This patch moves VADDCUW and VSUBCUW to decodtree with gvec using an
implementation based on the helper, with the main difference being
changing the -1 (aka all bits set to 1) result returned by cmp when
true to +1. It also implemented a .fni4 version of those instructions
and dropped the helper.
vaddcuw:
rept loop master patch
8 12500 0,01008200 0,00612400 (-39.3%)
25 4000 0,01091500 0,00471600 (-56.8%)
100 1000 0,01332500 0,00593700 (-55.4%)
500 200 0,01998500 0,01275700 (-36.2%)
2500 40 0,04704300 0,04364300 (-7.2%)
8000 12 0,10748200 0,11241000 (+4.6%)
vsubcuw:
rept loop master patch
8 12500 0,01226200 0,00571600 (-53.4%)
25 4000 0,01493500 0,00462100 (-69.1%)
100 1000 0,01522700 0,00455100 (-70.1%)
500 200 0,02384600 0,01133500 (-52.5%)
2500 40 0,04935200 0,03178100 (-35.6%)
8000 12 0,09039900 0,09440600 (+4.4%)
Overall there was a gain in performance, but the TCGop code was still
slightly bigger in the new version (it went from 4 to 5).
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-4-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch moves VMLADDUHM to decodetree a creates a gvec implementation
using mul_vec and add_vec.
rept loop master patch
8 12500 0,01810500 0,00903100 (-50.1%)
25 4000 0,01739400 0,00747700 (-57.0%)
100 1000 0,01843600 0,00901400 (-51.1%)
500 200 0,02574600 0,01971000 (-23.4%)
2500 40 0,05921600 0,07121800 (+20.3%)
8000 12 0,15326700 0,21725200 (+41.7%)
The significant difference in performance when REPT is low and LOOP is
high I think is due to the fact that the new implementation has a higher
translation time, as when using a helper only 5 TCGop are used but with
the patch a total of 10 TCGop are needed (Power lacks a direct mul_vec
equivalent so this instruction is implemented with the help of 5 others,
vmuleu, vmulou, vmrgh, vmrgl and vpkum).
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The macro is missing a '{' after the if condition. Any use of REQUIRE_HV
would cause a compilation error.
Fixes: fc34e81acd ("target/ppc: add macros to check privilege level")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221006200654.725390-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This instruction was added by Power ISA 3.0, using PPC2_PRCNTL makes it
available for older processors, like de e5500 and e6500.
Fixes: 7af1e7b022 ("target/ppc: add support for hypervisor doorbells on book3s CPUs")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221006200654.725390-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
On Power ISA v2.07, the category for these instructions became
"Embedded.Processor Control" or "Book S".
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20221006200654.725390-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We had only been reporting the stage2 page size. This causes
problems if stage1 is using a larger page size (16k, 2M, etc),
but stage2 is using a smaller page size, because cputlb does
not set large_page_{addr,mask} properly.
Fix by using the max of the two page sizes.
Reported-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the atomic update for hardware management of the dirty bit.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the atomic update for hardware management of the access flag.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-13-richard.henderson@linaro.org
[PMM: Fix accidental PROT_WRITE to PAGE_WRITE; add missing
main-loop.h include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace some gotos with some nested if statements.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both GP and DBM are in the upper attribute block.
Extend the computation of attrs to include them,
then simplify the setting of guarded.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leave the upper and lower attributes in the place they originate
from in the descriptor. Shifting them around is confusing, since
one cannot read the bit numbers out of the manual. Also, new
attributes have been added which would alter the shifts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221024051851.3074715-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always overriding fi->type was incorrect, as we would not properly
propagate the fault type from S1_ptw_translate, or arm_ldq_ptw.
Simplify things by providing a new label for a translation fault.
For other faults, store into fi directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The unconditional loop was used both to iterate over levels
and to control parsing of attributes. Use an explicit goto
in both cases.
While this appears less clean for iterating over levels, we
will need to jump back into the middle of this loop for
atomic updates, which is even uglier.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fault type is to be used with FEAT_HAFDBS when
the guest enables hw updates, but places the tables
in memory where atomic updates are unsupported.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Separate S1 translation from the actual lookup.
