Use a pointer to the bucket instead of repeating cfg->buckets[i] all
the time. This makes the code more concise and will help us expand the
checks later and save a few line breaks.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 763ffc40a26b17d54cf93f5a999e4656049fcf0c.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The way the throttling algorithm works is that requests start being
throttled once the bucket level exceeds the burst limit. When we get
there the bucket leaks at the level set by the user (bkt->avg), and
that leak rate is what prevents guest I/O from exceeding the desired
limit.
If we don't allow bursts (i.e. bkt->max == 0) then we can start
throttling requests immediately. The problem with keeping the
threshold at 0 is that it only allows one request at a time, and as
soon as there's a bit of I/O from the guest every other request will
be throttled and performance will suffer considerably. That can even
make the guest unable to reach the throttle limit if that limit is
high enough, and that happens regardless of the block scheduler used
by the guest.
Increasing that threshold gives flexibility to the guest, allowing it
to perform short bursts of I/O before being throttled. Increasing the
threshold too much does not make a difference in the long run (because
it's the leak rate what defines the actual throughput) but it does
allow the guest to perform longer initial bursts and exceed the
throttle limit for a short while.
A burst value of bkt->avg / 10 allows the guest to perform 100ms'
worth of I/O at the target rate without being throttled.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 31aae6645f0d1fbf3860fb2b528b757236f0c0a7.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Build time check of OFD lock is not sufficient and can cause image open
errors when the runtime environment doesn't support it.
Add a helper function to probe it at runtime, additionally. Also provide
a qemu_has_ofd_lock() for callers to check the status.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit a59629fcc6.
This is not needed anymore because the IOThread mutex is not
"magic" anymore (need not kick the CPU thread)and also because
fork callbacks are only enabled at the very beginning of
QEMU's execution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because of -daemonize, system mode QEMU sometimes needs to fork() and
keep RCU enabled in the child. However, there is a possible deadlock
with synchronize_rcu:
- the CPU thread is inside a RCU critical section and wants to take
the BQL in order to do MMIO
- the monitor thread, which is owning the BQL, calls rcu_init_lock
which tries to take the rcu_sync_lock
- the call_rcu thread has taken rcu_sync_lock in synchronize_rcu, but
synchronize_rcu needs the CPU thread to end the critical section
before returning.
This cannot happen for user-mode emulation, because it does not have
a BQL.
To fix it, assume that system mode QEMU only forks in preparation for
exec (except when daemonizing) and disable pthread_atfork as soon as
the double fork has happened.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 97f4030 changed warning messages from
timestamp-if-enabled progname ":" location "warning: " message
to
"warning: " timestamp-if-enabled progname ":" location message
This regressed qemu-iotests 051. Put "warning: " right back where it
was, along with "info: ".
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1500449614-16811-1-git-send-email-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Clang 3.9 passes the CONFIG_AVX2_OPT configure test. However, the
supplied <cpuid.h> does not contain the bit_AVX2 define that we use
when detecting whether the routine can be enabled.
Introduce a qemu-specific header that uses the compiler's definition
of __cpuid et al, but supplies any missing bit_* definitions needed.
This avoids introducing any extra ifdefs to util/bufferiszero.c, and
allows quite a few to be removed from tcg/i386/tcg-target.inc.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170719044018.18063-1-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On NetBSD the compiler warns:
util/oslib-posix.c: In function 'sigaction_invoke':
util/oslib-posix.c:589:5: warning: missing braces around initializer [-Wmissing-braces]
siginfo_t si = { 0 };
^
util/oslib-posix.c:589:5: warning: (near initialization for 'si.si_pad') [-Wmissing-braces]
because on this platform siginfo_t is defined as
typedef union siginfo {
char si_pad[128]; /* Total size; for future expansion */
struct _ksiginfo _info;
} siginfo_t;
Avoid this warning by initializing the struct with {} instead;
this is a GCC extension but we use it all over the codebase already.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1500568341-8389-1-git-send-email-peter.maydell@linaro.org
This include was forgotten when splitting cacheinfo.c out of
tcg/ppc/tcg-target.inc.c (see commit b255b2c8).
For a Centos7 host, the include path
<signal.h>
<bits/sigcontext.h>
<asm/sigcontext.h>
<asm/elf.h>
<asm/auxvec.h>
implicitly pulls in the desired AT_* defines.
Not so for Debian Jessie.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170711015524.22936-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
throttle_config() cancels the timers of the calling BlockBackend. This
doesn't make sense because other BlockBackends in the group remain
untouched. There's no need to cancel the timers in the one specific
BlockBackend so let's not do that. Throttled requests will run as
scheduled and future requests will follow the new configuration. This
also allows a throttle group's configuration to be changed even when it
has no members.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clock type in throttling is currently inferred by the ThrottleTimer's
clock type even though it is a per-ThrottleGroup property; it doesn't
make sense to have different clock types in the same group. Moving this
to a field in ThrottleGroup can simplify some of the throttle functions.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions are more efficient in the presence of contention.
qemu_co_rwlock_downgrade also guarantees not to block, which may
be useful in some algorithms too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170629132749.997-3-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently if you disable listening on IPv4 addresses, via the
CLI flag ipv4=off, we still mistakenly accept IPv4 clients via
the IPv6 listener socket due to IPV6_V6ONLY flag being unset.
We must ensure IPV6_V6ONLY is always set if ipv4=off
This fixes the following scenarios
-incoming tcp::9000,ipv6=on
-incoming tcp:[::]:9000,ipv6=on
-chardev socket,id=cdev0,host=,port=9000,server,nowait,ipv4=off
-chardev socket,id=cdev0,host=,port=9000,server,nowait,ipv6=on
-chardev socket,id=cdev0,host=::,port=9000,server,nowait,ipv4=off
-chardev socket,id=cdev0,host=::,port=9000,server,nowait,ipv6=on
which all mistakenly accepted IPv4 clients
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When inet_parse() parses the hostname, it is forcing the
has_ipv6 && ipv6 flags if the address contains a ":". This
means that if the user had set the ipv4=on flag, to try to
restrict the listener to just ipv4, an error would not have
been raised. eg
-incoming tcp:[::]:9000,ipv4
should have raised an error because listening for IPv4
on "::" is a non-sensical combination. With this removed,
we now call getaddrinfo() on "::" passing PF_INET and
so getaddrinfo reports an error about the hostname being
incompatible with the requested protocol:
qemu-system-x86_64: -incoming tcp:[::]:9000,ipv4: address resolution
failed for :::9000: Address family for hostname not supported
Likewise it is explicitly setting the has_ipv4 & ipv4
flags when the address contains only digits + '.'. This
has no ill-effect, but also has no benefit, so is removed.
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When binding to an IPv6 socket we currently force the
IPV6_V6ONLY flag to off. This means that the IPv6 socket
will accept both IPv4 & IPv6 sockets when QEMU is launched
with something like
-vnc :::1
While this is good for that case, it is bad for other
cases. For example if an empty hostname is given,
getaddrinfo resolves it to 2 addresses 0.0.0.0 and ::,
in that order. We will thus bind to 0.0.0.0 first, and
then fail to bind to :: on the same port. The same
problem can happen if any other hostname lookup causes
the IPv4 address to be reported before the IPv6 address.
When we get an IPv6 bind failure, we should re-try the
same port, but with IPV6_V6ONLY turned on again, to
avoid clash with any IPv4 listener.
