Commit Graph

414 Commits

Author SHA1 Message Date
Michael Tokarev 6e9965d429 s390x: remove s390-zipl.rom
This is an s390 boot rom which was used in s390-virtio machine.
but since commit 3538fb6f89
"s390x: remove s390-virtio machine", this file isn't used.
The only place it is referenced in the code is an unused
define ZIPL_FILENAME.  There's also comment in hw/s390/ipl.c
which I'm modifying too, to refer to s390-ccw.img instead.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-02-11 15:15:47 +03:00
Mark Cave-Ayland 44c44eceea Update OpenBIOS images
Update OpenBIOS images to SVN r1378 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2016-02-04 11:17:44 +00:00
Gerd Hoffmann 4b9294c00e seabios: update binaries to release 1.9.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-05 13:04:15 +01:00
Cornelia Huck 07af4c53a5 pc-bios/s390-ccw: rebuild image
Contains:
- pc-bios/s390-ccw: build for z900

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-12-01 09:57:27 +01:00
Christian Borntraeger 7619562a64 pc-bios/s390-ccw: build for z900
Newer distributions have an architecture level set to z9, z196
or similar - also as default option for the compiler.

We should build the bios for z900 to allow it to run with
all 64bit CPUs. This will become more important as soon as
QEMU/KVM does support CPU models.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-12-01 09:57:27 +01:00
Cornelia Huck 81a93ee64d pc-bios/s390-ccw: rebuild image
Contains:
  pc-bios/s390-ccw: Always adjust virtio sector count
  pc-bios/s390-ccw: ISO-9660 El Torito boot implementation
  pc-bios/s390-ccw: El Torito s390x boot entry check
  pc-bios/s390-ccw: El Torito 16-bit boot image size field workaround

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-11-11 17:21:39 +01:00
Maxim Samoylov 869648e87e pc-bios/s390-ccw: El Torito 16-bit boot image size field workaround
Because of El Torito spec flaw boot image size needs to be verified.

Boot catalog entry size field has 16-bit width, and specifies size
in 512-byte units.

Thus, boot image size cannot exceed 32M.

We actually search for the file to get the file size.

This is done by scanning the ISO directory tree for the ISO block number
and reading the file size from the directory entry.

Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-11-11 17:21:39 +01:00
Maxim Samoylov ba21f0cca8 pc-bios/s390-ccw: El Torito s390x boot entry check
Boot entry is considered compatible if boot image is Linux kernel
with matching S390 Linux magic string.

Empty boot images with sector_count == 0 are considered broken.

Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-11-11 17:21:39 +01:00
Maxim Samoylov 866cac91e0 pc-bios/s390-ccw: ISO-9660 El Torito boot implementation
This patch enables boot from media formatted according to
ISO-9660 and El Torito bootable CD specification.

We try to boot from device as ISO-9660 media when SCSI IPL failed.

The first boot catalog entry with bootable flag is used.

ISO-9660 media with default 2048-bytes sector size only is supported.

Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-11-11 17:21:39 +01:00
Maxim Samoylov 38150be860 pc-bios/s390-ccw: Always adjust virtio sector count
Let's always adjust the sector number to be read using the current
virtio block size value.

This prepares for the implementation of IPL from ISO-9660 media.

Signed-off-by: Maxim Samoylov <max7255@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-11-11 17:21:39 +01:00
Alexey Kardashevskiy 1210481958 pseries: Update SLOF firmware image to qemu-slof-20151103
The changes are:
1. supports recent binutils;
2. 64bit BARs behind PCI bridges supported;
3. Many fixes for USB keyboard support - keys, XHCI;
4. virtio-vga support.

This image was built with:
gcc version 4.8.3 20140911 (Red Hat 4.8.3-7) (GCC)
GNU ld version 2.23.2

The full changelog is:
  > version: update to 20151103
  > documentation: Add a clause about signing off
  > qemu/js2x/client: Support binutils >= 2.25.1
  > Fix special keys on USB
  > Fix function keys on USB
  > pci-scan: program 64-bit mem bar range in pci-bridge bar
  > Allow to build SLOF on Little Endian host
  > usb-xhci: add keyboard support
  > usb-xhci: ready the link trb early
  > usb-xhci: scan usb high speed ports
  > usb-xhci: bulk improve event handling loop
  > usb-xhci: return on allocation failure
  > usb-xhci: add delay in shutdown path
  > usb-xhci: event trbs does not need link trb
  > usb-hid: refactor usb key reading
  > takeover: Fix header includes
  > board-js2x: Add missing file dma-function.fs
  > vga: Add support for virtio-vga
  > qemu-vga: Use MMIO BAR instead of legacy IO ports
  > slof: Change call_c() function to a proper assembler function

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-11 13:28:45 +11:00
Mark Cave-Ayland 637016c260 Update OpenBIOS images
Update OpenBIOS images to SVN r1353 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-10-28 00:01:28 +00:00
Christian Borntraeger af3c15fee5 pc-bios/s390-ccw: avoid floating point operations
Some gcc versions (e.g. Fedora 22 gcc 5.1.1) seem to use floating
point registers for spilling and filling of general purpose registers.
As the BIOS does not activate the AFP register setting of CR0 this can
cause data exception program checks.
Disallow floating point in the BIOS as a simple solution.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-2-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-02 13:31:52 +02:00
Alexey Kardashevskiy 92d7a30cb3 pseries: Update SLOF firmware image to qemu-slof-20150813
The changes are:
1. GPT support;
2. Much faster VGA support.