Will enable lpae hardware updates.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MMFR1 field may indicate support for hardware update of
access flag alone, or access flag and dirty bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hoist the computation of the mmu_idx for the ptw up to
get_phys_addr_with_struct and get_phys_addr_twostage.
This removes the duplicate check for stage2 disabled
from the middle of the walk, performing it only once.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reduce the amount of typing required for this check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An exception targeting EL2 from lower EL is actually maskable when
HCR_E2H and HCR_TGE are both set. This applies to both secure and
non-secure Security state.
We can remove the conditions that try to suppress masking of
interrupts when we are Secure and the exception targets EL2 and
Secure EL2 is disabled. This is OK because in that situation
arm_phys_excp_target_el() will never return 2 as the target EL. The
'not if secure' check in this function was originally written before
arm_hcr_el2_eff(), and back then the target EL returned by
arm_phys_excp_target_el() could be 2 even if we were in Secure
EL0/EL1; but it is no longer needed.
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Message-id: 20221017092432.546881-1-ake@igel.co.jp
[PMM: Add commit message paragraph explaining why it's OK to
remove the checks on secure and SCR_EEL2]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_E0PD adds new bits E0PD0 and E0PD1 to TCR_EL1, which allow the
OS to forbid EL0 access to half of the address space. Since this is
an EL0-specific variation on the existing TCR_ELx.{EPD0,EPD1}, we can
implement it entirely in aa64_va_parameters().
This requires moving the existing regime_is_user() to internals.h
so that the code in helper.c can get at it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221021160131.3531787-1-peter.maydell@linaro.org
The element size is encoded in the M3 field, not in the M4
field.
Fixes: be6324c6b7 ("s390x/tcg: Implement VECTOR ISOLATE STRING")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1248
Message-Id: <20221012182755.1014853-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Sometimes dumping a guest from the outside is the only way to get the
data that is needed. This can be the case if a dumping mechanism like
KDUMP hasn't been configured or data needs to be fetched at a specific
point. Dumping a protected guest from the outside without help from
fw/hw doesn't yield sufficient data to be useful. Hence we now
introduce PV dump support.
The PV dump support works by integrating the firmware into the dump
process. New Ultravisor calls are used to initiate the dump process,
dump cpu data, dump memory state and lastly complete the dump process.
The UV calls are exposed by KVM via the new KVM_PV_DUMP command and
its subcommands. The guest's data is fully encrypted and can only be
decrypted by the entity that owns the customer communication key for
the dumped guest. Also dumping needs to be allowed via a flag in the
SE header.
On the QEMU side of things we store the PV dump data in the newly
introduced architecture ELF sections (storage state and completion
data) and the cpu notes (for cpu dump data).
Users can use the zgetdump tool to convert the encrypted QEMU dump to an
unencrypted one.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Message-Id: <20221017083822.43118-11-frankja@linux.ibm.com>
Since the only user, Arm MTE, always requires allocation,
merge the get and alloc functions to always produce a
non-null result. Also assume that the user has already
checked page validity.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a constant target data allocation size for all pages.
This will be necessary to reduce overhead of page tracking.
Since TARGET_PAGE_DATA_SIZE is now required, we can use this
to omit data tracking for targets that don't require it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These memory allocation functions return void *, and casting to
another pointer type is useless clutter. Drop these casts.
If you really want another pointer type, consider g_new().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220923120025.448759-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only issue with FMA instructions is that there are _a lot_ of them (30
opcodes, each of which comes in up to 4 versions depending on VEX.W and
VEX.L; a total of 96 possibilities). However, they can be implement with
only 6 helpers, two for scalar operations and four for packed operations.
(Scalar versions do not do any merging; they only affect the bottom 32
or 64 bits of the output operand. Therefore, there is no separate XMM
and YMM of the scalar helpers).
First, we can reduce the number of helpers to one third by passing four
operands (one output and three inputs); the reordering of which operands
go to the multiply and which go to the add is done in emit.c.