This ensures that
-vnc :1
will bind successfully to both 0.0.0.0 and ::, and also
avoid
-vnc :1,to=2
from mistakenly using a 2nd port for the :: listener.
This is a regression due to commit 396f935 "ui: add ability to
specify multiple VNC listen addresses".
Acked-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement warn_report_err() and warn_reportf_err() functions which
are the same as the error_report_err() and error_reportf_err()
functions except report a warning instead of an error.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <276ff93eadc0b01b8243cc61ffc331f77922c0d0.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add warn_report(), warn_vreport() for reporting warnings, and
info_report(), info_vreport() for informational messages.
These are implemented them with a helper function factored out of
error_vreport(), suitably generalized. This patch makes no changes
to the output of the original error_report() function.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <c89e9980019f296ec9aa38d7689ac4d5c369296d.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename the error_print_loc() function in preparation for using it to
print warnings as well.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <661b215695db878a0aef8401b506fb3da50e981a.1499866456.git.alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add bdrv_dirty_bitmap_deserialize_ones() function, which is needed for
qcow2 bitmap loading, to handle unallocated bitmap parts, marked as
all-ones.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make dirty iter resistant to resetting bits in corresponding HBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clang generates the following warning on aarch64 host:
CC util/cacheinfo.o
/home/pranith/qemu/util/cacheinfo.c:121:48: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
asm volatile("mrs\t%0, ctr_el0" : "=r"(ctr));
^
/home/pranith/qemu/util/cacheinfo.c:121:28: note: use constraint modifier "w"
asm volatile("mrs\t%0, ctr_el0" : "=r"(ctr));
^~
%w0
Constraint modifier 'w' is not (yet?) accepted by gcc. Fix this by increasing the ctr size.
Tested-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20170630153946.11997-1-bobby.prani@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Not all platforms check whether a lock is initialized before used. In
particular Linux seems to be more permissive than OSX.
Check initialization state explicitly in our code to catch such bugs
earlier.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170704122325.25634-1-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The original ready < nhandles - 1 can be re-written as ready + 1 <
nhandles. The check was actually incorrect because
WAIT_OBJECT_0 was not subtracted from ready; it worked because
WAIT_OBJECT_0 is zero. After subtracting WAIT_OBJECT_0,
the result is the same condition that we are checking on the first
itteration of the for loop. This means we can remove the if statement
and let the for loop check the code.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <a14083d681951f3999a0e9314605cb706381ae8d.1498756113.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'sun_path' field in the sockaddr_un struct is not required
to be NUL termianted, so when reporting an error, we must use
the separate 'path' variable which is guaranteed terminated.
Fixes a bug spotted by coverity that was introduced in
commit ad9579aaa1
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu May 25 16:53:00 2017 +0100
sockets: improve error reporting if UNIX socket path is too long
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170626103756.22974-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O9Vv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' into staging
QAPI patches for 2017-06-09
# gpg: Signature made Tue 20 Jun 2017 13:31:39 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits)
tests/qdict: check more get_try_int() cases
console: use get_uint() for "head" property
i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties
numa: use get_uint() for "size" property
pnv-core: use get_uint() for "core-pir" property
pvpanic: use get_uint() for "ioport" property
auxbus: use get_uint() for "addr" property
arm: use get_uint() for "mp-affinity" property
xen: use get_uint() for "max-ram-below-4g" property
pc: use get_uint() for "hpet-intcap" property
pc: use get_uint() for "apic-id" property
pc: use get_uint() for "iobase" property
acpi: use get_uint() for "pci-hole*" properties
acpi: use get_uint() for various acpi properties
acpi: use get_uint() for "acpi-pcihp-io*" properties
platform-bus: use get_uint() for "addr" property
bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base"
aspeed: use {set, get}_uint() for "ram-size" property
pcihp: use get_uint() for "bsel" property
pc-dimm: make "size" property uint64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add helpers to gather cache info from the host at init-time.
For now, only export the host's I/D cache line sizes, which we
will use to improve cache locality to avoid false sharing.
Suggested-by: Richard Henderson <rth@twiddle.net>
Suggested-by: Geert Martin Ijewski <gm.ijewski@web.de>
Tested-by: Geert Martin Ijewski <gm.ijewski@web.de>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1496794624-4083-1-git-send-email-cota@braap.org>
[rth: Move all implementations from tcg/ppc/]
Signed-off-by: Richard Henderson <rth@twiddle.net>
This module provides fast paths for 64-bit atomic operations on machines
that only have 32-bit atomic access.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170605123908.18777-11-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The 'struct sockaddr_un' only allows 108 bytes for the socket
path.
If the user supplies a path, QEMU uses snprintf() to silently
truncate it when too long. This is undesirable because the user
will then be unable to connect to the path they asked for.
If the user doesn't supply a path, QEMU builds one based on
TMPDIR, but if that leads to an overlong path, it mistakenly
uses error_setg_errno() with a stale errno value, because
snprintf() does not set errno on truncation.
In solving this the code needed some refactoring to ensure we
don't pass 'un.sun_path' directly to any APIs which expect
NUL-terminated strings, because the path is not required to
be terminated.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170525155300.22743-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Submission of requests on linux aio is a bit tricky and can lead to
requests completions on submission path:
44713c9e85 ("linux-aio: Handle io_submit() failure gracefully")
0ed93d84ed ("linux-aio: process completions from ioq_submit()")
That means that any coroutine which has been yielded in order to wait
for completion can be resumed from submission path and be eventually
terminated (freed).
The following use-after-free crash was observed when IO throttling
was enabled:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f5813dff700 (LWP 56417)]
virtqueue_unmap_sg (elem=0x7f5804009a30, len=1, vq=<optimized out>) at virtio.c:252
(gdb) bt
#0 virtqueue_unmap_sg (elem=0x7f5804009a30, len=1, vq=<optimized out>) at virtio.c:252
^^^^^^^^^^^^^^
remember the address
#1 virtqueue_fill (vq=0x5598b20d21b0, elem=0x7f5804009a30, len=1, idx=0) at virtio.c:282
#2 virtqueue_push (vq=0x5598b20d21b0, elem=elem@entry=0x7f5804009a30, len=<optimized out>) at virtio.c:308
#3 virtio_blk_req_complete (req=req@entry=0x7f5804009a30, status=status@entry=0 '\000') at virtio-blk.c:61
#4 virtio_blk_rw_complete (opaque=<optimized out>, ret=0) at virtio-blk.c:126
#5 blk_aio_complete (acb=0x7f58040068d0) at block-backend.c:923
#6 coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at coroutine-ucontext.c:78
(gdb) p * elem
$8 = {index = 77, out_num = 2, in_num = 1,
in_addr = 0x7f5804009ad8, out_addr = 0x7f5804009ae0,
in_sg = 0x0, out_sg = 0x7f5804009a50}
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
'in_sg' and 'out_sg' are invalid.
