Currently, when a regular command doesn't have any data to output,
QMP will emit:
{ "return": "OK" }
Returning an empty dict is better though, because dicts can support
some protocol changes in a compatible way.
So, with this commit we will return:
{ "return": {} }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Looks like I dropped this check when addressing the 'query-'
commands request.
QMP should only handle converted commands, obviously.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
My segment sync patch broke compilation on PPC32, because it was trying to
sync the SLB even though ppc32 CPUs don't have an SLB.
So let's only sync it when we're on a PP64 one!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Convert musb fifo to 8bit to allow 8/16/32bit access
MUSB allows reading and writing to the fifo in 32/16/8 bit
width. The Linux kernel does this sometimes, most usually at
the end of writing the packet to allow packet to end at a
odd bytecount.
Convert the fifo to 8bit allows removing lots of shifts
which shows that the fifo is more natural as 8bit.
While at it, add multiple missing register definitions and
and cleanup debug prints.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The limit of iomem areas is quite low. Without the
debug print, it is quite hard to figure out why more
devices are not getting registered.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
At least under some mingw compilers slirp networking fails without declaring
these fields packed.
From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Explicit read/write locking pidfile under WIN32 is bit extreme
nobody get the chance to read the pidfile. Convert to a write-only lock.
Also, creating pidfile was disabled along with daemonize under
WIN32. Enable it, but do not enable daemon support which doesn't
exist under WIN32 atm.
From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
/tmp doesn't exist under win32. Ease the pain of win32 development slightly.
From: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that we load the option roms via fw_cfg, we can stop copying
them to the 0xc000 -> 0xe000. The patch does just that.
Also the rom loader gets simplified as all remaining users of the
rom loader load the bits at a fixed address so the packing and
aligning logic can go away.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
roms: use fw_cfg for vgabios and option rom loading, additionally to
deploying them the traditional way (copy to 0xc0000 -> 0xe0000 range).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a file transfer interface to fw_cfg. Intended to be
used for passing non-pci option roms and vgabios to seabios. Namespace
is modeled after the existing cbfs filesystem support in seabios.
Reading the new FW_CFG_FILE_DIR entry returns a file list.
Fields there are in network byte order (aka bigendian).
aliguori: fix fw_cfg.h for multiboot.bin, add proper fw_cfg.h declarations,
quiet fprintf() in fw_cfg.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a romfile property to the pci bus. It allows to specify
a romfile to load into the rom bar of the pci device. The default value
comes from a new field in PCIDeviceInfo. The property allows to change
the file and also to disable the rom loading using an empty string.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, we preload option roms into the option rom space in memory. This
prevents DDIM from functioning correctly which severely limits the number
of roms we can support.
This patch introduces a pci_add_option_rom() which registers the
PCI_ROM_ADDRESS bar which points to our option rom. It also converts over
the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this
new mechanism.
The result is that PXE boot functions even with three unique types of cards.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
SCSI controllers have no trouble existing without any attached
disks. This could be achieved with the (legacy) monitor syntax
pci_add pci_addr=auto storage if=scsi
This is now denied with
scsi requires a backing file/device.
failed to add if=scsi
There is no need for this denial and it breaks compatability
with existing QEMU usage, so remove the check for presence
of a drive.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Floppy used the io_base address to register savevm region.
This reverts commit 2966b390d0.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to suspend command interpretation and execution
synchronously, e.g. during migration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit ebbc8a3d8e76d0402f8a08c10c0f32e24715d41d.
As suggested by Jan Kiszka,
"It was obsoleted by d1793b836f8f123b961c613de1bb1c0c185c84cc and now
saves/restores a useless field."
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The cursor pixmap size we calculate later ends up being 4096 dwords
long by the looks of it. This boots an F12 LiveCD now.
Signed-off-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch enables dirty log tracking whenever it's needed and disables it
when it is not.
We unconditionally enable dirty log tracking on reset, restart dirty log
tracking when PCI IO regions are remapped, and disable/enable it based on
commands from the guest.
Rebased-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
VMware VGA requires that the depth presented to the guest is the same as the
DisplaySurface that it renders to. This is because it performs a very simple
memcpy() to blit from one surface to another.
We currently hardcode a 24-bit depth. The surface allocator for SDL may, and
usually will, allocate a surface with a different depth causing screen
corruption.
This changes the code to allocate the DisplaySurface before initializing the
device which allows the depth of the DisplaySurface to be used instead of
hardcoding something.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Apparently, VBE maps the VGA vram to a fixed physical location. KVM requires
that all mappings of the VGA vram have dirty tracking enabled on them. Any
access to the VGA vram through the VBE mapping currently fails to result in
dirty page tracking updates causing a black screen.
This is the true root cause of VMware VGA not working correctly under KVM and
likely also an issue with some of the std-vga black screen issues too.
Cirrus does not enable VBE so it would not be a problem when using Cirrus.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rebased-by: Dave Airlie <airlied@redhat.com>
Add a error message in case we fail to parse a qdev property.
Also make qemu not abort() in case setting a global property can't be
set. This used to be a clear programming error. The introduction of
the -global switch changed that though, so better exit instead (after
printing the new error message).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix mismerge between 64465297 and 556cd098.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rebased to master, adapted to device renaming by armbru,
no other changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Check rom_load_all() return value.
Also don't make option rom loading failure fatal.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split default_drive into default_{floppy,cdrom,sdcard}.
Also add QEMUMachine flags to disable them per machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The monitor_vprintf() function now touches the 'mon' pointer
before calling monitor_puts(), this causes block migration
to segfault as its functions call monitor_printf() with a
NULL 'mon'.
To fix the problem this commit moves the 'mon' NULL check
from monitor_puts() to monitor_vprintf().
This can potentially hide bugs, but for some reason this has
been the behavior for a long time.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The monitor_read_command() function is readline specific
and should only be used when readline is available.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
do_balloon() should check for ballooning availability as
do_info_balloon() does.
Noted by Daniel P. Berrange <berrange@redhat.com>.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Monitor's eject command uses 'filename' for the device name
argument, but 'device' is a better name.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Key replacement should not update the dictionary's size.
This commit also adds a test for the bug.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a UNIX migration command is attempt to a UNIX socket which does
not exist, then the monitor is suspended, but never resumed. This
prevents any further use of the monitor
* migration-unix.c: Only call migrate_fd_monitor_suspend() once
connected to the UNIX socket.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The multiboot implementation assumed that there is only one program header
(which contains the entry point) and that the entry point is at the start of
the code. This doesn't hold true generally and caused too little data to be
loaded.
Fix the loading code to pass the whole loaded data to the Multiboot Option ROM.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Part of the first patch of the -drive rerror series has been merged once more
on top of the rest of the series. This effectively disables the rerror option
and always goes with the default value. Reverting the commit re-enables the
option.
This reverts commit fc072ec4df.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The %gs segment that was used was not matching the comments.
I just moved the GDT descriptor on the stack instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
hw_breakpoint_type and hw_breakpoint_len used the wrong index multiplier
to extract type and len.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Marcelo correctly remarked that there are usage conflicts between QEMU
core code and KVM /wrt exception_index. So spend a separate field and
also save/restore it properly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
