Now we no longer have vcpu controlled trace events we can excise the
code that allows us to query its status.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-9-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-8-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now we no longer have any events that are for vcpus we can start
excising the code from the trace control. As the vcpu parameter is
encoded as part of QMP we just stub out the has_vcpu/vcpu parameters
rather than alter the API.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-8-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-7-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This does involve temporarily stubbing out some helper functions
before we excise the rest of the code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-4-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-4-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While these are all in helper functions being designated vcpu events
complicates the removal of the dynamic vcpu state code. TCG plugins
allow you to instrument vcpu_[init|exit|idle].
We rename cpu_reset and make it a normal trace point.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-3-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-3-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Expose qemu_cpu_list_lock globally so that we can use
WITH_QEMU_LOCK_GUARD and QEMU_LOCK_GUARD to simplify a few code paths
now and in future.
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-2-quic_jiles@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
QMP is not available on user emulation; there is not monitor.
Besides, since commit a0e61807a3 ("qapi: Remove QMP events
and commands from user-mode builds") we don't generate the
qapi-commands-trace.h header in a user-emulation-only build.
Remove the QMP trace commands from qemu-user binaries.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221220150417.26751-1-philmd@linaro.org>
This moves these commands from MAINTAINERS sections "Human
Monitor (HMP)" and "QMP" to "Tracing".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230124121946.1139465-9-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Wrap the bare TranslationBlock pointer into a structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now we have no TCG trace events and no longer handle them in the code
we can remove the handling from the tracetool to generate them. vcpu
tracing is still available although the existing syscall event is an
exercise in redundancy (plugins and -strace can also get the
information).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-21-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-20-alex.bennee@linaro.org>
1. Use --gen-trace when generate qmp commands
2. Add corresponding .trace-events files as outputs in qapi_files
custom target
3. Define global qapi_trace_events list of .trace-events file targets,
to fill in trace/qapi.build and to use in trace/meson.build
4. In trace/meson.build use the new array as an additional source of
.trace_events files to be processed
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-5-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add the suffix directly in trace/simple.c, so that quoting is done
properly by Meson.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no point in encoding load/store within a bit of
the memory trace info operand. Represent atomic operations
as a single read-modify-write tracepoint. Use MemOpIdx
instead of inventing a form specifically for traces.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We (will) often have the complete MemOpIdx handy, so use that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Meson 0.58.2 does not need b_staticpic=$pie anymore, and has
stabilized the keyval module. Remove the workaround and use a few
replacements for features deprecated in the 0.57.0 release cycle.
One feature that we would like to use is passing dependencies to
summary. However, that was broken in 0.59.0 and 0.59.1. Therefore,
use the embedded Meson if the host has anything older than 0.59.2,
but allow --meson= to use 0.58.2.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the last thing that mem.h does is include mem-internal.h,
the symbols are not actually private.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The next version of lttng-libs will not require liburcu at run time anymore.
Therefore, it is expected that distros will not include the urcubp libraries
anymore when installing lttng-ust-devel.
To avoid future problems, just require pkg-config to detect lttng-ust.
The .pc files for lttng-ust correctly include liburcubp.a for static
builds, and have always done since pkg-config files were added in 2011.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210712155710.520889-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add helper function and call it for each trace event group added.
Makes sure that events added at module load time are initialized
properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-6-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pass an iter to st_write_event_mapping, so the function can interate
different things depending on how we initialize the iter.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-5-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows to interate over an event group.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-4-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename trace_event_iter_init() to trace_event_iter_init_pattern(),
add trace_event_iter_init_all() for interating over all events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210601132414.432430-3-kraxel@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Because trace_opt_parse always deletes the options it has parsed,
trace_init_file's call to qemu_find_opts_singleton always
creates an empty -trace option group. Therefore, the subsequent
qemu_opt_get(opts, "file") always returns NULL.
To fix this, save the last "-trace file=..." option in a global
variable and use it later in trace_init_file.
This is similar to what was done before commit 92eecfff32 ("trace:
remove argument from trace_init_file", 2020-11-11), except contained
within trace/control.c and without memory leaks.
Fixes: 92eecfff32 ("trace: remove argument from trace_init_file", 2020-11-11)
Cc: stefanha@redhat.com
Reported-by: armbru@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210209145759.141231-2-pbonzini@redhat.com>
Re-generate tracetool output when the tracetool source code changes. Use
the same approach as qapi_gen_depends and introduce a tracetool_depends
files list so meson is aware of the dependencies.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210125110958.214017-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The tracetool.py script writes to stdout. This means the output filename
is not available to the script. Add the output filename to the
command-line so that the script has access to the filename.