e.g. it is impossible that 'in_sg' is zero,
instead its value must be equal to:
(gdb) p/x 0x7f5804009ad8 + sizeof(elem->in_addr[0]) + 2 * sizeof(elem->out_addr[0])
$26 = 0x7f5804009af0
Seems 'elem' was corrupted. Meanwhile another thread raised an abort:
Thread 12 (Thread 0x7f57f2ffd700 (LWP 56426)):
#0 raise () from /lib/x86_64-linux-gnu/libc.so.6
#1 abort () from /lib/x86_64-linux-gnu/libc.so.6
#2 qemu_coroutine_enter (co=0x7f5804009af0) at qemu-coroutine.c:113
#3 qemu_co_queue_run_restart (co=0x7f5804009a30) at qemu-coroutine-lock.c:60
#4 qemu_coroutine_enter (co=0x7f5804009a30) at qemu-coroutine.c:119
^^^^^^^^^^^^^^^^^^
WTF?? this is equal to elem from crashed thread
#5 qemu_co_queue_run_restart (co=0x7f57e7f16ae0) at qemu-coroutine-lock.c:60
#6 qemu_coroutine_enter (co=0x7f57e7f16ae0) at qemu-coroutine.c:119
#7 qemu_co_queue_run_restart (co=0x7f5807e112a0) at qemu-coroutine-lock.c:60
#8 qemu_coroutine_enter (co=0x7f5807e112a0) at qemu-coroutine.c:119
#9 qemu_co_queue_run_restart (co=0x7f5807f17820) at qemu-coroutine-lock.c:60
#10 qemu_coroutine_enter (co=0x7f5807f17820) at qemu-coroutine.c:119
#11 qemu_co_queue_run_restart (co=0x7f57e7f18e10) at qemu-coroutine-lock.c:60
#12 qemu_coroutine_enter (co=0x7f57e7f18e10) at qemu-coroutine.c:119
#13 qemu_co_enter_next (queue=queue@entry=0x5598b1e742d0) at qemu-coroutine-lock.c:106
#14 timer_cb (blk=0x5598b1e74280, is_write=<optimized out>) at throttle-groups.c:419
Crash can be explained by access of 'co' object from the loop inside
qemu_co_queue_run_restart():
while ((next = QSIMPLEQ_FIRST(&co->co_queue_wakeup))) {
QSIMPLEQ_REMOVE_HEAD(&co->co_queue_wakeup, co_queue_next);
^^^^^^^^^^^^^^^^^^^^
on each iteration 'co' is accessed,
but 'co' can be already freed
qemu_coroutine_enter(next);
}
When 'next' coroutine is resumed (entered) it can in its turn resume
'co', and eventually free it. That's why we see 'co' (which was freed)
has the same address as 'elem' from the first backtrace.
The fix is obvious: use temporary queue and do not touch coroutine after
first qemu_coroutine_enter() is invoked.
The issue is quite rare and happens every ~12 hours on very high IO
and CPU load (building linux kernel with -j512 inside guest) when IO
throttling is enabled. With the fix applied guest is running ~35 hours
and is still alive so far.
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170601160847.23720-1-roman.penyaev@profitbricks.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Assert that the return value is not an error. This issue was found by
Coverity.
CID: 1374831
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
CC: groug@kaod.org
CC: pbonzini@redhat.com
CC: Eric Blake <eblake@redhat.com>
Message-Id: <1494356693-13190-2-git-send-email-sstabellini@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Those are apparently unnecessary includes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
mapped-file security mode (especially for the virtfs root).
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAlktdVYACgkQAvw66wEB28LaTgCfS/bunOy4Wp+I+DO/Gx/5bfNp
7/IAn3qfJYBqRnpfz8KNKRZJ8QG/Bu5X
=KTTf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
Various bugfixes and code cleanups. Most notably, it fixes metadata handling in
mapped-file security mode (especially for the virtfs root).
# gpg: Signature made Tue 30 May 2017 14:36:22 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: local: metadata file for the VirtFS root
9pfs: local: simplify file opening
9pfs: local: resolve special directories in paths
9pfs: check return value of v9fs_co_name_to_path()
util: drop old utimensat() compat code
9pfs: assume utimensat() and futimens() are present
fsdev: fix virtfs-proxy-helper cwd
9pfs: local: fix unlink of alien files in mapped-file mode
9pfs: drop pdu_push_and_notify()
fsdev: don't allow unknown format in marshal/unmarshal
virtio-9p/xen-9p: move 9p specific bits to core 9p code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alternates are sum types like unions, but use the JSON type on the
wire / QType in QObject instead of an explicit tag. That's why we
require alternate members to have distinct QTypes.
The recently introduced keyval_parse() (commit d454dbe) can only
produce string scalars. The qobject_input_visitor_new_keyval() input
visitor mostly hides the difference, so code using a QObject input
visitor doesn't have to care whether its input was parsed from JSON or
KEY=VALUE,... The difference leaks for alternates, as noted in commit
0ee9ae7: a non-string, non-enum scalar alternate value can't currently
be expressed.
In part, this is just our insufficiently sophisticated implementation.
Consider alternate type 'GuestFileWhence'. It has an integer member
and a 'QGASeek' member. The latter is an enumeration with values
'set', 'cur', 'end'. The meaning of b=set, b=cur, b=end, b=0, b=1 and
so forth is perfectly obvious. However, our current implementation
falls apart at run time for b=0, b=1, and so forth. Fixable, but not
today; add a test case and a TODO comment.
Now consider an alternate type with a string and an integer member.
What's the meaning of a=42? Is it the string "42" or the integer 42?
Whichever meaning you pick makes the other inexpressible. This isn't
just an implementation problem, it's fundamental. Our current
implementation will pick string.
So far, we haven't needed such alternates. To make sure we stop and
think before we add one that cannot sanely work with keyval_parse(),
let's require alternate members to have sufficiently distinct
representation in KEY=VALUE,... syntax:
* A string member clashes with any other scalar member
* An enumeration member clashes with bool members when it has value
'on' or 'off'.
* An enumeration member clashes with numeric members when it has a
value that starts with '-', '+', or a decimal digit. This is a
rather lazy approximation of the actual number syntax accepted by
the visitor.
Note that enumeration values starting with '-' and '+' are rejected
elsewhere already, but better safe than sorry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1495471335-23707-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now that 9pfs and virtfs-proxy-helper have been converted to utimensat(),
we don't need to keep qemu_utimens() anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
socket_address_flatten() leaks a SocketAddress when its argument is
null. Happens when opening a ChardevBackend of type 'udp' that is
configured without a local address. Screwed up in commit bd269ebc due
to last minute semantic conflict resolution. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1494866344-11013-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Moving the algorithm from print_type_size() into size_to_str() so that
other component can also leverage it. With that, refactor
print_type_size().
The assert() in that logic is removed though, since even UINT64_MAX
would not overflow.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-3-git-send-email-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The GThread implementation is not functional enough to actually
run QEMU reliably. While it was potentially useful for debugging,
we have a scripts/qemugdb/coroutine.py to enable tracing of
ucontext coroutines in GDB, so that removes the only reason for
GThread to exist.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
They are wrappers of POSIX fcntl "file private locking", with a
convenient "try lock" wrapper implemented with F_OFD_GETLK.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
inet_parse() returns a newly allocated InetSocketAddress. Lift the
allocation from inet_parse() into its caller socket_parse() to prepare
for flattening SocketAddress.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Straightforward rebase]
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
vsock_parse() returns a newly allocated VsockSocketAddress. Lift the
allocation from vsock_parse() into its caller socket_parse() to
prepare for flattening SocketAddress.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Noticed while investigating Coccinelle cleanups. There is no need
for a temporary variable when we can use the new macro to do the
same thing with less typing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-9-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
but it'll come in the next pull request.
