We already have an extensive mirror test (041) which does cover
cancelling a mirror job, especially after it has emitted the READY
event. However, it does not check what exact events are emitted after
block-job-cancel is executed. More importantly, it does not use
throttling to ensure that it covers the case of block-job-cancel before
READY.
It would be possible to add this case to 041, but considering it is
already our largest test file, it makes sense to create a new file for
these cases.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180501220509.14152-3-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Commit b76e4458b1 ("block/mirror: change
the semantic of 'force' of block-job-cancel") accidentally removed the
ratelimit in the mirror job.
Reintroduce the ratelimit but keep the block-job-cancel force=true
behavior that was added in commit
b76e4458b1.
Note that block_job_sleep_ns() returns immediately when the job is
cancelled. Therefore it's safe to unconditionally call
block_job_sleep_ns() - a cancelled job does not sleep.
This commit fixes the non-deterministic qemu-iotests 185 output. The
test relies on the ratelimit to make the job sleep until the 'quit'
command is processed. Previously the job could complete before the
'quit' command was received since there was no ratelimit.
Cc: Liang Li <liliang.opensource@gmail.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180424123527.19168-1-stefanha@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Improve and fix 169:
- use MIGRATION events instead of RESUME
- make a TODO: enable dirty-bitmaps capability for offline case
- recreate vm_b without -incoming near test end
This (likely) fixes racy faults at least of the following types:
- timeout on waiting for RESUME event
- sha256 mismatch on line 136 (142 after this patch)
- fail to self.vm_b.launch() on line 135 (141 now after this patch)
And surely fixes cat processes, left after test finish.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180411122606.367301-3-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 4486e89c21 ("vl: introduce
vm_shutdown()") added a bdrv_drain_all() call. As a side-effect of the
drain operation the block job iterates one more time than before. The
185 output no longer matches and the test is failing now.
It may be possible to avoid the superfluous block job iteration, but
that type of patch is not suitable late in the QEMU 2.12 release cycle.
This patch simply updates the 185 output file. The new behavior is
correct, just not optimal, so make the test pass again.
Fixes: 4486e89c21 ("vl: introduce vm_shutdown()")
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-iotests doesn't support dmg, and the dmg block driver doesn't
support image creation. Two test cases declare dmg as supported, but
that's obviously wrong for both reasons. Remove the declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Blacklist these formats, as they don't support image creation, as they
say:
> ./qemu-img create -f bochs x 1m
qemu-img: x: Format driver 'bochs' does not support image creation
> ./qemu-img create -f cloop x 1m
qemu-img: x: Format driver 'cloop' does not support image creation
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support "generic" formats like in bash tests with their
_supported_fmt generic
The test, supporting "generic" formats will run if IMGFMT_GENERIC =
true, which is default, except for bochs and cloop. However, you can
use verify_image_format(['generic', 'bochs']), which will run for all
except cloop (for this moment).
Also, add an assert (we don't want set both arguments) and remove
duplication.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If there are more than one events, wait_until_completed() might return
the 2nd event even if the 1st event is JOB_COMPLETED, since the for loop
will continue to run even if completed is set to True.
It never happened before, but it can be triggered when OOB is enabled
due to the RESUME startup message. Fix that up.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180408030542.17855-1-peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaw6CJAAoJEPQH2wBh1c9AZvcIAL51TsxzLBfYbEr7t/OqaYcT
KptgkLn8UPUsVwEaZ1i9T+qpPqUhCgUeqBki4wTpGOfwmRO633L81lhlvLU1RD5f
a9qsIWtvG0eYw+BU4P+ojltufdeQRQMxuLVhoiq2ur9vC8zUy6tEnF+yqOdWHYsm
83Z2T/NFZ192zIwPD3Rq9/+ijllJOhODrHdAcnwBp0IuvlXi5FV7GjccB4scW/Ym
LwDe7cNWv0XlzRlosyhTRs0HiOm+XiLAj5t9dVKFiuZsUwGFEXx6GiRtUutDf1j8
5ham2wiYLsvxnSgRoUk486Txuj2ceNYDOvnllSv3uFh2kZyTaYewOL1acQFmtVw=
=5AX/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-2018-04-03' into queue-block
A fix for preallocated truncation, a new iotest, and a fix to make the iotests work more comfortably on ppc64
# gpg: Signature made Tue Apr 3 17:40:57 2018 CEST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2018-04-03:
iotests: Test abnormally large size in compressed cluster descriptor
qemu-iotests: Use ppc64 qemu_arch on ppc64le host
iotests: Test preallocated truncate of 2G image
block/file-posix: Fix fully preallocated truncate
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
L2 entries for compressed clusters have a field that indicates the
number of sectors used to store the data in the image.
