First step cleaning up the drives handling. This one does nothing but
removing drives_table[], still it became seriously big.
drive_get_index() is gone and is replaced by drives_get() which hands
out DriveInfo pointers instead of a table index. This needs adaption in
*tons* of places all over.
The drives are now maintained as linked list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add monitor commands to support passing file descriptors via
SCM_RIGHTS.
getfd assigns the passed file descriptor a name for use with other
monitor commands.
closefd allows passed file descriptors to be closed. If a monitor
command actually uses a named file descriptor, closefd will not be
required.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Useful for testing hardware emulations or manipulating its state to
stress guest drivers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move registration function for the boot_set callback handler and provide
qemu_boot_set so that it can also be used outside the monitor code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- MCE features are initialized when VCPU is intialized according to CPUID.
- A monitor command "mce" is added to inject a MCE.
- A new interrupt mask: CPU_INTERRUPT_MCE is added to inject the MCE.
aliguori: fix build for linux-user
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Refactor the ACL monitor interface to make full use of the monitor
command dispatcher. This also gives proper help formatting and command
completion. Note that 'acl allow' and 'acl deny' were combined to
'acl_add aclname match allow|deny [index]' for consistency reasons.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Break out sockstats from the slirp statistics and present them under the
new info category "usernet". This patch also improves the current output
/wrt proper reporting connection source and destination.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move code to extract command name into a function of its own, this
clearifies the code and let us remove two variables from
monitor_handle_command().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The 'found' goto in monitor_handle_command() can be dropped if we check
for 'cmd->name' after looking up for the command to execute.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In case you're wondering what connections exactly you have open
or maybe redir'ed in the past, you can't really find out from qemu
right now.
This patch enables you to see all current connections the host
only networking holds open, so you can kill them using the previous
patch.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Using the new host_net_redir command you can easily create redirections
on the fly while your VM is running.
While that's great, it's missing the removal of redirections, in case you
want to have a port closed again at a later point in time.
This patch adds support for removal of redirections.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is no user-flippable switch, and no arch makes use of disabling
gdbstub support. So it's pointless to keep the related #ifdefs and
configure hunks around - and risking breakages like 711c410fdd again.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Here is an updated hardware watchdog patch, which should fix
everything that was raised about the previous version ...
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
adds an "info numa" command to the monitor to output the current
topology. Since NUMA is advertised via static ACPI tables, no changes are
possible during runtime.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7211 c046a42c-6fe2-441c-8c8c-71466251a162
Allow to establish a TCP/UDP connection redirection also via a monitor
command 'host_net_redir'. Moreover, assume TCP as connection type if
that parameter is omitted.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
There is nothing x86-specific in host_net_add/remove, so allow them for
all targets.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7202 c046a42c-6fe2-441c-8c8c-71466251a162
Fix the documentation of the host_net_add monitor command and allow the
user to pass no options at all. Moreover, inform the user on the
monitor terminal if a request failed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7201 c046a42c-6fe2-441c-8c8c-71466251a162
This patch is derived from Tristan Gingold's patch. It adds a new VLAN
client type that writes all traffic on the VLAN it is attached to into a
pcap file. Such a file can then be analyzed offline with Wireshark or
tcpdump.
Besides rebasing and some minor cleanups, the major differences to the
original version are:
- support for enabling/disabling via the monitor (host_net_add/remove)
- no special ordering of VLAN client list, qemu_send_packet now takes
care of properly ordered packets
- 64k default capturing limit (I hate tcpdump's default)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162
Align some monitor help texts to the related command parameter
definitions. host_net_add is skipped intentionally, will be slightly
reworked in a separate patch later.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7180 c046a42c-6fe2-441c-8c8c-71466251a162
Allows distributors to identify their builds without needing to hack the
sources.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7036 c046a42c-6fe2-441c-8c8c-71466251a162
This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.
Add monitor command to enable or disable single step mode.
Modify monitor command "info status" to display single step mode.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
Introduce a more canonical gdbstub configuration (system emulation only)
via the new switch '-gdb dev'. Keep '-s' as shorthand for
'-gdb tcp::1234'. Use the same syntax also for the corresponding monitor
command 'gdbserver'. Its default remains to listen on TCP port 1234.
Changes in v4:
- Rebased over new command line switches meta file
Changes in v3:
- Fix documentation
Changes in v2:
- Support for pipe-based like to gdb (target remote | qemu -gdb stdio)
- Properly update the qemu-doc
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6992 c046a42c-6fe2-441c-8c8c-71466251a162
[ Note: depends on char closing fixes ]
Properly clean up the gdbstub when the user tries to re-open it
(possibly under a different address). Moreover, allow to shut it down
from the monitor via 'gdbserver none'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6913 c046a42c-6fe2-441c-8c8c-71466251a162
Ported from the KVM tree: Synchronize the qemu cpu state with kvm's
before invoking various monitor info commands (like 'info registers').
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6826 c046a42c-6fe2-441c-8c8c-71466251a162
Allow completion of concatenated key strings for the sendkey command.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6784 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a generic internal API for access control lists
to be used by network servers in QEMU. It adds support for checking
these ACL in the VNC server, in two places. The first ACL is for the
SASL authentication mechanism, checking the SASL username. This ACL
is called 'vnc.username'. The second is for the TLS authentication
mechanism, when x509 client certificates are turned on, checking against
the Distinguished Name of the client. This ACL is called 'vnc.x509dname'
The internal API provides for an ACL with the following characteristics
- A unique name, eg vnc.username, and vnc.x509dname.