The full changelog is:
  > Add missing half word access case to _FASTRMOVE and _FASTMOVE
  > Remove unused RMOVE64 stub
  > fbuffer: Implement RFILL as an accelerated primitive
  > fbuffer: Implement MRMOVE as an accelerated primitive
  > fbuffer: Precalculate line length in bytes
  > terminal: Disable the terminal-write trace by default
  > boot: remove trailing ":" in the bootpath
  > ci: implement boot client interface
  > boot: bootpath should be complete device path
  > fbuffer: Use a smaller cursor
  > fbuffer: Improve invert-region helper
  > usb-hid: Caps is not always shift
  > cas: Increase FDT buffer size to accomodate larger ibm, cas node properties
  > README: Update with patch submittion note
  > disk-label: add support for booting from GPT FAT partition
  > disk-label: introduce helper to check fat filesystem
  > introduce 8-byte LE helpers
  > disk-label: simplify gpt-prep-partition? routine
  > fbuffer: introduce the invert-region-x helper
  > fbuffer: introduce the invert-region helper
  > fbuffer: simplify address computations in fb8-toggle-cursor

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23 10:51:09 +10:00
Peter Maydell 27c7275a56 ipxe: update to 35c53797 to 4e03af8, build tweaks.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJV6EJxAAoJEEy22O7T6HE4KjwQAJwPviOYkS7t/L7jwv6RZJyr
 zvQYiMa18qYHvLhdRYTv/3FcNUI8Nthqf8lUDSuuwWEIStDVNa2+zjNEZcomp8CI
 8dTsCRc4AHFqMCe6Vj7UnJwb+WHUy/d8NhrOOqHntZ7019AwzbchxxTxeISV7paV
 a8OrJoz5Ta2h5jCAglEypGTmMTC2F8Mci0I/0Odt9KOZFbRRWb/U+38BS70/Imxf
 junys7Yp0bqxkXO94US5NYRj2VzNWryEBcNqReOKejACH2yK/ZzsunOFAzkSdyeg
 I2U2eI4a84t7dQdAETElLVz8faJxQ1SA7VXakA6WWIcH7YNVgtgfN/j2o4MYp2VI
 g9YNIcjOljK2U7QWmv64N8JEf8IDFDRkmnXX0Dm9UJDtWIT2ASvksYncX7ZsPy3Q
 P0e/ztpnuLipHv8HMFeWov6lktQt2CRIotW6X2mqAzQNs85TJEQK0aHyeAsn79IT
 hW3uY+DCK3GPp2rseJUKaN5Zb/az7bg4mEjbKr4veIm2QceUbA3MMtVfE6ODqUfx
 I2VENKNoQ+Ep+dwxTqRKFmKixtEczM61TLIPvnEHSKUTF0VJeoqAn9VI6jTj5XR3
 DtHx4cTxkwBK5b8pvmNz1jVj9VeLws+9JmhMTRTUJjYrhAbTI2v4VTOIqvbfVLY/
 qukfBGL8HufEQ6rkQ7so
 =coER
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-ipxe-20150903-1' into staging

ipxe: update to 35c53797 to 4e03af8, build tweaks.

# gpg: Signature made Thu 03 Sep 2015 13:52:01 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-ipxe-20150903-1:
  ipxe: update binaries
  ipxe: use upstream configuration
  ipxe: don't override GITVERSION
  ipxe: update from 35c53797 to 4e03af8

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-22 19:22:23 +01:00
Alexander Graf d4574435a6 PPC: E500: Update u-boot to commit 79c884d7e4
The current U-Boot binary in QEMU has a bug where it fails to support
dynamic CCSR addressing. Without this support, u-boot can not boot the
ppce500 machine anymore. This has been fixed upstream in u-boot commit
e834975b.

Update the u-boot blob we carry in QEMU to the latest u-boot upstream,
so that we can successfully run u-boot with the ppce500 machine again.

CC: qemu-stable@nongnu.org
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Thomas Huth <thuth@redhat.com>
2015-09-20 22:48:39 +02:00
Cornelia Huck 9f70b85c40 pc-bios/s390-ccw: rebuild image
Contains:
- Device detection in higher subchannel sets

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-07 16:10:43 +02:00
Alexander Yarygin 0f79b89bc2 pc-bios/s390-ccw: Device detection in higher subchannel sets
If no bootdevice was specified, we try to autodetect a suitable IPL
device. Current code only searched in subchannel set 0; extend this
search to higher subchannel sets as well.

Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-07 16:10:43 +02:00
Gerd Hoffmann f479832014 ipxe: update binaries
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2015-09-03 14:46:24 +02:00
Alexey Kardashevskiy 780184aae6 pseries: Update SLOF firmware image to qemu-slof-20150429
The changelog is:
  > version: update to 20150429
  > pci: Use QEMU created PCI device nodes
  > usb: support 64-bit pci bars
  > pci: Support 64-bit address translation
  > pci: program correct bridge limit registers during probe
  > scsi: handle report-luns failure
  > Fix "key?" Forth word when using USB keyboards
  > Remove bulk.fs package
  > Include make.rules in the library Makefiles

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07 17:44:49 +02:00
Cornelia Huck 6e7cd94462 s390-ccw.img: update
Update for "s390-ccw.img: Consume service interrupts".

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-06-30 09:34:58 +02:00
Christian Borntraeger bdc7fe3638 s390-ccw.img: Consume service interrupts
We have to consume the outstanding service interrupt after each
service call, otherwise a correct implementation will return
CC=2 on subsequent service calls.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-06-30 09:34:58 +02:00
Mark Cave-Ayland a3122b681a Update OpenBIOS images
Update OpenBIOS images to SVN r1340 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-06-17 20:02:15 +01:00
Gerd Hoffmann f3bcd42683 update seabios and vgabios binaries
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-17 09:28:03 +02:00
Aurelien Jarno 8369e339d2 s390/bios: build with -fdelete-null-pointer-checks
Starting with version 4.9, GCC assumes it can't safely dereference null
pointers, and uses this for some optimizations. On s390, the lowcore
memory is located at address 0, so this assumption is wrong and breaks
the s390-ccw firmware. Pass -fdelete-null-pointer-checks to avoid that.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <1434363843-14576-1-git-send-email-aurelien@aurel32.net>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-15 13:31:33 +02:00
Programmingkid 4e34017c21 Makefile.target: set icon for binary file on Mac OS X
Implements setting the icon for the binary file in Mac OS X.

Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[PMM: tweaked makefile to use $@ and quiet-command]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-19 09:11:17 +01:00
Alexey Kardashevskiy 0d2f830255 pseries: Update SLOF firmware image to qemu-slof-20150313
The changelog is:
  > virtio: Fix vring allocation
  > helpers: Fix SLOF_alloc_mem_aligned to meet callers expectation
  > Set default palette according to "16-color Text Extension" document
  > Fix rectangle drawing functions to work also with higher bit depths
  > Fix the x86emu patch file
  > Silence compiler warning when building the biosemu
  > Use device-type Forth word to set up the corresponding property
  > Improve /openprom node
  > pci-properties: Remove redundant call to device-type
  > cas: reconfigure memory nodes
  > pci: use 64bit bar ranges

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-25 22:49:45 +01:00
Gerd Hoffmann 93f7c4f09f seabios: update to 1.8.1 stable release
Carries two bugfixes and support for multiple pci root buses.

git shortlog rel-1.8.0..rel-1.8.1
=================================

Ameya Palande (1):
      x86: add barrier to read{b,w,l} and write{b,w,l} functions

Kevin O'Connor (1):
      smp: Fix smp race introduced in 0673b787

Marcel Apfelbaum (2):
      fw/pci: scan all buses if extraroots romfile is present
      fw/pci: map memory and IO regions for multiple pci root buses

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-16 09:07:15 +01:00
Mark Cave-Ayland 09c0772be9 Update OpenBIOS images
Update OpenBIOS images to SVN r1334 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-03-13 11:03:41 +00:00
Peter Maydell 165fa4091e s390x/kvm: Features and fixes for 2.3
- an extension to the elf loader to allow relocations
 - make the ccw bios relocatable. This allows for bigger ramdisks
   or smaller guests
 - Handle all slow SIGPs in QEMU (instead of kernel) for better
   compliance and correctness
 - tell the KVM module the maximum guest size. This allows KVM
   to reduce the number or page table levels
 - Several fixes/cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJVABYpAAoJEBF7vIC1phx8M/kP/AsuFTCrWebziX5qdeIFX8Cu
 RBcnqm7Dgt7lg+fyt/mj7g7/PVZEoe9AQ5hWoXmguR850/PmMuEDfHhY6pAfKU+r
 RokYiQR2pHDWFU9D2qf3ggEcI4suym1mmuMjx4TEs9318zpREHu9fGpzfJxlQgXa
 SUqQDZWElYyiF1nu8cxvH7wqeJLalKSiQBRtkM3w2oG8Nw1TgFxt/xiYHkiz/rkr
 U2sQrCabOCcVC/nlDAaWajBq18rzqhFk6QZEZsf9O4jsxy8Pbmkw2cqSp68KBMeB
 o50lRrguGhuejQg6g4AXZWGgUt5YnNL0CIHmTXp0KTnijGSAHnWUPf+qCOOR/sfn
 1roTNwCH8rjSfpEPKAhmiLRcPTVzy6IYxaT+J7KniCRAyHdIk2NBF3cHzDBy47uC
 pre1pIHnKkwBkxv/xkj8CHlfcpCjp8sXhW6FSXoX9On5SKiROnQUwiLoUjtnvRXe
 kQZRhtgJSKnLTtEEZ3XWh/UDyD2QJiwnm1E5SjXEa/mdDqgUmsVsPtz29f/xDKJA
 GZGNOCsIew0286C+tf5M88JpIXqpAiEYXA9vw5ZUqzxh3ArNuT0GJGxrlWxbqD8j
 tbvjHIja62IbCxM8dtZ9v0M4YFNU+VLHdKEREziK6RKS9Ek7rJmSh8128JNQhJ/X
 RjiUxdcbApvEunZInwB/
 =6Cw+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150310' into staging

s390x/kvm: Features and fixes for 2.3

- an extension to the elf loader to allow relocations
- make the ccw bios relocatable. This allows for bigger ramdisks
  or smaller guests
- Handle all slow SIGPs in QEMU (instead of kernel) for better
  compliance and correctness
- tell the KVM module the maximum guest size. This allows KVM
  to reduce the number or page table levels
- Several fixes/cleanups

# gpg: Signature made Wed Mar 11 10:17:13 2015 GMT using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"

* remotes/borntraeger/tags/s390x-20150310:
  s390-ccw: rebuild BIOS
  s390/bios: Make the s390-ccw.img relocatable
  elf-loader: Provide the possibility to relocate s390 ELF files
  s390-ccw.img: Reinitialize guessing on reboot
  s390-ccw.img: Allow bigger ramdisk sizes or offsets
  s390x/kvm: passing max memory size to accelerator
  virtio-ccw: Convert to realize()
  virtio-s390: Convert to realize()
  virtio-s390: s390_virtio_device_init() can't fail, simplify
  s390x/kvm: enable the new SIGP handling in user space
  s390x/kvm: deliver SIGP RESTART directly if stopped
  s390x: add function to deliver restart irqs
  s390x/kvm: SIGP START is only applicable when STOPPED
  s390x/kvm: implement handling of new SIGP orders
  s390x/kvm: trace all SIGP orders
  s390x/kvm: helper to set the SIGP status in SigpInfo
  s390x/kvm: pass the SIGP instruction parameter to the SIGP handler
  s390x/kvm: more details for SIGP handler with one destination vcpu
  s390x: introduce defines for SIGP condition codes
  synchronize Linux headers to 4.0-rc3

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 15:11:58 +00:00
Christian Borntraeger 2d5eeef1c0 s390-ccw: rebuild BIOS
rebuild bios to get latest changes:

s390/bios: Make the s390-ccw.img relocatable
s390-ccw.img: Reinitialize guessing on reboot
s390-ccw.img: Allow bigger ramdisk sizes or offsets

