Pick names that align with the section drivers should use them from,
avoiding the confusion of calling a _finalize() function from _exit()
and generalizing the actual _finalize() to handle removing the viommu
blocker.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/167820912978.606734.12740287349119694623.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that everything has been set up for device dirty page tracking,
query the device for device dirty page tracking support.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-15-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Migrating with vIOMMU will require either tracking maximum
IOMMU supported address space (e.g. 39/48 address width on Intel)
or range-track current mappings and dirty track the new ones
post starting dirty tracking. This will be done as a separate
series, so add a live migration blocker until that is fixed.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-14-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add device dirty page bitmap sync functionality. This uses the device
DMA logging uAPI to sync dirty page bitmap from the device.
Device dirty page bitmap sync is used only if all devices within a
container support device dirty page tracking.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-13-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Extract the VFIO_IOMMU_DIRTY_PAGES ioctl code in vfio_get_dirty_bitmap()
to its own function.
This will help the code to be more readable after next patch will add
device dirty page bitmap sync functionality.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-12-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add device dirty page tracking start/stop functionality. This uses the
device DMA logging uAPI to start and stop dirty page tracking by device.
Device dirty page tracking is used only if all devices within a
container support device dirty page tracking.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230307125450.62409-11-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
According to the device DMA logging uAPI, IOVA ranges to be logged by
the device must be provided all at once upon DMA logging start.
As preparation for the following patches which will add device dirty
page tracking, keep a record of all DMA mapped IOVA ranges so later they
can be used for DMA logging start.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-10-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In preparation to be used in device dirty tracking, move the code that
calculate a iova/end range from the container/section. This avoids
duplication on the common checks across listener callbacks.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-9-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The checks are replicated against region_add and region_del
and will be soon added in another memory listener dedicated
for dirty tracking.
Move these into a new helper for avoid duplication.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20230307125450.62409-8-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In preparation to turn more of the memory listener checks into
common functions, one of the affected places is how we trace when
sections are skipped. Right now there is one for each. Change it
into one single tracepoint `vfio_listener_region_skip` which receives
a name which refers to the callback i.e. region_add and region_del.
Suggested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-7-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the code that finds the container host DMA window against a iova
range. This avoids duplication on the common checks across listener
callbacks.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20230307125450.62409-6-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are already two places where dirty page bitmap allocation and
calculations are done in open code.
To avoid code duplication, introduce VFIOBitmap struct and corresponding
alloc function and use them where applicable.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-5-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If VFIO dirty pages log start/stop/sync fails during migration,
migration should be aborted as pages dirtied by VFIO devices might not
be reported properly.
This is not the case today, where in such scenario only an error is
printed.
Fix it by aborting migration in the above scenario.
Fixes: 758b96b61d ("vfio/migrate: Move switch of dirty tracking into vfio_memory_listener")
Fixes: b6dd6504e3 ("vfio: Add vfio_listener_log_sync to mark dirty pages")
Fixes: 9e7b0442f2 ("vfio: Add ioctl to get dirty pages bitmap during dma unmap")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-4-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are several places where the %m conversion is used if one of
vfio_dma_map(), vfio_dma_unmap() or vfio_get_dirty_bitmap() fail.
The %m usage in these places is wrong since %m relies on errno value while
the above functions don't report errors via errno.
Fix it by using strerror() with the returned value instead.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-3-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use the VFIO_CCW() QOM type-checking macro to avoid DO_UPCAST().
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213170145.45666-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QOM parenthood relationship is:
VFIOCCWDevice -> S390CCWDevice -> CcwDevice -> DeviceState
No need to double-cast, call CCW_DEVICE() on VFIOCCWDevice.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20230213170145.45666-6-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the S390_CCW_DEVICE() QOM type-checking macro to avoid DO_UPCAST().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213170145.45666-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'cdev' is VFIOCCWDevice's private parent object.
Access it using the S390_CCW_DEVICE() QOM macro.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20230213170145.45666-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QOM parenthood relationship is:
VFIOCCWDevice -> S390CCWDevice -> CcwDevice -> DeviceState
We can directly use the QOM DEVICE() macro to get the parent object.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20230213170145.45666-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Sort the migration section of VFIO trace events file alphabetically
and move two misplaced traces to common.c section.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-11-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that v2 protocol implementation has been added, remove the
deprecated v1 implementation.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-10-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Implement the basic mandatory part of VFIO migration protocol v2.
This includes all functionality that is necessary to support
VFIO_MIGRATION_STOP_COPY part of the v2 protocol.
The two protocols, v1 and v2, will co-exist and in the following patches
v1 protocol code will be removed.
There are several main differences between v1 and v2 protocols:
- VFIO device state is now represented as a finite state machine instead
of a bitmap.
- Migration interface with kernel is now done using VFIO_DEVICE_FEATURE
ioctl and normal read() and write() instead of the migration region.
- Pre-copy is made optional in v2 protocol. Support for pre-copy will be
added later on.
