Let's do it just like the other architectures. Introduce kvm-stub.c
for stubs and kvm_s390x.h for the declarations.
Change license to GPL2+ and keep copyright notice.
As we are dropping the sysemu/kvm.h include from cpu.h, fix up includes.
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170818114353.13455-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we do not provide zpci, pci reconfiguration via sclp is not available
either. I/O adapter configuration, however, should always be present.
Rename the values that refer to I/O adapter configuration (instead of only
pci) to make things clearer.
Move length checking of the sccb for I/O adapter configuration into the
common sclp code (out of the pci code). This also fixes an issue that
the pci code would refer to a field in the sccb before checking whether
it was actually long enough.
Check for the adapter type in the sccb and return unrecognized adapter
type if the guest tries to issue I/O adapter configure/deconfigure for
a type other than pci or for pci if the zpci facility is not provided.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some non-pci code calls into zpci code. Provide some stubs for builds
without pci.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The msi routing code in kvm calls some pci functions: provide
some stubs to enable builds without pci.
Also, to make this more obvious, guard them via a pci_available boolean
(which also can be reused in other places).
Fixes: e1d4fb2de ("kvm-irqchip: x86: add msi route notify fn")
Fixes: 767a554a0 ("kvm-all: Pass requester ID to MSI routing functions")
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
A successful completion of rchp should signal a solicited channel path
initialized CRW (channel report word), while the current implementation
always generates an un-solicited one. Let's fix this.
Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170803003527.86979-3-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's use a macro for the ERC (error recover code) when generating a
Channel Subsystem Event-information pending CRW (channel report word).
While we are at it, let's also add all other ERCs.
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170803003527.86979-2-bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
QEMU currently crashes when trying to use a 'pc-dimm' on the pseries
machine without specifying its 'memdev' property. This happens because
pc_dimm_get_memory_region() does not check whether the 'memdev' property
has properly been set by the user. Looking closer at this function, it's
also obvious that it is using &error_abort to call another function - and
this is bad in a function that is used in the hot-plugging calling chain
since this can also cause QEMU to exit unexpectedly.
So let's fix these issues in a proper way now: Add a "Error **errp"
parameter to pc_dimm_get_memory_region() which we use in case the 'memdev'
property has not been set by the user, and which we can use instead of
the &error_abort, and change the callers of get_memory_region() to make
use of this "errp" parameter for proper error checking.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
MIPS KVM trap & emulate guest kernels have a different segment layout
compared with traditional MIPS kernels, to allow both the user and
kernel code to run from the user address segment without repeatedly
trapping to KVM.
QEMU currently supports this layout only for KVM, but its sometimes
useful to be able to run these kernels in QEMU on a PC, so enable it for
TCG too.
This also paves the way for MIPS KVM VZ support (which uses the normal
virtual memory layout) by abstracting whether user mode kernel segments
are in use.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
[Yongbok Kim:
minor change]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
It was cached by read/write separately. Let's merge them.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----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=75E9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170718' into staging
migration/next for 20170718
# gpg: Signature made Tue 18 Jul 2017 16:39:33 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20170718:
migration: check global caps for validity
migration: provide migrate_cap_add()
migration: provide migrate_caps_check()
migration: remove check against colo support
migration: check global params for validity
migration: provide migrate_params_apply()
migration: introduce migrate_params_check()
migration: export capabilities to props
migration: export parameters to props
qdev: provide DEFINE_PROP_INT64()
migration/rdma: Send error during cancelling
migration/rdma: Safely convert control types
migration/rdma: Allow cancelling while waiting for wrid
migration/rdma: fix qemu_rdma_block_for_wrid error paths
migration: Close file on failed migration load
migration/rdma: Fix race on source
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we have a system with xenforeignmemory_map2() implemented
we don't need to save/restore physmap on suspend/restore
anymore. In case we resume a VM without physmap - try to
recreate the physmap during memory region restore phase and
remap map cache entries accordingly. The old code is left
for compatibility reasons.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
This new call is trying to update a requested map cache entry
according to the changes in the physmap. The call is searching
for the entry, unmaps it and maps again at the same place using
a new guest address. If the mapping is dummy this call will
make it real.