* use GDB XML register description for x86
* use _Static_assert in QEMU_BUILD_BUG_ON
* add "R:" to MAINTAINERS and get_maintainers
* checkpatch improvements
* dump threading fixes
* first part of vhost-user-scsi support
* QemuMutex tracing
* vmw_pvscsi and megasas fixes
* sgabios module update
* use Rev3 (ACPI 2.0) FADT
* deprecate -hdachs
* improve -accel documentation
* hax fix
* qemu-char GSource bugfix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJZDE+gAAoJEL/70l94x66DIpYH/1IOz3u8ObD8D4Lor07LkCCZ
vWFnTBMgGi9gTL5JQDnukRR3cmNp9EVOtAP5Yf+v+/Xqyq/FNGnoVWxCxEby7LtN
zrIXbsKMCaEcGzRNJFcbKV+KZnzkJrz92J0NHy29ruCK1AsslOXAWf4Qb1MV+fQl
6w2Upsh35usvWCNpFm2o8arzMEmNuE2xJDPKUB11GMrZT6TExq4Zqa8Zj1Ihc0sX
XcDr+eeBmb65Vv3jQLntOhSWAy0Xxf/fDXYTQx+JLHFgvpSOIWMiS+fqIVXtT0bH
0E4hQrBr0qjes8n8+9WGGQW2k8Ak0QlDvrZnQ97hTeV1k6SxW+2ATO2mLeJp9TM=
=5hf2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'bonzini/tags/for-upstream' into staging
A large set of small patches. I have not included yet vhost-user-scsi,
but it'll come in the next pull request.
* use GDB XML register description for x86
* use _Static_assert in QEMU_BUILD_BUG_ON
* add "R:" to MAINTAINERS and get_maintainers
* checkpatch improvements
* dump threading fixes
* first part of vhost-user-scsi support
* QemuMutex tracing
* vmw_pvscsi and megasas fixes
* sgabios module update
* use Rev3 (ACPI 2.0) FADT
* deprecate -hdachs
* improve -accel documentation
* hax fix
* qemu-char GSource bugfix
# gpg: Signature made Fri 05 May 2017 06:10:40 AM EDT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* bonzini/tags/for-upstream: (21 commits)
vhost-scsi: create a vhost-scsi-common abstraction
libvhost-user: replace vasprintf() to fix build
get_maintainer: add subsystem to reviewer output
get_maintainer: --r (list reviewer) is on by default
get_maintainer: it's '--pattern-depth', not '-pattern-depth'
get_maintainer: Teach get_maintainer.pl about the new "R:" tag
MAINTAINERS: Add "R:" tag for self-appointed reviewers
Fix the -accel parameter and the documentation for 'hax'
dump: Acquire BQL around vm_start() in dump thread
hax: Fix memory mapping de-duplication logic
checkpatch: Disallow glib asserts in main code
trace: add qemu mutex lock and unlock trace events
vmw_pvscsi: check message ring page count at initialisation
sgabios: update for "fix wrong video attrs for int 10h,ah==13h"
scsi: avoid an off-by-one error in megasas_mmio_write
vl: deprecate the "-hdachs" option
use _Static_assert in QEMU_BUILD_BUG_ON
target/i386: Add GDB XML register description support
char: Fix removing wrong GSource that be found by fd_in_tag
hw/i386: Build-time assertion on pc/q35 reset register being identical.
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change malloc/strdup/free to g_malloc/g_strdup/g_free in
util/envlist.c.
Remove NULL checks for pointers returned from g_malloc and g_strdup
as they exit in case of failure. Also, update calls to envlist_create
to reflect this.
Free array and array contents returned by envlist_to_environ using
g_free in bsd-user/main.c and linux-user/main.c.
Update comments to reflect change in semantics.
Signed-off-by: Saurav Sachidanand <sauravsachidanand@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- LOADPARM machine property, exposed to the guest via SCLP and
diagnose 308
- Use LOADPARM in the s390-ccw bios to select a boot entry
- Fix a crash in the ipl device code when a virtio-scsi-pci device
has been specified
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fFQl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'cohuck/tags/s390x-20170502' into staging
More s390x patches, this time boot related:
- LOADPARM machine property, exposed to the guest via SCLP and
diagnose 308
- Use LOADPARM in the s390-ccw bios to select a boot entry
- Fix a crash in the ipl device code when a virtio-scsi-pci device
has been specified
# gpg: Signature made Tue 02 May 2017 02:29:26 PM BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* cohuck/tags/s390x-20170502:
hw/s390x/ipl: Fix crash with virtio-scsi-pci device
pc-bios/s390-ccw.img: update image
pc-bios/s390-ccw: add boot entry selection to El Torito routine
pc-bios/s390-ccw: add boot entry selection for ECKD DASD
pc-bios/s390-ccw: provide entry selection on LOADPARM for SCSI disk
pc-bios/s390-ccw: provide a function to interpret LOADPARM value
pc-bios/s390-ccw: get LOADPARM stored in SCP Read Info
pc-bios/s390-ccw: Make ebcdic/ascii conversion public
util/qemu-config: Add loadparm to qemu machine_opts
hw/s390x/sclp: update LOADPARM in SCP Info
hw/s390x/ipl: enable LOADPARM in IPIB for a boot device
hw/s390x: provide loadparm property for the machine
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These trace events were very useful to help me to understand and find a
reordering issue in vfio, for example:
qemu_mutex_lock locked mutex 0x10905ad8
vfio_region_write (0001:03:00.0:region1+0xc0, 0x2020c, 4)
qemu_mutex_unlock unlocked mutex 0x10905ad8
qemu_mutex_lock locked mutex 0x10905ad8
vfio_region_write (0001:03:00.0:region1+0xc4, 0xa0000, 4)
qemu_mutex_unlock unlocked mutex 0x10905ad8
that also helped me to see the desired result after the fix:
qemu_mutex_lock locked mutex 0x10905ad8
vfio_region_write (0001:03:00.0:region1+0xc0, 0x2000c, 4)
vfio_region_write (0001:03:00.0:region1+0xc4, 0xb0000, 4)
qemu_mutex_unlock unlocked mutex 0x10905ad8
So it could be a good idea to have these traces implemented. It's worth
mentioning that they should be surgically enabled during the debugging,
otherwise it can flood the trace logs with lock/unlock messages.
How to use it:
trace-event qemu_mutex_lock on|off
trace-event qemu_mutex_unlock on|off
or
trace-event qemu_mutex* on|off
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Message-Id: <1493054398-26013-1-git-send-email-joserz@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
[Also handle trylock, cond_wait and win32; trace "unlocked" while still
in the critical section, so that "unlocked" always comes before the
next "locked" tracepoint. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add S390CcwMachineState machine parameter "loadparm" to qemu machine_opts so
libvirt can query for it.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently we only print progress information on retrieval of SIGUSR1.
Some systems have a dedicated SIGINFO for this, however, so it should be
handled appropriately if it is available.
Buglink: https://bugs.launchpad.net/qemu/+bug/1662468
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170207235757.2026-1-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20170413160952.29918-1-mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Throttling has a weird property that throttle_get_config() does not
always return the same throttling settings that were given with
throttle_config(). In other words, the set and get functions aren't
symmetric.
If .max is 0 then the throttling code assigns a default value of .avg /
10 in throttle_config(). This is an implementation detail of the
throttling algorithm. When throttle_get_config() is called the .max
value returned should still be 0.
Users are exposed to this quirk via "info block" or "query-block"
monitor commands. This has caused confusion because it looks like a bug
when an unexpected value is reported.
This patch hides the .max value adjustment in throttle_get_config() and
updates test-throttle.c appropriately.
