Commit Graph

206 Commits

Author SHA1 Message Date
Paolo Bonzini 4951967d84 ratelimit: protect with a mutex
Right now, rate limiting is protected by the AioContext mutex, which is
taken for example both by the block jobs and by qmp_block_job_set_speed
(via find_block_job).

We would like to remove the dependency of block layer code on the
AioContext mutex, since most drivers and the core I/O code are already
not relying on it.  However, there is no existing lock that can easily
be taken by both ratelimit_set_speed and ratelimit_calculate_delay,
especially because the latter might run in coroutine context (and
therefore under a CoMutex) but the former will not.

Since concurrent calls to ratelimit_calculate_delay are not possible,
one idea could be to use a seqlock to get a snapshot of slice_ns and
slice_quota.  But for now keep it simple, and just add a mutex to the
RateLimit struct; block jobs are generally not performance critical to
the point of optimizing the clock cycles spent in synchronization.

This also requires the introduction of init/destroy functions, so
add them to the two users of ratelimit.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-04 14:15:35 +02:00
Vladimir Sementsov-Ogievskiy 228ca37e12 block: drop ctx argument from bdrv_root_attach_child
Passing parent aio context is redundant, as child_class and parent
opaque pointer are enough to retrieve it. Drop the argument and use new
bdrv_child_get_parent_aio_context() interface.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:47 +02:00
Vladimir Sementsov-Ogievskiy 3ca1f32257 block: BdrvChildClass: add .get_parent_aio_context handler
Add new handler to get aio context and implement it in all child
classes. Add corresponding public interface to be used soon.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30 12:27:47 +02:00
Peter Maydell 9abda42bf2 nbd patches for 2021-03-09
- Add Vladimir as NBD co-maintainer
 - Fix reporting of holes in NBD_CMD_BLOCK_STATUS
 - Improve command-line parsing accuracy of large numbers (anything going
 through qemu_strtosz), including the deprecation of hex+suffix
 - Improve some error reporting in the block layer
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmBHlmIACgkQp6FrSiUn
 Q2q2cQgAqJWNb4J/ShjvzocDDPzJ0iBitFbg0huFPfbt4DScubEZo5wBJG7vOhOW
 hIHrWCRzGvRgsn0tcSfrgFaegmHKrLgjkibM7ou8ni9NC1kUBd3R/3FBNIMxhYf7
 Q8Kfspl0LRfMJDKF9jdCnQ4Gxcd6h2OIYZqiWVg8V4Tc8WdCpIVOah7e7wjuW8bT
 vgZvfboUWm5AmIF9j/MxuMn+HFZ4ArSuFVL80ZaXlD00vRra7u3HZ8pUfcOlOujg
 7HeouM1E5j3NNE6aZSN++x/EQ3sg0zmirbWUCcgAyRfdRkAmB15uh2PUzPxEIJKH
 UHUIW5LvNtz2+yzOAz2yK29OE523Yg==
 =blE1
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into staging

nbd patches for 2021-03-09

- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD_CMD_BLOCK_STATUS
- Improve command-line parsing accuracy of large numbers (anything going
through qemu_strtosz), including the deprecation of hex+suffix
- Improve some error reporting in the block layer

# gpg: Signature made Tue 09 Mar 2021 15:38:10 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2021-03-09:
  block/qcow2: refactor qcow2_update_options_prepare error paths
  block/qed: bdrv_qed_do_open: deal with errp
  block/qcow2: simplify qcow2_co_invalidate_cache()
  block/qcow2: read_cache_sizes: return status value
  block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps
  block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface
  block/qcow2: qcow2_get_specific_info(): drop error propagation
  blockjob: return status from block_job_set_speed()
  block/mirror: drop extra error propagation in commit_active_start()
  block: drop extra error propagation for bdrv_set_backing_hd
  blockdev: fix drive_backup_prepare() missed error
  block: check return value of bdrv_open_child and drop error propagation
  utils: Deprecate hex-with-suffix sizes
  utils: Improve qemu_strtosz() to have 64 bits of precision
  utils: Enhance testsuite for do_strtosz()
  nbd: server: Report holes for raw images
  MAINTAINERS: add Vladimir as co-maintainer of NBD

