On Xen MSIs can be remapped into pirqs, which are a type of event
channels. It's mostly for the benefit of PCI passthrough devices, to
avoid the overhead of interacting with the emulated lapic.
However remapping interrupts and MSIs is also supported for emulated
devices, such as the e1000 and virtio-net.
When an interrupt or an MSI is remapped into a pirq, masking and
unmasking is done by masking and unmasking the event channel. The
masking bit on the PCI config space or MSI-X table should be ignored,
but it isn't at the moment.
As a consequence emulated devices which use MSI or MSI-X, such as
virtio-net, don't work properly (the guest doesn't receive any
notifications). The mechanism was working properly when xen_apic was
introduced, but I haven't narrowed down which commit in particular is
causing the regression.
Fix the issue by ignoring the masking bit for MSI and MSI-X which have
been remapped into pirqs.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-23-git-send-email-peter.maydell@linaro.org
For GICv3 ITS implementation we are going to use requester IDs in KVM IRQ
routing code. This patch introduces reusable convenient way to obtain this
ID from the device pointer. The new function is now used in some places,
where the same calculation was used.
MemTxAttrs.stream_id also renamed to requester_id in order to better
reflect semantics of the field.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <5814bcb03a297f198e796b13ed9c35059c52f89b.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's being used by the hypervisor. For now simply mimic a device not
capable of masking, and fully emulate any accesses a guest may issue
nevertheless as simple reads/writes without side effects.
This is XSA-129.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
GICv3 ITS distinguishes between devices by using hardwired device IDs passed on the bus.
This patch implements passing these IDs in qemu.
SMMU is also known to use stream IDs, therefore this addition can also be useful for
implementing platforms with SMMU.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Changes from v1:
- Added bus number to the stream ID
- Added stream ID not only to MSI-X, but also to plain MSI. Some common code was made into
msi_send_message() function.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch
# patch -p1 < out.patch
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The spec says (and real HW confirms this) that, if the bus master bit
is 0, the device will not generate any PCI accesses. MSI and MSI-X
messages fall among these, so we should use the corresponding address
space to deliver them. This will prevent delivery if bus master support
is disabled.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Include dependencies from pci core using the correct path.
This is required now that it's in the separate directory.
Need to check whether they can be minimized, for now,
keep the code as is.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefano Stabellini
Peter Maydell
Pavel Fedin
Jan Beulich
Stefan Hajnoczi
Jan Kiszka
Edgar E. Iglesias
Paolo Bonzini
Michael S. Tsirkin