Reported-by: Nini Gu <ngu@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170301115026.22621-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
They start the coroutine on the specified context.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
It's a variant of qemu_coroutine_enter with an explicit AioContext
parameter.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
When running virt-rescue the serial console hangs from time to time.
Virt-rescue runs an ordinary Linux kernel "appliance", but there is
only a single idle process running inside, so the qemu main loop is
largely idle. With virt-rescue >= 1.37 you may be able to observe the
hang by doing:
$ virt-rescue -e ^] --scratch
><rescue> while true; do ls -l /usr/bin; done
The hang in virt-rescue can be resolved by pressing a key on the
serial console.
Possibly with the same root cause, we also observed hangs during very
early boot of regular Linux VMs with a serial console. Those hangs
are extremely rare, but you may be able to observe them by running
this command on baremetal for a sufficiently long time:
$ while libguestfs-test-tool -t 60 >& /tmp/log ; do echo -n . ; done
(Check in /tmp/log that the failure was caused by a hang during early
boot, and not some other reason)
During investigation of this bug, Paolo Bonzini wrote:
> glib is expecting QEMU to use g_main_context_acquire around accesses to
> GMainContext. However QEMU is not doing that, instead it is taking its
> own mutex. So we should add g_main_context_acquire and
> g_main_context_release in the two implementations of
> os_host_main_loop_wait; these should undo the effect of Frediano's
> glib patch.
This patch exactly implements Paolo's suggestion in that paragraph.
This fixes the serial console hang in my testing, across 3 different
physical machines (AMD, Intel Core i7 and Intel Xeon), over many hours
of automated testing. I wasn't able to reproduce the early boot hangs
(but as noted above, these are extremely rare in any case).
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1435432
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20170331205133.23906-1-rjones@redhat.com>
[Paolo: this is actually a glib bug: recent glib versions are also
expecting g_main_context_acquire around g_poll---but that is not
documented and probably not even intended].
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SocketAddress is a simple union, and simple unions are awkward: they
have their variant members wrapped in a "data" object on the wire, and
require additional indirections in C. I intend to limit its use to
existing external interfaces. New ones should use SocketAddressFlat.
I further intend to convert all internal interfaces to
SocketAddressFlat. This helper should go away then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-8-git-send-email-armbru@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have quite a few switches over SocketAddressKind. Some have case
labels for all enumeration values, others rely on a default label.
Some abort when the value isn't a valid SocketAddressKind, others
report an error then.
Unify as follows. Always provide case labels for all enumeration
values, to clarify intent. Abort when the value isn't a valid
SocketAddressKind, because the program state is messed up then.
Improve a few error messages while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1490895797-29094-4-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Let's set the handles to the underlying facilities to their extremal
value so no accidental misuse can happen, and to make it obvious that the
notifier is dysfunctional. E.g. if we just close an fd but do not touch
the int holding the fd eventually a read/write could succeed again when
the fd gets reused, and corrupt the file addressed by the fd.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We first snprintf() to a fixed buffer, then g_strdup() the result
*boggle*.
Worse, the size of the fixed buffer INET6_ADDRSTRLEN + 5 + 4 is bogus:
the 4 correctly accounts for '[', ']', ':' and '\0', but
INET6_ADDRSTRLEN is not a suitable limit for inet->host, and 5 is not
one for inet->port! They are for host and port in *numeric* form
(exploiting that INET6_ADDRSTRLEN > INET_ADDRSTRLEN), but inet->host
can also be a hostname, and inet->port can be a service name, to be
resolved with getaddrinfo().
Fortunately, the only user so far is the "socket" network backend's
net_socket_connected(), which uses it to initialize a NetSocketState's
info_str[]. info_str[] has considerable more space: 256 instead of
55. So the bug's impact appears to be limited to truncated "info
networks" with the "socket" network backend.
The fix is obvious: use g_strdup_printf().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1490268208-23368-1-git-send-email-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The multithreaded TCG implementation exposed deadlocks in the win32
condition variables: as implemented, qemu_cond_broadcast waited on
receivers, whereas the pthreads API it was intended to emulate does
not. This was causing a deadlock because broadcast was called while
holding the IO lock, as well as all possible waiters blocked on the
same lock.
This patch replaces all the custom synchronisation code for mutexes
and condition variables with native Windows primitives (SRWlocks and
condition variables) with the same semantics as their POSIX
equivalents. To enable that, it requires a Windows Vista or newer host
OS.
Signed-off-by: Andrey Shedel <ashedel@microsoft.com>
[AB: edited commit message]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-Id: <20170324220141.10104-1-Andrew.Baumann@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was spotted by Coverity, in case where sysconf(_SC_NPROCESSORS_ONLN)
fails and returns -1. This results in memset_num_threads getting set to -1.
Which we then pass to g_new0().
The patch replaces MAX_MEM_PREALLOC_THREAD_COUNT macro with a function call
get_memset_num_threads() to handle sysconf() failure gracefully. In case
sysconf() fails, we fall back to single threaded.
(Spotted by Coverity, CID 1372465.)
Signed-off-by: Jitendra Kolhe <jitendra.kolhe@hpe.com>
Message-Id: <1490079006-32495-1-git-send-email-jitendra.kolhe@hpe.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1490014548-15083-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1490014548-15083-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-ga's socket activation support was not obeying the LISTEN_PID
environment variable, which avoids that a process uses a socket-activation
file descriptor meant for its parent.
Mess can for example ensue if a process forks a children before consuming
the socket-activation file descriptor and therefore setting O_CLOEXEC
on it.
Luckily, qemu-nbd also got socket activation code, and its copy does
support LISTEN_PID. Some extra fixups are needed to ensure that the
code can be used for both, but that's what this patch does. The
main change is to replace get_listen_fds's "consume" argument with
the FIRST_SOCKET_ACTIVATION_FD macro from the qemu-nbd code.
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
si_band is not found in OpenBSD. It is marked as obsolescent in
POSIX, so we can delete it without any remorse.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170317152214.6148-1-pbonzini@redhat.com
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit 3c80ca15 fixed a deadlock scenarion with nested aio_poll invocations.
However, the rescheduling of the completion BH introcuded unnecessary spinning
in the main-loop. On very fast file backends this can even lead to the
"WARNING: I/O thread spun for 1000 iterations" message popping up.
Callgrind reports about 3-4% less instructions with this patch running
qemu-img bench on a ramdisk based VMDK file.
Fixes: 3c80ca158c
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using a memory-backend object with prealloc turned on, QEMU
will memset() the first byte in every memory page to zero. While
this might have been acceptable for memory backends associated
with RAM, this corrupts application data for NVDIMMs.
Instead of setting every page to zero, read the current byte
value and then just write that same value back, so we are not
corrupting the original data. Directly write the value instead
of memset()ing it, since there's no benefit to memset for a
single byte write.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Message-id: 20170303113255.28262-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
icount has become much slower after tcg_cpu_exec has stopped
using the BQL. There is also a latent bug that is masked by
the slowness.
The slowness happens because every occurrence of a QEMU_CLOCK_VIRTUAL
timer now has to wake up the I/O thread and wait for it. The rendez-vous
is mediated by the BQL QemuMutex:
- handle_icount_deadline wakes up the I/O thread with BQL taken
- the I/O thread wakes up and waits on the BQL
- the VCPU thread releases the BQL a little later
- the I/O thread raises an interrupt, which calls qemu_cpu_kick
- the VCPU thread notices the interrupt, takes the BQL to
process it and waits on it
All this back and forth is extremely expensive, causing a 6 to 8-fold
slowdown when icount is turned on.