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11 13:57:08 +00:00
Vladimir Sementsov-Ogievskiy 775d0c0508 blockjob: return status from block_job_set_speed()
Better to return status together with setting errp. It allows to avoid
error propagation in the caller.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210202124956.63146-8-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2021-03-08 15:14:15 -06:00
Stefano Garzarella 3b6ad6230e blockjob: report a better error message
When a block job fails, we report strerror(-job->job.ret) error
message, also if the job set an error object.
Let's report a better error message using error_get_pretty(job->job.err).

If an error object was not set, strerror(-job->ret) is used as fallback,
as explained in include/qemu/job.h:

typedef struct Job {
    ...
    /**
     * Error object for a failed job.
     * If job->ret is nonzero and an error object was not set, it will be set
     * to strerror(-job->ret) during job_completed.
     */
    Error *err;
}

In block_job_query() there can be a transient where 'job.err' is not set
by a scheduled bottom half. In that case we use strerror(-job->ret) as it
was before.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210225103633.76746-1-sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-03-08 14:55:18 +01:00
Michael Qiu 076d467aac blockjob: Fix crash with IOthread when block commit after snapshot
Currently, if guest has workloads, IO thread will acquire aio_context
lock before do io_submit, it leads to segmentfault when do block commit
after snapshot. Just like below:

Program received signal SIGSEGV, Segmentation fault.

[Switching to Thread 0x7f7c7d91f700 (LWP 99907)]
0x00005576d0f65aab in bdrv_mirror_top_pwritev at ../block/mirror.c:1437
1437    ../block/mirror.c: No such file or directory.
(gdb) p s->job
$17 = (MirrorBlockJob *) 0x0
(gdb) p s->stop
$18 = false

Call trace of IO thread:
0  0x00005576d0f65aab in bdrv_mirror_top_pwritev at ../block/mirror.c:1437
1  0x00005576d0f7f3ab in bdrv_driver_pwritev at ../block/io.c:1174
2  0x00005576d0f8139d in bdrv_aligned_pwritev at ../block/io.c:1988
3  0x00005576d0f81b65 in bdrv_co_pwritev_part at ../block/io.c:2156
4  0x00005576d0f8e6b7 in blk_do_pwritev_part at ../block/block-backend.c:1260
5  0x00005576d0f8e84d in blk_aio_write_entry at ../block/block-backend.c:1476
...

Switch to qemu main thread:
0  0x00007f903be704ed in __lll_lock_wait at
/lib/../lib64/libpthread.so.0
1  0x00007f903be6bde6 in _L_lock_941 at /lib/../lib64/libpthread.so.0
2  0x00007f903be6bcdf in pthread_mutex_lock at
/lib/../lib64/libpthread.so.0
3  0x0000564b21456889 in qemu_mutex_lock_impl at
../util/qemu-thread-posix.c:79
4  0x0000564b213af8a5 in block_job_add_bdrv at ../blockjob.c:224
5  0x0000564b213b00ad in block_job_create at ../blockjob.c:440
6  0x0000564b21357c0a in mirror_start_job at ../block/mirror.c:1622
7  0x0000564b2135a9af in commit_active_start at ../block/mirror.c:1867
8  0x0000564b2133d132 in qmp_block_commit at ../blockdev.c:2768
9  0x0000564b2141fef3 in qmp_marshal_block_commit at
qapi/qapi-commands-block-core.c:346
10 0x0000564b214503c9 in do_qmp_dispatch_bh at
../qapi/qmp-dispatch.c:110
11 0x0000564b21451996 in aio_bh_poll at ../util/async.c:164
12 0x0000564b2146018e in aio_dispatch at ../util/aio-posix.c:381
13 0x0000564b2145187e in aio_ctx_dispatch at ../util/async.c:306
14 0x00007f9040239049 in g_main_context_dispatch at
/lib/../lib64/libglib-2.0.so.0
15 0x0000564b21447368 in main_loop_wait at ../util/main-loop.c:232
16 0x0000564b21447368 in main_loop_wait at ../util/main-loop.c:255
17 0x0000564b21447368 in main_loop_wait at ../util/main-loop.c:531
18 0x0000564b212304e1 in qemu_main_loop at ../softmmu/runstate.c:721
19 0x0000564b20f7975e in main at ../softmmu/main.c:50