Second, the different instructions also dispatch to the same softfloat
function, so the flags for float32_muladd and float64_muladd are passed
in the helper as int arguments, with a little extra complication to
handle FMADDSUB and FMSUBADD.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
F16C only consists of two instructions, which are a bit peculiar
nevertheless.
First, they access only the low half of an YMM or XMM register for the
packed-half operand; the exact size still depends on the VEX.L flag.
This is similar to the existing avx_movx flag, but not exactly because
avx_movx is hardcoded to affect operand 2. To this end I added a "ph"
format name; it's possible to reuse this approach for the VPMOVSX and
VPMOVZX instructions, though that would also require adding two more
formats for the low-quarter and low-eighth of an operand.
Second, VCVTPS2PH is somewhat weird because it *stores* the result of
the instruction into memory rather than loading it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VROUND, FSTCW and STMXCSR all have to perform the same conversion from
x86 rounding modes to softfloat constants. Since the ISA is consistent
on the meaning of the two-bit rounding modes, extract the common code
into a wrapper for set_float_rounding_mode.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the destination is a memory register, op->n is -1. Going through
tcg_gen_gvec_dup_imm path is both useless (the value has been stored
by the gen_* function already) and wrong because of the out-of-bounds
access.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-10-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Since we always pass dc->pc_curr, fold the arithmetic to zero displacement.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on
absolute values by passing in pc difference.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In preparation for TARGET_TB_PCREL, reduce reliance on absolute values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A simple helper to retrieve the length of the current insn.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221020030641.2066807-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The return type of the functions is already bool, but in a few
instances we used an integer type with the return statement.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So far, limit the change to S1_ptw_translate, arm_ldl_ptw, and
arm_ldq_ptw. Use probe_access_full to find the host address,
and if so use a host load. If the probe fails, we've got our
fault info already. On the off chance that page tables are not
in RAM, continue to use the address_space_ld* functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hoist this test out of arm_ld[lq]_ptw into S1_ptw_translate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before using softmmu page tables for the ptw, plumb down
a debug parameter so that we can query page table entries
from gdbstub without modifying cpu state.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Consolidate most of the inputs and outputs of S1_ptw_translate
into a single structure. Plumb this through arm_ld*_ptw from
the controlling get_phys_addr_* routine.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221011031911.2408754-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Compare only the VMID field when considering whether we need to flush.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221011031911.2408754-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We had been marking this ARM_MMU_IDX_NOTLB, move it to a real tlb.
Flush the tlb when invalidating stage 1+2 translations. Re-use
alle1_tlbmask() for other instances of EL1&0 + Stage2.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221011031911.2408754-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not yet used, but add mmu indexes for 1-1 mapping
to physical addresses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a field to TARGET_PAGE_ENTRY_EXTRA to hold the guarded bit.
In is_guarded_page, use probe_access_full instead of just guessing
that the tlb entry is still present. Also handles the FIXME about
executing from device memory.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPUTLBEntryFull structure now stores the original pte attributes, as
well as the physical address. Therefore, we no longer need a separate
bit in MemTxAttrs, nor do we need to walk the tree of memory regions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Copy attrs and shareability, into the TLB. This will eventually
be used by S1_ptw_translate to report stage1 translation failures,
and by do_ats_write to fill in PAR_EL1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221011031911.2408754-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU doesn't model micro-architectural details which includes most
chip errata. The ARM_ERRATA_798181 work around in the Linux
kernel (see erratum_a15_798181_init) currently detects QEMU's
cortex-a15 as broken and triggers additional expensive TLB flushes as
a result.
