri39n1tV3JUBsgmqEURjzbZrMcF+yMX7
# bUzOYQvC1Iedmo+aWfx43u82AlNQFz1lsqmnQj7Z5rvv0HT+BRF5WzVMP0qRh5+Z
# njkqmBH9xb9kkgeHmeMvHpWox+J+obeSmVg/4gDNlJpThmpuU0Vr7EXUN3MBQlV9
# lhyy6zrTwC/BToiQqdT2dnpao9FzXy5exfnqi/py5IuqfjAzSO+p61LlPPZ4cJri
# pCK4yq2gzQXYfrlZkUJipvRMH8Xa4IdQx+w7lXrQoJdduF4/+6aJW/GAWSu0e7eC
# zgBwaJjI7ENce8ixJnuEFUxUnaBo8dl72a0PGA1UU8PL+cJNOIpyhPk4goWQprdn
# iFF4ZnjhBRZ2gk/4HGD9u5Vo2lNqP93YS5QhkGkF+HJsBmcOZgidIUpfHhPQvvHO
# Np196T2cAETCWGV1xG4CaTpxN2ndRReq3C0/mzfhIbwhXEACtvAiSlO4KB8t6pJj
# MzinCABXHcovJbGbxZ9j6w==
# =8SdN
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Jun 2023 02:47:17 AM PDT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [unknown]

* tag 'pull-target-arm-20230606' of https://git.linaro.org/people/pmaydell/qemu-arm: (42 commits)
  target/arm: trap DCC access in user mode emulation
  tests/tcg/aarch64: add DC CVA[D]P tests
  target/arm: allow DC CVA[D]P in user mode emulation
  target/arm: Enable FEAT_LSE2 for -cpu max
  tests/tcg/multiarch: Adjust sigbus.c
  tests/tcg/aarch64: Use stz2g in mte-7.c
  target/arm: Move mte check for store-exclusive
  target/arm: Relax ordered/atomic alignment checks for LSE2
  target/arm: Add SCTLR.nAA to TBFLAG_A64
  target/arm: Check alignment in helper_mte_check
  target/arm: Pass single_memop to gen_mte_checkN
  target/arm: Pass memop to gen_mte_check1*
  target/arm: Hoist finalize_memop out of do_fp_{ld, st}
  target/arm: Hoist finalize_memop out of do_gpr_{ld, st}
  target/arm: Load/store integer pair with one tcg operation
  target/arm: Sink gen_mte_check1 into load/store_exclusive
  target/arm: Use tcg_gen_qemu_{ld, st}_i128 in gen_sve_{ld, st}r
  target/arm: Use tcg_gen_qemu_st_i128 for STZG, STZ2G
  target/arm: Use tcg_gen_qemu_{st, ld}_i128 for do_fp_{st, ld}
  target/arm: Use tcg_gen_qemu_ld_i128 for LDXP
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-06-06 12:11:34 -07:00
Zhuojia Shen
c81e4ab370 tests/tcg/aarch64: add DC CVA[D]P tests
Test execution of DC CVAP and DC CVADP instructions under user mode
emulation.

Signed-off-by: Zhuojia Shen <chaosdefinition@hotmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06 10:19:40 +01:00
Richard Henderson
6a6f429574 tests/tcg/multiarch: Adjust sigbus.c
With -cpu max and FEAT_LSE2, the __aarch64__ section will only raise
an alignment exception when the load crosses a 16-byte boundary.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06 10:19:39 +01:00
Richard Henderson
b7559ff7ce tests/tcg/aarch64: Use stz2g in mte-7.c
We have many other instances of stg in the testsuite;
change these to provide an instance of stz2g.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230530191438.411344-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06 10:19:39 +01:00
Ilya Leoshkevich
2b956244a9 tests/tcg/s390x: Test MXDB and MXDBR
Add a small test to prevent regressions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230601223027.795501-3-iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-06-05 09:48:29 +02:00
Ilya Leoshkevich
be4a4cb429 tests/tcg/s390x: Test single-stepping SVC
Add a small test to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230510230213.330134-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-06-05 07:27:23 +02:00
Ilya Leoshkevich
230976232f tests/tcg/s390x: Test LOCFHR
Add a small test to prevent regressions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230526181240.1425579-5-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-06-05 07:27:23 +02:00
Ilya Leoshkevich
05d000fb4d tests/tcg/s390x: Test LCBB
Add a test to prevent regressions.

Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230526181240.1425579-3-iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-06-05 07:27:23 +02:00
Marco Liebel
3fd49e2217 Hexagon (target/hexagon) Fix assignment to tmp registers
The order in which instructions are generated by gen_insn() influences
assignment to tmp registers. During generation, tmp instructions (e.g.
generate_V6_vassign_tmp) use vreg_src_off() to determine what kind of
register to use as source. If some instruction (e.g.
generate_V6_vmpyowh_64_acc) uses a tmp register but is generated prior
to the corresponding tmp instruction, the vregs_updated_tmp bit map
isn't updated in time.

