Like VECTOR REPLICATE, but the element to be replicated comes from an
immediate.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-24-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replicate via the special gvec helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-23-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Read the whole input before modifying the destination vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-22-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Take care of overlying inputs and outputs by using a temporary vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-21-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a big one. Luckily we only have a limited set of such nasty
instructions.
We'll implement all variants with helpers, except when sources and
the destination don't overlap for VECTOR PACK. Provide different helpers
when the cc is to be modified. We'll return the cc then via env->cc_op.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-20-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We cannot use gvec expansion as source and destination elements are
have different element numbers. So we'll expand using a fancy loop.
Also, we have to take care of overlapping source and destination
registers, therefore use a safe evaluation irder depending on the
operation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can reuse the helper introduced along with VECTOR LOAD TO BLOCK
BOUNDARY. We just have to take care of converting the highest index into
a length.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, just load from to gprs into a single vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Very similar to VECTOR LOAD GR FROM VR ELEMENT, just the opposite
direction. Also provide a fast path in case we don't care about the
register content.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Very similar to LOAD COUNT TO BLOCK BOUNDARY, but instead of only
calculating, the actual vector is loaded. Use a temporary vector to
not modify the real vector on exceptions. Initialize that one to zero,
to not leak any data. Provide a fast path if we're loading a full
vector.
As we don't have gvec ool handlers for single vectors, just calculate
the vector address manually.
We can reuse the helper later on for VECTOR LOAD WITH LENGTH. In fact,
we are going to name it "vll" right from the beginning, because that's
a better match.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Try to load the last element first. Access to the first element will
be checked afterwards. This way, we can guarantee that the vector is
not modified before we checked for all possible exceptions. (16 vectors
cannot cross more than two pages)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, zero out the vector before we load the desired element.
Load the element before touching the vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
To avoid an helper, we have to do the actual calculation of the element
address (offset in cpu_env + cpu_env) manually. Factor that out into
get_vec_element_ptr_i64(). The same logic will be reused for "VECTOR
LOAD VR ELEMENT FROM GR".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Take care of properly sign-extending the immediate.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, load with desired size and store it into the right element.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can use tcg_gen_gvec_dup_i64() to carry out the duplication.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When loading from memory, load both elements into temps first before
modifying the target vector
Loading with strange alingment from the end of the address space will
not properly wrap, we can ignore that for now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add gen_gvec_dupi() for handling duplication of immediates, so it can
be reused later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's optimize it for the common cases (setting a vector to zero or all
ones) - courtesy of Richard.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's start with a more involved one, but it is the first in the list
of vector support instructions (introduced with the vector facility).
Good thing is, we need a lot of basic infrastructure for this. Reading
and writing vector elements as well as checking element validity.
All vector instruction related translation functions will reside in
translate_vx.inc.c, to be included in translate.c - similar to how
other architectures handle it.
While at it, directly add some documentation (which contains parts about
things added in follow-up patches, but splitting this up does not make
too much sense). Also add ES_* defines heavily used later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We'll have to read/write vector elements quite frequently from helpers.
The tricky bit is properly taking care of endianess. Handle it similar
to aarch64.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Check them at a central point. We'll use a new instruction flag to
flag all vector instructions (IF_VEC) and handle it very similar to
AFP, whereby we use another unused position in the PSW mask to store
the state of vector register enablement per translation block.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
These are the new instruction formats related to vector instructions as
up to the z14 (a.k.a. latest PoP).
As v2 appeares (like x2 in VRX) with d2/b2 in VRV, we have to assign it a
higher field number to avoid collisions.
Properly take care of the MSB (to be able to address 32 registers) for
each vector register field stored in the RXB field (Bit 36 - 30 for all
vector instructions). As we have 32 bit vector registers and the
"v" fields are only 4 bit in size, the 5th bit is stored in the RXB.
We use a new type to indicate that the MSB has to be fetched from the
RXB.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There are some fields in our struct LowCore which apparently have
been copied from a very old version of the Linux kernel. These
fields are not architected in the "Principles of Operation", and
only used on these memory locations in Linux kernels older than
2.6.29. Newer Linux kernels moved the entries to different locations
or are not using them at all anymore. Thus we should never access
these fields from the QEMU side, so they should be removed.