Change the MIDR to report what the latest silicon would (r4p0). We
explicitly set the IMPDEF revidr bits to 0 because we don't need to
set anything other than the silicon revision to indicate these flushes
are not needed. This cuts about 5s from my Debian kernel boot with the
latest 6.0rc1 kernel (29s->24s).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Message-id: 20221010153225.506394-1-alex.bennee@linaro.org
Cc: Arnd Bergmann <arnd@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Message-Id: <20220906172257.2776521-1-alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This queue contains improvements in the e500 and ppc4xx boards, changes
in the maintainership of the project, a new QMP/HMP command and bug
fixes:
- Cedric is stepping back from qemu-ppc maintainership;
- ppc4xx_sdram: QOMification and clean ups;
- e500: add new types of flash and clean ups;
- QMP/HMP: introduce dumpdtb command;
- spapr_pci, booke doorbell interrupt and xvcmp* bit fixes;
The 'dumpdtb' implementation is also making changes to RISC-V files that
were acked by Alistair Francis and are being included in this queue.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY02qEgAKCRA82cqW3gMx
ZIadAQCYY9f+NFrSJBm3z4JjUaP+GmbgEjibjZW05diyKwbqzQEAjE1KXFCcd40D
3Brs2Dm4YruaJCwb68vswVQAYteXaQ8=
=hl94
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20221017' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-10-18:
This queue contains improvements in the e500 and ppc4xx boards, changes
in the maintainership of the project, a new QMP/HMP command and bug
fixes:
- Cedric is stepping back from qemu-ppc maintainership;
- ppc4xx_sdram: QOMification and clean ups;
- e500: add new types of flash and clean ups;
- QMP/HMP: introduce dumpdtb command;
- spapr_pci, booke doorbell interrupt and xvcmp* bit fixes;
The 'dumpdtb' implementation is also making changes to RISC-V files that
were acked by Alistair Francis and are being included in this queue.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCY02qEgAKCRA82cqW3gMx
# ZIadAQCYY9f+NFrSJBm3z4JjUaP+GmbgEjibjZW05diyKwbqzQEAjE1KXFCcd40D
# 3Brs2Dm4YruaJCwb68vswVQAYteXaQ8=
# =hl94
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 17 Oct 2022 15:16:34 EDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20221017' of https://gitlab.com/danielhb/qemu: (38 commits)
hw/riscv: set machine->fdt in spike_board_init()
hw/riscv: set machine->fdt in sifive_u_machine_init()
hw/ppc: set machine->fdt in spapr machine
hw/ppc: set machine->fdt in pnv_reset()
hw/ppc: set machine->fdt in pegasos2_machine_reset()
hw/ppc: set machine->fdt in xilinx_load_device_tree()
hw/ppc: set machine->fdt in sam460ex_load_device_tree()
hw/ppc: set machine->fdt in bamboo_load_device_tree()
hw/nios2: set machine->fdt in nios2_load_dtb()
qmp/hmp, device_tree.c: introduce dumpdtb
hw/ppc/spapr_pci.c: Use device_cold_reset() rather than device_legacy_reset()
target/ppc: Fix xvcmp* clearing FI bit
hw/ppc/e500: Remove if statement which is now always true
hw/ppc/mpc8544ds: Add platform bus
hw/ppc/mpc8544ds: Rename wrongly named method
hw/ppc/e500: Reduce usage of sysbus API
docs/system/ppc/ppce500: Add heading for networking chapter
hw/gpio/meson: Introduce dedicated config switch for hw/gpio/mpc8xxx
hw/ppc/meson: Allow e500 boards to be enabled separately
ppc440_uc.c: Remove unneeded parenthesis
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With all SSE (and AVX!) instructions now implemented in disas_insn_new,
it's possible to remove gen_sse, as well as the helpers for instructions
that now use gvec.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds another kind of weirdness when you thought you had seen it all:
an opcode byte that comes _after_ the address, not before. It's not
worth adding a new X86_SPECIAL_* constant for it, but it's actually
not unlike VCMP; so, forgive me for exploiting the similarity and just
deciding to dispatch to the right gen_helper_* call in a single code
generation function.
In fact, the old decoder had a bug where s->rip_offset should have
been set to 1 for 3DNow! instructions, and it's fixed now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include AVX, AVX2 and VAES in the guest cpuid features supported by TCG.