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-11 11:15:45 +01:00
Thomas Huth d884c86dcd s390/bios: Make the s390-ccw.img relocatable
The current bios sits at location 0x7e00000 in the guest RAM
and thus prevents loading of bigger ramdisks. By making the
image relocatable we can move it to the end of the RAM so that
it is getting out of the way.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Message-Id: <1425895973-15239-3-git-send-email-thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Fixup build failure on 32 bit hosts]
2015-03-11 11:15:38 +01:00
Peter Maydell 4ba4df405c qemu-sparc update
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJU/vQnAAoJEFvCxW+uDzIfSHQIAKLVePJyOEtVA5OOUSyuA5TQ
 6MNXg1X+PxD0GT8iyKhcyHqaRSibPjY/D2Hb8MyNt/lLIQj13hfL1fXXAMvnjY1+
 WcCpGfbZmmcIpgjY+OWkkSVU3nSxNE6a0ZgdOvK9Cvc+dJHMpO02E5kRqig6nYX6
 UuA7aIgjE2T63PPucuEjFVA4a8v7NsqO4OBmYPO/L7KEpAQk3Y/qDDGahQRXuBXl
 0poyJrj99BoKHJFemf7L79SbpZHrnaQ54dndqerq5tzmBXRVjhYJa/iLm0LSjPnN
 kWdlMKXSGgI/rFRWZqfOk+jDIZb21xliM6y/lDpDJGdoC1aPsIWwQ0mFK6ZPVDo=
 =Ee+Y
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging

qemu-sparc update

# gpg: Signature made Tue Mar 10 13:39:51 2015 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"

* remotes/mcayland/tags/qemu-sparc-signed:
  sun4u: switch m48t59 NVRAM to MMIO access
  MAINTAINERS: add myself as SPARC maintainer
  doc: minor updates to SPARC32 and SPARC64 documentation
  m48t59: add m48t59 sysbus device
  m48t59: introduce new base-year qdev property
  m48t59: let init functions return a Nvram object
  m48t59: add a Nvram interface
  m48t59: register a QOM type for each nvram type we support
  m48t59: move ISA ports/memory regions registration to QOM constructor

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 08:44:59 +00:00
Mark Cave-Ayland f3b18f35a2 sun4u: switch m48t59 NVRAM to MMIO access
Real sun4u systems memory-map the NVRAM on the (ISA) ebus, so switch over to
MMIO from ioport access whilst setting the base year to 1968 as used by Sun
systems. This allows all SPARC64 OSs included in my tests to correctly detect
the NVRAM IC and read the hardware clock correctly upon boot.

Note that this also requires a corresponding OpenBIOS update to r1330 in order
to switch the SPARC64 NVRAM accessors over from ioport to MMIO.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2015-03-10 09:36:19 +00:00
Christian Borntraeger 5c8d542004 s390-ccw.img: Reinitialize guessing on reboot
guessed_disk_nature is a static zero variable. As the QEMU ELF
loader does not zero the BSS section, lets do it explicitely here.

This fixes reboot for some corner cases (like FCP flash
devices with logical_block_size=512, physical_block_size=4096)

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <1425310029-53396-3-git-send-email-borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
Christian Borntraeger 2be9d2927c s390-ccw.img: Allow bigger ramdisk sizes or offsets
The s390-ccw bios creates the the virtqueue at 100MB. For
big ramdisks or offsets (via zipl) this gets overwritten.
As a quick band-aid, lets move the virtqueue into the bss
section, which is at 0x7f00000. As the bios code (text) is
at 0x7e00000 we can now handle ramdisk which are  ~27MB
bigger.

Long term we want to make the s390-ccw bios position
independent and load of at the end of memory.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-Id: <1425310029-53396-2-git-send-email-borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
Wang Xin 3e4c67c9ce qemu-char: add cyrillic key 'numerosign' to Russian keymap
numero sign is the number sign key of Russian keyboard layout, we
get this key with 'shift + 3'. It's missing in current Russian keymap file,
this patch fixes it.
As number sign does not exsit in Russian keyboard layout[1][2], this
patch also removes the 'numbersign' from Russian keymap.

[1] http://en.wikipedia.org/wiki/Keyboard_layout#Russian
[2] http://kbd-intl.narod.ru/english/layouts

Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10 08:15:34 +03:00
Gerd Hoffmann 21f5826a04 seabios: update to 1.8.0 release
'git shortlog 8936dbb2..4c59f5d8' for seabios repo:

David Woodhouse (4):
      Update EFI_COMPATIBILITY16_TABLE to match 0.98 spec update
      build: use -m16 where available instead of asm(".code16gcc")
      romlayout: Use .code16 not .code16gcc
      vgabios: Use .code16 not .code16gcc

Gerd Hoffmann (2):
      add scripts/tarball.sh
      build: set LC_ALL=C

Hannes Reinecke (1):
      megasas: read addional PCI I/O bar

Ian Campbell (1):
      romlayout: Use "rep ; nop" not "rep nop".