Detailed information about VFIO migration protocol v2 and its difference
compared to v1 protocol can be found here [1].
[1]
https://lore.kernel.org/all/20220224142024.147653-10-yishaih@nvidia.com/
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>.
Link: https://lore.kernel.org/r/20230216143630.25610-9-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
To avoid name collisions, rename functions and structs related to VFIO
migration protocol v1. This will allow the two protocols to co-exist
when v2 protocol is added, until v1 is removed. No functional changes
intended.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-8-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move vfio_dev_get_region_info() logic from vfio_migration_probe() to
vfio_migration_init(). This logic is specific to v1 protocol and moving
it will make it easier to add the v2 protocol implementation later.
No functional changes intended.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-7-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently VFIO migration doesn't implement some kind of intermediate
quiescent state in which P2P DMAs are quiesced before stopping or
running the device. This can cause problems in multi-device migration
where the devices are doing P2P DMAs, since the devices are not stopped
together at the same time.
Until such support is added, block migration of multiple devices.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-6-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_devices_all_running_and_saving() is used to check if migration is
in pre-copy phase. This is done by checking if migration is in setup or
active states and if all VFIO devices are in pre-copy state, i.e.
_SAVING | _RUNNING.
In VFIO migration protocol v2 pre-copy support is made optional. Hence,
a matching v2 protocol pre-copy state can't be used here.
As preparation for adding v2 protocol, change
vfio_devices_all_running_and_saving() logic such that it doesn't use the
VFIO pre-copy state.
The new equivalent logic checks if migration is in active state and if
all VFIO devices are in running state [1]. No functional changes
intended.
[1] Note that checking if migration is in setup or active states and if
all VFIO devices are in running state doesn't guarantee that we are in
pre-copy phase, thus we check if migration is only in active state.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-5-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, if IOMMU of a VFIO container doesn't support dirty page
tracking, migration is blocked. This is because a DMA-able VFIO device
can dirty RAM pages without updating QEMU about it, thus breaking the
migration.
However, this doesn't mean that migration can't be done at all.
In such case, allow migration and let QEMU VFIO code mark all pages
dirty.
This guarantees that all pages that might have gotten dirty are reported
back, and thus guarantees a valid migration even without VFIO IOMMU
dirty tracking support.
The motivation for this patch is the introduction of iommufd [1].
iommufd can directly implement the /dev/vfio/vfio container IOCTLs by
mapping them into its internal ops, allowing the usage of these IOCTLs
over iommufd. However, VFIO IOMMU dirty tracking is not supported by
this VFIO compatibility API.
This patch will allow migration by hosts that use the VFIO compatibility
API and prevent migration regressions caused by the lack of VFIO IOMMU
dirty tracking support.
[1]
https://lore.kernel.org/kvm/0-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com/
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-4-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As part of its error flow, vfio_vmstate_change() accesses
MigrationState->to_dst_file without any checks. This can cause a NULL
pointer dereference if the error flow is taken and
MigrationState->to_dst_file is not set.
For example, this can happen if VM is started or stopped not during
migration and vfio_vmstate_change() error flow is taken, as
MigrationState->to_dst_file is not set at that time.
Fix it by checking that MigrationState->to_dst_file is set before using
it.
Fixes: 02a7e71b1e ("vfio: Add VM state change handler to know state of VM")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Link: https://lore.kernel.org/r/20230216143630.25610-3-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Once that res_compatible is removed, they don't make sense anymore.
We remove the _only preffix. And to make things clearer we rename
them to must_precopy and can_postcopy.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Nothing assigns to it after previous commit.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Until previous commit, save_live_pending() was used for ram. Now with
the split into state_pending_estimate() and state_pending_exact() it
is not needed anymore, so remove them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We split the function into to:
- state_pending_estimate: We estimate the remaining state size without
stopping the machine.
- state pending_exact: We calculate the exact amount of remaining
state.