Signed-off-by: Paul Brook <paul@nowt.org>
Message-Id: <20220424220204.2493824-40-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are exactly the same as the non-VEX version, but one has to be careful
that only VEX.L=0 is allowed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here the code is a bit uglier due to the truncation and extension
of registers to and from 32-bit. There is also a mistake in the
manual with respect to the size of the memory operand of CVTPS2PI
and CVTTPS2PI, reported by Ricky Zhou.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are mostly moves, and yet are a total pain. The main issue
is that:
1) some instructions are selected by mod==11 (register operand)
vs. mod=00/01/10 (memory operand)
2) stores to memory are two-operand operations, while the 3-register
and load-from-memory versions operate on the entire contents of the
destination; this makes it easier to separate the gen_* function for
the store case
3) it's inefficient to load into xmm_T0 only to move the value out
again, so the gen_* function for the load case is separated too
The manual also has various mistakes in the operands here, for example
the store case of MOVHPS operates on a 128-bit source (albeit discarding
the bottom 64 bits) and therefore should be Mq,Vdq rather than Mq,Vq.
Likewise for the destination and source of MOVHLPS.
VUNPCK?PS and VUNPCK?PD are the same as VUNPCK?DQ and VUNPCK?QDQ,
but encoded as prefixes rather than separate operands. The helpers
can be reused however.
For MOVSLDUP, MOVSHDUP and MOVDDUP I chose to reimplement them as
helpers. I named the helper for MOVDDUP "movdldup" in preparation
for possible future introduction of MOVDHDUP and to clarify the
similarity with MOVSLDUP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing special going on here, for once.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are several special cases here:
1) extending moves have different widths for the helpers vs. for the
memory loads, and the width for memory loads depends on VEX.L too.
This is represented by X86_SPECIAL_AVXExtMov.
2) some instructions, such as variable-width shifts, select the vector element
size via REX.W.
3) VSIB instructions (VGATHERxPy, VPGATHERxy) are also part of this group,
and they have (among other things) two output operands.
3) the macros for 4-operand blends (which are under 0x0f 0x3a) have to be
extended to support 2-operand blends. The 2-operand variant actually
came a few years earlier, but it is clearer to implement them in the
opposite order.
X86_TYPE_WM, introduced earlier for unaligned loads, is reused for helpers
that accept a Reg* but have a M argument.
These three-byte opcodes also include AVX new instructions, for which
the helpers were originally implemented by Paul Brook <paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As pmovmskb is used by strlen et al, this is the third
highest overhead sse operation at %0.8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[Reorganize to generate code for any vector size. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The more complicated operations here are insertions and extractions.
Otherwise, there are just more entries than usual because the PS/PD/SS/SD
variations are encoded in the opcode rater than in the prefixes.
These three-byte opcodes also include AVX new instructions, whose
implementation in the helpers was originally done by Paul Brook
<paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Three-byte opcodes from the 0F3Ah area all have an immediate byte which
is usually unsigned. Clarify in the helper code that it is unsigned;
the new decoder treats immediates as signed by default, and seeing
an intN_t in the prototype might give the wrong impression that one
can use decode->immediate directly.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The more complicated ones here are d6-d7, e6-e7, f7. The others
are trivial.
For LDDQU, using gen_load_sse directly might corrupt the register if
the second part of the load fails. Therefore, add a custom X86_TYPE_WM
value; like X86_TYPE_W it does call gen_load(), but it also rejects a
value of 11 in the ModRM field like X86_TYPE_M.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes shifts by immediate, which use bits 3-5 of the ModRM byte
as an opcode extension. With the exception of 128-bit shifts, they are
implemented using gvec.
This also covers VZEROALL and VZEROUPPER, which use the same opcode
as EMMS. If we were wanting to optimize out gen_clear_ymmh then this
would be one of the starting points. The implementation of the VZEROALL
and VZEROUPPER helpers is by Paul Brook.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are a mixed batch, including the first two horizontal
(66 and F2 only) operations, more moves, and SSE4a extract/insert.