Kevin O'Connor (139):
      vgabios: Return from handle_1011() if handler found.
      edd: Move EDD get drive parameters (int 1348) logic from disk.c to block.c.
      edd: Use sectors==-1 to detect removable media.
      edd: Separate out ATA and virtio specific parts of fill_edd().
      cdemu: store internal cdemu fields in standard "el-torito" spec format.
      Move cdemu call interface and disk_ret helper code to disk.c.
      smm: Replace SMI assembler code with C code.
      smm: Use a C struct to define the layout of the SMM area.
      smp: Replace QEMU SMP init assembler code with C; run only in 32bit mode.
      Don't enable thread preemption during S3 resume vga option rom execution.
      Remove old Bochs bios fixed address string at 0xfff00.
      Move most of the VAR16FIXED() defs to misc.c.
      build: Avoid absolute paths during "whole-program" compiling.
      Make sure handle_smi() and handle_smp() are compiled out if not enabled.
      Remove the TODO file.
      Abstract reset call (and possible 16bit mode switch) into reset() function.
      build: Remove unused function getSectionsStart() from layoutrom.py.
      build: Extract section visiting logic in layoutrom.py.
      build: Refactor layoutrom.py gc() function.
      build: Use customized entry point for each type of build.
      build: Refactor findInit() function.
      build: Rework getRelocs() to use a hash instead of categories in layoutrom.py
      build: Keep segmented sections separate until final link step.
      build: Use fileid instead of category to write sections in layoutrom.py.
      build: Only export needed fields in LayoutInfo in layoutrom.py.
      build: Get fixed address variables from 32bit compile pass (not 16bit)
      build: Minor - fix comments referring to old tools/ directory.
      xhci: Update the times for usb command timeouts.
      ehci: Update usb command timeouts to use usb_xfer_time()
      uhci: Update usb command timeouts to use usb_xfer_time()
      ohci: Update usb command timeouts to use usb_xfer_time()
      vgabios: Fix broken build resulting from e5749978.
      boot: Change ":rom%d" boot order rom instance to ":rom%x"
      Minor - remove stray tab from src/fw/smm.c.
      build: Update kconfig to version in Linux 3.16.
      usb: Fix usb_xfer_time() to work when called in 16bit mode.
      xhci: Call usb_desc2pipe() on xhci_update_pipe().
      xhci: Remove 16bit code wrappers.
      xhci: Use high memory instead of low memory for internal storage.
      xhci: Move root hub and setup code to top of file.
      xhci: Add xhci_check_ports() and xhci_free_pipes() functions.
      ehci: Move port power up from ehci_hub_detect() to check_ehci_ports().
      usb-hub: Enable power to all ports prior to calling usb_enumerate().
      xhci: Change xhci_hub_detect() to use connect status instead of link state.
      uhci: Repeatedly poll for device detect for 100ms.
      ohci: Repeatedly poll for device detect for 100ms.
      ehci: Stall uhci/ohci init only until default port routing is done.
      usb: Perform device detect polling on all usb controllers.
      ehci: Fix bug in hub port assignment
      Revert "Use the extra stack for 16bit USB and PS2 keyboard/mouse commands."
      pmm: Fix entry point to support non-zero %ss
      Move stack hop code below call32/call16 code in stacks.c
      Add need_hop_back() call that determines if stack_hop_back is needed
      Update invoke_mouse_handler() to use need_hop_back()
      Update stack_hop_back() to jump to 16bit mode if called in 32bit mode.
      Track when entering via call32() and use the same mode for stack_hop_back()
      Simplify farcall16 code
      Update reset() to use call16_back()
      build: Support declaring 32bit C functions that must reside in the f-segment
      Move call16() functions from romlayout.S to inline assembler in stacks.c
      Break up call32() into call32() and call32_sloppy()
      Fully restore 16bit state during call16_sloppy()
      Implement call32 mechanism using SMIs.
      Move a20 code from system.c and ps2port.h to x86.h
      Backup and restore a20 on call32_sloppy()
      usb: Rename ?hci_control() to ?hci_send_control()
      usb: Rename usb_getFrameExp() to usb_get_period()
      usb: Rename findEndPointDesc() to usb_find_desc()
      usb: Rename send_default_control() to usb_send_default_control()
      usb: Rename free_pipe() to usb_free_pipe()
      usb: Clarify usb freelist manipulations
      xhci: Change xhci_update_pipe() to xhci_realloc_pipe() and use for alloc too
      uhci: Export uhci_realloc_pipe() instead of uhci_alloc_pipe()
      ohci: Export ohci_realloc_pipe() instead of ohci_alloc_pipe()
      ehci: Export ehci_realloc_pipe() instead of ehci_alloc_pipe()
      usb: Use usb_realloc_pipe for pipe alloc, update, and free.
      Use 32bit memcpy in int1587 when applicable
      Don't clobber %ax on ENTRY_INTO32 macro
      Create assembler macros for saving and restoring 'struct bregs'
      Do full BREGS backup/restore for pmm, pnp, and irqentry_extrastack
      Remove unused macro ENTRY_ST
      vgabios: Don't declare custom internal BDA storage in std/bda.h
      vgabios: Cache a pointer to the current mode struct in the BDA
      vgabios: Don't pass vmode_g to vgafb_move_chars() / vgafb_clear_chars()
      vgabios: Rename vbe_flags to flags
      vgabios: Set cursor shape fixes
      vgabios: Refactor get/set_cursor_shape() code
      vgabios: Only init BDA device details in init_bios_area()
      vgabios: Only set the dcc_index=8 if stdvga ports are available
      vgabios: Move standard table definitions to std/vga.h
      vgabios: Fill in available legacy modes in video_func_static at runtime
      vgabios: Add support for reading framebuffer in "direct" mode
      Fix PNP regression introduced in 99cb8f3e due to missed conversion
      Minor - move PORT_PS2_CTRLB from hw/ps2port.h to hw/timer.c
      vgabios: Support emulating text mode attributes while in graphics mode
      vgabios: Add software cursor capability
      Use an aligned stack offset when entering on the extra stack
      Minor - comment updates in romlayout.S
      Fix build issue on gcc34
      pciinit: Fix build warning in mch_pci_slot_get_irq()
      floppy: Make sure to yield() during floppy PIO
      Minor - be consistent in placement of .code16/32 in romlayout.S
      Use macros for .code16/32 mode switches in inline asm in stacks.c
      Eliminate FUNCFSEG - only force portions of inline asm to f-segment
      usb: Update USB hub code to support super speed hubs
      Simplify README files - point to online documentation instead
      sdcard: Initial support for SD cards on PCI SDHCI controllers on QEMU
      Add wiki documentation to repository
      docs: Don't point to repo README files
      docs: Add info on MODE16/MODESEGMENT compile time flags
      docs: Add page describing SeaBIOS final object linking
      scsi: Move cdb_* functions above scsi_* functions
      scsi: Move process_scsi_op() to hw/blockcmd.c and rename
      cdrom: call scsi_process_op() instead of cdb_read()
      scsi: Don't export cdb_* functions
      cdrom: Break up very large read requests into smaller requests
      block: Check for read/write requests over 64K
      usb: Add support for OHCI bulk transfers
      readserial: Enhance pipe support
      docs: Add documentation on using readserial.py script
      uhci: Enable "depth" tree traversal for bulk transfers
      uhci: Increase bulk transfer STACKTDS to 16
      vgabios: Support emulated text in gfx_read_char()
      ehci: No need to support td array wrapping
      ehci: Simplify fillTDbuffer() and rename
      ehci: Merge ehci_send_control with ehci_send_bulk
      ohci: Merge ohci_send_control with ohci_send_bulk
      uhci: Merge uhci_send_control with uhci_send_bulk
      xhci: Merge xhci_send_control with xhci_send_bulk
      usb: Use usb_send_pipe() now that all drivers have x_send_pipe()
      xhci: Move xhci_xfer_x() functions together
      xhci: Merge some xhci_xfer_x() functions into xhci_send_pipe()
      usb: Control transfers always have an 8 byte command size
      usb: Minor - properly free memory on get_device_config() error path
      checkstack: Handle callw instruction
      docs: Document why v1.6.3 release came after v0.6.2
      docs: Update release history with dates of stable releases
      docs: There is only one VAR16 flag now
      docs: Note v1.8.0 release