While we're at it, also add a QEMU_BUILD_BUG_ON() statement to
assert that struct LowCore has the right size.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1551775581-27989-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
-----BEGIN PGP SIGNATURE-----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=GCRI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
# gpg: Signature made Fri 08 Mar 2019 12:54:27 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
qcow2 spec: Describe string header extensions
qemu-iotests: Add dependency to qemu-nbd tool
ahci-test: Add dependency to qemu-img tool
qemu-iotests: amend with external data file
qemu-iotests: General tests for qcow2 with external data file
qemu-iotests: Preallocation with external data file
qcow2: Implement data-file-raw create option
qcow2: Store data file name in the image
qcow2: Creating images with external data file
qcow2: Add basic data-file infrastructure
qcow2: Support external data file in qemu-img check
qcow2: Return error for snapshot operation with data file
qcow2: External file I/O
qcow2: Prepare qcow2_co_block_status() for data file
qcow2: Return 0/-errno in qcow2_alloc_compressed_cluster_offset()
qcow2: Don't assume 0 is an invalid cluster offset
qcow2: Prepare count_contiguous_clusters() for external data file
qcow2: Prepare qcow2_get_cluster_type() for external data file
qcow2: Pass bs to qcow2_get_cluster_type()
qcow2: Basic definitions for external data files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Be more specific about the string representation in header extensions.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Since a9660664fd, some iotests use qemu-nbd.
Add a dependency to build it before using it.
This fixes:
$ make check-block
GEN qemu-img-cmds.h
CC qemu-img.o
LINK qemu-img
CC qemu-io.o
LINK qemu-io
CC tests/qemu-iotests/socket_scm_helper.o
LINK tests/qemu-iotests/socket_scm_helper
tests/qemu-iotests-quick.sh
check: qemu-nbd not found
make: *** [tests/Makefile.include:1059: check-tests/qemu-iotests-quick.sh] Error 1
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the ahci-test uses qemu-img, add a dependency to build it
before using it.
This fixes:
$ gmake check-qtest V=1
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ahci-test
Failed to execute child process "/tmp/qemu-test.19tMRF/qemu-img" (No such file or directory)
ERROR:tests/libqos/libqos.c:192:mkimg: assertion failed: (ret && !err)
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that preallocating metadata results in a somewhat larger qcow2
file, but preallocating data only affects the disk usage of the data
file and the qcow2 file stays small.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Provide an option to force QEMU to always keep the external data file
consistent as a standalone read-only raw image.
At the moment, this means making sure that write_zeroes requests are
forwarded to the data file instead of just updating the metadata, and
checking that no backing file is used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than requiring that the external data file node is passed
explicitly when creating the qcow2 node, store the filename in the
designated header extension during .bdrv_create and read it from there
as a default during .bdrv_open.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For external data files, data clusters must be excluded from the
refcount calculations. Instead, an implicit refcount of 1 is assumed for
the COPIED flag.
Compressed clusters and internal snapshots are incompatible with
external data files, so print an error if they are in use for images
with an external data file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Internal snapshots and an external data file are incompatible because
snapshots require refcounting and non-linear mapping. Return an error
for all of the snapshot operations if an external data file is in use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This changes the qcow2 implementation to direct all guest data I/O to
s->data_file rather than bs->file, while metadata I/O still uses
bs->file. At the moment, this is still always the same, but soon we'll
add options to set s->data_file to an external data file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Offset 0 cannot be assumed to mean an unallocated cluster any more.
Instead, the cluster type needs to be checked.
*file must refer to the data file instead of the image file if a valid
offset is returned from qcow2_co_block_status().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_alloc_compressed_cluster_offset() used to return the cluster
offset for success and 0 for error. This doesn't only conflict with 0 as
a valid host offset, but also loses the error code.
Similar to the change made to qcow2_alloc_cluster_offset() for
uncompressed clusters in commit 148da7ea9d, make the function return
0/-errno and return the allocated cluster offset in a by-reference
parameter.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The cluster allocation code uses 0 as an invalid offset that is used in
case of errors or as "offset not yet determined". With external data
files, a host cluster offset of 0 becomes valid, though.
Define a constant INV_OFFSET (which is not cluster aligned and will
therefore never be a valid offset) that can be used for such purposes.
This removes the additional host_offset == 0 check that commit
ff52aab2df introduced; the confusion between an invalid offset and
(erroneous) allocation at offset 0 is removed with this change.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