This function makes use of a new xenforeignmemory_map2() call
with an extended interface that was recently introduced in
libxenforeignmemory [1].
[1] https://www.mail-archive.com/xen-devel@lists.xen.org/msg113007.html
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Complete the split by renaming ahci_public.h --> ahci.h and
moving the current ahci.h to hw/ide/ahci_internal.h.
Adjust ahci_internal.h to now load ahci.h instead of ahci_public.h.
Finalize the split by switching external users to the new header.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170623220926.11479-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Begin separating the public/private interface by removing the minimum
set of information used by code outside of hw/ide/ and calling this
a new ahci_public.h file, which will be renamed to ahci.h in a future
patch.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170623220926.11479-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of reaching into the PCI state, allow the AHCIDevice to
respond with how many ports it has.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170623220926.11479-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We have nearly all the stuff, but this one is missing. Add it in.
Am going to use this new helper for MigrationParameters fields, since
most of them are int64_t.
CC: Markus Armbruster <armbru@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: Marc-André Lureau <marcandre.lureau@redhat.com>
CC: Peter Xu <peterx@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1500349150-13240-2-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Vt6Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-07-17
# gpg: Signature made Mon 17 Jul 2017 19:46:14 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
qmp: Include parent type on 'qom-list-types' output
qmp: Include 'abstract' field on 'qom-list-types' output
tests: Simplify abstract-interfaces check with a helper
i386: add Skylake-Server cpu model
i386: Update comment about XSAVES on Skylake-Client
i386: expose "TCGTCGTCGTCG" in the 0x40000000 CPUID leaf
fw_cfg: move QOM type defines and fw_cfg types into fw_cfg.h
fw_cfg: move qdev_init_nofail() from fw_cfg_init1() to callers
fw_cfg: switch fw_cfg_find() to locate the fw_cfg device by type rather than path
qom: Fix ambiguous path detection when ambiguous=NULL
Revert "machine: Convert abstract typename on compat_props to subclass names"
test-qdev-global-props: Test global property ordering
qdev: fix the order compat and global properties are applied
tests: Test case for object_resolve_path*()
device-crash-test: Fix regexp on whitelist
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* new model of the ARM MPS2/MPS2+ FPGA based development board
* clean up DISAS_* exit conditions and fix various regressions
since commits e75449a3468a6b28c7b5 (in particular including
ones which broke OP-TEE guests)
* make Cortex-M3 and M4 correctly default to 8 PMSA regions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gVxi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170717' into staging
target-arm queue:
* new model of the ARM MPS2/MPS2+ FPGA based development board
* clean up DISAS_* exit conditions and fix various regressions
since commits e75449a3468a6b28c7b5 (in particular including
ones which broke OP-TEE guests)
* make Cortex-M3 and M4 correctly default to 8 PMSA regions
# gpg: Signature made Mon 17 Jul 2017 13:43:45 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20170717:
MAINTAINERS: Add entries for MPS2 board
hw/arm/mps2: Add ethernet
hw/arm/mps2: Add SCC
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller
hw/arm/mps2: Add timers
hw/char/cmsdk-apb-timer: Implement CMSDK APB timer device
hw/arm/mps2: Add UARTs
hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UART
hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board models
target/arm: use DISAS_EXIT for eret handling
target/arm: use gen_goto_tb for ISB handling
target/arm/translate: ensure gen_goto_tb sets exit flags
target/arm/translate.h: expand comment on DISAS_EXIT
target/arm/translate: make DISAS_UPDATE match declared semantics
include/exec/exec-all: document common exit conditions
target/arm: Make Cortex-M3 and M4 default to 8 PMSA regions
qdev: support properties which don't set a default value
qdev-properties.h: Explicitly set the default value for arraylen properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently when running KVM, we expose "KVMKVMKVM\0\0\0" in
the 0x40000000 CPUID leaf. Other hypervisors (VMWare,
HyperV, Xen, BHyve) all do the same thing, which leaves
TCG as the odd one out.