That's however not the size of the compressed data itself, just the
number of sectors where that data is located. The actual data size is
usually not a multiple of the sector size, and therefore cannot be
represented with this field.
The way it works is that QEMU reads all the specified sectors and
starts decompressing the data until there's enough to recover the
original uncompressed cluster. If there are any bytes left that
haven't been decompressed they are simply ignored.
One consequence of this is that even if the size field is larger than
it needs to be QEMU can handle it just fine: it will read more data
from disk but it will ignore the extra bytes.
This test creates an image with two compressed clusters that use 5
sectors (2.5 KB) each, increases the size field to the maximum (8192
sectors, or 4 MB) and verifies that the data can be read without
problems.
This test is important because while the decompressed data takes
exactly one cluster, the maximum value allowed in the compressed size
field is twice the cluster size. So although QEMU won't produce images
with such large values we need to make sure that it can handle them.
Another effect of increasing the size field is that it can make
it include data from the following host cluster(s). In this case
'qemu-img check' will detect that the refcounts are not correct, and
we'll need to rebuild them.
Additionally, this patch also tests that decreasing the size corrupts
the image since the original data can no longer be recovered. In this
case QEMU returns an error when trying to read the compressed data,
but 'qemu-img check' doesn't see anything wrong if the refcounts are
consistent.
One possible task for the future is to make 'qemu-img check' verify
the sizes of the compressed clusters, by trying to decompress the data
and checking that the size stored in the L2 entry is correct.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180329120745.11154-1-berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The qemu target does not always correspond to the host machine type. For
example ppc64le machine target is ppc64. Let's introduce "qemu_arch"
variable to store the matching qemu architecture related to the current
architecture and use it when auto-detecting the default qemu binary.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Message-id: 20180329112053.5399-2-ldoktor@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180228131315.30194-3-mreitz@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Support luks images creatins like in 205
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit ac64273c66 modified the output of iotest 186, changing
the QOM path of floppy drives from /machine/unattached/device[17] to
/machine/unattached/device[13].
Instead of updating the test output to reflect this change, this patch
adds a new filter that hides all QOM paths from the 'Attached to:'
line of the 'info block' command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SCSI controllers are no longer created automatically for
-drive if=scsi, so this patch updates the tests that relied
on that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
patch keeping us from creating too large extents.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauVVBAAoJEPQH2wBh1c9AGtYIAJ1ojl6+guKQHjtzv9W8ch50
2tzH9/lFkhq/Tyay8MCcq1dWQr23tKqusxi6fDHVdc8XIx6fDuPFzWxUQwwLvS81
9CA6Qs2NngkiAs89ZZ0Sc9aj+LzFbKvXDXPYd4FFeLVVzD0CA4qghH5THrrH6LRm
4DoRUK1QejrOC0v2zCRQvEN6RlI6WFGCf9YiYKkdrvswnjtLgOobCt7TvC9Nade2
smGyxtDENkV6bAZgQgxMAlf88GCyKslb4Fu6U+sfKMDejWmlYEREbBsQc+/Gp6Af
R6ZeiXEJ+KUF34RktPTmhJlUbzRc4Mw0Ij7Abrfhtpre9hifIp62XSrM8sasgLo=
=k+ly
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2018-03-26' into staging
A fix for dirty bitmap migration through shared storage, and a VMDK
patch keeping us from creating too large extents.
# gpg: Signature made Mon 26 Mar 2018 21:17:05 BST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2018-03-26:
vmdk: return ERROR when cluster sector is larger than vmdk limitation
iotests: enable shared migration cases in 169
qcow2: fix bitmaps loading when bitmaps already exist
qcow2-bitmap: add qcow2_reopen_bitmaps_rw_hint()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Shared migration for dirty bitmaps is fixed by previous patches,
so we can enable the test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180320170521.32152-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This tests that the .bdrv_truncate implementation for luks doesn't crash
for invalid image sizes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to test resizing even for luks. The only change that is needed
is to explicitly zero out new space for luks because it's undefined.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When we try to allocate new clusters we first look for available ones
starting from s->free_cluster_index and once we find them we increase
their reference counts. Before we get to call update_refcount() to do
this last step s->free_cluster_index is already pointing to the next
cluster after the ones we are trying to allocate.