Marcel Apfelbaum (1):
      hw/pci: reserve IO and mem for pci express downstream ports with no devices attached

Markus Armbruster (1):
      boot: Fix boot order for SCSI target, lun > 9

Paolo Bonzini (5):
      piix: add and use dev-piix.h
      smm: complete SMM setup
      smm: unify SMM handlers
      vgabios: fix graphics operation with Bochs VGA in non-DISPI modes
      vgabios: implement read char in graphics mode

zhanghailiang (1):
      acpi: use specified macro instead of magic-number

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-19 09:33:03 +01:00
Cornelia Huck 553ce81c31 pc-bios/s390-ccw: update binary
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-02-03 13:42:40 +01:00
Christian Borntraeger f17a84300f pc-bios/s390-ccw: fix sparse warnings
Fix some sparse warnings in the s390-ccw bios.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-02-03 13:42:40 +01:00
Alexey Kardashevskiy 549cfe5d5d pseries: Update SLOF firmware image to 20141202
The changelog is:
  > version: update to 20141202
  > ipv4: Fix send packet across a subnet
  > pci: scan only type 0 and type 1
  > usb-xhci: support xhci extended capabilities
  > Fix term-io-key to also work when stdin has not been set yet
  > net-snk: llfw startup is using the wrong offset to handler
  > net-snk: Make call_client_interface() a bit more ABI compliant
  > net-snk: Remove custom printf version
  > net-snk: Sanitize our .lds file
  > net-snk: Avoid type clash for stdin & stdout
  > net-snk: use socket descriptor in the network stack
  > net-snk: Remove printk() in favor of printf()
  > net-snk: Remove redundant prototypes
  > net-snk: Remove unused timer functions
  > net-snk: Remove some unused PCI functions
  > net-snk: Remove module system
  > net-snk: Remove insmod/rmmod
  > net-snk: Remove snk_kernel_interface and related definitions
  > net-snk: Remove pci/vio_config gunk
  > js2x: Fix build
  > net-snk: Remoe some now unused "kernel" functions
  > rtas: Improve error handling in instantiate-rtas
  > version: update to 20140827
  > Add private HCALL to inform updated RTAS base and entry
  > xhci: fix port assignment

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07 16:16:27 +01:00
Gerd Hoffmann c246cee4ee update ipxe from 69313ed to 35c5379
Anton D. Kachalov (1):
      [intel] Add 8086:1557 card (Intel 82599 10G ethernet mezz)

Christian Hesse (1):
      [build] Merge util/geniso and util/genliso

Curtis Larsen (3):
      [efi] Use EFI_CONSOLE_CONTROL_PROTOCOL to set text mode if available
      [efi] Report errors from attempting to disconnect existing drivers
      [efi] Try various possible SNP receive filters

Dale Hamel (1):
      [smbios] Expose board serial number as ${board-serial}

Florian Schmaus (1):
      [build] Set GITVERSION only if there is a git repository

Hannes Reinecke (3):
      [ethernet] Provide eth_random_addr() to generate random Ethernet addresses
      [igbvf] Assign random MAC address if none is set
      [igbvf] Allow changing of MAC address

Jan Kiszka (1):
      [intel] Add I217-LM PCI ID

Marin Hannache (4):
      [nfs] Fix an invalid free() when loading a symlink
      [nfs] Fix an invalid free() when loading a regular (non-symlink) file
      [nfs] Rewrite NFS URI handling
      [readline] Add CTRL-W shortcut to remove a word