In IO thread when do bdrv_mirror_top_pwritev, the job is NULL, and stop field
is false, this means the MirrorBDSOpaque "s" object has not been initialized
yet, and this object is initialized by block_job_create(), but the initialize
process is stuck in acquiring the lock.

In this situation, IO thread come to bdrv_mirror_top_pwritev(),which means that
mirror-top node is already inserted into block graph, but its bs->opaque->job
is not initialized.

The root cause is that qemu main thread do release/acquire when hold the lock,
at the same time, IO thread get the lock after release stage, and the crash
occured.

Actually, in this situation, job->job.aio_context will not equal to
qemu_get_aio_context(), and will be the same as bs->aio_context,
thus, no need to release the lock, becasue bdrv_root_attach_child()
will not change the context.

This patch fix this issue.

Fixes: 132ada80 "block: Adjust AioContexts when attaching nodes"

Signed-off-by: Michael Qiu <qiudayu@huayun.com>
Message-Id: <20210203024059.52683-1-08005325@163.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-02-15 15:10:14 +01:00
Vladimir Sementsov-Ogievskiy e0323a045f blockjob: add set_speed to BlockJobDriver
We are going to use async block-copy call in backup, so we'll need to
passthrough setting backup speed to block-copy call.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-9-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2021-01-26 14:36:37 +01:00
Stefan Hajnoczi d73415a315 qemu/atomic.h: rename atomic_ to qatomic_
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:

  $ CC=clang CXX=clang++ ./configure ... && make
  ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)

Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.

This patch was generated using:

  $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
    sort -u >/tmp/changed_identifiers
  $ for identifier in $(</tmp/changed_identifiers); do
        sed -i "s%\<$identifier\>%q$identifier%g" \
            $(git grep -I -l "\<$identifier\>")
    done

I manually fixed line-wrap issues and misaligned rST tables.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-23 16:07:44 +01:00
Max Reitz 258b776515 block: Add BdrvChildRole to BdrvChild
For now, it is always set to 0.  Later patches in this series will
ensure that all callers pass an appropriate combination of flags.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18 19:05:25 +02:00
Max Reitz bd86fb990c block: Rename BdrvChildRole to BdrvChildClass
This structure nearly only contains parent callbacks for child state
changes.  It cannot really reflect a child's role, because different
roles may overlap (as we will see when real roles are introduced), and
because parents can have custom callbacks even when the child fulfills a
standard role.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-18 19:05:25 +02:00
Eric Blake a3aeeab557 block: Add blk_new_with_bs() helper
There are several callers that need to create a new block backend from
an existing BDS; make the task slightly easier with a common helper
routine.

Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424190903.522087-2-eblake@redhat.com>
[mreitz: Set @ret only in error paths, see
 https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-05-05 13:17:36 +02:00
Vladimir Sementsov-Ogievskiy 01fe1ca945 job: refactor progress to separate object
We need it in separate to pass to the block-copy object in the next
commit.

