The existing flag, x86_64_hregs, does not accurately describe
its setting. It is true if and only if a REX prefix has been
seen. Yes, that affects the "h" regs, but that's secondary.
Add PREFIX_REX and include this bit in s->prefix. Add REX_PREFIX
so that the check folds away when x86_64 is compiled out.
Fold away the reg >= 8 check, because bit 3 of the register
number comes from the REX prefix in the first place.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-16-richard.henderson@linaro.org>
LMA disables traditional segmentation, exposing a flat address space.
This means that ADDSEG is off.
Since we're adding an accessor macro, pull the value directly out
of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-15-richard.henderson@linaro.org>
LMA is a pre-requisite for CODE64, so there is no way to disable it
for x86_64-linux-user, and there is no way to enable it for i386.
Since we're adding an accessor macro, pull the value directly out
of flags when we're not assuming a constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-14-richard.henderson@linaro.org>
For x86_64 user-only, there is no way to leave 64-bit mode.
Without x86_64, there is no way to enter 64-bit mode. There is
an existing macro to aid with that; simply place it in the right
place in the ifdef chain.
Since we're adding an accessor macro, pull the value directly out
of flags when we're not assuming a constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-13-richard.henderson@linaro.org>
For user-only, SS32 == !VM86, because we are never in
real-mode. Since we cannot enter vm86 mode for x86_64
user-only, SS32 is always set.
Since we're adding an accessor macro, pull the value
directly out of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-12-richard.henderson@linaro.org>
For user-only, CODE32 == !VM86, because we are never in real-mode.
Since we cannot enter vm86 mode for x86_64 user-only, CODE32 is
always set.
Since we're adding an accessor macro, pull the value directly out
of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-11-richard.henderson@linaro.org>
For i386-linux-user, we can enter vm86 mode via the vm86(2) syscall.
That syscall explicitly returns to 32-bit mode, and the syscall does
not exist for a 64-bit x86_64 executable.
Since we're adding an accessor macro, pull the value directly out of
flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-10-richard.henderson@linaro.org>
On real hardware, the linux kernel has the iopl(2) syscall which
can set IOPL to 3, to allow e.g. the xserver to briefly disable
interrupts while programming the graphics card.
However, QEMU cannot and does not implement this syscall, so the
IOPL is never changed from 0. Which means that all of the checks
vs CPL <= IOPL are false for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-9-richard.henderson@linaro.org>
A user-mode executable always runs in ring 3.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-8-richard.henderson@linaro.org>
A user-mode executable is never in real-mode. Since we're adding
an accessor macro, pull the value directly out of flags for sysemu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-7-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-6-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-5-richard.henderson@linaro.org>
In vm86 mode, we use the same helper as real-mode, but with
an extra check for IOPL. All non-exceptional paths set EFLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-4-richard.henderson@linaro.org>
Split out the check for CPL != 0 and the raising of #GP.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-3-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-2-richard.henderson@linaro.org>
- vhost-user-blk: Fix error handling during initialisation
- Add test cases for the vhost-user-blk export
- Fix leaked Transaction objects
- qcow2: Expose dirty bit in 'qemu-img info'
-----BEGIN PGP SIGNATURE-----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=Xe4O
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- vhost-user-blk: Fix error handling during initialisation
- Add test cases for the vhost-user-blk export
- Fix leaked Transaction objects
- qcow2: Expose dirty bit in 'qemu-img info'
# gpg: Signature made Tue 18 May 2021 11:57:46 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
vhost-user-blk: Check that num-queues is supported by backend
virtio: Fail if iommu_platform is requested, but unsupported
vhost-user-blk: Get more feature flags from vhost device
vhost-user-blk: Improve error reporting in realize
vhost-user-blk: Don't reconnect during initialisation
vhost-user-blk: Make sure to set Error on realize failure
vhost-user-blk-test: test discard/write zeroes invalid inputs
tests/qtest: add multi-queue test case to vhost-user-blk-test
test: new qTest case to test the vhost-user-blk-server
block/export: improve vu_blk_sect_range_ok()
block: Fix Transaction leak in bdrv_reopen_multiple()
block: Fix Transaction leak in bdrv_root_attach_child()
qcow2: set bdi->is_dirty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is no longer used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-16-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can now use MMU_INST_FETCH from access_type for this.
