This is added in anticipation of wanting it for a synchronous wrapper
for the iotest interface. Normally, execute() and execute_msg() both
raise QMP errors in the form of Python exceptions.
Many iotests expect the entire reply as-is. To reduce churn there, add a
private execution interface that will ease transition churn. However, I
do not wish to encourage its use, so it will remain a private interface.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-22-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add execute() and execute_msg().
_execute() is split into _issue() and _reply() halves so that
hypothetical subclasses of QMP that want to support different execution
paradigms can do so.
I anticipate a synchronous interface may have need of separating the
send/reply phases. However, I do not wish to expose that interface here
and want to actively discourage it, so they remain private interfaces.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-21-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add the ability to handle and route messages in qmp_protocol.py. The
interface for actually sending anything still isn't added until next
commit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The star of our show!
Add most of the QMP protocol, sans support for actually executing
commands. No problem, that happens in the next several commits.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This class was designed as a "mix-in" primarily so that the feature
could be given its own treatment in its own python module.
It gets quite a bit too long otherwise.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The QMP spec doesn't define very many objects that are iron-clad in
their format, but there are a few. This module makes it trivial to
validate them without relying on an external third-party library.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-15-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The Message class is here primarily to serve as a solid type to use for
mypy static typing for unambiguous annotation and documentation.
We can also stuff JSON serialization and deserialization into this class
itself so it can be re-used even outside this infrastructure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-14-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is added as a courtesy: many protocols are line-based, including
QMP. Putting it in AsyncProtocol lets us keep the QMP class
implementation just a pinch more abstract.
(And, if we decide to add a QTEST implementation later, it will need
this, too. (Yes, I have a QTEST implementation.))
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add hooks designed to log/filter incoming/outgoing messages. The primary
intent for these is to be able to support iotests which may want to log
messages with specific filters for reproducible output.
Another use is for plugging into Urwid frameworks; all messages in/out
can be automatically added to a rendering list for the purposes of a
qmp-shell like tool.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
QMP can transmit some pretty big messages, and the default limit of 64KB
isn't sufficient. Make sure that we can configure it.
Reported-by: G S Niteesh Babu <niteesh.gs@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's a little messier than connect, because it wasn't designed to accept
*precisely one* connection. Such is life.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Give the connection and the reader/writer tasks nicknames, and add
logging statements throughout.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This serves a few purposes:
1. Protect interfaces when it's not safe to call them (via @require)
2. Add an interface by which an async client can determine if the state
has changed, for the purposes of connection management.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is the bare minimum that you need to establish a full-duplex async
message-based protocol with Python's asyncio.
The features to be added in forthcoming commits are:
- Runstate tracking
- Logging
- Support for incoming connections via accept()
- _cb_outbound, _cb_inbound message hooks
- _readline() method
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Python 3.6 does not have all of the goodies that Python 3.7 does, and we
need to support both. Add some compatibility wrappers needed for this
purpose.
(Note: Python 3.6 is EOL December 2021.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210915162955.333025-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
For now, it's empty! Soon, it won't be.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20210915162955.333025-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A few new annoyances. Of note is the new warning for an unspecified
encoding when opening a text file, which actually does indicate a
potentially real problem; see
https://www.python.org/dev/peps/pep-0597/#motivation
Use LC_CTYPE to determine an encoding to use for interpreting QEMU's
terminal output. Note that Python states: "language code and encoding
may be None if their values cannot be determined" -- use a platform
default as a backup.
Notes: Passing encoding=None will generate a suppressed warning on
Python 3.10+ that 'None' should not be passed as the encoding
argument. This behavior may be deprecated in the future and the default
switched to be a ubiquitous UTF-8. Opting in to the locale default will
be done by passing the encoding 'locale', but that isn't available in
3.6 through 3.9. Presumably this warning will be unsuppressed some time
prior to the actual switch and we can re-investigate these issues at
that time if necessary.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210916182248.721529-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
mypy thinks that return value of these methods in subclusses is
QEMUMachine, which is wrong. So, make typing smarter.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824083856.17408-26-vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We often call qmp() with unpacking dict, like qmp('foo', **{...}).
mypy don't really like it, it thinks that passed unpacked dict is a
positional argument and complains that it type should be bool (because
second argument of qmp() is conv_keys: bool).
Allow passing dict directly, simplifying interface, and giving a way to
satisfy mypy.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20210824083856.17408-25-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
- use shorter construction
- don't create new dict if not needed
- drop extra unpacking key-val arguments
- drop extra default values
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20210824083856.17408-24-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Using the flag -p, allow the qemu binary to print to stdout.
Also create the common function _close_qemu_log_file() to
avoid accessing machine.py private fields directly and have
duplicate code.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210809090114.64834-16-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20210809090114.64834-4-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also add a new _qmp_timer field to the QEMUMachine class.
Let's change the default socket timeout to None, so that if
a subclass needs to add a timer, it can be done by modifying
this private field.
At the same time, restore the timer to be 15 seconds in iotests.py, to
give an upper bound to the QMP monitor test command execution.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210809090114.64834-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This added the args property to QEMUMachine so that users of the class
can access and handle the list of arguments to be given to the QEMU
binary.
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210430133414.39905-6-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Logs can be very important to debug issues, and currently QEMUMachine
instances will remove logs that are created under the temporary
directories.