Cc: qemu-stable@nongnu.org
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-2-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-03-11 12:42:30 +01:00
Kevin Wolf 1ef7d9d368 blockjob: Fix error message for negative speed
The error message for a negative speed uses QERR_INVALID_PARAMETER,
which implies that the 'speed' option doesn't even exist:

    {"error": {"class": "GenericError", "desc": "Invalid parameter 'speed'"}}

Make it use QERR_INVALID_PARAMETER_VALUE instead:

    {"error": {"class": "GenericError", "desc": "Parameter 'speed' expects a non-negative value"}}

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2019-12-18 11:21:07 +01:00
Sergio Lopez d876bf676f blockjob: update nodes head while removing all bdrv
block_job_remove_all_bdrv() iterates through job->nodes, calling
bdrv_root_unref_child() for each entry. The call to the latter may
reach child_job_[can_]set_aio_ctx(), which will also attempt to
traverse job->nodes, potentially finding entries that where freed
on previous iterations.

To avoid this situation, update job->nodes head on each iteration to
ensure that already freed entries are no longer linked to the list.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1746631
Signed-off-by: Sergio Lopez <slp@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190911100316.32282-1-mreitz@redhat.com
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-09-16 15:31:12 +02:00
Vladimir Sementsov-Ogievskiy bb0c940993 job: drop job_drain
In job_finish_sync job_enter should be enough for a job to make some
progress and draining is a wrong tool for it. So use job_enter directly
here and drop job_drain with all related staff not used more.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-09-10 08:58:43 +02:00
Peter Maydell e018ccb3fb Block layer patches:
- file-posix: Fix O_DIRECT alignment detection
 - Fixes for concurrent block jobs
 - block-backend: Queue requests while drained (fix IDE vs. job crashes)
 - qemu-img convert: Deprecate using -n and -o together
 - iotests: Migration tests with filter nodes
 - iotests: More media change tests
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdVnduAAoJEH8JsnLIjy/W0IgQAKft/M3aDgt0sbTzQh8vdy6A
 yAfTnnSL4Z56+8qAsqhEnplC3rZxvTkg9AGOoNYHOZKl3FgRH9r8g9/Enemh4fWu
 MH52hiRf2ytlFVurIQal3aj9O+i0YTnzuvYbysvkH4ID5zbv2QnwdagtEcBxbbYL
 NZTMZBynDzp4rKIZ7p6T/kkaklLHh4vZrjW+Mzm3LQx9JJr8TwVNqqetSfc4VKIJ
 ByaNbbihDUVjQyIaJ24DXXJdzonGrrtSbSZycturc5FzXymzSRgrXZCeSKCs8X+i
 fjwMXH5v4/UfK511ILsXiumeuxBfD2Ck4sAblFxVo06oMPRNmsAKdRLeDByE7IC1
 lWep/pB3y/au9CW2/pkWJOiaz5s5iuv2fFYidKUJ0KQ1dD7G8M9rzkQlV3FUmTZO
 jBKSxHEffXsYl0ojn0vGmZEd7FAPi3fsZibGGws1dVgxlWI93aUJsjCq0E+lHIRD
 hEmQcjqZZa4taKpj0Y3Me05GkL7tH6RYA153jDNb8rPdzriGRCLZSObEISrOJf8H
 Mh0gTLi8KJNh6bULd12Ake1tKn7ZeTXpHH+gadz9OU7eIModh1qYTSHPlhy5oAv0
 Hm9BikNlS1Hzw+a+EbLcOW7TrsteNeGr7r8T6QKPMq1sfsYcp3svbC2c+zVlQ6Ll
 mLoTssksXOkgBevVqSiS
 =T7L5
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs
- block-backend: Queue requests while drained (fix IDE vs. job crashes)
- qemu-img convert: Deprecate using -n and -o together
- iotests: Migration tests with filter nodes
- iotests: More media change tests

