After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation. Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* remotes/bonzini/scsi-next:
megasas: remove buildtime strings
block: iscsi build fix if LIBISCSI_FEATURE_IOVECTOR is not defined
virtio-scsi: Plug memory leak on virtio_scsi_push_event() error path
scsi: Document intentional fall through in scsi_req_length()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using __DATE__ or __TIME__ in binary pkgs changes the checksum of
compiled binaries if they get rebuilt, even if there are no other
source changes. Replace the dynamic strings with some equally
informative static strings.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* remotes/bonzini/scsi-next:
[PATCH] block/iscsi: bump year in copyright notice
block/iscsi: allow cluster_size of 4K and greater
block/iscsi: clarify the meaning of ISCSI_CHECKALLOC_THRES
block/iscsi: speed up read for unallocated sectors
block/iscsi: allow fall back to WRITE SAME without UNMAP
MAINTAINERS: mark megasas as maintained
megasas: Add MSI support
megasas: Enable MSI-X support
megasas: Implement LD_LIST_QUERY
scsi: Improve error messages more
scsi-disk: Improve error messager if can't get version number
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
CVE-2013-4542
hw/scsi/scsi-bus.c invokes load_request.
virtio_scsi_load_request does:
qemu_get_buffer(f, (unsigned char *)&req->elem, sizeof(req->elem));
this probably can make elem invalid, for example,
make in_num or out_num huge, then:
virtio_scsi_parse_req(s, vs->cmd_vqs[n], req);
will do:
if (req->elem.out_num > 1) {
qemu_sgl_init_external(req, &req->elem.out_sg[1],
&req->elem.out_addr[1],
req->elem.out_num - 1);
} else {
qemu_sgl_init_external(req, &req->elem.in_sg[1],
&req->elem.in_addr[1],
req->elem.in_num - 1);
}
and this will access out of array bounds.
Note: this adds security checks within assert calls since
SCSIBusInfo's load_request cannot fail.
For now simply disable builds with NDEBUG - there seems
to be little value in supporting these.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Some hardware instances do support MSI, so we should do likewise.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSI-X support has been fixed in qemu, so we can enable it again.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[Do not change VMSTATE_PCI_DEVICE to PCIE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Newer firmware implement a LD_LIST_QUERY command, and due to a driver
issue no drives might be detected if this command isn't supported.
So add emulation for this command, too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the "scsi-block:" prefix for error messages as suggested
by Markus.
Improve the previous patch by making the message the same for both
scsi-block and scsi-generic, including the strerror() output in both
and making an explicit reference to SG_IO. Also s/can not/cannot/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
More often it is that bdrv_ioctl fails due to not supported by driver or
whatever reason, in this case we should be specific, because "interface
too old" is very confusing.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This assertion is invalid, because get_sg_list can return an
empty sg-list even for commands that transfer no data (such
as SYNCHRONIZE CACHE).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
c5f52875 changed the size of sense array in vmstate_scsi_device by
mistake. This patch restores the old size, and add a subsection for the
remaining part of the buffer size. So that migration is not broken.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Normally VIOSRP_OK (0) means success and non-zero value means error
except VIOSRP_OK2 (0x99) which is another success code by weird accident.
This uses 0 as success code always as some guests do not cope with
the 0x99 value well. The existing linux driver checks for both VIOSRP_OK
and VIOSRP_OK2 since 2.6.32.
This returns non-zero code (VIOSRP_ADAPTER_FAIL == 0x10) on errors which
can only happen if DMA write failed.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intercept REPORT_LUNS commands addressed either to SRP LUN 0 or the well-known
LUN for REPORT_LUNS commands. This is required to implement the SAM and SPC
specifications.
Since SRP implements only a single SCSI target port per connection, the SRP
target is required to report all available LUNs in response to a REPORT_LUNS
command addressed either to LUN 0 or the well-known LUN. Instead, QEMU was
forwarding such requests to the first QEMU SCSI target, with the result that
initiators that relied on this feature would only see LUNs on the first QEMU
SCSI target.
Behavior for REPORT_LUNS commands addressed to any other LUN is not specified
by the standard and so is left unchanged. This preserves behavior under Linux
and SLOF, which enumerate possible LUNs by hand and so address no commands
either to LUN 0 or the well-known REPORT_LUNS LUN.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[agraf: define constant as ULL for 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
To make a VM more convincing to my application, it's useful to be able
to add a port WWN and relative target port index to the descriptors
returned for VPD page 83h. Add device properties to allow setting
these, and return them from INQUIRY commands.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The transfer length depends on field BYTCHK, which is encoded in byte
1, bits 1..2. However, the guard for for case BYTCHK=11b doesn't
work, and we get case 01b instead. Fix it.
Note that since emulated scsi-hd fails the command outright, it takes
SCSI passthrough of a device that actually implements VERIFY with
BYTCHK=11b to make the bug bite.
Screwed up in commit d12ad44. Spotted by Coverity.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SCSI defines a status code for when a thin-provisioned LUNs would
exceed the allocated space, map ENOSPC to it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current buffer size fails the assersion check in like
hw/scsi/scsi-bus.c:1655: assert(req->sense_len <= sizeof(req->sense));
when backend (block/iscsi.c) returns more data then 96.
