Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide an identity fallback for target that do not
use tagged addresses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We must always use GUEST_ADDR_MAX, because even 32-bit hosts can
use -R <reserved_va> to restrict the memory address of the guest.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the only use of guest_addr_valid that does not begin
with a guest address, but a host address being transformed to
a guest address.
We will shortly adjust guest_addr_valid to handle guest memory
tags, and the host address should not be subjected to that.
Move h2g_valid adjacent to the other h2g macros.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These constants are only ever used with access_ok, and friends.
Rather than translating them to PAGE_* bits, let them equal
the PAGE_* bits to begin.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These constants are only ever used with access_ok, and friends.
Rather than translating them to PAGE_* bits, let them equal
the PAGE_* bits to begin.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Verify that addr + size - 1 does not wrap around.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Return bool not int; pass abi_ulong not 'unsigned long'.
All callers use abi_ulong already, so the change in type
has no effect.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is more descriptive than 'unsigned long'.
No functional change, since these match on all linux+bsd hosts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is more descriptive than 'unsigned long'.
No functional change, since these match on all linux+bsd hosts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Record whether the backing page is anonymous, or if it has file
backing. This will allow us to get close to the Linux AArch64
ABI for MTE, which allows tag memory only on ram-backed VMAs.
The real ABI allows tag memory on files, when those files are
on ram-backed filesystems, such as tmpfs. We will not be able
to implement that in QEMU linux-user.
Thankfully, anonymous memory for malloc arenas is the primary
consumer of this feature, so this restricted version should
still be of use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This data can be allocated by page_alloc_target_data() and
released by page_set_flags(start, end, prot | PAGE_RESET).
This data will be used to hold tag memory for AArch64 MTE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit e2bbc4eaa7 we changed the QAPI modules to name the built-in
module "./builtin" rather than None, but forgot to update the Sphinx
plugin. The effect of this was that when the plugin generated a dependency
file it was including a bogus dependency on a non-existent file named
"builtin", which meant that ninja would run Sphinx and rebuild all
the documentation every time even if nothing had changed.
Update the plugin to use the new name of the builtin module.
Fixes: e2bbc4eaa7
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20210212161311.28915-1-peter.maydell@linaro.org
Before this patch, monitor_qmp_dispatcher_co() used to check whether
shutdown is requested only when it would have to wait for new requests.
If there were still some queued requests, it would try to execute all of
them before shutting down.
This can be surprising when the queued QMP commands take long or hang
because Ctrl-C may not actually exit QEMU as soon as possible.
Change monitor_qmp_dispatcher_co() so that it additionally checks
whether shutdown is request before it gets a new request from the queue.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210212172028.288825-3-kwolf@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 357bda95 already tried to fix the order in monitor_cleanup() by
moving shutdown of the dispatcher coroutine further to the start.
However, it didn't go far enough:
iothread_stop() makes sure that all pending work (bottom halves) in the
AioContext of the monitor iothread is completed. iothread_destroy()
depends on this and fails an assertion if there is still a pending BH.
While the dispatcher coroutine is running, it will try to resume the
monitor after taking a request out of the queue, which involves a BH.
The dispatcher is run until it terminates in the AIO_WAIT_WHILE() loop.
However, adding new BHs between iothread_stop() and iothread_destroy()
is forbidden.
Fix this by stopping the dispatcher first before shutting down the other
parts of the monitor. This means we can now receive requests that aren't
handled any more when QEMU is shutting down, but this is unlikely to be
a problem for QMP clients.
Fixes: 357bda9590
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210212172028.288825-2-kwolf@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the qcow initialization fails, we should remove the file if it was
already created, to avoid leaving stale files around.
We already do this for luks raw images.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201217170904.946013-4-mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function wraps bdrv_co_delete_file for the common case of removing a file,
which was just created by format driver, on an error condition.
It hides the -ENOTSUPP error, and reports all other errors otherwise.
Use it in luks driver
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201217170904.946013-3-mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the underlying block device doesn't support the
bdrv_co_delete_file interface, an 'Error' object was leaked.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201217170904.946013-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests in the "auto" group should support qcow2 so that they can
be run during "make check-block". Test 259 only supports "raw", so
it currently always gets skipped when running "make check-block".