The CPUID signature is used by software to detect which
virtual environment they are running in and (potentially)
change behaviour in certain ways. For example, systemd
supports a ConditionVirtualization= setting in unit files.
The virt-what command can also report the virt type it is
running on
Currently both these apps have to resort to custom hacks
like looking for 'fw-cfg' entry in the /proc/device-tree
file to identify TCG.
This change thus proposes a signature "TCGTCGTCGTCG" to be
reported when running under TCG.
To hide this, the -cpu option tcg-cpuid=off can be used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170509132736.10071-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
By exposing FWCfgIoState and FWCfgMemState internals we allow the possibility
for the internal MemoryRegion fields to be mapped by name for boards that wish
to wire up the fw_cfg device themselves.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <1500025208-14827-4-git-send-email-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implement a model of the Serial Communication Controller (SCC) found
in MPS2 FPGA images.
The primary purpose of this device is to communicate with the
Motherboard Configuration Controller (MCC) which is located on
the MPS board itself, outside the FPGA image. This is used
for programming the MPS clock generators. The SCC also has
some basic ID registers and an output for the board LEDs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
Implement a model of the simple timer device found in the CMSDK.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-5-git-send-email-peter.maydell@linaro.org
Implement a model of the simple "APB UART" provided in
the Cortex-M System Design Kit (CMSDK).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In some situations it's useful to have a qdev property which doesn't
automatically set its default value when qdev_property_add_static is
called (for instance when the default value is not constant).
Support this by adding a flag to the Property struct indicating
whether to set the default value. This replaces the existing test
for whether the PropertyInfo set_default_value function pointer is
NULL, and we set the .set_default field to true for all those cases
of struct Property which use a PropertyInfo with a non-NULL
set_default_value, so behaviour remains the same as before.
This gives us the semantics of:
* if .set_default is true, then .info->set_default_value must
be not NULL, and .defval is used as the the default value of
the property
* otherwise, the property system does not set any default, and
the field will retain whatever initial value it was given by
the device's .instance_init method
We define two new macros DEFINE_PROP_SIGNED_NODEFAULT and
DEFINE_PROP_UNSIGNED_NODEFAULT, to cover the most plausible use cases
of wanting to set an integer property with no default value.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1499788408-10096-3-git-send-email-peter.maydell@linaro.org
In DEFINE_PROP_ARRAY, because we use a PropertyInfo (qdev_prop_arraylen)
which has a .set_default_value member we will set the field to a default
value. That default value will be zero, by the C rule that struct
initialization sets unmentioned members to zero if at least one member
is initialized. However it's clearer to state it explicitly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1499788408-10096-2-git-send-email-peter.maydell@linaro.org
This pull requests supersedes the one from 2017-07-14. That one had a
couple of subtle regressions: there was a build error for mingw32, and
an instance_size which was theoretically wrong everywhere, but only
actually bit on the Travis OSX build.
There are two major batches in this set, rather than the usual
collection of assorted fixes.
* More DRC cleanup. This gets the state management into a state
which should fix many of the hotplug+migration problems we've
had. Plus it gets the migration stream format into something
well defined and pretty minimal which we can reasonably support
into the future.
* Hashed Page Table resizing. It's been a while since this was
posted, but it's been through several previous rounds of review.
The kernel parts (both guest and host) are merged in 4.11, so
this is the only remaining piece left to allow resizing of the
HPT in a running guest.
There are also a handful of unrelated fixes.
-----BEGIN PGP SIGNATURE-----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=O6NQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170717' into staging
ppc patch queue 2017-07-17
This pull requests supersedes the one from 2017-07-14. That one had a
couple of subtle regressions: there was a build error for mingw32, and
an instance_size which was theoretically wrong everywhere, but only
actually bit on the Travis OSX build.