Michael Brown (144):
      [profile] Allow interrupts to be excluded from profiling results
      [intel] Exclude time spent in hypervisor from profiling
      [build] Fix version.o dependency upon git index
      [tcp] Defer sending ACKs until all received packets have been processed
      [lkrnprefix] Function as a bzImage kernel
      [build] Avoid errors when build directory is mounted via NFS
      [undi] Apply quota only to number of complete received packets
      [lkrnprefix] Make real-mode setup code relocatable
      [intel] Increase receive ring fill level
      [syslog] Strip invalid characters from hostname
      [test] Add self-tests for strdup()
      [libc] Prevent strndup() from reading beyond the end of the string
      [efi] Allow for optional protocols
      [efi] Make EFI_DEVICE_PATH_TO_TEXT_PROTOCOL optional
      [efi] Make EFI_HII_DATABASE_PROTOCOL optional
      [efi] Do not try to fetch loaded image device path protocol
      [ipv6] Fix definition of IN6_IS_ADDR_LINKLOCAL()
      [dhcpv6] Do not set sin6_scope_id on the unspecified client socket address
      [ipv6] Do not set sin6_scope_id on source address
      [ipv6] Include network device when transcribing multicast addresses
      [ipv6] Avoid potentially copying from a NULL pointer in ipv6_tx()
      [librm] Allow for the PIC interrupt vector offset to be changed
      [ifmgmt] Do not sleep CPU while configuring network devices
      [scsi] Improve sense code parsing
      [iscsi] Read IPv4 settings only from the relevant network device
      [iscsi] Include IP address origin in iBFT
      [debug] Allow debug message colours to be customised via DBGCOL=...
      [build] Expose build timestamp, build name, and product names
      [efi] Allow device paths to be easily included in debug messages
      [efi] Provide a meaningful EFI SNP device name
      [efi] Restructure EFI driver model
      [build] Fix erroneous object name in version object
      [build] Add yet another potential location for isolinux.bin
      [efi] Allow network devices to be created on top of arbitrary SNP devices
      [autoboot] Allow autoboot device to be identified by link-layer address
      [efi] Identify autoboot device by MAC address when chainloading
      [efi] Attempt to start only drivers claiming support for a device
      [efi] Rewrite SNP NIC driver
      [efi] Include SNP NIC driver within the all-drivers target
      [crypto] Add support for iPAddress subject alternative names
      [crypto] Fix debug message
      [netdevice] Reset network device index when last device is unregistered
      [efi] Update EDK2 headers
      [efi] Install our own disk I/O protocol and claim exclusive use of it
      [efi] Allow for interception of boot services calls by loaded image
      [efi] Print well-known GUIDs by name in debug messages
      [efi] Include EFI_CONSOLE_CONTROL_PROTOCOL header
      [ioapi] Fail ioremap() when attempting to map a zero bus address
      [intel] Check for ioremap() failures
      [realtek] Check for ioremap() failures
      [vmxnet3] Check for ioremap() failures
      [skel] Check for ioremap() failures
      [myson] Check for ioremap() failures
      [natsemi] Check for ioremap() failures
      [i386] Add functions to read and write model-specific registers
      [x86_64] Add functions to read and write model-specific registers
      [efi] Show more diagnostic information when building with DEBUG=efi_wrap
      [ioapi] Centralise notion of PAGE_SIZE
      [lotest] Discard packets arriving on the incorrect network device
      [xen] Import selected public headers
      [xen] Add basic support for PV-HVM domains
      [xen] Add support for Xen netfront virtual NICs
      [efi] Default to releasing network devices for use via SNP
      [efi] Unload started images only on failure
      [efi] Fill in loaded image's DeviceHandle if firmware fails to do so
      [efi] Fix incorrect debug message level when device has no device path
      [efi] Report exact failure when unable to open the device path
      [netdevice] Avoid registering duplicate network devices
      [efi] Ignore failures when attempting to install SNP HII protocol
      [efi] Expand the range of well-known EFI GUIDs in debug messages
      [efi] Provide efi_handle_name() for debugging
      [efi] Add ability to dump all openers of a given protocol on a handle
      [efi] Use efi_handle_name() instead of efi_handle_devpath_text()
      [efi] Use efi_handle_name() instead of efi_devpath_text() where applicable
      [efi] Allow compiler to perform type checks on EFI_HANDLE
      [efi] Avoid unnecessarily passing pointers to EFI_HANDLEs
      [efi] Dump existing openers when we are unable to open a protocol
      [efi] Dump handle information around connect/disconnect attempts
      [efi] Improve debugging of the debugging facilities
      [efi] Add excessive sanity checks into efi_debug functions
      [efi] Also try original ComponentName protocol for retrieving driver names
      [efi] Print raw device path when we have no DevicePathToTextProtocol
      [efi] Add ability to dump SNP device mode information
      [efi] Reset multicast filter list when setting SNP receive filters
      [efi] Provide centralised definitions of commonly-used GUIDs
      [efi] Open device path protocol only at point of use
      [efi] Move abstract device path and handle functions to efi_utils.c
      [efi] Generalise snpnet_pci_info() to efi_locate_device()
      [bios] Support displaying and hiding cursor
      [efi] Support displaying and hiding cursor
      [readline] Ensure cursor is visible when prompting for input
      [xen] Accept alternative Xen platform PCI device ID 5853:0002
      [xen] Use version 1 grant tables by default
      [xen] Cope with unexpected initial backend states
      [smc9000] Avoid using CONFIG as a preprocessor macro
      [build] Allow for named configurations at build time
      [intel] Display PBS value when applying ICH errata workaround
      [intel] Display before and after values for both PBS and PBA
      [intel] Apply PBS/PBA errata workaround only to ICH8 PCI device IDs
      [efi] Add definitions of GUIDs observed during Windows boot
      [efi] Dump details of any calls to our dummy block and disk I/O protocols
      [romprefix] Do not preserve unused register %di
      [build] Remove obsolete references to .zrom build targets
      [build] Allow ISA ROMs to be built
      [build] Avoid deleting config header files if build is interrupted
      [prefix] Halt system without burning CPU if we cannot access the payload
      [prefix] Report both %esi and %ecx when opening payload fails
      [util] Use PCI length field to obtain length of individual images
      [mromprefix] Use PCI length field to obtain length of individual images
      [mromprefix] Allow for .mrom images larger than 128kB
      [efi] Show details of intercepted LoadImage() calls
      [efi] Make our virtual file system case insensitive
      [efi] Wrap any images loaded by our wrapped image
      [efi] Use the SNP protocol instance to match the SNP chainloading device
      [efi] Avoid returning uninitialised data from PCI configuration space reads
      [efi] Make EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL optional
      [efi] Allow for non-PCI snpnet devices
      [build] Clean up all binary directories on "make [very]clean"
      [efi] Add efifatbin utility
      [efi] Provide dummy device path in efi_image_probe()
      [dhcp] Check for matching chaddr in received DHCP packets
      [dhcp] Remove obsolete dhcp_chaddr() function
      [build] Use -malign-double to build 32-bit UEFI binaries
      [efi] Centralise definitions of more protocol GUIDs
      [efi] Add definitions of GUIDs observed when chainloading from Intel driver
      [efi] Free transmit ring entry before calling netdev_tx_complete()
      [efi] Generalise snpnet_dev_info() to efi_device_info()
      [efi] Update to current EDK2 headers
      [efi] Add NII / UNDI driver
      [efi] Check for presence of UNDI in NII protocol
      [efi] Include NII driver within "snp" and "snponly" build targets
      [ping] Report timed-out pings via the callback function
      [ping] Allow termination after a specified number of packets
      [ping] Allow "ping" command output to be inhibited
      [intel] Use autoloaded MAC address instead of EEPROM MAC address
      [crypto] Fix parsing of OCSP responder ID key hash
      [vmxnet3] Add profiling code to exclude time spent in the hypervisor
      [netdevice] Fix erroneous use of free(iobuf) instead of free_iob(iobuf)
      [libc] Add ASSERTED macro to test if any assertion has triggered
      [list] Add sanity checks after list-adding functions
      [malloc] Tidy up debug output
      [malloc] Sanity check parameters to alloc_memblock() and free_memblock()
      [malloc] Check integrity of free list
      [malloc] Report caller address as soon as memory corruption is detected