# gpg: Signature made Fri 16 Aug 2019 10:29:18 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  file-posix: Handle undetectable alignment
  qemu-img convert: Deprecate using -n and -o together
  block-backend: Queue requests while drained
  mirror: Keep mirror_top_bs drained after dropping permissions
  block: Remove blk_pread_unthrottled()
  iotests: Add test for concurrent stream/commit
  tests: Test mid-drain bdrv_replace_child_noperm()
  tests: Test polling in bdrv_drop_intermediate()
  block: Reduce (un)drains when replacing a child
  block: Keep subtree drained in drop_intermediate
  block: Simplify bdrv_filter_default_perms()
  iotests: Test migration with all kinds of filter nodes
  iotests: Move migration helpers to iotests.py
  iotests/118: Add -blockdev based tests
  iotests/118: Create test classes dynamically
  iotests/118: Test media change for scsi-cd

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16 16:43:46 +01:00
Markus Armbruster db72581598 Include qemu/main-loop.h less
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).  It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.

Include qemu/main-loop.h only where it's needed.  Touching it now
recompiles only some 1700 objects.  For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800.  For the
others, they shrink only slightly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Kevin Wolf cf3129323f block-backend: Queue requests while drained
This fixes devices like IDE that can still start new requests from I/O
handlers in the CPU thread while the block backend is drained.

The basic assumption is that in a drain section, no new requests should
be allowed through a BlockBackend (blk_drained_begin/end don't exist,
we get drain sections only on the node level). However, there are two
special cases where requests should not be queued:

1. Block jobs: We already make sure that block jobs are paused in a
   drain section, so they won't start new requests. However, if the
   drain_begin is called on the job's BlockBackend first, it can happen
   that we deadlock because the job stays busy until it reaches a pause
   point - which it can't if its requests aren't processed any more.

   The proper solution here would be to make all requests through the
   job's filter node instead of using a BlockBackend. For now, just
   disabling request queuing on the job BlockBackend is simpler.

2. In test cases where making requests through bdrv_* would be
   cumbersome because we'd need a BdrvChild. As we already got the
   functionality to disable request queuing from 1., use it in tests,
   too, for convenience.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2019-08-16 10:25:16 +02:00
Max Reitz e037c09c78 block: Do not poll in bdrv_do_drained_end()
We should never poll anywhere in bdrv_do_drained_end() (including its
recursive callees like bdrv_drain_invoke()), because it does not cope
well with graph changes.  In fact, it has been written based on the
postulation that no graph changes will happen in it.

Instead, the callers that want to poll must poll, i.e. all currently
globally available wrappers: bdrv_drained_end(),
bdrv_subtree_drained_end(), bdrv_unapply_subtree_drain(), and
bdrv_drain_all_end().  Graph changes there do not matter.

They can poll simply by passing a pointer to a drained_end_counter and
wait until it reaches 0.

This patch also adds a non-polling global wrapper for
bdrv_do_drained_end() that takes a drained_end_counter pointer.  We need
such a variant because now no function called anywhere from
bdrv_do_drained_end() must poll.  This includes
BdrvChildRole.drained_end(), which already must not poll according to
its interface documentation, but bdrv_child_cb_drained_end() just
violates that by invoking bdrv_drained_end() (which does poll).
Therefore, BdrvChildRole.drained_end() must take a *drained_end_counter
parameter, which bdrv_child_cb_drained_end() can pass on to the new
bdrv_drained_end_no_poll() function.

Note that we now have a pattern of all drained_end-related functions
either polling or receiving a *drained_end_counter to let the caller
poll based on that.

A problem with a single poll loop is that when the drained section in
bdrv_set_aio_context_ignore() ends, some nodes in the subgraph may be in
the old contexts, while others are in the new context already.  To let
the collective poll in bdrv_drained_end() work correctly, we must not
hold a lock to the old context, so that the old context can make
progress in case it is different from the current context.

(In the process, remove the comment saying that the current context is
always the old context, because it is wrong.)