One may think that the issue is that the VCPU thread is too dependent
on the BQL, but then the latent bug comes in. I first tried removing
the BQL completely from the x86 cpu_exec, only to see everything break.
The only way to fix it (and make everything slow again) was to add a dummy
BQL lock/unlock pair.
This is because in -icount mode you really have to process the events
before the CPU restarts executing the next instruction. Therefore, this
series moves the processing of QEMU_CLOCK_VIRTUAL timers straight in
the vCPU thread when running in icount mode.
The required changes include:
- make the timer notification callback wake up TCG's single vCPU thread
when run from another thread. By using async_run_on_cpu, the callback
can override all_cpu_threads_idle() when the CPU is halted.
- move handle_icount_deadline after qemu_tcg_wait_io_event, so that
the timer notification callback is invoked after the dummy work item
wakes up the vCPU thread
- make handle_icount_deadline run the timers instead of just waking the
I/O thread.
- stop processing the timers in the main loop
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no change for now, because the callback just invokes
qemu_notify_event.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This dependency is the wrong way, and we will need util/qemu-timer.h from
sysemu/cpus.h in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the first timer is exactly at the current value of the clock, the
deadline is met and the timer should fire. This fixes itself on the next
iteration of the loop without icount; with icount, however, execution
of instructions will stop exactly at the deadline and won't proceed.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Suramya Shah <shah.suramya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170310163948.7567-1-shah.suramya@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using "-mem-prealloc" option for a large guest leads to higher guest
start-up and migration time. This is because with "-mem-prealloc" option
qemu tries to map every guest page (create address translations), and
make sure the pages are available during runtime. virsh/libvirt by
default, seems to use "-mem-prealloc" option in case the guest is
configured to use huge pages. The patch tries to map all guest pages
simultaneously by spawning multiple threads. Currently limiting the
change to QEMU library functions on POSIX compliant host only, as we are
not sure if the problem exists on win32. Below are some stats with
"-mem-prealloc" option for guest configured to use huge pages.
------------------------------------------------------------------------
Idle Guest | Start-up time | Migration time
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - single threaded (existing code)
------------------------------------------------------------------------
64 Core - 4TB | 54m11.796s | 75m43.843s
64 Core - 1TB | 8m56.576s | 14m29.049s
64 Core - 256GB | 2m11.245s | 3m26.598s
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 8 threads
------------------------------------------------------------------------
64 Core - 4TB | 5m1.027s | 34m10.565s
64 Core - 1TB | 1m10.366s | 8m28.188s
64 Core - 256GB | 0m19.040s | 2m10.148s
-----------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 16 threads
-----------------------------------------------------------------------
64 Core - 4TB | 1m58.970s | 31m43.400s
64 Core - 1TB | 0m39.885s | 7m55.289s
64 Core - 256GB | 0m11.960s | 2m0.135s
-----------------------------------------------------------------------
Changed in v2:
- modify number of memset threads spawned to min(smp_cpus, 16).
- removed 64GB memory restriction for spawning memset threads.
Changed in v3:
- limit number of threads spawned based on
min(sysconf(_SC_NPROCESSORS_ONLN), 16, smp_cpus)
- implement memset thread specific siglongjmp in SIGBUS signal_handler.
Changed in v4
- remove sigsetjmp/siglongjmp and SIGBUS unblock/block for main thread
as main thread no longer touches any pages.
- simplify code my returning memset_thread_failed status from
touch_all_pages.
Signed-off-by: Jitendra Kolhe <jitendra.kolhe@hpe.com>
Message-Id: <1487907103-32350-1-git-send-email-jitendra.kolhe@hpe.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Additionally permit non-negative integers as key components. A
dictionary's keys must either be all integers or none. If all keys
are integers, convert the dictionary to a list. The set of keys must
be [0,N].
Examples:
* list.1=goner,list.0=null,list.1=eins,list.2=zwei
is equivalent to JSON [ "null", "eins", "zwei" ]
* a.b.c=1,a.b.0=2
is inconsistent: a.b.c clashes with a.b.0
* list.0=null,list.2=eins,list.2=zwei
has a hole: list.1 is missing
Similar design flaw as for objects: there is no way to denote an empty
list. While interpreting "key absent" as empty list seems natural
(removing a list member from the input string works when there are
multiple ones, so why not when there's just one), it doesn't work:
"key absent" already means "optional list absent", which isn't the
same as "empty list present".
Update the keyval object visitor to use this a.0 syntax in error
messages rather than the usual a[0].
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488317230-26248-25-git-send-email-armbru@redhat.com>
[Off-by-one fix squashed in, as per Kevin's review]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Until now, key components are separated by '.'. This leaves little
room for evolving the syntax, and is incompatible with the __RFQDN_
prefix convention for downstream extensions.
Since key components will be commonly used as QAPI member names by the
QObject input visitor, we can just as well borrow the QAPI naming
rules here: letters, digits, hyphen and period starting with a letter,
with an optional __RFQDN_ prefix for downstream extensions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-20-git-send-email-armbru@redhat.com>
keyval_parse() parses KEY=VALUE,... into a QDict. Works like
qemu_opts_parse(), except:
* Returns a QDict instead of a QemuOpts (d'oh).
* Supports nesting, unlike QemuOpts: a KEY is split into key
fragments at '.' (dotted key convention; the block layer does
something similar on top of QemuOpts). The key fragments are QDict
keys, and the last one's value is updated to VALUE.
* Each key fragment may be up to 127 bytes long. qemu_opts_parse()
limits the entire key to 127 bytes.
* Overlong key fragments are rejected. qemu_opts_parse() silently
truncates them.
* Empty key fragments are rejected. qemu_opts_parse() happily
accepts empty keys.
* It does not store the returned value. qemu_opts_parse() stores it
in the QemuOptsList.
* It does not treat parameter "id" specially. qemu_opts_parse()
ignores all but the first "id", and fails when its value isn't
id_wellformed(), or duplicate (a QemuOpts with the same ID is
already stored). It also screws up when a value contains ",id=".
* Implied value is not supported. qemu_opts_parse() desugars "foo" to
"foo=on", and "nofoo" to "foo=off".
* An implied key's value can't be empty, and can't contain ','.
I intend to grow this into a saner replacement for QemuOpts. It'll
take time, though.
Note: keyval_parse() provides no way to do lists, and its key syntax
is incompatible with the __RFQDN_ prefix convention for downstream
extensions, because it blindly splits at '.', even in __RFQDN_. Both
issues will be addressed later in the series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488317230-26248-4-git-send-email-armbru@redhat.com>
This will probably be my last pull request before the hard freeze. It
has some new work, but that has all been posted in draft before the
soft freeze, so I think it's reasonable to include in qemu-2.9.
This batch has:
* A substantial amount of POWER9 work
* Implements the legacy (hash) MMU for POWER9
* Some more preliminaries for implementing the POWER9 radix
MMU
* POWER9 has_work
* Basic POWER9 compatibility mode handling
* Removal of some premature tests
* Some cleanups and fixes to the existing MMU code to make the
POWER9 work simpler
* A bugfix for TCG multiply adds on power
* Allow pseries guests to access PCIe extended config space
This also includes a code-motion not strictly in ppc code - moving
getrampagesize() from ppc code to exec.c. This will make some future
VFIO improvements easier, Paolo said it was ok to merge via my tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PcNw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170303' into staging
ppc patch queuye for 2017-03-03
This will probably be my last pull request before the hard freeze. It
has some new work, but that has all been posted in draft before the
soft freeze, so I think it's reasonable to include in qemu-2.9.