During update_refcount() it may happen however that we also need to
allocate a new refcount block in order to store the refcounts of these
new clusters (and to complicate things further that may also require
us to grow the refcount table). After all this we don't know if the
clusters that we originally tried to allocate are still available, so
we return -EAGAIN to ask the caller to restart the search for free
clusters.
This is what can happen in a common scenario:
1) We want to allocate a new cluster and we see that cluster N is
free.
2) We try to increase N's refcount but all refcount blocks are full,
so we allocate a new one at N+1 (where s->free_cluster_index was
pointing at).
3) Once we're done we return -EAGAIN to look again for a free
cluster, but now s->free_cluster_index points at N+2, so that's
the one we allocate. Cluster N remains unallocated and we have a
hole in the qcow2 file.
This can be reproduced easily:
qemu-img create -f qcow2 -o cluster_size=512 hd.qcow2 1M
qemu-io -c 'write 0 124k' hd.qcow2
After this the image has 132608 bytes (256 clusters), and the refcount
block is full. If we write 512 more bytes it should allocate two new
clusters: the data cluster itself and a new refcount block.
qemu-io -c 'write 124k 512' hd.qcow2
However the image has now three new clusters (259 in total), and the
first one of them is empty (and unallocated):
dd if=hd.qcow2 bs=512c skip=256 count=1 | hexdump -C
If we write larger amounts of data in the last step instead of the 512
bytes used in this example we can create larger holes in the qcow2
file.
What this patch does is reset s->free_cluster_index to its previous
value when alloc_refcount_block() returns -EAGAIN. This way the caller
will try to allocate again the original clusters if they are still
free.
The output of iotest 026 also needs to be updated because now that
images have no holes some tests fail at a different point and the
number of leaked clusters is different.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Testing on ext4, most 'quick' qcow2 tests took less than 5 seconds,
but 163 took more than 20. Let's remove it from the quick set.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of converting all "backing": null instances into "backing": "",
handle a null value directly in bdrv_open_inherit().
This enables explicitly null backing links for json:{} filenames.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-7-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() parameter order and qapi headers split]
Signed-off-by: Eric Blake <eblake@redhat.com>
CentOS 6 lacks a realpath binary on the base install, which makes
all iotests runs fail since the 2.11 release:
001 - output mismatch (see 001.out.bad)
./check: line 815: realpath: command not found
diff: missing operand after `/home/dummy/qemu/tests/qemu-iotests/001.out'
diff: Try `diff --help' for more information.
Many of the uses of 'realpath' in the check script were being
used on the output of 'type -p' - but that is already an
absolute file name. While a canonical name can often be
shorter (realpath gets rid of /../), it can also be longer (due
to symlink expansion); and we really don't care if the name is
canonical, merely that it was an executable file with an
absolute path. These were broken in commit cceaf1db.
The remaining use of realpath was to convert a possibly relative
filename into an absolute one before calling diff to make it
easier to copy-and-paste the filename for moving the .bad file
into place as the new reference file even when running iotests
out-of-tree (see commit 93e53fb6), but $PWD can achieve the same
purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit bff5554843 added "force_size" into the common.filter for
_filter_img_create(), but test 146 still expects it in the output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Originally we added parallels as a read-only format to qemu-iotests
where we did just some tests with a binary image. Since then, write and
image creation support has been added to the driver, so we can now
enable it in _supported_fmt generic.
The driver doesn't support migration yet, though, so we need to add it
to the list of exceptions in 181.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Expose the "manual" property via QAPI for the backup-related jobs.
As of this commit, this allows the management API to request the
"concluded" and "dismiss" semantics for backup jobs.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Split out the pause command into the actual pause and the wait.
Not every usage presently needs to resubmit a pause request.
The intent with the next commit will be to explicitly disallow
redundant or meaningless pause/resume requests, so the tests
need to become more judicious to reflect that.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're about to add several new states, and booleans are becoming
unwieldly and difficult to reason about. It would help to have a
more explicit bookkeeping of the state of blockjobs. To this end,
add a new "status" field and add our existing states in a redundant
manner alongside the bools they are replacing:
UNDEFINED: Placeholder, default state. Not currently visible to QMP
unless changes occur in the future to allow creating jobs
without starting them via QMP.
CREATED: replaces !!job->co && paused && !busy
RUNNING: replaces effectively (!paused && busy)
PAUSED: Nearly redundant with info->paused, which shows pause_count.