Because SSE4a is pretty rare, I chose to leave the helper as they are,
but it is possible to unify them by loading index and length from the
source XMM register and generating deposit or extract TCG ops.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are mostly floating-point SSE operations. The odd ones out
are MOVMSK and CVTxx2yy, the others are straightforward.
Unary operations are a bit special in AVX because they have 2 operands
for PD/PS operands (VEX.vvvv must be 1111b), and 3 operands for SD/SS.
They are handled using X86_OP_GROUP3 for compactness.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are more simple integer instructions present in both MMX and SSE/AVX,
with no holes that were later occupied by newer instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are both MMX and SSE/AVX instructions, except for vmovdqu. In both
cases the inputs and output is in s->ptr{0,1,2}, so the only difference
between MMX, SSE, and AVX is which helper to call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new implementation of SSE will cover AVX from the get go, because
all the work for the helper functions is already done. We just need to
build them.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new implementation of SSE will cover AVX from the get go, so include
the 24 extra comparison operators that are only available with the VEX
prefix.
Based on a patch by Paul Brook <paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compared to Paul's implementation, the new decoder will use a different approach
to implement AVX's merging of dst with src1 on scalar operations. Adjust the
old SSE decoder to be compatible with new-style helpers.
The affected instructions are CVTSx2Sx, ROUNDSx, RSQRTSx, SQRTSx, RCPSx.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compared to Paul's implementation, the new decoder will use a different approach
to implement AVX's merging of dst with src1 on scalar operations. Adjust the
helpers to provide this functionality.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add to the helpers all the operands that are needed to implement AVX.
Extracted from a patch by Paul Brook <paul@nowt.org>.
Message-Id: <20220424220204.2493824-26-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adjust all #ifdefs to match the ones in ops_sse.h.
Signed-off-by: Paul Brook <paul@nowt.org>
Message-Id: <20220424220204.2493824-23-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because these are the only VEX instructions that QEMU supports, the
new decoder is entered on the first byte of a valid VEX prefix, and VEX
decoding only needs to be done in decode-new.c.inc.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many SSE and AVX instructions are only valid with specific prefixes
(none, 66, F3, F2). Introduce a direct way to encode this in the
decoding table to avoid using decode groups too much.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new hflag bit to determine whether AVX instructions are allowed
Signed-off-by: Paul Brook <paul@nowt.org>
Message-Id: <20220424220204.2493824-4-paul@nowt.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG will shortly implement VAES instructions, so add the relevant feature
word to the DisasContext.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add generic code generation that takes care of preparing operands
around calls to decode.e.gen in a table-driven manner, so that ALU
operations need not take care of that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new decoder is based on three principles:
- use mostly table-driven decoding, using tables derived as much as possible
from the Intel manual. Centralizing the decode the operands makes it
more homogeneous, for example all immediates are signed. All modrm
handling is in one function, and can be shared between SSE and ALU
instructions (including XMM<->GPR instructions). The SSE/AVX decoder
will also not have duplicated code between the 0F, 0F38 and 0F3A tables.
- keep the code as "non-branchy" as possible. Generally, the code for
the new decoder is more verbose, but the control flow is simpler.
Conditionals are not nested and have small bodies. All instruction
groups are resolved even before operands are decoded, and code
generation is separated as much as possible within small functions
that only handle one instruction each.
- keep address generation and (for ALU operands) memory loads and writeback
as much in common code as possible. All ALU operations for example
are implemented as T0=f(T0,T1). For non-ALU instructions,
read-modify-write memory operations are rare, but registers do not
have TCGv equivalents: therefore, the common logic sets up pointer
temporaries with the operands, while load and writeback are handled
by gvec or by helpers.
These principles make future code review and extensibility simpler, at
the cost of having a relatively large amount of code in the form of this
patch. Even EVEX should not be _too_ hard to implement (it's just a crazy
large amount of possibilities).
This patch introduces the main decoder flow, and integrates the old
decoder with the new one. The old decoder takes care of parsing
prefixes and then optionally drops to the new one. The changes to the
old decoder are minimal and allow it to be replaced incrementally with
the new one.
There is a debugging mechanism through a "LIMIT" environment variable.
