Commit Graph

11 Commits

Author SHA1 Message Date
David Gibson 72700d7e73 spapr_pci: (Mostly) remove spapr-pci-vfio-host-bridge
Now that the regular spapr-pci-host-bridge can handle EEH, there are only
two things that spapr-pci-vfio-host-bridge does differently:
    1. automatically sizes its DMA window to match the host IOMMU
    2. checks if the attached VFIO container is backed by the
       VFIO_SPAPR_TCE_IOMMU type on the host

(1) is not particularly useful, since the default window used by the
regular host bridge will work with the host IOMMU configuration on all
current systems anyway.

Plus, automatically changing guest visible configuration (such as the DMA
window) based on host settings is generally a bad idea.  It's not
definitively broken, since spapr-pci-vfio-host-bridge is only supposed to
support VFIO devices which can't be migrated anyway, but still.

(2) is not really useful, because if a guest tries to configure EEH on a
different host IOMMU, the first call will fail and that will be that.

It's possible there are scripts or tools out there which expect
spapr-pci-vfio-host-bridge, so we don't remove it entirely.  This patch
reduces it to just a stub for backwards compatibility.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-03-16 09:55:11 +11:00
David Gibson c1fa017c7e spapr_pci: Allow EEH on spapr-pci-host-bridge
Now that the EEH code is independent of the special
spapr-vfio-pci-host-bridge device, we can allow it on all spapr PCI
host bridges instead.  We do this by changing spapr_phb_eeh_available()
to be based on the vfio_eeh_as_ok() call instead of the host bridge class.

Because the value of vfio_eeh_as_ok() can change with devices being
hotplugged or unplugged, this can potentially lead to some strange edge
cases where the guest starts using EEH, then it starts failing because
of a change in status.

However, it's not really any worse than the current situation.  Cases that
would have worked previously will still work (i.e. VFIO devices from at
most one VFIO IOMMU group per vPHB), it's just that it's no longer
necessary to use spapr-vfio-pci-host-bridge with the groupid pre-specified.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-03-16 09:55:11 +11:00
David Gibson fbb4e98341 spapr_pci: Eliminate class callbacks
The EEH operations in the spapr-vfio-pci-host-bridge no longer rely on the
special groupid field in sPAPRPHBVFIOState.  So we can simplify, removing
the class specific callbacks with direct calls based on a simple
spapr_phb_eeh_enabled() helper.  For now we implement that in terms of
a boolean in the class, but we'll continue to clean that up later.

On its own this is a rather strange way of doing things, but it's a useful
intermediate step to further cleanups.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-03-16 09:55:10 +11:00
David Gibson 76a9e9f680 spapr_pci: Switch to vfio_eeh_as_op() interface
This switches all EEH on VFIO operations in spapr_pci_vfio.c from the
broken vfio_container_ioctl() interface to the new vfio_as_eeh_op()
interface.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2016-03-16 09:55:10 +11:00
Peter Maydell 0d75590d91 ppc: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Gavin Shan d76548a98f sPAPR: Enable EEH on VFIO PCI device only
This checks if the PCI device retrieved from the PCI device address
is VFIO PCI device when enabling EEH functionality. If it's not
VFIO PCI device, the EEH functonality isn't enabled.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23 10:51:11 +10:00
Gavin Shan 6319b1dad0 sPAPR: Clear stale MSIx table during EEH reset
The PCI device MSIx table is cleaned out in hardware after EEH PE
reset. However, we still hold the stale MSIx entries in QEMU, which
should be cleared accordingly. Otherwise, we will run into another
(recursive) EEH error and the PCI devices contained in the PE have
to be offlined exceptionally.

The patch introduces function spapr_phb_vfio_eeh_pre_reset(), which
is called by sPAPR when asserting hot or fundamental reset, to clear
stale MSIx table for VFIO PCI devices before EEH PE reset so that
MSIx table could be restored properly after EEH PE reset.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07 17:44:54 +02:00
Gavin Shan aef87d1b87 sPAPR: Reenable EEH functionality on reboot
When rebooting the guest, some PEs might be in frozen state. The
contained PCI devices won't work properly if their frozen states
aren't cleared in time. One case running into this situation would
be maximal EEH error times encountered in the guest.

The patch reenables the EEH functinality on PEs on PHB's reset
callback, which will clear their frozen states if needed.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07 17:44:53 +02:00
Gavin Shan 2aad88f4b0 sPAPR: Implement sPAPRPHBClass EEH callbacks
The patch implements sPAPRPHBClass EEH callbacks so that the EEH
RTAS requests can be routed to VFIO for further handling.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09 15:00:08 +01:00
Kim Phillips cf7087db10 vfio: move hw/misc/vfio.c to hw/vfio/pci.c Move vfio.h into include/hw/vfio
This is done in preparation for the addition of VFIO platform
device support.

Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-19 15:24:06 -07:00
Alexey Kardashevskiy 9fc34ada7e spapr_pci_vfio: Add spapr-pci-vfio-host-bridge to support vfio
The patch adds a spapr-pci-vfio-host-bridge device type
which is a PCI Host Bridge with VFIO support. The new device
inherits from the spapr-pci-host-bridge device and adds an "iommu"
property which is an IOMMU id. This ID represents a minimal entity
for which IOMMU isolation can be guaranteed. In SPAPR architecture IOMMU
group is called a Partitionable Endpoint (PE).

Current implementation supports one IOMMU id per QEMU VFIO PHB. Since
SPAPR allows multiple PHB for no extra cost, this does not seem to
be a problem. This limitation may change in the future though.

Example of use:
Configure and Add 3 functions of a multifunctional device to QEMU:
(the NEC PCI USB card is used as an example here):
-device spapr-pci-vfio-host-bridge,id=USB,iommu=4,index=7 \
-device vfio-pci,host=4:0:1.0,addr=1.0,bus=USB,multifunction=true
-device vfio-pci,host=4:0:1.1,addr=1.1,bus=USB
-device vfio-pci,host=4:0:1.2,addr=1.2,bus=USB

where:
* index=7 is a QEMU PHB index (used as source for MMIO/MSI/IO windows
offset);
* iommu=4 is an IOMMU id which can be found in sysfs:
[aik@vpl2 ~]$ cd /sys/bus/pci/devices/0004:00:00.0/
[aik@vpl2 0004:00:00.0]$ ls -l iommu_group
lrwxrwxrwx 1 root root 0 Jun  5 12:49 iommu_group -> ../../../kernel/iommu_groups/4

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-27 13:48:23 +02:00