This batch has:
* A substantial amount of POWER9 work
* Implements the legacy (hash) MMU for POWER9
* Some more preliminaries for implementing the POWER9 radix
MMU
* POWER9 has_work
* Basic POWER9 compatibility mode handling
* Removal of some premature tests
* Some cleanups and fixes to the existing MMU code to make the
POWER9 work simpler
* A bugfix for TCG multiply adds on power
* Allow pseries guests to access PCIe extended config space
This also includes a code-motion not strictly in ppc code - moving
getrampagesize() from ppc code to exec.c. This will make some future
VFIO improvements easier, Paolo said it was ok to merge via my tree.
# gpg: Signature made Fri 03 Mar 2017 03:20:36 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170303:
target/ppc: rewrite f[n]m[add,sub] using float64_muladd
spapr: Small cleanup of PPC MMU enums
spapr_pci: Advertise access to PCIe extended config space
target/ppc: Rework hash mmu page fault code and add defines for clarity
target/ppc: Move no-execute and guarded page checking into new function
target/ppc: Add execute permission checking to access authority check
target/ppc: Add Instruction Authority Mask Register Check
hw/ppc/spapr: Add POWER9 to pseries cpu models
target/ppc/POWER9: Add cpu_has_work function for POWER9
target/ppc/POWER9: Add POWER9 pa-features definition
target/ppc/POWER9: Add POWER9 mmu fault handler
target/ppc: Don't gen an SDR1 on POWER9 and rework register creation
target/ppc: Add patb_entry to sPAPRMachineState
target/ppc/POWER9: Add POWERPC_MMU_V3 bit
powernv: Don't test POWER9 CPU yet
exec, kvm, target-ppc: Move getrampagesize() to common code
target/ppc: Add POWER9/ISAv3.00 to compat_table
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cast is there because sigbus_handler is invoked via sigfd_handler.
But it feels just wrong to use struct qemu_signalfd_siginfo in the
prototype of a function that is passed to sigaction.
Instead, do a simple-minded conversion of qemu_signalfd_siginfo to
siginfo_t.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
getrampagesize() returns the largest supported page size and mainly
used to know if huge pages are enabled.
However is implemented in target-ppc/kvm.c and not available
in TCG or other architectures.
This renames and moves gethugepagesize() to mmap-alloc.c where
fd-based analog of it is already implemented. This renames and moves
getrampagesize() to exec.c as it seems to be the common place for
helpers like this.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Similarly to allocation, do it from an inline function. This allows
tests to only use the headers for allocation/free of timer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 75cdcd1 neglected to update tests/qemu-iotests/049.out, and
made the error message for negative size worse. Fix that.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
parse_option_size()'s checking for overflow and trailing crap is
wrong. Has always been that way. qemu_strtosz() gets it right, so
use that.
This adds support for size suffixes 'P', 'E', and ignores case for all
suffixes, not just 'k'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-25-git-send-email-armbru@redhat.com>
This will permit its use in parse_option_size().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
This makes qemu_strtosz(), qemu_strtosz_mebi() and
qemu_strtosz_metric() similar to qemu_strtoi64(), except negative
values are rejected.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
Change the qemu_strtosz() & friends to return -EINVAL when @endptr is
null and the conversion doesn't consume the string completely.
Matches how qemu_strtol() & friends work.
Only test_qemu_strtosz_simple() passes a null @endptr. No functional
change there, because its conversion consumes the string.
Simplify callers that use @endptr only to fail when it doesn't point
to '\0' to pass a null @endptr instead.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-22-git-send-email-armbru@redhat.com>
Writing QEMU_STRTOSZ_DEFSUFFIX_* instead of '*' gains nothing. Get
rid of these eyesores.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1487708048-2131-18-git-send-email-armbru@redhat.com>
Most callers of qemu_strtosz_suffix() pass QEMU_STRTOSZ_DEFSUFFIX_B.
Capture the pattern in new qemu_strtosz().
Inline qemu_strtosz_suffix() into its only remaining caller.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-17-git-send-email-armbru@redhat.com>
With qemu_strtosz(), no suffix means mebibytes. It's used rarely.
I'm going to add a similar function where no suffix means bytes.
Rename qemu_strtosz() to qemu_strtosz_MiB() to make the name
qemu_strtosz() available for the new function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-16-git-send-email-armbru@redhat.com>
To parse numbers with metric suffixes, we use
qemu_strtosz_suffix_unit(nptr, &eptr, QEMU_STRTOSZ_DEFSUFFIX_B, 1000)
Capture this in a new function for legibility:
qemu_strtosz_metric(nptr, &eptr)
Replace test_qemu_strtosz_suffix_unit() by test_qemu_strtosz_metric().
Rename qemu_strtosz_suffix_unit() to do_strtosz() and give it internal
linkage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-15-git-send-email-armbru@redhat.com>
parse_option_number() fails to check for these errors after
strtoull(). Has always been broken. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-10-git-send-email-armbru@redhat.com>
Reorder check_strtox_error() to make it obvious that we always store
through a non-null @endptr.
Transform
if (some error) {
error case ...
err = value for error case;
} else {
normal case ...
err = value for normal case;
}
return err;
to
if (some error) {
error case ...
return value for error case;
}
normal case ...
return value for normal case;
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-9-git-send-email-armbru@redhat.com>
Name same things the same, different things differently.
* qemu_strtol()'s parameter @nptr is called @p in
check_strtox_error(). Rename the latter.
* qemu_strtol()'s parameter @endptr is called @next in
check_strtox_error(). Rename the latter.
* qemu_strtol()'s variable @p is called @endptr in
check_strtox_error(). Rename both to @ep.
* qemu_strtol()'s variable @err is *negative* errno,
check_strtox_error()'s parameter @err is *positive*. Rename the
latter to @libc_errno.
Same for qemu_strtoul(), qemu_strtoi64(), qemu_strtou64(), of course.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-8-git-send-email-armbru@redhat.com>
The name qemu_strtoll() suggests conversion to long long, but it
actually converts to int64_t. Rename to qemu_strtoi64().
The name qemu_strtoull() suggests conversion to unsigned long long,
but it actually converts to uint64_t. Rename to qemu_strtou64().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1487708048-2131-7-git-send-email-armbru@redhat.com>
Fixes the following documentation bugs:
* Fails to document that null @nptr is safe.
* Fails to document that we return -EINVAL when no conversion could be
performed (commit 47d4be1).
* Confuses long long with int64_t, and unsigned long long with
uint64_t.
* Claims the unsigned conversions can underflow. They can't.
While there, mark problematic assumptions that int64_t is long long,
and uint64_t is unsigned long long with FIXME comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1487708048-2131-6-git-send-email-armbru@redhat.com>
Plenty of code relies on QemuOpt member @str not being null, including
qemu_opts_print(), qemu_opts_to_qdict(), and callbacks passed to
qemu_opt_foreach().
Begs the question whether it can be null. Only opt_set() creates
QemuOpt. It sets member @str to its argument @value. Passing null
for @value would plant a time bomb. Callers:
* opts_do_parse() can't pass null.
* qemu_opt_set() passes its argument @value. Callers:
- qemu_opts_from_qdict_1() can't pass null
- qemu_opts_set() passes its argument @value, but none of its
callers pass null.
