Commit Graph

29 Commits

Author SHA1 Message Date
Alistair Francis 8fd06719e7 ssi: Move ssi.h into a separate directory
Move the ssi.h include file into the ssi directory.

While touching the code also fix the typdef lines as
checkpatch complains.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-21 14:15:03 +00:00
Peter Maydell 12b167226f hw/arm: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449505425-32022-4-git-send-email-peter.maydell@linaro.org
2016-01-18 16:33:32 +00:00
Markus Armbruster 007b06578a Use error_fatal to simplify obvious fatal errors
Done with this Coccinelle semantic patch:

    @@
    type T;
    identifier FUN, RET;
    expression list ARGS;
    expression ERR, EC;
    @@
    (
    -    T RET = FUN(ARGS, &ERR);
    +    T RET = FUN(ARGS, &error_fatal);
    |
    -    RET = FUN(ARGS, &ERR);
    +    RET = FUN(ARGS, &error_fatal);
    |
    -    FUN(ARGS, &ERR);
    +    FUN(ARGS, &error_fatal);
    )
    -    if (ERR != NULL) {
    -        error_report_err(ERR);
    -        exit(EC);
    -    }

This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.

It leaves dead Error * variables behind, cleaned up manually.

Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-01-13 11:58:58 +01:00
Guenter Roeck 74fcbd22d2 hw/misc: Add support for ADC controller in Xilinx Zynq 7000
Add support for the Xilinx XADC core used in Zynq 7000.

References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
  Dual 12-Bit 1 MSPS Analog-to-Digital Converter

Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
  * Changed macro names to match TRM where possible
  * Made programmers model macro scheme consistent
  * Dropped XADC_ZYNQ_ prefix on local macros
  * Fix ALM field width
  * Update threshold-comparison interrupts in _update_ints()
  * factored out DFIFO pushes into helper. Renamed to "push/pop"
  * Changed xadc_reg to 10 bits and added OOB check.
  * Reduced scope of MCTL reset to just stop channel coms.
  * Added dummy read data to write commands
  * Changed _ to - seperators in string names and filenames
  * Dropped ------------ in header comment
  * Catchall'ed _update_ints() in _write handler.
  * Minor whitespace changes.
  * Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12 21:30:42 +00:00
Peter Crosthwaite c3a9a689c6 arm: xilinx_zynq: Add linux pre-boot
Add a Linux-specific pre-boot routine that matches the device-
specific bootloaders behaviour. This is needed for modern Linux that
expects the ARM PLL in SLCR to be a more even value (not 26).

Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9a9025ea65572586b50dca4e5819032e3c436d64.1446182614.git.crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03 13:49:41 +00:00
Eduardo Habkost e264d29de2 Use DEFINE_MACHINE() to register all machines
Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine
automatically using a script.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Style cleanups, convert imx25_pdk machine]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-19 16:40:15 +02:00
Markus Armbruster f8ed85ac99 Fix bad error handling after memory_region_init_ram()
Symptom:

    $ qemu-system-x86_64 -m 10000000
    Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456:
    upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory
    Aborted (core dumped)

Root cause: commit ef701d7 screwed up handling of out-of-memory
conditions.  Before the commit, we report the error and exit(1), in
one place, ram_block_add().  The commit lifts the error handling up
the call chain some, to three places.  Fine.  Except it uses
&error_abort in these places, changing the behavior from exit(1) to
abort(), and thus undoing the work of commit 3922825 "exec: Don't
abort when we can't allocate guest memory".

The three places are:

* memory_region_init_ram()

  Commit 4994653 (right after commit ef701d7) lifted the error
  handling further, through memory_region_init_ram(), multiplying the
  incorrect use of &error_abort.  Later on, imitation of existing
  (bad) code may have created more.

* memory_region_init_ram_ptr()

  The &error_abort is still there.

* memory_region_init_rom_device()

  Doesn't need fixing, because commit 33e0eb5 (soon after commit
  ef701d7) lifted the error handling further, and in the process
  changed it from &error_abort to passing it up the call chain.
  Correct, because the callers are realize() methods.

Fix the error handling after memory_region_init_ram() with a
Coccinelle semantic patch:

    @r@
    expression mr, owner, name, size, err;
    position p;
    @@
            memory_region_init_ram(mr, owner, name, size,
    (
    -                              &error_abort
    +                              &error_fatal
    |
                                   err@p
    )
                                  );
    @script:python@
        p << r.p;
    @@
    print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column)

When the last argument is &error_abort, it gets replaced by
&error_fatal.  This is the fix.

If the last argument is anything else, its position is reported.  This
lets us check the fix is complete.  Four positions get reported:

* ram_backend_memory_alloc()

  Error is passed up the call chain, ultimately through
  user_creatable_complete().  As far as I can tell, it's callers all
  handle the error sanely.

* fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize()

  DeviceClass.realize() methods, errors handled sanely further up the
  call chain.

We're good.  Test case again behaves:

    $ qemu-system-x86_64 -m 10000000
    qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory
    [Exit 1 ]

The next commits will repair the rest of commit ef701d7's damage.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-18 14:39:29 +02:00
Dirk Müller c8623c0215 arm: memory: Replace memory_region_init_ram with memory_region_allocate_system_memory
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.

Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.

Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.