There are two major batches in this set, rather than the usual
collection of assorted fixes.
* More DRC cleanup. This gets the state management into a state
which should fix many of the hotplug+migration problems we've
had. Plus it gets the migration stream format into something
well defined and pretty minimal which we can reasonably support
into the future.
* Hashed Page Table resizing. It's been a while since this was
posted, but it's been through several previous rounds of review.
The kernel parts (both guest and host) are merged in 4.11, so
this is the only remaining piece left to allow resizing of the
HPT in a running guest.
There are also a handful of unrelated fixes.
# gpg: Signature made Mon 17 Jul 2017 07:36:52 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170717: (21 commits)
target/ppc: fix CPU hotplug when radix is enabled (TCG)
spapr: fix memory leak in spapr_core_pre_plug()
pseries: Allow HPT resizing with KVM
pseries: Use smaller default hash page tables when guest can resize
pseries: Enable HPT resizing for 2.10
pseries: Implement HPT resizing
pseries: Stubs for HPT resizing
ppc/pnv: Remove unused XICSState reference
spapr: fix potential memory leak in spapr_core_plug()
spapr: Implement DR-indicator for physical DRCs only
spapr: Remove sPAPRConfigureConnectorState sub-structure
spapr: Consolidate DRC state variables
spapr: Cleanups relating to DRC awaiting_release field
spapr: Refactor spapr_drc_detach()
spapr: Abort on delete failure in spapr_drc_release()
spapr: Simplify unplug path
spapr: Remove 'awaiting_allocation' DRC flag
spapr: Treat devices added before inbound migration as coldplugged
spapr: Minor cleanups to events handling
spapr: migrate pending_events of spapr state
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We've now implemented a PAPR extension allowing PAPR guest to resize
their hash page table (HPT) during runtime.
This patch makes use of that facility to allocate smaller HPTs by default.
Specifically when a guest is aware of the HPT resize facility, qemu sizes
the HPT to the initial memory size, rather than the maximum memory size on
the assumption that the guest will resize its HPT if necessary for hot
plugged memory.
When the initial memory size is much smaller than the maximum memory size
(a common configuration with e.g. oVirt / RHEV) then this can save
significant memory on the HPT.
If the guest does *not* advertise HPT resize awareness when it makes the
ibm,client-architecture-support call, qemu resizes the HPT for maxmimum
memory size (unless it's been configured not to allow such guests at all).
For now we make that reallocation assuming the guest has not yet used the
HPT at all. That's true in practice, but not, strictly, an architectural
or PAPR requirement. If we need to in future we can fix this by having
the client-architecture-support call reboot the guest with the revised
HPT size (the client-architecture-support call is explicitly permitted to
trigger a reboot in this way).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
This patch implements hypercalls allowing a PAPR guest to resize its own
hash page table. This will eventually allow for more flexible memory
hotplug.
The implementation is partially asynchronous, handled in a special thread
running the hpt_prepare_thread() function. The state of a pending resize
is stored in SPAPR_MACHINE->pending_hpt.
The H_RESIZE_HPT_PREPARE hypercall will kick off creation of a new HPT, or,
if one is already in progress, monitor it for completion. If there is an
existing HPT resize in progress that doesn't match the size specified in
the call, it will cancel it, replacing it with a new one matching the
given size.
The H_RESIZE_HPT_COMMIT completes transition to a resized HPT, and can only
be called successfully once H_RESIZE_HPT_PREPARE has successfully
completed initialization of a new HPT. The guest must ensure that there
are no concurrent accesses to the existing HPT while this is called (this
effectively means stop_machine() for Linux guests).
For now H_RESIZE_HPT_COMMIT goes through the whole old HPT, rehashing each
HPTE into the new HPT. This can have quite high latency, but it seems to
be of the order of typical migration downtime latencies for HPTs of size
up to ~2GiB (which would be used in a 256GiB guest).