In user-mode emulation, the variable is the number of instructions
decoded by the new decoder before permanently switching to the old one.
In system emulation, the variable is the highest opcode that is decoded
by the new decoder (this is less friendly, but it's the best that can
be done without requiring deterministic execution).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
REX.W can be used even in 32-bit mode by AVX instructions, where it is retroactively
renamed to VEX.W. Make the field available even in 32-bit mode but keep the REX_W()
macro as it was; this way, that the handling of dflag does not use it by mistake and
the AVX code more clearly points at the special VEX behavior of the bit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ldq takes a pointer to the first byte to load the 64-bit word in;
ldo takes a pointer to the first byte of the ZMMReg. Make them
consistent, which will be useful in the new SSE decoder's
load/writeback routines.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used for emission and endian adjustments of gvec operations.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220822223722.1697758-2-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than recurse directly on mmu_translate, go through the
same softmmu lookup that we did for the page table walk.
This centralizes all knowledge of MMU_NESTED_IDX, with respect
to setup of TranslationParams, to get_physical_address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-10-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use probe_access_full in order to resolve to a host address,
which then lets us use a host cmpxchg to update the pte.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/279
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-9-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need one variable set per translation level,
which requires copying into pte/pte_addr for huge pages.
Standardize on pte/pte_addr for all levels.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-8-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use MMU_NESTED_IDX for each memory access, rather than
just a single translation to physical. Adjust svm_save_seg
and svm_load_seg to pass in mmu_idx.
This removes the last use of get_hphys so remove it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-7-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These new mmu indexes will be helpful for improving
paging and code throughout the target.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-6-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace with PTE_HPHYS for the page table walk, and a direct call
to mmu_translate for the final stage2 translation. Hoist the check
for HF2_NPT_MASK out to get_physical_address, which avoids the
recursive call when stage2 is disabled.
We can now return all the way out to x86_cpu_tlb_fill before raising
an exception, which means probe works.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-5-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create TranslateParams for inputs, TranslateResults for successful
outputs, and TranslateFault for error outputs; return true on success.
Move stage1 error paths from handle_mmu_fault to x86_cpu_tlb_fill;
reorg the rest of handle_mmu_fault into get_physical_address.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-4-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a boolean to control the call to get_hphys instead
of passing a null function pointer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-3-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace int is_write1 and magic numbers with the proper
MMUAccessType access_type and enumerators.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221002172956.265735-2-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restore pc_save while undoing any state change that may have
happened while decoding the instruction. Leave a TODO about
removing all of that when the table-based decoder is complete.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221016222303.288551-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The semantic difference between the deprecated device_legacy_reset()
function and the newer device_cold_reset() function is that the new
function resets both the device itself and any qbuses it owns,
whereas the legacy function resets just the device itself and nothing
else.
The x86_cpu_after_reset() function uses device_legacy_reset() to reset
the APIC; this is an APICCommonState and does not have any qbuses, so
for this purpose the two functions behave identically and we can stop
using the deprecated one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221013171926.1447899-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Resetting a guest that has Hyper-V VMBus support enabled triggers a QEMU
assertion failure:
hw/hyperv/hyperv.c:131: synic_reset: Assertion `QLIST_EMPTY(&synic->sint_routes)' failed.
This happens both on normal guest reboot or when using "system_reset" HMP
command.
The failing assertion was introduced by commit 64ddecc88b ("hyperv: SControl is optional to enable SynIc")
to catch dangling SINT routes on SynIC reset.
The root cause of this problem is that the SynIC itself is reset before
devices using SINT routes have chance to clean up these routes.
Since there seems to be no existing mechanism to force reset callbacks (or
methods) to be executed in specific order let's use a similar method that
is already used to reset another interrupt controller (APIC) after devices
have been reset - by invoking the SynIC reset from the machine reset
handler via a new x86_cpu_after_reset() function co-located with
the existing x86_cpu_reset() in target/i386/cpu.c.
Opportunistically move the APIC reset handler there, too.