This reports the actual status of the job, which almost always
matches the paused request status. It differs in that it is
strictly only true when the job has actually gone dormant.
READY: replaces job->ready.
STANDBY: Paused, but job->ready is true.
New state additions in coming commits will not be quite so redundant:
WAITING: Waiting on transaction. This job has finished all the work
it can until the transaction converges, fails, or is canceled.
PENDING: Pending authorization from user. This job has finished all the
work it can until the job or transaction is finalized via
block_job_finalize. This implies the transaction has converged
and left the WAITING phase.
ABORTING: Job has encountered an error condition and is in the process
of aborting.
CONCLUDED: Job has ceased all operations and has a return code available
for query and may be dismissed via block_job_dismiss.
NULL: Job has been dismissed and (should) be destroyed. Should never
be visible to QMP.
Some of these states appear somewhat superfluous, but it helps define the
expected flow of a job; so some of the states wind up being synchronous
empty transitions. Importantly, jobs can be in only one of these states
at any given time, which helps code and external users alike reason about
the current condition of a job unambiguously.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test
- start two vms (vm_a, vm_b)
- in a
- do writes from set A
- do writes from set B
- fix bitmap sha256
- clear bitmap
- do writes from set A
- start migration
- than, in b
- wait vm start (postcopy should start)
- do writes from set B
- check bitmap sha256
The test should verify postcopy migration and then merging with delta
(changes in target, during postcopy process).
Reduce supported cache modes to only 'none', because with cache on time
from source.STOP to target.RESUME is unpredictable and we can fail with
timout while waiting for target.RESUME.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180313180320.339796-14-vsementsov@virtuozzo.com
The test starts two vms (vm_a, vm_b), create dirty bitmap in
the first one, do several writes to corresponding device and
then migrate vm_a to vm_b.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180313180320.339796-13-vsementsov@virtuozzo.com
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Simple way to have auto generated filenames with auto cleanup. Like
FilePath but without using 'with' statement and without additional
indentation of the whole test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180312152126.286890-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This test case adds an NBD server export and then invokes
blockdev-snapshot-sync, which changes the BlockDriverState node that the
NBD server's BlockBackend points to. This is an interesting scenario to
test and exercises the code path fixed by the previous commit.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180306204819.11266-3-stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit afe35cde6 added additional actions to test 33, but forgot
to reset the image between tests. As a result, './check -nbd 33'
fails because the qemu-nbd process from the first half is still
occupying the port, preventing the second half from starting a
new qemu-nbd process. Worse, the failure leaves a rogue qemu-nbd
process behind even after the test fails, which causes knock-on
failures to later tests that also want to start qemu-nbd.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180312211156.452139-1-eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
There is a race between the test's 'query-migrate' QMP command after the
QMP 'STOP' event and completing the migration:
The test case invokes 'query-migrate' upon receiving 'STOP'. At this
point the migration thread may still be in the process of completing.
Therefore 'query-migrate' can return 'status': 'active' for a brief
window of time instead of 'status': 'completed'. This results in
qemu-iotests 203 hanging.
Solve the race by enabling the 'events' migration capability, which
causes QEMU to emit migration-specific QMP events that do not suffer
from this race condition. Wait for the QMP 'MIGRATION' event with
'status': 'completed'.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180305155926.25858-1-stefanha@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch tweaks TestParallelOps in iotest 030 so it allocates data
in smaller regions (256KB/512KB instead of 512KB/1MB) and the
block-stream job in test_stream_commit() only needs to copy data that
is at the very end of the image.
This way when the block-stream job is awakened it will finish right
away without any chance of being stopped by block_job_sleep_ns(). This
triggers the bug that was fixed by 3d5d319e12 and
1a63a90750 and is therefore a more useful test
case for parallel block jobs.
After this patch the aforementiond bug can also be reproduced with the
test_stream_parallel() test case.
Since with this change the stream job in test_stream_commit() finishes
early, this patch introduces a similar test case where both jobs are
slowed down so they can actually run in parallel.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Cc: John Snow <jsnow@redhat.com>
Message-id: 20180306130121.30243-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The AFL image is to exercise the code validating image size, which
doesn't work on 32 bit or when out of memory (there is a large
allocation before the interesting point). So check that and skip the
test, instead of faking the result.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180301011413.11531-1-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The majority of our iotests have the executable bit set; fix the
few outliers for consistency.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20180305161824.7188-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