Exercise the core dump path by booting an Gentoo ISO with scsi-generic
device backed with iscsi (built with libiscsi 1.7.0):
x86_64-softmmu/qemu-system-x86_64 \
-drive file=iscsi://localhost:3260/iqn.foobar/0,if=none,id=drive-disk \
-device virtio-scsi-pci,id=scsi1,bus=pci.0,addr=0x6 \
-device scsi-generic,drive=drive-disk,bus=scsi1.0,id=iscsi-disk \
-boot d \
-cdrom gentoo.iso
qemu-system-x86_64: hw/scsi/scsi-bus.c:1655: scsi_req_complete:
Assertion `req->sense_len <= sizeof(req->sense)' failed.
According to SPC-4, section 4.5.2.1, 252 is the limit of sense data. So
increase the value to fix it.
Also remove duplicated define for the macro.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace them with uint8/32/64.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* bonzini/scsi-next:
scsi: Support TEST UNIT READY in the dummy LUN0
block: add .bdrv_reopen_prepare() stub for iscsi
virtio-scsi: Prevent assertion on missed events
virtio-scsi: Cleanup of I/Os that never started
scsi: Assign cancel_io vector for scsi_disk_emulate_ops
Conflicts:
block/iscsi.c
aliguori: resolve trivial merge conflict in block/iscsi.c
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The alignment field is now set to the value that is promised to the
guest, rather than required by the host. The next patches will make
QEMU aware of the host-provided values, so make this clear.
The alignment is also not about memory buffers, but about the sectors on
the disk, change the documentation of the field.
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
SeaBIOS waits for LUN0 to respond to the TEST UNIT READY command
in order to decide whether it should part of the boot sequence.
If LUN0 does not respond to the command, boot is delayed by up
to 5 seconds. This currently happens when there is no LUN0 on
a target. Fix that by adding a trivial implementation of the
command.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, an unplug can cause events to be dropped, which
leads to an assertion failure when preparing to notify the guest
kernel.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is still a small window that occurs when a cancel I/O affects
an asynchronous I/O operation that hasn't started. In other words,
when the residual data length equals the expected data length.
Today, the routine virtio_scsi_command_complete fails because the
VirtIOSCSIReq pointer (from the hba_private field in SCSIRequest)
was cleared earlier when virtio_scsi_complete_req was called by
the virtio_scsi_request_cancelled routine. As a result, the
virtio_scsi_command_complete routine needs to simply return when
it is processing a SCSIRequest block that was marked canceled.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some emulated disk operations (MODE SELECT, UNMAP, WRITE SAME)
can trigger asynchronous I/Os. Provide the cancel_io callback
to ensure that AIOCBs are properly cleaned up.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
[Tweak commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux prefers WRITE SAME to UNMAP if the limits are zero, and WRITE
SAME does not discard anything unless the device can guarantee that
the resulting block is zero.
Setting the maximum unmap block and descriptor counts to non-zero
makes Linux choose UNMAP and fixes thin provisioning on glusterfs.
While the maximum unmap block count can have some effect on performance,
the (suggested) maximum number of descriptors is not particularly
important so I didn't add a customization option. SCSI drivers are
used to online firmware updates so I'm not yet adding versioning support
for SCSI, but we're probably getting close to the point when it's worth
thinking about it.
Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Paolo Bonzini (4) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
help: add id suboption to -iscsi
scsi-disk: fix WRITE SAME with large non-zero payload
block/iscsi: introduce bdrv_co_{readv, writev, flush_to_disk}
scsi-disk: fix VERIFY emulation
scsi-bus: fix transfer length and direction for VERIFY command
Message-id: 1386594157-17535-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Rename qdev -> dev since that's what realize's argument is called by
convention. No need to keep more "qdev" around than necessary.
Avoid duplicate VIRTIO_DEVICE() cast.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VERIFY emulation was completely botched (and remained botched through
all the refactorings). The command must be emulated both in check-medium
mode (BYTCHK=00, which we implement by doing nothing) and in check-bytes
mode (which we do not implement yet). Unlike WRITE AND VERIFY (which we
treat simply as WRITE with FUA bit set), VERIFY cannot be handled like
READ. In fact the device is _receiving_ data for VERIFY, not _sending_
it like READ.
Cc: qemu-stable@nongnu.org
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The amount of bytes to transfer depends on the BYTCHK field.
If any data is transferred, it is sent to the device.
Cc: qemu-stable@nongnu.org
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Paolo Bonzini (17) and others
# Via Stefan Hajnoczi
* stefanha/block: (48 commits)
qemu-iotests: filter QEMU monitor \r\n
aio: make aio_poll(ctx, true) block with no fds
block: clean up bdrv_drain_all() throttling comments
qcow2: use start_of_cluster() and offset_into_cluster() everywhere
qemu-img: decrease progress update interval on convert
qemu-img: round down request length to an aligned sector
qemu-img: dynamically adjust iobuffer size during convert
block/iscsi: set bs->bl.opt_transfer_length
block: add opt_transfer_length to BlockLimits
block/iscsi: set bdi->cluster_size
qemu-img: fix usage instruction for qemu-img convert
qemu-img: add support for skipping zeroes in input during convert
qemu-nbd: add doc for option -f
qemu-iotests: add test for snapshot in qemu-img convert
qemu-img: add -l for snapshot in convert
qemu-iotests: add 058 internal snapshot export with qemu-nbd case
qemu-nbd: support internal snapshot export
snapshot: distinguish id and name in load_tmp
qemu-iotests: Split qcow2 only cases in 048
qemu-iotests: Clean up spaces in usage output
...
Message-id: 1386347807-27359-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