In future we probably want to move more of the rehashing to the "prepare"
phase, by having H_ENTER and other hcalls update both current and
pending HPTs. That's a project for another day, but should be possible
without any changes to the guest interface.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This introduces stub implementations of the H_RESIZE_HPT_PREPARE and
H_RESIZE_HPT_COMMIT hypercalls which we hope to add in a PAPR
extension to allow run time resizing of a guest's hash page table. It
also adds a new machine property for controlling whether this new
facility is available.
For now we only allow resizing with TCG, allowing it with KVM will require
kernel changes as well.
Finally, it adds a new string to the hypertas property in the device
tree, advertising to the guest the availability of the HPT resizing
hypercalls. This is a tentative suggested value, and would need to be
standardized by PAPR before being merged.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
e6f7e110ee "ppc/xics: remove the XICSState classes" got rid of
XICSState, this is just an leftover.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to PAPR, the DR-indicator should only be valid for physical DRCs,
not logical DRCs. At the moment we implement it for all DRCs, so restrict
it to physical ones only.
We move the state to the physical DRC subclass, which means adding some
QOM boilerplate to handle the newly distinct type.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Most of the time, the state of a DRC object is contained in the single
'state' variable. However, during the transition from UNISOLATE to
CONFIGURED state requires multiple calls to the ibm,configure-connector
RTAS call to retrieve the device tree for the attached device. We need
some extra state to keep track of where we're up to in delivering the
device tree information to the guest.
Currently that extra state is in a sPAPRConfigureConnectorState
substructure which is only allocated when we're in the middle of the
configure connector process. That sounds like a good idea, but the extra
state is only two integers - on many platforms that will take up the same
room as the (maybe NULL) ccs pointer even before malloc() overhead. Plus
it's another object whose lifetime we need to manage. In short, it's not
worth it.
So, fold the sPAPRConfigureConnectorState substructure directly into the
DRC object.
Previously the structure was allocated lazily when the configure-connector
call discovers it's not there. Now, we need to initialize the subfields
pre-emptively, as soon as we enter UNISOLATE state.
Although it's not strictly necessary (the field values should only ever
be consulted when in UNISOLATE state), we try to keep them at -1 when in
other states, as a debugging aid.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Each DRC has three fields describing its state: isolation_state,
allocation_state and configured. At first this seems like a reasonable
representation, since its based directly on the PAPR defined
isolation-state and allocation-state indicators. However:
* Only a few combinations of the two fields' values are permitted
* allocation_state isn't used at all for physical DRCs
* The indicators are write only so they don't really have a well
defined current value independent of each other
This replaces these variables with a single state variable, whose names
and numbers are based on the diagram in LoPAPR section 13.4. Along with
this we add code to check the current state on various operations and make
sure the requested transition is permitted.
Strictly speaking, this makes guest visible changes to behaviour (since we
probably allowed some transitions we shouldn't have before). However, a
hypothetical guest broken by that wasn't PAPR compliant, and probably
wouldn't have worked under PowerVM.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
'awaiting_release' indicates that the host has requested an unplug of the
device attached to the DRC, but the guest has not (yet) put the device
into a state where it is safe to complete removal.
1. Rename it to 'unplug_requested' which to me at least is clearer
2. Remove the ->release_pending() method used to check this from outside
spapr_drc.c. The method only plausibly has one implementation, so use
a plain function (spapr_drc_unplug_requested()) instead.
3. Remove it from the migration stream. Attempting to migrate mid-unplug
is broken not just for spapr - in general management has no good way to
determine if the device should be present on the destination or not. So,
until that's fixed, there's no point adding extra things to the stream.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
This function has two unused parameters - remove them.
It also sets awaiting_release on all paths, except one. On that path
setting it is harmless, since it will be immediately cleared by
spapr_drc_release(). So factor it out of the if statements.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The awaiting_allocation flag in the DRC was introduced by aab9913
"spapr_drc: Prevent detach racing against attach for CPU DR", allegedly to
prevent a guest crash on racing attach and detach. Except.. information
from the BZ actually suggests a qemu crash, not a guest crash. And there
shouldn't be a problem here anyway: if the guest has already moved the DRC
away from UNUSABLE state, the detach would already be deferred, and if it
hadn't it should be safe to detach it (the guest should fail gracefully
when it attempts to change the allocation state).