Exmple:
    { v14.tmp = v16; v25 = v14 } This works properly because
    generate_V6_vassign_tmp is generated before generate_V6_vassign
    and the bit map is updated.

    { v15:14.tmp = vcombine(v21, v16); v25:24 += vmpyo(v18.w,v14.h) }
    This does not work properly because vmpyo is generated before
    vcombine and therefore the bit map does not yet know that there's
    a tmp register.

The parentheses in the decoding function were in the wrong place.
Moving them to the correct location makes shuffling of .tmp vector
registers work as expected.

Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20230522174708.464197-1-quic_mliebel@quicinc.com>
2023-05-26 07:03:41 -07:00
Taylor Simpson
0d57cd61d9 Hexagon (tests/tcg/hexagon) Clean up Hexagon check-tcg tests
Move test infra to header file
    check functions (always print line number on error)
    USR manipulation
    Useful floating point values
Use stdint.h types
Use stdbool.h bool where appropriate
Use trip counts local to for loop

Suggested-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230522174341.1805460-1-tsimpson@quicinc.com>
2023-05-26 07:03:41 -07:00
Richard Henderson
449d6d9eb4 Hexagon update
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
 RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
 KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
 wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
 7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
 Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
 pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
 =1CyJ
 -----END PGP SIGNATURE-----

Merge tag 'pull-hex-20230518-1' of https://github.com/quic/qemu into staging

Hexagon update

# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
# RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
# KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
# wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
# 7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
# Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
# pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
# =1CyJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 12:48:24 PM PDT
# gpg:                using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5  9AB4 7B02 44FB 12DE 4422

* tag 'pull-hex-20230518-1' of https://github.com/quic/qemu: (44 commits)
  Hexagon (linux-user/hexagon): handle breakpoints
  Hexagon (gdbstub): add HVX support
  Hexagon (gdbstub): fix p3:0 read and write via stub
  Hexagon: add core gdbstub xml data for LLDB
  gdbstub: add test for untimely stop-reply packets
  gdbstub: only send stop-reply packets when allowed to
  Remove test_vshuff from hvx_misc tests
  Hexagon (decode): look for pkts with multiple insns at the same slot
  Hexagon (iclass): update J4_hintjumpr slot constraints
  Hexagon: append eflags to unknown cpu model string
  Hexagon: list available CPUs with `-cpu help`
  Hexagon (target/hexagon/*.py): raise exception on reg parsing error
  target/hexagon: fix = vs. == mishap
  Hexagon (target/hexagon) Additional instructions handled by idef-parser
  Hexagon (target/hexagon) Move items to DisasContext
  Hexagon (target/hexagon) Move pkt_has_store_s1 to DisasContext
  Hexagon (target/hexagon) Move pred_written to DisasContext
  Hexagon (target/hexagon) Move new_pred_value to DisasContext
  Hexagon (target/hexagon) Move new_value to DisasContext
  Hexagon (target/hexagon) Make special new_value for USR
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-18 20:44:34 -07:00
Matheus Tavares Bernardino
dae66a3f66 gdbstub: add test for untimely stop-reply packets
In the previous commit, we modified gdbstub.c to only send stop-reply
packets as a response to GDB commands that accept it. Now, let's add a
test for this intended behavior. Running this test before the fix from
the previous commit fails as QEMU sends a stop-reply packet
asynchronously, when GDB was in fact waiting an ACK.

Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <a30d93b9a8d66e9d9294354cfa2fc3af35f00202.1683214375.git.quic_mathbern@quicinc.com>
2023-05-18 12:40:52 -07:00
Marco Liebel
9e6d4938d1 Remove test_vshuff from hvx_misc tests
test_vshuff checks that the vshuff instruction works correctly when
both vector registers are the same. Using vshuff in this way is
undefined and will be rejected by the compiler in a future version of
the toolchain.

Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20230509184231.2467626-1-quic_mliebel@quicinc.com>
2023-05-18 12:40:52 -07:00
Matheus Tavares Bernardino
14edcf11e2 Hexagon (decode): look for pkts with multiple insns at the same slot
Each slot in a packet can be assigned to at most one instruction.
Although the assembler generally ought to enforce this rule, we better
be safe than sorry and also do some check to properly throw an "invalid
packet" exception on wrong slot assignments.

This should also make it easier to debug possible future errors caused
by missing updates to `find_iclass_slots()` rules in
target/hexagon/iclass.c.

Co-authored-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <f8b829443523568823d062adf8bf6659bc6d4a3f.1683552984.git.quic_mathbern@quicinc.com>
2023-05-18 12:40:52 -07:00
Taylor Simpson
163e5fa38e Hexagon (target/hexagon) Additional instructions handled by idef-parser
**** Changes in v3 ****
Fix bugs exposed by dpmpyss_rnd_s0 instruction
    Set correct size/signedness for constants
    Test cases added to tests/tcg/hexagon/misc.c

**** Changes in v2 ****
Fix bug in imm_print identified in clang build

Currently, idef-parser skips all floating point instructions.  However,
there are some floating point instructions that can be handled.