- A default policy, allow or deny
- An ordered series of match rules, with allow or deny policy
If none of the match rules apply, then the default policy is
used.
There is a monitor API to manipulate the ACLs, which I'll describe via
examples
(qemu) acl show vnc.username
policy: allow
(qemu) acl policy vnc.username denya
acl: policy set to 'deny'
(qemu) acl allow vnc.username fred
acl: added rule at position 1
(qemu) acl allow vnc.username bob
acl: added rule at position 2
(qemu) acl allow vnc.username joe 1
acl: added rule at position 1
(qemu) acl show vnc.username
policy: deny
0: allow fred
1: allow joe
2: allow bob
(qemu) acl show vnc.x509dname
policy: allow
(qemu) acl policy vnc.x509dname deny
acl: policy set to 'deny'
(qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=*
acl: added rule at position 1
(qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob
acl: added rule at position 2
(qemu) acl show vnc.x509dname
policy: deny
0: allow C=GB,O=ACME,L=London,CN=*
1: allow C=GB,O=ACME,L=Boston,CN=bob
By default the VNC server will not use any ACLs, allowing access to
the server if the user successfully authenticates. To enable use of
ACLs to restrict user access, the ',acl' flag should be given when
starting QEMU. The initial ACL activated will be a 'deny all' policy
and should be customized using monitor commands.
eg enable SASL auth and ACLs
qemu .... -vnc localhost:1,sasl,acl
The next patch will provide a way to load a pre-defined ACL when
starting up
Makefile | 6 +
b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
b/acl.h | 74 ++++++++++++++++++++++
configure | 18 +++++
monitor.c | 95 ++++++++++++++++++++++++++++
qemu-doc.texi | 49 ++++++++++++++
vnc-auth-sasl.c | 16 +++-
vnc-auth-sasl.h | 7 ++
vnc-tls.c | 19 +++++
vnc-tls.h | 3
vnc.c | 21 ++++++
vnc.h | 3
12 files changed, 491 insertions(+), 5 deletions(-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
This allows to create monitor terminals that do not make use of the
interactive readline back-end but rather send complete commands. The
pass-through monitor interface of the gdbstub will be an example.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6717 c046a42c-6fe2-441c-8c8c-71466251a162
Up to now, you never really knew if you already switched the console
after pressing CTRL-A C or if you mistyped it again. This patch
clarifies the situation by providing a prompt in a new line and
injecting a linebreak when switching away again. For this purpose, the
two events CHR_EVENT_MUX_IN and CHR_EVENT_MUX_OUT are introduced and
distributed on focus switches.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6716 c046a42c-6fe2-441c-8c8c-71466251a162
Currently all registered (and activate) monitor terminals work in
broadcast mode: Everyone sees what someone else types on some other
terminal and what the monitor reports back. This model is broken when
you have a management monitor terminal that is automatically operated
and some other terminal used for independent guest inspection. Such
additional terminals can be multiplexed device channels or a gdb
frontend connected to QEMU's stub.
Therefore, this patch decouples the buffers and states of all monitor
terminals, allowing the user to operate them independently. It finally
starts to use the 'mon' parameter that was introduced earlier with the
API rework. It also defines the default monitor: the first instantance
that has the MONITOR_IS_DEFAULT flag set, and that is the monitor
created via the "-monitor" command line switch (or "vc" if none is
given).
As the patch requires to rework the monitor suspension interface, it
also takes the freedom to make it "truely" suspending (so far suspending
meant suppressing the prompt, but inputs were still processed).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6715 c046a42c-6fe2-441c-8c8c-71466251a162
As another step towards decoupled monitor terminals encapsulate the
state of the readline processor in a separate data structure called
ReadLineState and adapt all interfaces appropriately. For now the
monitor continues to instantiate just a single readline state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6714 c046a42c-6fe2-441c-8c8c-71466251a162
There is no use for the hide/show banner option, and it is applied
inconsistently anyway (or what makes the difference between
-serial mon:stdio and -nographic for the monitor?). So drop this mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6713 c046a42c-6fe2-441c-8c8c-71466251a162
Remove the static MAX_MON limit by managing monitor terminals in a
linked list.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6712 c046a42c-6fe2-441c-8c8c-71466251a162
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
Currently, waiting for the user to type in some password blocks the
whole VM because monitor_readline starts its own I/O loop. And this loop
also screws up reading passwords from virtual console.
Patch below fixes the shortcomings by using normal I/O processing also
for waiting on a password. To keep to modal property for the monitor
terminal, the command handler is temporarily replaced by a password
handler and a callback infrastructure is established to process the
result before switching back to command mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
Break readline_show_prompt out of readline_start so that (re-)printing
the prompt can be controlled in a more fine-grained way.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6709 c046a42c-6fe2-441c-8c8c-71466251a162
Drop the hack to query passwords on all monitor terminals now that they
are requested when the user initially enters 'continue'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6708 c046a42c-6fe2-441c-8c8c-71466251a162