In all other places, all nodes in a subtree must be in the same context,
so we can just poll that.  The exception of course is
bdrv_drain_all_end(), but that always runs in the main context, so we
can just poll NULL (like bdrv_drain_all_begin() does).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-07-19 13:19:16 +02:00
Vladimir Sementsov-Ogievskiy b23c580c94 block: drop bs->job
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
   BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
   3.1 Some jobs creates filters to be their main node, so, this check
   don't actually prevent creating second job on same real node (which
   will create another filter node) (but I hope it is restricted by
   other mechanisms)
   3.2 Even without bs->job we have two systems of permissions:
   op-blockers and BLK_PERM
   3.3 We may want to run several jobs on one node one day

And finally, drop bs->job pointer itself. Hurrah!

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Vladimir Sementsov-Ogievskiy 8164102ffe blockdev: blockdev_mark_auto_del: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in
blockdev_mark_auto_del: instead of looking at bs->job let's check all
jobs for references to bs.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Markus Armbruster a8d2532645 Include qemu-common.h exactly where needed
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
2019-06-12 13:20:20 +02:00
Kevin Wolf 132ada80c4 block: Adjust AioContexts when attaching nodes
So far, we only made sure that updating the AioContext of a node
affected the whole subtree. However, if a node is newly attached to a
new parent, we also need to make sure that both the subtree of the node
and the parent are in the same AioContext. This tries to move the new
child node to the parent AioContext and returns an error if this isn't
possible.

BlockBackends now actually apply their AioContext to their root node.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Kevin Wolf d861ab3acf block: Add BlockBackend.ctx
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).

The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-04 15:22:22 +02:00
Alberto Garcia b441dc71c0 block: Make bdrv_root_attach_child() unref child_bs on failure
A consequence of the previous patch is that bdrv_attach_child()
transfers the reference to child_bs from the caller to parent_bs,
which will drop it on bdrv_close() or when someone calls
bdrv_unref_child().

But this only happens when bdrv_attach_child() succeeds. If it fails
then the caller is responsible for dropping the reference to child_bs.

This patch makes bdrv_attach_child() take the reference also when
there is an error, freeing the caller for having to do it.

A similar situation happens with bdrv_root_attach_child(), so the
changes on this patch affect both functions.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20dfb3d9ccec559cdd1a9690146abad5d204a186.1557754872.git.berto@igalia.com
[mreitz: Removed now superfluous BdrvChild * variable in
         bdrv_open_child()]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-05-28 20:30:55 +02:00
Kevin Wolf 657e120320 blockjob: Remove AioContext notifiers
The notifiers made sure that the job is quiesced and that the
job->aio_context field is updated. The first part is unnecessary today
since bdrv_set_aio_context_ignore() drains the block node, and this
means drainig the block job, too. The second part can be done in the
.set_aio_ctx callback of the block job BdrvChildRole.

The notifiers were problematic because they poll the AioContext while
the graph is in an inconsistent state with some nodes already in the new
context, but others still in the old context. So removing the notifiers
not only simplifies the code, but actually makes the code safer.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20 17:08:56 +02:00
Kevin Wolf 9ff7f0df87 blockjob: Propagate AioContext change to all job nodes
Block jobs require that all of the nodes the job is using are in the
same AioContext. Therefore all BdrvChild objects of the job propagate
.(can_)set_aio_context to all other job nodes, so that the switch is
checked and performed consistently even if both nodes are in different
subtrees.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-05-20 17:08:56 +02:00
Vladimir Sementsov-Ogievskiy 8d9648cbf3 blockjob: fix user pause in block_job_error_action
Job (especially mirror) may call block_job_error_action several
times before actual pause if it has several in-flight requests.

block_job_error_action will call job_pause more than once in this case,
which lead to following block-job-resume qmp command can't actually
resume the job.