Let's skip this unnecessary step and remove it from the auto group.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210215103835.1129145-1-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Linux blkfront expects both "discard-granularity" and
"discard-alignment" present on xenbus in order to properly enable the
feature, not exposing "discard-alignment" left some Linux blkfront
versions with a broken discard setup. This has also been addressed in
Linux with:
https://lore.kernel.org/lkml/20210118151528.81668-1-roger.pau@citrix.com/T/#u
Fix QEMU to report a "discard-alignment" of 0, in order for it to work
with older Linux frontends.
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Message-Id: <20210118153330.82324-1-roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
cmd_fis is mapped as DMA_DIRECTION_FROM_DEVICE, however, it is read
from, and not written to anywhere. Fix the DMA_DIRECTION and mark
cmd_fis as read-only in the code.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210119164051.89268-1-alxndr@bu.edu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, if guest has workloads, IO thread will acquire aio_context
lock before do io_submit, it leads to segmentfault when do block commit
after snapshot. Just like below:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f7c7d91f700 (LWP 99907)]
0x00005576d0f65aab in bdrv_mirror_top_pwritev at ../block/mirror.c:1437
1437 ../block/mirror.c: No such file or directory.
(gdb) p s->job
$17 = (MirrorBlockJob *) 0x0
(gdb) p s->stop
$18 = false
Call trace of IO thread:
0 0x00005576d0f65aab in bdrv_mirror_top_pwritev at ../block/mirror.c:1437
1 0x00005576d0f7f3ab in bdrv_driver_pwritev at ../block/io.c:1174
2 0x00005576d0f8139d in bdrv_aligned_pwritev at ../block/io.c:1988
3 0x00005576d0f81b65 in bdrv_co_pwritev_part at ../block/io.c:2156
4 0x00005576d0f8e6b7 in blk_do_pwritev_part at ../block/block-backend.c:1260
5 0x00005576d0f8e84d in blk_aio_write_entry at ../block/block-backend.c:1476
...
Switch to qemu main thread:
0 0x00007f903be704ed in __lll_lock_wait at
/lib/../lib64/libpthread.so.0
1 0x00007f903be6bde6 in _L_lock_941 at /lib/../lib64/libpthread.so.0
2 0x00007f903be6bcdf in pthread_mutex_lock at
/lib/../lib64/libpthread.so.0
3 0x0000564b21456889 in qemu_mutex_lock_impl at
../util/qemu-thread-posix.c:79
4 0x0000564b213af8a5 in block_job_add_bdrv at ../blockjob.c:224
5 0x0000564b213b00ad in block_job_create at ../blockjob.c:440
6 0x0000564b21357c0a in mirror_start_job at ../block/mirror.c:1622
7 0x0000564b2135a9af in commit_active_start at ../block/mirror.c:1867
8 0x0000564b2133d132 in qmp_block_commit at ../blockdev.c:2768
9 0x0000564b2141fef3 in qmp_marshal_block_commit at
qapi/qapi-commands-block-core.c:346
10 0x0000564b214503c9 in do_qmp_dispatch_bh at
../qapi/qmp-dispatch.c:110
11 0x0000564b21451996 in aio_bh_poll at ../util/async.c:164
12 0x0000564b2146018e in aio_dispatch at ../util/aio-posix.c:381
13 0x0000564b2145187e in aio_ctx_dispatch at ../util/async.c:306
14 0x00007f9040239049 in g_main_context_dispatch at
/lib/../lib64/libglib-2.0.so.0
15 0x0000564b21447368 in main_loop_wait at ../util/main-loop.c:232
16 0x0000564b21447368 in main_loop_wait at ../util/main-loop.c:255
17 0x0000564b21447368 in main_loop_wait at ../util/main-loop.c:531
18 0x0000564b212304e1 in qemu_main_loop at ../softmmu/runstate.c:721
19 0x0000564b20f7975e in main at ../softmmu/main.c:50
In IO thread when do bdrv_mirror_top_pwritev, the job is NULL, and stop field
is false, this means the MirrorBDSOpaque "s" object has not been initialized
yet, and this object is initialized by block_job_create(), but the initialize
process is stuck in acquiring the lock.
In this situation, IO thread come to bdrv_mirror_top_pwritev(),which means that
mirror-top node is already inserted into block graph, but its bs->opaque->job
is not initialized.
The root cause is that qemu main thread do release/acquire when hold the lock,
at the same time, IO thread get the lock after release stage, and the crash
occured.