I think this was probably just a bandaid for some other problem in the
state management. So, remove awaiting_allocation and associated code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
When migrating a guest which has already had devices hotplugged,
libvirt typically starts the destination qemu with -incoming defer,
adds those hotplugged devices with qmp, then initiates the incoming
migration.
This causes problems for the management of spapr DRC state. Because
the device is treated as hotplugged, it goes into a DRC state for a
device immediately after it's plugged, but before the guest has
acknowledged its presence. However, chances are the guest on the
source machine *has* acknowledged the device's presence and configured
it.
If the source has fully configured the device, then DRC state won't be
sent in the migration stream: for maximum migration compatibility with
earlier versions we don't migrate DRCs in coldplug-equivalent state.
That means that the DRC effectively changes state over the migrate,
causing problems later on.
In addition, logging hotplug events for these devices isn't what we
want because a) those events should already have been issued on the
source host and b) the event queue should get wiped out by the
incoming state anyway.
In short, what we really want is to treat devices added before an
incoming migration as if they were coldplugged.
To do this, we first add a spapr_drc_hotplugged() helper which
determines if the device is hotplugged in the sense relevant for DRC
state management. We only send hotplug events when this is true.
Second, when we add a device which isn't hotplugged in this sense, we
force a reset of the DRC state - this ensures the DRC is in a
coldplug-equivalent state (there isn't usually a system reset between
these device adds and the incoming migration).
This is based on an earlier patch by Laurent Vivier, cleaned up and
extended.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The rtas_error_log structure is marked packed, which strongly suggests its
precise layout is important to match an external interface. Along with
that one could expect it to have a fixed endianness to match the same
interface. That used to be the case - matching the layout of PAPR RTAS
event format and requiring BE fields.
Now, however, it's only used embedded within sPAPREventLogEntry with the
fields in native order, since they're processed internally.
Clear that up by removing the nested structure in sPAPREventLogEntry.
struct rtas_error_log is moved back to spapr_events.c where it is used as
a temporary to help convert the fields in sPAPREventLogEntry to the correct
in memory format when delivering an event to the guest.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In racing situations between hotplug events and migration operation,
a rtas hotplug event could have not yet be delivered to the source
guest when migration is started. In this case the pending_events of
spapr state need be transmitted to the target so that the hotplug
event can be finished on the target.
To achieve the minimal VMSD possible to migrate the pending_events list,
this patch makes the changes in spapr_events.c:
- 'log_type' of sPAPREventLogEntry struct deleted. This information can be
derived by inspecting the rtas_error_log summary field. A new function
called 'spapr_event_log_entry_type' was added to retrieve the type of
a given sPAPREventLogEntry.
- sPAPREventLogEntry, epow_log_full and hp_log_full were redesigned. The
only data we're going to migrate in the VMSD is the event log data itself,
which can be divided in two parts: a rtas_error_log header and an extended
event log field. The rtas_error_log header contains information about the
size of the extended log field, which can be used inside VMSD as the size
parameter of the VBUFFER_ALOC field that will store it. To allow this use,
the header.extended_length field must be exposed inline to the VMSD instead
of embedded into a 'data' field that holds everything. With this in mind,
the following changes were done:
* a new 'header' field was added to sPAPREventLogEntry. This field holds a
a struct rtas_error_log inline.
* the declaration of the 'rtas_error_log' struct was moved to spapr.h
to be visible to the VMSD macros.
* 'data' field of sPAPREventLogEntry was renamed to 'extended_log' and
now holds only the contents of the extended event log.
* 'struct rtas_error_log hdr' were taken away from both epow_log_full
and hp_log_full. This information is now available at the header field of
sPAPREventLogEntry.