Unify the I/D code paths, making use of prot_for_access_type.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-15-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is no longer used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-14-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can now use MMU_INST_FETCH from access_type for this.
Unify the I/D code paths, making use of prot_for_access_type.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-13-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is no longer used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-12-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can now use MMU_INST_FETCH from access_type for this.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-11-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can now use MMU_INST_FETCH from access_type for this.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-10-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is no longer used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-9-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We can now use MMU_INST_FETCH from access_type for this.
Use prot_for_access_type to simplify everything.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-8-richard.henderson@linaro.org>
[dwg: Remove a stray trailing whitespace]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This replaces 'int rw' with 'MMUAccessType access_type'.
Comparisons vs zero become either MMU_DATA_LOAD or MMU_DATA_STORE,
since we had previously squashed rw to 0 for code access.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-7-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The variable that holds ACCESS_INT, ACCESS_FLOAT, etc is
variously called 'int type' or 'int access_type' within
this file. Standardize on 'int type' throughout.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-6-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We must leave the 'int rwx' parameter to ppc_hash32_handle_mmu_fault
for now, but will clean that up later.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-5-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We must leave the 'int rwx' parameter to ppc_hash64_handle_mmu_fault
for now, but will clean that up later.
Signed-off-by: Ricgard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-4-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We must leave the 'int rwx' parameter to ppc_radix64_handle_mmu_fault
for now, but will clean that up later.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-3-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use this in the three places we currently have a local array
indexed by rwx (which happens to have the same values).
The types will match up correctly with additional changes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210518201146.794854-2-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
TARGET_WORDS_BIGENDIAN may not match the machine endianness if that's a
runtime-configurable parameter.
Fixes: bcb0b7b1a1
Fixes: afae37d98a
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/212
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Message-Id: <20210518133020.58927-1-thatlemon@gmail.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The special logging is unnecessary. It will have been done
immediately before in the log file.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210517205025.3777947-9-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We do not need to emit an exit_tb after an exception,
as the latter will exit via longjmp.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-7-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When single-stepping, force max_insns to 1 in init_disas
so that we exit the translation loop immediately.
Combine the single-step checks in tb_stop, and give the
gdb exception priority over the cpu exception, just as
we already do in gen_lookup_and_goto_ptr.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-6-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have removed all of the fake exceptions, and all real
exceptions exit via DISAS_NORETURN, we can remove this field.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-5-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The translation of branch instructions always results in exit from
the TB. Remove the synthetic "exception" after no more uses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-4-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove the synthetic "exception" after no more uses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-3-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Create a function to handle the details for interacting with icount.
Force the exit from the tb via DISAS_TOO_MANY, which allows chaining
to the next tb, where the code emitted for gen_tb_start() will
determine if we must exit. We can thus remove any matching
conditional call to gen_stop_exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-2-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since ba3e792669, we switched the implementation of icount
to always reset can_do_io at the start of the following TB.
Most of them were removed in 9e9b10c649, but some were missed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210512185441.3619828-10-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove the synthetic "exception" after no more uses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210512185441.3619828-9-matheus.ferst@eldorado.org.br>
Reviewed-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rewrite ppc_tr_tb_stop to handle these new codes.
Convert ctx->exception into these new codes at the end of
ppc_tr_translate_insn, prior to pushing the change back
throughout translate.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210512185441.3619828-8-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Two of the call sites that use gen_debug_exception have already
updated NIP. Only ppc_tr_breakpoint_check requires the update.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210512185441.3619828-7-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since POWERPC_EXCP_TRAP is raised by gen_exception_err,
we will have also set DISAS_NORETURN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210512185441.3619828-6-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since POWERPC_SYSCALL is raised by gen_exception_err,
we will have also set DISAS_NORETURN.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210512185441.3619828-5-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are other valid settings for is_jmp besides
DISAS_NEXT and DISAS_NORETURN, so eliminating that
dichotomy from ppc_tr_translate_insn is helpful.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210512185441.3619828-4-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function was forgotten in the cpu_init code motion series, but it
seems to be used regardless of TCG, and so needs to be moved to support
disabling TCG.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210512140813.112884-4-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>