Actually, in this situation, job->job.aio_context will not equal to
qemu_get_aio_context(), and will be the same as bs->aio_context,
thus, no need to release the lock, becasue bdrv_root_attach_child()
will not change the context.
This patch fix this issue.
Fixes: 132ada80 "block: Adjust AioContexts when attaching nodes"
Signed-off-by: Michael Qiu <qiudayu@huayun.com>
Message-Id: <20210203024059.52683-1-08005325@163.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To disallow certain refcount_bits values, some _unsupported_imgopts
invocations look like "refcount_bits=1[^0-9]", i.e. they match an
integer boundary with [^0-9]. This expression does not match the end of
the string, though, so it breaks down when refcount_bits is the last
option (which it tends to be after the rewrite of the check script in
Python).
Those invocations could use \b or \> instead, but those are not
portable. They could use something like \([^0-9]\|$\), but that would
be cumbersome. To make it simple and keep the existing invocations
working, just let _unsupported_imgopts match the regex against $IMGOPTS
plus a trailing space.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210210095128.22732-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As we don't have a fully QAPIfied version of object-add yet and it still
has 'gen': false in the schema, it needs to be registered explicitly in
init_qmp_commands() to be available for users.
Fixes: 2af282ec51
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210204072137.19663-1-kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recognise the R5900, which reports itself as MIPS III, as a 64-bit CPU
supporting the n32 ABI.
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <5bea109f0c140da6a821aa7f9705d4b3717e86dc.1541701393.git.noring@nocrew.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The 'Quick Start' section of the userspace emulator documentation is
very old and outdated. In particular:
- it suggests running x86-on-x86 emulation, which is the least
interesting possible use case
- it recommends that users download tarballs of guest binaries
from the QEMU web page which we no longer provide there
There's nothing salvageable here; delete it all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201122000131.18487-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- more migration of Travis to GitLab
- drop Travis container
- remove last of shippable
- clean up gdbstub MAINTAINERS
- remove gdb_get_floatN() helpers
- don't be quiet about skipping gdb tests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmAqQcwACgkQ+9DbCVqe
KkTbEQf5AUeAvmgzY135tjgD+w3/OKRKbHsSoiCE0ngyjxAoZFh6EWO28msH/17f
QnhwR0G1sKLePXrD3e4mmnO8Unt3PmoONmaBACxJaFyC4w+KhiYUaoS63a/5CEFz
BCCEvl0Fevq4zLi3kwZJ+W7hUagkfTZr+8hQq4FJfzPD+3X0Vd1JuiuySonbHIN3
MLloOdUo8jH8XCt+wgMYvdrrXaMYApOGsExcEVqIviYfwtVucKwuIKNS9aa90ZfR
YpC0JHX06pUWo6wfVimS/HpmGL7qj32I8Eip9N7MXdNjwbAxMoz+IyZ1aTTs3MPg
04SMpy++y9G/w6dbW1DkXUH04se6Bw==
=c+2x
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-gdbstub-150221-1' into staging
testing and gdbstub updates:
- more migration of Travis to GitLab
- drop Travis container
- remove last of shippable
- clean up gdbstub MAINTAINERS
- remove gdb_get_floatN() helpers
- don't be quiet about skipping gdb tests
# gpg: Signature made Mon 15 Feb 2021 09:41:32 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-gdbstub-150221-1:
tests/tcg: fix silent skipping of softmmu gdb tests
bswap.h: Remove unused float-access functions
gdbstub: Remove unused gdb_get_float32() and gdb_get_float64()
target/ppc: Drop use of gdb_get_float64() and ldfq_p()
target/m68k: Drop use of gdb_get_float64() and ldfq_p()
target/sh4: Drop use of gdb_get_float32() and ldfl_p()
MAINTAINERS: Add gdbstub.h to the "GDB stub" section
tests/docker: remove travis container
travis-ci: Disable C++ optional objects on AArch64 container
.shippable: remove the last bits
travis.yml: Move the -fsanitize=thread testing to the gitlab-CI
travis.yml: (Re-)move the --enable-debug jobs
travis.yml: Move the --enable-modules test to the gitlab-CI
travis.yml: Move the -fsanitize=undefined test to the gitlab-CI
travis.yml: Move gprof/gcov test across to gitlab
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The float-access functions stfl_*, stfq*, ldfl* and ldfq* are now
unused; remove them. (Accesses to float64 and float32 types can be
made with the ldl/stl/ldq/stq functions, as float64 and float32 are
guaranteed to be typedefs for normal integer types.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210208113428.7181-6-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-15-alex.bennee@linaro.org>
The functions gdb_get_float32() and gdb_get_float64() are now unused;
remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210208113428.7181-5-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-14-alex.bennee@linaro.org>
We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them. We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.