The only "device" that implements different functions for _estimate()
and _exact() is ram.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
=zTCn
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci,pc,virtio: features, tests, fixes, cleanups
lots of acpi rework
first version of biosbits infrastructure
ASID support in vhost-vdpa
core_count2 support in smbios
PCIe DOE emulation
virtio vq reset
HMAT support
part of infrastructure for viommu support in vhost-vdpa
VTD PASID support
fixes, tests all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmNpXDkPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpD0AH/2G8ZPrgrxJC9y3uD5/5J6QRzO+TsDYbg5ut
# uBf4rKSHHzcu6zdyAfsrhbAKKzyD4HrEGNXZrBjnKM1xCiB/SGBcDIWntwrca2+s
# 5Dpbi4xvd4tg6tVD4b47XNDCcn2uUbeI0e2M5QIbtCmzdi/xKbFAfl5G8DQp431X
# Kmz79G4CdKWyjVlM0HoYmdCw/4FxkdjD02tE/Uc5YMrePNaEg5Bw4hjCHbx1b6ur
# 6gjeXAtncm9s4sO0l+sIdyiqlxiTry9FSr35WaQ0qPU+Og5zaf1EiWfdl8TRo4qU
# EAATw5A4hyw11GfOGp7oOVkTGvcNB/H7aIxD7emdWZV8+BMRPKo=
# =zTCn
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 07 Nov 2022 14:27:53 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (83 commits)
checkpatch: better pattern for inline comments
hw/virtio: introduce virtio_device_should_start
tests/acpi: update tables for new core count test
bios-tables-test: add test for number of cores > 255
tests/acpi: allow changes for core_count2 test
bios-tables-test: teach test to use smbios 3.0 tables
hw/smbios: add core_count2 to smbios table type 4
vhost-user: Support vhost_dev_start
vhost: Change the sequence of device start
intel-iommu: PASID support
intel-iommu: convert VTD_PE_GET_FPD_ERR() to be a function
intel-iommu: drop VTDBus
intel-iommu: don't warn guest errors when getting rid2pasid entry
vfio: move implement of vfio_get_xlat_addr() to memory.c
tests: virt: Update expected *.acpihmatvirt tables
tests: acpi: aarch64/virt: add a test for hmat nodes with no initiators
hw/arm/virt: Enable HMAT on arm virt machine
tests: Add HMAT AArch64/virt empty table files
tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT:
tests: acpi: q35: add test for hmat nodes without initiators
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Move the implement vfio_get_xlat_addr to softmmu/memory.c, and
change the name to memory_get_xlat_addr(). So we can use this
function on other devices, such as vDPA device.
- Add a new function vfio_get_xlat_addr in vfio/common.c, and it will check
whether the memory is backed by a discard manager. then device can
have its own warning.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221031031020.1405111-2-lulu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vfio_migration_init() initializes VFIOMigration->device_state using enum
of VFIO migration protocol v2. Current implemented protocol is v1 so v1
enum should be used. Fix it.
Fixes: 429c728006 ("vfio/migration: Fix incorrect initialization value for parameters in VFIOMigration")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Link: https://lore.kernel.org/r/20221016085752.32740-1-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
On error, vfio_get_iommu_info() frees and clears *info, but
vfio_connect_container() continues to use the pointer regardless
of the return value. Restructure the code such that a failure
of this function triggers an error and clean up the remainder of
the function, including updating an outdated comment that had
drifted from its relevant line of code and using host page size
for a default for better compatibility on non-4KB systems.
Reported-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/all/20220910004245.2878-1-nicolinc@nvidia.com/
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/166326219630.3388898.12882473157184946072.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The structure VFIOMigration of a VFIODevice is allocated and initialized
in vfio_migration_init(). "device_state" and "vm_running" are initialized
to 0, indicating that VFIO device is_STOP and VM is not-running. The
initialization value is incorrect. According to the agreement, default
state of VFIO device is _RUNNING. And if a VFIO device is hot-plugged
while the VM is running, "vm_running" should be 1. This patch fixes it.
Fixes: 02a7e71b1e ("vfio: Add VM state change handler to know state of VM")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/r/20220711014651.1327-1-jiangkunkun@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The returned value is not used and misleading.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20220226115516.59830-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
851d6d1a0f ("vfio/common: remove spurious tpm-crb-cmd misalignment
warning") removed the warning on vfio_listener_region_add() path.
However the same warning also hits on region_del path. Let's remove
it and reword the dynamic trace as this can be called on both
map and unmap path.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220524091405.416256-1-eric.auger@redhat.com
Fixes: 851d6d1a0f ("vfio/common: remove spurious tpm-crb-cmd misalignment warning")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The QOM API already provides getters for uint64 and uint32 values, so reuse
them.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301225220.239065-2-shentey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update to c5eb0a61238d ("Linux 5.18-rc6"). Mechanical search and
replace of vfio defines with white space massaging.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Rename VFIOGuestIOMMU iommu field into iommu_mr. Then it becomes clearer
it is an IOMMU memory region.
no functional change intended
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-4-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Using a VFIODevice handle local variable to improve the code readability.
no functional change intended
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
"%m" format specifier is not interpreted by the trace infrastructure
and thus "%m" is output instead of the actual errno string. Fix it by
outputting strerror(errno).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-2-yi.l.liu@intel.com
[aw: replace commit log as provided by Eric]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The CRB command buffer currently is a RAM MemoryRegion and given
its base address alignment, it causes an error report on
vfio_listener_region_add(). This region could have been a RAM device
region, easing the detection of such safe situation but this option
was not well received. So let's add a helper function that uses the
memory region owner type to detect the situation is safe wrt
the assignment. Other device types can be checked here if such kind
of problem occurs again.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-3-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It uses [offset, offset + size - 1] to indicate that the length of range is
size in most places in vfio trace code (such as
trace_vfio_region_region_mmap()) execpt trace_vfio_region_sparse_mmap_entry().
So change it for trace_vfio_region_sparse_mmap_entry(), but if size is zero,
the trace will be weird with an underflow, so move the trace and trace it
only if size is not zero.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1650100104-130737-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