Signed-off-by: Dirk Mueller <dmueller@suse.com>
Message-id: CAL5wTH4UHYKpJF=dLJfFzxpufjY189chnCow47-ySuLf8GLbug@mail.gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-08 17:30:36 +01:00
Markus Armbruster 565f65d271 error: Use error_report_err() where appropriate
Coccinelle semantic patch:

    @@
    expression E;
    @@
    -    error_report("%s", error_get_pretty(E));
    -    error_free(E);
    +    error_report_err(E);
    @@
    expression E, S;
    @@
    -    error_report("%s", error_get_pretty(E));
    +    error_report_err(E);
    (
         exit(S);
    |
         abort();
    )

Trivial manual touch-ups in block/sheepdog.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18 10:51:09 +01:00
Greg Bellows 61e2f3521c target-arm: Disable EL3 on unsupported machines
Disables the CPU ARM_FEATURE_EL3 featuere on machine models that can be
configured to use Cortex-A9, Cortex-A15, and ARM1176 but don't officially
support EL3.  This preserves backwards compatibility.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1418684992-8996-15-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22 23:12:28 +00:00
Markus Armbruster 4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
Markus Armbruster fa1d36df74 block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()
The patch is big, but all it really does is replacing

    dinfo->bdrv

by

    blk_bs(blk_by_legacy_dinfo(dinfo))

The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).

Line wrapping muddies the waters a bit.  I also omit tests whether
dinfo->bdrv is null, because it never is.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Hu Tao 49946538d2 memory: add parameter errp to memory_region_init_ram
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09 13:41:43 +02:00
Peter Crosthwaite de77914e50 ssi: Name the CS GPIO
To get it out of the default GPIO list. This allows child devices to
use the un-named GPIO namespace without having to be SSI aware. That
is, there is no more need for machines to know about the obscure
policy where GPIO 0 is the SSI chip-select and GPIO 1..N are the
concrete class GPIOs (defined locally as 0..N-1).

This is most notable in stellaris, which uses a device which has both
SSI and concrete level GPIOs.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28 17:36:21 +02:00
Marcel Apfelbaum 3ef9622182 machine: Conversion of QEMUMachineInitArgs to MachineState
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.

All the other changes are only mechanical refactoring, no semantic changes.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-28 17:35:01 +02:00
Alistair Francis b48adc0d30 ZYNQ: Implement board MIDR control for Zynq
This patch uses the fact that the midr variable is now a property
This patch sets the midr variable to the boards custom midr

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: a3754b10d150af72e4688a993e484fa2b9b8fa21.1390176489.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-31 14:47:33 +00:00
Peter Crosthwaite 7fcd57e80d arm/xilinx_zynq: Always instantiate the GEMs
Don't conditionalise GEM instantiation on networking attachments. The
device should always be present even if not attached to a network.

This allows for probing of the device by expectant guests (such as
OS's).  This is needed because sysbus (or AXI in Xilinx's real hw case)
is not self identifying so the guest has no dynamic way of detecting
device absence.

Also allows for testing of the GEM in loopback mode with -net none.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 55649779a68ee3ff54b24c339b6fdbdccd1f0ed7.1388800598.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08 19:07:21 +00:00
Peter Crosthwaite c25771281e arm/xilinx_zynq: Implement CBAR initialisation
Fix the CBAR initialisation by using the newly defined static property.
Zynq will now correctly init the CBAR to the SCU base address.

Needed to boot Linux on the xilinx_zynq machine model.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 8db7d57ebe5418fed397fcc86ea719f98446c178.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:29 +00:00
Peter Crosthwaite d8bbdcf8d6 arm/xilinx_zynq: Use object_new() rather than cpu_arm_init()
To allow the machine model to set device properties before CPU
realization.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: e57658b4506b26ab6b6fadbe6d7827f669f51895.1387160489.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:28 +00:00
Markus Armbruster c165473269 hw: Clean up bogus default boot order
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.

Machines that care:

* pc and its variants

  Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
  'c', 'd' and 'n'.  Reject all others (fatal with -boot).

* nseries (n800, n810)

  Check whether order starts with 'n'.  Silently ignored otherwise.

* prep, g3beige, mac99

  Extract the first character the machine understands (subset of
  'a'..'f').  Silently ignored otherwise.

* spapr

  Accept an arbitrary string (vl.c restricts it to contain only
  'a'..'p', no duplicates).

* sun4[mdc]

  Use the first character.  Silently ignored otherwise.

Strip characters these machines ignore from their default boot order.

For all other machines, remove the unused default boot order
alltogether.

Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-28 10:16:47 +03:00
Peter Maydell e4a6540ded hw/arm/xilinx_zynq: Don't use arm_pic_init_cpu()
Drop the now-deprecated arm_pic_init_cpu() in favour of directly
getting the IRQ line from the ARMCPU object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375977856-25046-14-git-send-email-peter.maydell@linaro.org
2013-08-20 14:54:30 +01:00
Andreas Färber 182735efaf cpu: Make first_cpu and next_cpu CPUState
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.

gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:32:54 +02:00
Paolo Bonzini 2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Peter Crosthwaite 6b91f0155b xilinx_spips: seperate SPI and QSPI as two classes
Make SPI and QSPI different classes. QSPIPS is setup as a child of SPIPS.
Only QSPI has the LQSPI functionality, so move all that to the child class.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 2cdd0cadb5ba77ca02fde5cae627852dc9a64c71.1369117359.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-03 17:17:41 +01:00
Peter Maydell bd2be15003 arm: fix location of some include files
The recent rearrangement of include files had some minor errors:
 devices.h is not ARM specific and should not be in arm/
 arm.h should be in arm/

Move these two headers to correct this.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 15:16:01 +02:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
Peter Crosthwaite f1922e36e2 xilinx_zynq: Cleanup ssi_create_slave
With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave().

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-05 15:04:10 +02:00
Peter Crosthwaite 7451afb671 xilinx_zynq: added pl330 to machine model
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 5bc295bd2aa50dfe573f428574dbd7d8add7b3f8.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15 16:41:58 +00:00
Paolo Bonzini 530182169e hw: move boards and other isolated files to hw/ARCH
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 15:01:19 +01:00