The following instructions are now parsed
    F2_sfimm_p
    F2_sfimm_n
    F2_dfimm_p
    F2_dfimm_n
    F2_dfmpyll
    F2_dfmpylh

To make these instructions work, we fix some bugs in parser-helpers.c
    gen_rvalue_extend
    gen_cast_op
    imm_print
    lexer properly sets size/signedness of constants

Test cases added to tests/tcg/hexagon/fpstuff.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230501203125.4025991-1-tsimpson@quicinc.com>
2023-05-18 12:40:52 -07:00
Taylor Simpson
00e64fda06 Hexagon (target/hexagon) Add overrides for disabled idef-parser insns
The following have overrides
    S2_insert
    S2_insert_rp
    S2_asr_r_svw_trun
    A2_swiz

These instructions have semantics that write to the destination
before all the operand reads have been completed.  Therefore,
the idef-parser versions were disabled with the short-circuit patch.

Test cases added to tests/tcg/hexagon/read_write_overlap.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-16-tsimpson@quicinc.com>
2023-05-18 12:40:52 -07:00
Taylor Simpson
d05d5eebc7 Hexagon (target/hexagon) Short-circuit more HVX single instruction packets
The generated helpers for HVX use pass-by-reference, so they can't
short-circuit when the reads/writes overlap.  The instructions with
overrides are OK because they use tcg_gen_gvec_*.

We add a flag has_hvx_helper to DisasContext and extend gen_analyze_funcs
to set the flag when the instruction is an HVX instruction with a
generated helper.

We add an override for V6_vcombine so that it can be short-circuited
along with a test case in tests/tcg/hexagon/hvx_misc.c

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-15-tsimpson@quicinc.com>
2023-05-18 12:40:52 -07:00
Taylor Simpson
4dd311ed2e Hexagon (tests/tcg/hexagon) Add v73 scalar tests
Tests added for the following instructions
    J2_callrh
    J2_jumprh

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-10-tsimpson@quicinc.com>
2023-05-18 12:40:51 -07:00
Taylor Simpson
6c61d4e138 Hexagon (tests/tcg/hexagon) Add v69 HVX tests
The following instructions are tested
    V6_vasrvuhubrndsat
    V6_vasrvuhubsat
    V6_vasrvwuhrndsat
    V6_vasrvwuhsat
    V6_vassign_tmp
    V6_vcombine_tmp
    V6_vmpyuhvs

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-8-tsimpson@quicinc.com>
2023-05-18 12:40:51 -07:00
Taylor Simpson
d636fb70b2 Hexagon (tests/tcg/hexagon) Add v68 HVX tests
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-6-tsimpson@quicinc.com>
2023-05-18 12:40:51 -07:00
Taylor Simpson
860132e295 Hexagon (tests/tcg/hexagon) Add v68 scalar tests
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-4-tsimpson@quicinc.com>
2023-05-18 12:40:51 -07:00
Taylor Simpson
fc2622f660 Hexagon (target/hexagon) Add support for v68/v69/v71/v73
Add support for the ELF flags
Move target/hexagon/cpu.[ch] to be v73
Change the compiler flag used by "make check-tcg"

The decbin instruction is removed in Hexagon v73, so check the
version before trying to compile the instruction.

Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-2-tsimpson@quicinc.com>
2023-05-18 12:40:51 -07:00
Paolo Bonzini
9e65829699 tests/tcg/i386: correct mask for VPERM2F128/VPERM2I128
The instructions also use bits 3 and 7 of their 8-byte immediate.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-18 08:53:50 +02:00
Ilya Leoshkevich
bfa72590df tests/tcg/s390x: Test EXECUTE of relative branches
Add a small test to prevent regressions.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230426235813.198183-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-16 09:14:18 +02:00
Ilya Leoshkevich
c2485ea402 tests/tcg/s390x: Enable the multiarch system tests
Multiarch tests are written in C and need support for printing
characters. Instead of implementing the runtime from scratch, just
reuse the pc-bios/s390-ccw one.

Run tests with -nographic in order to enable SCLP (enable this for
the existing tests as well, since it does not hurt).

Use the default linker script for the new tests.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230511114651.439872-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-16 09:14:18 +02:00
Ilya Leoshkevich
f8d7c90f83 tests/tcg/multiarch: Make the system memory test work on big-endian
Store the bytes in descending order on big-endian.
Invert the logic in the multi-byte signed tests on big-endian.
Make the checks in the multi-byte signed tests stricter.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230511114651.439872-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-16 09:14:18 +02:00
Shivaprasad G Bhat
0eb9fcc735 tests: tcg: ppc64: Add tests for Vector Extract Mask Instructions
Add test for vextractbm, vextractwm, vextractdm and vextractqm
instructions. Test works for both qemu-ppc64 and qemu-ppc64le.

Based on the test case written by John Platts posted at [1]

References:
[1] - https://gitlab.com/qemu-project/qemu/-/issues/1536

Signed-off-by: John Platts <john_platts@hotmail.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <168319294881.1159309.17060400720026083557.stgit@ltc-boston1.aus.stglabs.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-05-05 12:34:22 -03:00