Fix it by do not increase pause level in block_job_error_action if
user_paused already set.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-19 15:49:29 +01:00
Kevin Wolf cfe29d8294 block: Use a single global AioWait
When draining a block node, we recurse to its parent and for subtree
drains also to its children. A single AIO_WAIT_WHILE() is then used to
wait for bdrv_drain_poll() to become true, which depends on all of the
nodes we recursed to. However, if the respective child or parent becomes
quiescent and calls bdrv_wakeup(), only the AioWait of the child/parent
is checked, while AIO_WAIT_WHILE() depends on the AioWait of the
original node.

Fix this by using a single AioWait for all callers of AIO_WAIT_WHILE().

This may mean that the draining thread gets a few more unnecessary
wakeups because an unrelated operation got completed, but we already
wake it up when something _could_ have changed rather than only if it
has certainly changed.

Apart from that, drain is a slow path anyway. In theory it would be
possible to use wakeups more selectively and still correctly, but the
gains are likely not worth the additional complexity. In fact, this
patch is a nice simplification for some places in the code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:50:15 +02:00
Kevin Wolf b5a7a05735 blockjob: Lie better in child_job_drained_poll()
Block jobs claim in .drained_poll() that they are in a quiescent state
as soon as job->deferred_to_main_loop is true. This is obviously wrong,
they still have a completion BH to run. We only get away with this
because commit 91af091f92 added an unconditional aio_poll(false) to the
drain functions, but this is bypassing the regular drain mechanisms.

However, just removing this and telling that the job is still active
doesn't work either: The completion callbacks themselves call drain
functions (directly, or indirectly with bdrv_reopen), so they would
deadlock then.

As a better lie, tell that the job is active as long as the BH is
pending, but falsely call it quiescent from the point in the BH when the
completion callback is called. At this point, nested drain calls won't
deadlock because they ignore the job, and outer drains will wait for the
job to really reach a quiescent state because the callback is already
running.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:50:15 +02:00
Kevin Wolf 34dc97b9a0 blockjob: Wake up BDS when job becomes idle
In the context of draining a BDS, the .drained_poll callback of block
jobs is called. If this returns true (i.e. there is still some activity
pending), the drain operation may call aio_poll() with blocking=true to
wait for completion.

As soon as the pending activity is completed and the job finally arrives
in a quiescent state (i.e. its coroutine either yields with busy=false
or terminates), the block job must notify the aio_poll() loop to wake
up, otherwise we get a deadlock if both are running in different
threads.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-09-25 15:50:15 +02:00
Peter Xu 3ab72385b2 qapi: Drop qapi_event_send_FOO()'s Error ** argument
The generated qapi_event_send_FOO() take an Error ** argument.  They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().

Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.

Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-28 18:21:38 +02:00
Kevin Wolf 89bd030533 block: Really pause block jobs on drain
We already requested that block jobs be paused in .bdrv_drained_begin,
but no guarantee was made that the job was actually inactive at the
point where bdrv_drained_begin() returned.

This introduces a new callback BdrvChildRole.bdrv_drained_poll() and
uses it to make bdrv_drain_poll() consider block jobs using the node to
be drained.

For the test case to work as expected, we have to switch from
block_job_sleep_ns() to qemu_co_sleep_ns() so that the test job is even
considered active and must be waited for when draining the node.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-06-18 15:03:25 +02:00
Kevin Wolf 9f6bb4c004 blockjob: Remove BlockJob.driver
BlockJob.driver is redundant with Job.driver and only used in very few
places any more. Remove it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf 30a5c887bf job: Move progress fields to Job
BlockJob has fields .offset and .len, which are actually misnomers today
because they are no longer tied to block device sizes, but just progress
counters. As such they make a lot of sense in generic Jobs.

This patch moves the fields to Job and renames them to .progress_current
and .progress_total to describe their function better.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf 2e1795b581 job: Add job_transition_to_ready()
The transition to the READY state was still performed in the BlockJob
layer, in the same function that sent the BLOCK_JOB_READY QMP event.