With this change, the stdout and stderr generated by the QEMU process
started by QEMUMachine will always be kept along the test results
directory.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210211220146.2525771-6-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This patch *doesn't* update all of the docstring standards across the
QEMU package directory to make our docstring usage consistent. It
*doesn't* fix the formatting to make it look pretty or reasonable in
generated output. It *does* fix a few small instances where Sphinx would
emit a build warning because of malformed ReST -- If we built our Python
docs with Sphinx.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-16-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These suppressions only apply to a small handful of places. Instead of
disabling them globally, disable them just in the cases where we
need. The design of the machine class grew quite organically with tons
of constructor and class instance variables -- there's little chance of
meaningfully refactoring it in the near term, so just suppress the
warnings for that class.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
https://www.python.org/dev/peps/pep-0561/#specification
Create 'py.typed' files in each subpackage that indicate to mypy that
this is a typed module, so that users of any of these packages can use
mypy to check their code as well.
Note: Theoretically it's possible to ditch MANIFEST.in in favor of using
package_data in setup.cfg, but I genuinely could not figure out how to
get it to include things from the *source root* into the *package root*;
only how to include things from each subpackage. I tried!
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-id: 20210629214323.1329806-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Pylint updated to 2.9.0 upstream, adding new warnings for things that
re-use the 'err' variable. Luckily, this only breaks the
python-check-tox job, which is allowed to fail as a warning.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210629214323.1329806-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The script will be unavailable for a commit or two, which will help
preserve development history attached to the new file. A forwarder will
be added shortly afterwards.
With qmp_shell in the python qemu.qmp package, now it is fully type
checked, linted, etc. via the Python CI. It will be quite a bit harder
to accidentally break it again in the future.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-41-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
__enter__ can be invoked from a subclass, so it needs a more flexible
type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-31-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is meant to represent any generic object seen in a QMPMessage, not
just the root object itself.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210607200649.1840382-27-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Remove the shebang, and add a package-defined entry point instead. Now,
it can be accessed using 'qemu-ga-client' from the command line after
installing the package.
The next commit adds a forwarder shim that allows the running of this
script without needing to install the package again.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The script itself will be unavailable for a few commits before being
restored, with no way to run it right after this commit. This helps move
git history into the new file. To prevent linter regressions, though, we
do need to immediately touch up the filename to remove dashes (to make
the module importable), and remove the executable bit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's only a Dict[str, Any] most of the time. It's not actually
guaranteed to be anything in particular. Fix this type to be
more accurate to the reality we live in.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210604155532.1499282-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The 'fuse' command will be unavailable if 'fusepy' is not installed. It
will simply not load and subsequently be unavailable as a subcommand.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-20-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Move qom-fuse over to the python package now that it passes the
linter. Update the import paradigms so that it continues to pass in the
context of the Python package.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-18-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Inspired by qom-set, qom-get, qom-tree and qom-list; combine all four of
those scripts into a single script.
A later addition of qom-fuse as an 'extension' necessitates that some
common features are split out and shared between them.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This takes the place of qmp-shell's __get_address function. It also
allows other utilities to share the same parser and syntax for
specifying QMP locations.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20210603003719.1321369-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In porting the qom tools, qmp-shell, etc; it becomes evident that this
type is wrong.
This is an integer, not a string. We didn't catch this before because
none of QEMUMonitorProtocol's *users* happen to be checked, and the
internal logic of this class is otherwise self-consistent. Additionally,
mypy was not introspecting into the socket() interface to realize we
were passing a bad type for AF_INET. Fixed now.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210603003719.1321369-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Update the comment concerning the flake8 exception to match commit
42c0dd12, whose commit message stated:
A note on the flake8 exception: flake8 will warn on *any* bare except,
but pylint's is context-aware and will suppress the warning if you
re-raise the exception.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Delete the empty settings now that it's sharing a home with settings for
other tools.
pylint can now be run from this folder as "pylint qemu".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-17-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add short readmes to python/, python/qemu/, python/qemu/machine,
python/qemu/qmp, and python/qemu/utils that explain the directory
hierarchy. These readmes are visible when browsing the source on
e.g. gitlab/github and are designed to help new developers/users quickly
make sense of the source tree.
They are not designed for inclusion in a published manual.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
move python/qemu/*.py to python/qemu/[machine, qmp, utils]/*.py and
update import directives across the tree.
This is done to create a PEP420 namespace package, in which we may
create subpackages. To do this, the namespace directory ("qemu") should
not have any modules in it. Those files will go into new 'machine',
'qmp' and 'utils' subpackages instead.
Implement machine/__init__.py making the top-level classes and functions
from its various modules available directly inside the package. Change
qmp.py to qmp/__init__.py similarly, such that all of the useful QMP
library classes are available directly from "qemu.qmp" instead of
"qemu.qmp.qmp".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
One more little delinting fix that snuck in.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We handle this resource rather meticulously in
shutdown/kill/wait/__exit__ et al, through the laborious mechanisms in
_do_shutdown().
Quiet this pylint warning here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-7-jsnow@redhat.com
Message-id: 20210517184808.3562549-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Shift the open() call later so that the pylint pragma applies *only* to
that one open() call. Add a note that suggests why this is safe: the
resource is unconditionally cleaned up in _post_shutdown().
_post_shutdown is called after failed launches (see launch()), and
unconditionally after every call to shutdown(), and therefore also on
__exit__.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20210527211715.394144-6-jsnow@redhat.com
Message-id: 20210517184808.3562549-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