This also simplifies the tracetool.py invocation. It's no longer
necessary to use meson's custom_build(capture : true) to save output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-2-stefanha@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QEMU binaries no longer launch successfully with recent SystemTap
releases. This is because modular QEMU builds link the sdt semaphores
into the main binary instead of into the shared objects where they are
used. The symbol visibility of semaphores is 'hidden' and the dynamic
linker prints an error during module loading:
$ ./configure --enable-trace-backends=dtrace --enable-modules ...
...
Failed to open module: /builddir/build/BUILD/qemu-4.2.0/s390x-softmmu/../block-curl.so: undefined symbol: qemu_curl_close_semaphore
The long-term solution is to generate per-module dtrace .o files and
link them into the module instead of the main binary.
In the short term we can define STAP_SDT_V2 so dtrace(1) produces a .o
file with 'default' symbol visibility instead of 'hidden'. This
workaround is small and easier to merge for QEMU 5.2 and downstream
backports.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1898700
Cc: wcohen@redhat.com
Cc: fche@redhat.com
Cc: kraxel@redhat.com
Cc: rjones@redhat.com
Cc: ddepaula@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-id: 20201119141457.844452-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is not needed, all the callers are just saving what was
retrieved from -trace and trace_init_file can retrieve it
on its own.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20201102115841.4017692-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracing can be enabled at the command line or via the
monitor. Command-line trace options are recorded during
trace_opt_parse(), but tracing is not enabled until the various
front-ends later call trace_init_file(). If the user passes a trace
option on the command-line, remember that and enable tracing during
trace_init_file(). Otherwise, trace_init_file() should record the
trace file specified by the frontend and avoid enabling traces
until the user requests them via the monitor.
This fixes 1b7157be3a and also
db25d56c01, by allowing the user
to enable traces on the command line and also avoiding
unwanted trace-<pid> files when the user has not asked for them.
Fixes: 1b7157be3a
Signed-off-by: Josh DuBois <josh@joshdubois.com>
Message-id: 20200816174610.20253-1-josh@joshdubois.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Build all executables by default except for the known-broken ones.
This also allows running qemu-iotests without manually building
socket_scm_helper.
Reported-by: Max Reitz <mreitz@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_datadir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
dtrace on macOS uses unresolved symbols with a special prefix to define
probes [1], only headers should be generated for USDT (dtrace(1)). But
it doesn't support backwards compatible no-op -G flag [2] and implicit
build rules fail.
1. https://markmail.org/message/6grq2ygr5nwdwsnb
2. https://markmail.org/message/5xrxt2w5m42nojkz
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The simple trace backend is enabled / disabled with a call
to st_set_trace_file_enabled(). When initializing tracing
from the command-line, this must be enabled on startup.
(Prior to db25d56c01, command-line initialization of
simple trace worked because every call to st_set_trace_file
enabled tracing.)
Fixes: db25d56c01
Signed-off-by: Josh DuBois <josh@joshdubois.com>
Message-id: 20200723053359.256928-1-josh@joshdubois.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
st_set_trace_file() accidentally enables tracing. It's called
unconditionally during startup, which is why QEMU built with the
simple trace backend always writes a trace file "trace-$PID".
This has been broken for quite a while. I didn't track down the exact
commit.
Fix st_set_trace_file() to restore the state.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200527065613.25322-1-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Otherwise any -D settings the user may have made get ignored.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-10-alex.bennee@linaro.org>
NULL is a valid log filename used to indicate we want to use stderr
but qemu_set_log_filename (which is called by bsd-user/main.c) was not
handling it correctly.
That also made redundant a couple of NULL checks in calling code which
have been removed.
Signed-off-by: Salvador Fandino <salvador@qindel.com>
Message-Id: <20200123193626.19956-1-salvador@qindel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is easy for the atomic helpers to use trace_mem_build_info
directly, without resorting to symbol pasting. For this usage,
we cannot use trace_mem_get_info, because the MemOp does not
support 16-byte accesses.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already use g_pattern_match elsewhere so remove the duplication.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191205122518.10010-7-alex.bennee@linaro.org>
We are going to re-use mem_info later for plugins and will need to
track the mmu_idx for softmmu code.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