- Many more outside qemu-option.c, but they shouldn't pass null,
either.
Assert member @str isn't null, so that misuse is caught right away.
Simplify parse_option_bool(), parse_option_number() and
parse_option_size() accordingly. Best viewed with whitespace changes
ignored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-3-git-send-email-armbru@redhat.com>
This adds a CoMutex around the existing CoQueue. Because the write-side
can just take CoMutex, the old "writer" field is not necessary anymore.
Instead of removing it altogether, count the number of pending writers
during a read-side critical section and forbid further readers from
entering.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213181244.16297-7-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
All that CoQueue needs in order to become thread-safe is help
from an external mutex. Add this to the API.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213181244.16297-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Running a very small critical section on pthread_mutex_t and CoMutex
shows that pthread_mutex_t is much faster because it doesn't actually
go to sleep. What happens is that the critical section is shorter
than the latency of entering the kernel and thus FUTEX_WAIT always
fails. With CoMutex there is no such latency but you still want to
avoid wait and wakeup. So introduce it artificially.
This only works with one waiters; because CoMutex is fair, it will
always have more waits and wakeups than a pthread_mutex_t.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213181244.16297-3-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This uses the lock-free mutex described in the paper '"Blocking without
Locking", or LFTHREADS: A lock-free thread library' by Gidenstam and
Papatriantafilou. The same technique is used in OSv, and in fact
the code is essentially a conversion to C of OSv's code.
[Added missing coroutine_fn in tests/test-aio-multithread.c.
--Stefan]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213181244.16297-2-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pull the increment/decrement pair out of aio_bh_poll and into the
callers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-18-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch prepares for the removal of unnecessary lockcnt inc/dec pairs.
Extract the dispatching loop for file descriptor handlers into a new
function aio_dispatch_handlers, and then inline aio_dispatch into
aio_poll.
aio_dispatch can now become void.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-17-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-16-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-15-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This covers both file descriptor callbacks and polling callbacks,
since they execute related code.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-14-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-13-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The AioContext data structures are now protected by list_lock and/or
they are walked with FOREACH_RCU primitives. There is no need anymore
to acquire the AioContext for the entire duration of aio_dispatch.
Instead, just acquire it before and after invoking the callbacks.
The next step is then to push it further down.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-12-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As a small step towards the introduction of multiqueue, we want
coroutines to remain on the same AioContext that started them,
unless they are moved explicitly with e.g. aio_co_schedule. This patch
avoids that coroutines switch AioContext when they use a CoMutex.
For now it does not make much of a difference, because the CoMutex
is not thread-safe and the AioContext itself is used to protect the
CoMutex from concurrent access. However, this is going to change.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-9-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_co_wake provides the infrastructure to start a coroutine on a "home"
AioContext. It will be used by CoMutex and CoQueue, so that coroutines
don't jump from one context to another when they go to sleep on a
mutex or waitqueue. However, it can also be used as a more efficient
alternative to one-shot bottom halves, and saves the effort of tracking
which AioContext a coroutine is running on.
aio_co_schedule is the part of aio_co_wake that starts a coroutine
on a remove AioContext, but it is also useful to implement e.g.
bdrv_set_aio_context callbacks.
The implementation of aio_co_schedule is based on a lock-free
multiple-producer, single-consumer queue. The multiple producers use
cmpxchg to add to a LIFO stack. The consumer (a per-AioContext bottom
half) grabs all items added so far, inverts the list to make it FIFO,
and goes through it one item at a time until it's empty. The data
structure was inspired by OSv, which uses it in the very code we'll
"port" to QEMU for the thread-safe CoMutex.
Most of the new code is really tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-3-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
AioContext is fairly self contained, the only dependency is QEMUTimer but
that in turn doesn't need anything else. So move them out of block-obj-y
to avoid introducing a dependency from io/ to block-obj-y.
main-loop and its dependency iohandler also need to be moved, because
later in this series io/ will call iohandler_get_aio_context.
[Changed copyright "the QEMU team" to "other QEMU contributors" as
suggested by Daniel Berrange and agreed by Paolo.
--Stefan]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-2-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.
The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.
Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
To iterate over all QemuOpts currently requires using a callback
function which is inconvenient for control flow. Add support for
using iterator functions more directly
QemuOptsIter iter;
QemuOpt *opt;
qemu_opts_iter_init(&iter, opts, "repeated-key");
while ((opt = qemu_opts_iter_next(&iter)) != NULL) {
....do something...
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-8-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implements 128-bit left shift and right shift as well as their
testcases. By design, shift silently mods by 128, so the caller is
responsible to assert the shift range if necessary.
Left shift sets the overflow flag if any non-zero digit is shifted out.
Examples:
ulshift(&low, &high, 250, &overflow);
equivalent: n << 122
urshift(&low, &high, -2);
equivalent: n << 126
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[dwg: Added test-shift128 to .gitignore]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is not possible to implement functions in host-utils.c for
architectures with quadwords because the guard is implemented in the
Makefile. This patch move the guard out of the Makefile to the
implementation file.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Bitmaps with a granularity of 58 or above can be neither serialized nor
deserialized (see the comment in the function added in this series for
an explanation). This patch adds a function so that we can check whether
a bitmap actually can be (de-)serialized at all, thus avoiding failing
the necessary assertion in hbitmap_serialization_granularity().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20161115225746.3590-2-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
A fix has been committed in upstream glib commit
210a9796f78eb90f76f1bd6a304e9fea05e97617.
(See also related bug https://bugzilla.gnome.org/show_bug.cgi?id=764415)
It is desirable to use the glib version instead of qemu copy, since it
provides more debugging facilities (G_MAIN_POLL_DEBUG etc), and
hopefully has a better maintainance. Hopefully, we can drop the qemu
copy in a few years.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
1st mmap returns *ptr* which aligns to host page size,
| size + align |
------------------------------------------
ptr
input param *align* could be 1M, or 2M, or host page size. After
QEMU_ALIGN_UP, offset will >= 0
2nd mmap use flag MAP_FIXED, then it return ptr+offset, or else fail.
If it success, then we will have something like:
| offset | size |
--------------------------------------
ptr ptr1
*ptr1* is what we really want to return, it equals ptr+offset.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently DNS resolution is done automatically as part
of the creation of a QIOChannelSocket object instance.
This works ok for network clients where you just end
up a single network socket, but for servers, the results
of DNS resolution may require creation of multiple
sockets.
Introducing a DNS resolver API allows DNS resolution
to be separated from the socket object creation. This
will make it practical to create multiple QIOChannelSocket
instances for servers.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alberto Garcia
Fam Zheng
Paolo Bonzini
Philippe Mathieu-Daudé
Peter Maydell
Markus Armbruster
Richard Henderson
Manos Pitsidianakis
Alistair Francis
Daniel P. Berrange
Vladimir Sementsov-Ogievskiy
Mao Zhongyi
Pranith Kumar
Marc-André Lureau
Emilio G. Cota
Roman Pen
Stefano Stabellini
Greg Kurz
Peter Xu
Stefan Hajnoczi
Eric Blake
Saurav Sachidanand
Jose Ricardo Ziviani
Farhan Ali
Max Reitz
Gerd Hoffmann
Richard W.M. Jones
Halil Pasic
Andrey Shedel
Jitendra Kolhe
Peter Lieven
Suramya Shah
Alexey Kardashevskiy
Cao jin
Stefan Weil