* epow_log_full and hp_log_full were renamed to epow_extended_log and
hp_extended_log respectively. This rename makes it clearer to understand
the new purpose of both structures: hold the information of an extended
event log field.
* spapr_powerdown_req and spapr_hotplug_req_event now creates a
sPAPREventLogEntry structure that contains the full rtas log entry.
* rtas_event_log_queue and rtas_event_log_dequeue now receives a
sPAPREventLogEntry pointer as a parameter instead of a void pointer.
- the endianess of the sPAPREventLogEntry header is now native instead
of be32. We can use the fields in native endianess internally and write
them in be32 in the guest physical memory inside 'check_exception'. This
allows the VMSD inside spapr.c to read the correct size of the
entended_log field.
- inside spapr.c, pending_events is put in a subsection in the spapr state
VMSD to make sure migration across different versions is not broken.
A small change in rtas_event_log_queue and rtas_event_log_dequeue were also
made: instead of calling qdev_get_machine(), both functions now receive
a pointer to the sPAPRMachineState. This pointer is already available in
the callers of these functions and we don't need to waste resources
calling qdev() again.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add new utility functions which both initialize a RAM
MemoryRegion and arrange for its contents to be migrated;
we give thes the memory_region_init_ram(), memory_region_init_rom()
and memory_region_init_rom_device() names that we just freed up
by renaming the old implementations to _nomigrate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-6-git-send-email-peter.maydell@linaro.org
Add a documentation comment for memory_region_allocate_system_memory().
In particular, the reason for this function's existence and the
requirement on board code to call it exactly once are non-obvious.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1499438577-7674-2-git-send-email-peter.maydell@linaro.org
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=2bOV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170714: (40 commits)
s390x/gdb: add gs registers
s390x/arch_dump: also dump guarded storage control block
s390x/kvm: enable guarded storage
s390x/kvm: Enable KSS facility for nested virtualization
s390x/cpumodel: add esop/esop2 to z12 model
s390x/cpumodel: we are always in zarchitecture mode
s390x/cpumodel: wire up new hardware features
s390x/flic: migrate ais states
s390x/cpumodel: add zpci, aen and ais facilities
s390x: initialize cpu firstly
pc-bios/s390: rebuild s390-ccw.img
pc-bios/s390: add s390-netboot.img
pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
pc-bios/s390-ccw: Add virtio-net driver code
pc-bios/s390-ccw: Add core files for the network bootloading program
roms/SLOF: Update submodule to latest status
pc-bios/s390-ccw: Add code for virtio feature negotiation
pc-bios/s390-ccw: Remove unused structs from virtio.h
pc-bios/s390-ccw: Move byteswap functions to a separate header
pc-bios/s390-ccw: Add a write() function for stdio
...
Conflicts:
target/s390x/kvm.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce guarded storage support for KVM guests on s390.
We need to enable the capability, extend machine check validity,
sigp store-additional-status-at-address, and migration.
The feature is fenced for older machine type versions.
Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some new guest features have been introduced recently. Let's wire
them up in the CPU model.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split patch]
During migration we should transfer ais states to the target guest.
This patch introduces a subsection to kvm_s390_flic_vmstate and new
vmsd for qemu_flic. The ais states need to be migrated only when
ais is supported.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Instead of passing around a pointer to ORB let us simplify some
function signatures by using the previously introduced ORB saved at the
subchannel (SubchDev).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-7-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Turn on migration for the channel subsystem for the next machine. For
legacy machines we still have to do things the old way.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <20170711145441.33925-6-pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
David Hildenbrand
Cornelia Huck
Dong Jia Shi
Thomas Huth
James Hogan
Peter Xu
Peter Maydell
Igor Druzhinin
John Snow
Daniel P. Berrange
Mark Cave-Ayland
David Gibson
Alexey Kardashevskiy
Laurent Vivier
Daniel Henrique Barboza
Fan Zhang
Jason J. Herne
Yi Min Zhao
Halil Pasic