Fixes: 64ddecc88b ("hyperv: SControl is optional to enable SynIc") # exposed the bug
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <cb57cee2e29b20d06f81dce054cbcea8b5d497e8.1664552976.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vector instructions in general are not supposed to change the FI bit.
However, xvcmp* instructions are calling gen_helper_float_check_status,
which is leading to a cleared FI flag where it should be kept
unchanged.
As helper_float_check_status only affects inexact, overflow and
underflow, and the xvcmp* instructions don't change these flags, this
issue can be fixed by removing the call to helper_float_check_status.
By doing this, the FI bit in FPSCR will be preserved as expected.
Fixes: 00084a25ad ("target/ppc: introduce separate VSX_CMP macro for xvcmp* instructions")
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221005121551.27957-1-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This partially reverts commit 9dc20cc37d ("target/ppc: Simplify
powerpc_excp_booke"), which removed DOORI and DOORCI interrupts.
Without this patch, a -cpu e5500 -smp 2 machine booting Linux
crashes with:
qemu: fatal: Invalid PowerPC exception 36. Aborting
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220924114436.1422786-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220930024510.800005-3-gaosong@loongson.cn>
use gen_bstrins/gen_bstrpic to replace gen_rr_ms_ls.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220930024510.800005-2-gaosong@loongson.cn>
Since commit 4047368938 "accel/tcg: Introduce tlb_set_page_full" we
have been seeing this assert
../accel/tcg/cputlb.c:1294: tlb_set_page_with_attrs: Assertion `is_power_of_2(size)' failed.
When running Tock on the OpenTitan machine.
The issue is that pmp_get_tlb_size() would return a TLB size that wasn't
a power of 2. The size was also smaller then TARGET_PAGE_SIZE.
This patch ensures that any TLB size less then TARGET_PAGE_SIZE is
rounded down to 1 to ensure it's a valid size.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei<zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221012011449.506928-1-alistair.francis@opensource.wdc.com
Message-Id: <20221012011449.506928-1-alistair.francis@opensource.wdc.com>
Add support for saving/restoring extended save states when signals
are delivered. This allows using AVX, MPX or PKRU registers in
signal handlers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MSR_CORE_THREAD_COUNT MSR describes CPU package topology, such as number
of threads and cores for a given package. This is information that QEMU has
readily available and can provide through the new user space MSR deflection
interface.
This patch propagates the existing hvf logic from patch 027ac0cb51
("target/i386/hvf: add rdmsr 35H MSR_CORE_THREAD_COUNT") to KVM.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20221004225643.65036-4-agraf@csgraf.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM has grown support to deflect arbitrary MSRs to user space since
Linux 5.10. For now we don't expect to make a lot of use of this
feature, so let's expose it the easiest way possible: With up to 16
individually maskable MSRs.
This patch adds a kvm_filter_msr() function that other code can call
to install a hook on KVM MSR reads or writes.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20221004225643.65036-3-agraf@csgraf.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel CPUs starting with Haswell-E implement a new MSR called
MSR_CORE_THREAD_COUNT which exposes the number of threads and cores
inside of a package.
This MSR is used by XNU to populate internal data structures and not
implementing it prevents virtual machines with more than 1 vCPU from
booting if the emulated CPU generation is at least Haswell-E.
This patch propagates the existing hvf logic from patch 027ac0cb51
("target/i386/hvf: add rdmsr 35H MSR_CORE_THREAD_COUNT") to TCG.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-Id: <20221004225643.65036-2-agraf@csgraf.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221001140935.465607-27-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand this function at each of its callers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221001140935.465607-26-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a tcg global temp for this, and use it instead of explicit stores.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221001140935.465607-25-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221001140935.465607-24-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions have only one caller, and the logic is more
obvious this way.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221001140935.465607-23-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions are always passed aflag, so we might as well
read it from DisasContext directly. While we're at it, use
a common subroutine for these two functions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221001140935.465607-22-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With gen_jmp_rel, we may chain between two translation blocks
which may only be separated because of TB size limits.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221001140935.465607-21-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