This patch brings the state transition to the Job layer and implements
the QMP event using a notifier called from the Job layer, like we
already do for other events related to state transitions.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf df956ae201 job: Add job_is_ready()
Instead of having a 'bool ready' in BlockJob, add a function that
derives its value from the job status.

At the same time, this fixes the behaviour to match what the QAPI
documentation promises for query-block-job: 'true if the job may be
completed'. When the ready flag was introduced in commit ef6dbf1e46,
the flag never had to be reset to match the description because after
being ready, the jobs would immediately complete and disappear.

Job transactions and manual job finalisation were introduced only later.
With these changes, jobs may stay around even after having completed
(and they are not ready to be completed a second time), however their
patches forgot to reset the ready flag.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf 5f9a6a08e8 job: Add job_dismiss()
This moves block_job_dismiss() to the Job layer.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf 198c49cc8d job: Add job_yield()
This moves block_job_yield() to the Job layer.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf 3d70ff53b6 job: Move completion and cancellation to Job
This moves the top-level job completion and cancellation functions from
BlockJob to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf 7eaa8fb57d job: Move transactions to Job
This moves the logic that implements job transactions from BlockJob to
Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:51 +02:00
Kevin Wolf 62c9e4162a job: Switch transactions to JobTxn
This doesn't actually move any transaction code to Job yet, but it
renames the type for transactions from BlockJobTxn to JobTxn and makes
them contain Jobs rather than BlockJobs

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf 6a74c075ac job: Move job_finish_sync() to Job
block_job_finish_sync() doesn't contain anything block job specific any
more, so it can be moved to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf 3453d97243 job: Move .complete callback to Job
This moves the .complete callback that tells a READY job to complete
from BlockJobDriver to JobDriver. The wrapper function job_complete()
doesn't require anything block job specific any more and can be moved
to Job.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf b69f777dd9 job: Add job_drain()
block_job_drain() contains a blk_drain() call which cannot be moved to
Job, so add a new JobDriver callback JobDriver.drain which has a common
implementation for all BlockJobs. In addition to this we keep the
existing BlockJobDriver.drain callback that is called by the common
drain implementation for all block jobs.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf 004e95df98 job: Convert block_job_cancel_async() to Job
block_job_cancel_async() did two things that were still block job
specific:

* Setting job->force. This field makes sense on the Job level, so we can
  just move it. While at it, rename it to job->force_cancel to make its
  purpose more obvious.

* Resetting the I/O status. This can't be moved because generic Jobs
  don't have an I/O status. What the function really implements is a
  user resume, except without entering the coroutine. Consequently, it
  makes sense to call the .user_resume driver callback here which
  already resets the I/O status.

  The old block_job_cancel_async() has two separate if statements that
  check job->iostatus != BLOCK_DEVICE_IO_STATUS_OK and job->user_paused.
  However, the former condition always implies the latter (as is
  asserted in block_job_iostatus_reset()), so changing the explicit call
  of block_job_iostatus_reset() on the former condition with the
  .user_resume callback on the latter condition is equivalent and
  doesn't need to access any BlockJob specific state.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf 4ad351819b job: Move single job finalisation to Job
This moves the finalisation of a single job from BlockJob to Job.

Some part of this code depends on job transactions, and job transactions
call this code, we introduce some temporary calls from Job functions to
BlockJob ones. This will be fixed once transactions move to Job, too.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf 139a9f020d job: Add job_event_*()
Go through the Job layer in order to send QMP events. For the moment,
these functions only call a notifier in the BlockJob layer that sends
the existing commands.

This uses notifiers rather than JobDriver callbacks because internal
users of jobs won't receive QMP events, but might still be interested
in getting notified for the events.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00
Kevin Wolf 5d4f376998 blockjob: Split block_job_event_pending()
block_job_event_pending() doesn't only send a QMP event, but it also
transitions to the PENDING state. Split the function so that we get one
part only sending the event (like other block_job_event_* functions) and
another part that does the state transition.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2018-05-23 14:30:50 +02:00