This means that there's no need for a special gdb_get_float64()
function to write a float64 value to the GDB protocol buffer; we can
just use gdb_get_reg64().
Similarly, for reading a value out of the GDB buffer into a float64
we can use ldq_p() and need not use ldfq_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210208113428.7181-4-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-13-alex.bennee@linaro.org>
We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them. We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.
This means that there's no need for a special gdb_get_float64()
function to write a float64 value to the GDB protocol buffer; we can
just use gdb_get_reg64().
Similarly, for reading a value out of the GDB buffer into a float64
we can use ldq_p() and need not use ldfq_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210208113428.7181-3-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-12-alex.bennee@linaro.org>
We used to make a distinction between 'float64'/'float32' types and
the 'uint64_t'/'uint32_t' types, requiring special conversion
operations to go between them. We've now dropped this distinction as
unnecessary, and the 'float*' types remain primarily for
documentation purposes when used in places like the function
prototypes of TCG helper functions.
This means that there's no need for a special gdb_get_float32()
function to write a float32 value to the GDB protocol buffer; we can
just use gdb_get_reg32().
Similarly, for reading a value out of the GDB buffer into a float32
we can use ldl_p() and need not use ldfl_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210208113428.7181-2-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-11-alex.bennee@linaro.org>
The F: patterns in the "GDB stub" section forgot gdbstub.h; add it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210208113729.25170-1-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-10-alex.bennee@linaro.org>
The travis container that we have no longer matches what travis
currently uses. As all x86 jobs are being moved to GitLab CI too,
there is no compelling reason to update the travis container. It
is simpler to just remove it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210209135011.1224992-2-berrange@redhat.com>
Message-Id: <20210211122750.22645-9-alex.bennee@linaro.org>
Travis-CI seems to have enforced memory limit on containers,
and the 'GCC check-tcg' job started to fail on AArch64 [*]:
[2041/3679] Compiling C++ object libcommon.fa.p/disas_nanomips.cpp.o
FAILED: libcommon.fa.p/disas_nanomips.cpp.o
{standard input}: Assembler messages:
{standard input}:577781: Warning: end of file not at end of a line; newline inserted
{standard input}:577882: Error: unknown pseudo-op: `.lvl35769'
{standard input}: Error: open CFI at the end of file; missing .cfi_endproc directive
c++: fatal error: Killed signal terminated program cc1plus
compilation terminated.
Until we have a replacement for this job on Gitlab-CI, disable
compilation of C++ files by forcing the c++ compiler to /bin/false
so Meson build system can not detect it:
$ ../configure --cxx=/bin/false
Compilation
C compiler: cc
Host C compiler: cc
C++ compiler: NO
[*] https://travis-ci.org/github/qemu/qemu/jobs/757819402#L3754
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210207121239.2288530-1-f4bug@amsat.org>
Message-Id: <20210211122750.22645-8-alex.bennee@linaro.org>
Shippable is about to sunset in May 2021 [1] and we had already moved
a chunk of the crossbuilds to GitLab. We already cross build
mips-softmmu targets since:
6bcb5fc0f7 ("gitlab-ci: Add cross-compiling build tests")
and x86 is very well covered.
[1]: https://blog.shippable.com/the-next-step-in-the-evolution-of-shippable-jfrog-pipelines
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210211122750.22645-7-alex.bennee@linaro.org>
Use clang-10, so we can also use the --enable-tsan configure
option instead of only passing the flag via --extra-cflags.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211045455.456371-6-thuth@redhat.com>
Message-Id: <20210211122750.22645-6-alex.bennee@linaro.org>
We already have similar jobs in the gitlab-CI ("build-some-softmmu" and
"build-user-plugins"), so let's switch one of them to use --enable-debug
instead of --enable-debug-tcg, then we can simply drop these jobs from
the Travis-CI.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210211045455.456371-5-thuth@redhat.com>
Message-Id: <20210211122750.22645-5-alex.bennee@linaro.org>
Simply add the flag to an existing job, no need for yet another
job here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211045455.456371-4-thuth@redhat.com>
Message-Id: <20210211122750.22645-4-alex.bennee@linaro.org>
Add it to the existing Clang job and also add a job that covers the
linux-user code with this compiler flag. To make sure that the detected
problems are not simply ignored, let's also use "-fno-sanitize-recover=..."
now instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210211045455.456371-3-thuth@redhat.com>
Message-Id: <20210211122750.22645-3-alex.bennee@linaro.org>
Similarly to commit 8cdb2cef3f, move the gprof/gcov test to GitLab.
The coverage-summary.sh script is not Travis-CI specific, make it
generic.
[thuth: Add gcovr and bsdmainutils which are required for the
coverage-summary.sh script to the ubuntu docker file,
and use 'check' as test target]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201108204535.2319870-10-philmd@redhat.com>
Message-Id: <20210211045455.456371-2-thuth@redhat.com>
Message-Id: <20210211122750.22645-2-alex.bennee@linaro.org>
These were defined for other platforms but mistakenly left out of mips
and generic, so this commit adds them to the places missing. Then it
makes them be translated in getsockopt.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210204153925.2030606-1-Jason@zx2c4.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The sizeof(struct ifreq) is 40 for 64 bit and 32 for 32 bit architectures.
This structure contains a union of other structures, of which struct ifmap
is the biggest for 64 bit architectures. Calling ioclt(…, SIOCGIFCONF, …)
fills a struct sockaddr of that union, and do_ioctl_ifconf() only considered
that struct sockaddr for the size of the union, which has the same size as
struct ifmap on 32 bit architectures. So do_ioctl_ifconf() assumed a wrong
size of 32 for struct ifreq instead of the correct size of 40 on 64 bit
architectures.
The fix makes do_ioctl_ifconf() handle struct ifmap as the biggest part of
the union, treating struct ifreq with the correct size.
Signed-off-by: Stefan <stefan-guix@vodafonemail.de>
Message-Id: <60AA0765-53DD-43D1-A3D2-75F1778526F6@vodafonemail.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If mremap() is called without the MREMAP_MAYMOVE flag with a start address
just before the end of memory (reserved_va) where new_size would exceed
it (and GUEST_ADDR_MAX), the assert(end - 1 <= GUEST_ADDR_MAX) in
page_set_flags() would trigger.
Add an extra guard to the guest_range_valid() checks to prevent this and
avoid asserting binaries when reserved_va is set.
This meant a bug I was seeing locally now gives the same behaviour
regardless of whether reserved_va is set or not.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <70c46e7b999bafbb01d54bfafd44b420d0b782e9.camel@linuxfoundation.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some ELF binaries encode the .bss section as an extension of the data
ones by setting the segment p_memsz > p_filesz. Some other binaries take
a different route and encode it as a stand-alone PT_LOAD segment with
p_filesz = 0 and p_memsz > 0.
Both the encodings are actually correct per ELF specification but the
ELF loader had some troubles in handling the former: with the old logic
it was very likely to get Qemu to crash in zero_bss when trying to
access unmapped memory.
zero_bss isn't meant to allocate whole zero-filled segments but to
"complete" a previously mapped segment with the needed zero bits.
The fix is pretty simple, if the segment is completely zero-filled we
simply allocate one or more pages (according to p_memsz) and avoid
calling zero_bss altogether.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <c9106487-dc4d-120a-bd48-665b3c617287@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On the hppa target userspace binaries may call signalfd4() and
eventfd2() with an old TARGET_O_NONBLOCK value of 000200004 instead of
000200000 for the "mask" syscall parameter, in which case the current
emulation doesn't handle the translation to the native O_NONBLOCK value
correctly.
The 0x04 bit is not masked out before the new O_NONBLOCK bit is set and
as such when calling the native syscall errors out with EINVAL.
Fix this by introducing TARGET_O_NONBLOCK_MASK which is used to mask off
all possible bits. This define defaults to TARGET_O_NONBLOCK when not
defined otherwise, so for all other targets the implementation will
behave as before.
This patch needs to be applied on top of my previous two patches.
Bug was found and patch was verified by using qemu-hppa as debian buildd
server on x86_64.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210210061214.GA221322@ls3530.fritz.box>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