Peter Lemenkov (1):
      [build] Check if git index actually exists

Robin Smidsrød (2):
      [build] Add named configuration for VirtualBox
      [build] Avoid using embedded script in VirtualBox named configuration

Sven Ulland (1):
      [lacp] Set "aggregatable" flag in response LACPDU

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-17 14:11:39 +01:00
Paolo Bonzini 269e235849 linuxboot: fix loading old kernels
Old kernels that used high memory only allowed the initrd to be in the
first 896MB of memory.  If you load the initrd above, they complain
that "initrd extends beyond end of memory".

In order to fix this, while not breaking machines with small amounts
of memory fixed by cdebec5 (linuxboot: compute initrd loading address,
2014-10-06), we need to distinguish two cases.  If pc.c placed the
initrd at end of memory, use the new algorithm based on the e801
memory map.  If instead pc.c placed the initrd at the maximum address
specified by the bzImage, leave it there.

The only interesting part is that the low-memory info block is now
loaded very early, in real mode, and thus the 32-bit address has
to be converted into a real mode segment.  The initrd address is
also patched in the info block before entering real mode, it is
simpler that way.

This fixes booting the RHEL4.8 32-bit installation image with 1GB
of RAM.

Cc: qemu-stable@nongnu.org
Cc: mst@redhat.com
Cc: jsnow@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 12:21:03 +01:00
Mark Cave-Ayland 35fb5b73a2 Update OpenBIOS images
Update OpenBIOS images to SVN r1327 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-11-15 13:01:44 +00:00
Peter Maydell b56cb28895 update seabios to 1.7.5.1 stable release
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJUZI/pAAoJEEy22O7T6HE4LnkP/2u8CshWYlB22PuwJzmvyP+4
 8fXLK405O+kFAoVWzexwqyUsbUnfAUb2hhzzYexOQmZj+r0zjNKZI96Ys8g2xJCP
 acDfK4dv8cdFn/5UouC4Z67LAo7r/4NZT9+4txCv7I4N55Rl+vutB8sKnCsYcLgy
 6Jw1Gv7/fF6o2IepJGKUvf5B91MrTNKiRUw6uWJMaoMTJ3875OHI176JPernt+p2
 33IDV2KujFvvuQ3WbedHx2005zYBKVd1mgNnqT2DAZ0KFuGRXPUD/pT2QpRX7H2F
 eWrht6+rbvVaVMqW9i6RqoD5hG+7pZsLlrYA7quY55utc8HewmvzmLEjhxnpjQKE
 1IF0sjL7GLucW7I5aCOYJDaYmqwVd1ttNMOM4q78GGL/4cuO5ou2pPLy7hCos9r8
 m1k+hxKnF4gZBXaHlP9hPeNuC4UHzhKf694iH0frvIgsIecHmES1P8gnxeSxsp2D
 GGneF5BFx2EK+0JpYyC5sW2hTZxHatdDa5g91YIZruc80DoFoUhXFdJ4OMZMcHBJ
 4VHTVuS9afcstRw/9ImS8lFmIRrf/h4RTMy+3mgSVRbP9DT9KSRaL4uqt+z8Gxay
 Tgu/LgiPY+g/h+dOigsQXuWAU0FfJPgA3pzgHhY88Je5AC93zgLTNPRgKrUgb/a7
 khDTBPZTNHRPtRVQsA5P
 =cRkt
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-seabios-1.7.5.1-20141113-1' into staging

update seabios to 1.7.5.1 stable release

# gpg: Signature made Thu 13 Nov 2014 11:03:05 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-seabios-1.7.5.1-20141113-1:
  update seabios to 1.7.5.1 stable release

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-13 13:02:31 +00:00
Gerd Hoffmann 953ea14d66 update seabios to 1.7.5.1 stable release
git shortlog since 1.7.5:

Hannes Reinecke (1):
      megasas: read addional PCI I/O bar

Kevin O'Connor (5):
      boot: Change ":rom%d" boot order rom instance to ":rom%x"
      vgabios: Return from handle_1011() if handler found.
      Don't enable thread preemption during S3 resume vga option rom execution.
      build: Avoid absolute paths during "whole-program" compiling.
      ehci: Fix bug in hub port assignment

Marcel Apfelbaum (1):
      hw/pci: reserve IO and mem for pci express downstream ports with no devices attached

Markus Armbruster (1):
      boot: Fix boot order for SCSI target, lun > 9

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-13 11:59:46 +01:00
Peter Maydell 776346cd63 trivial patches for 2014-11-11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJUYh9vAAoJEL7lnXSkw9fbgPQH/065L5+SpaJR1Nte9Lz3N2s1
 a6tGSI22yu85tKvYCdYjeoVHSkSTyR57FdTfUd2xc2QPj+J4sWXpA81KILBGTJUp
 NMpmLpWg4LOh8Ek4ViRgmFFdryzIFa4dT4gc1AcSAIAQ6jsgK1dM7m5kfncC3TN0
 TUs248vJ2i/DaE0k8TOeJqxJTqInoFttlJEqG7RD+V5JznokE4zpFNXHDGx9BptE
 W2J38GJ/TKRPe9UrHMKZI1r6+ZBdXyE/CaqsNNKLJdqrHgSQuAyK/PS6dQbM4BLg
 M1qdP7Tp0wOlvv9qoEZMOEiUsi54XPqLgaLMbW74Yp5X459fqmLW2imy49pHXt8=
 =klsW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-11' into staging

trivial patches for 2014-11-11

# gpg: Signature made Tue 11 Nov 2014 14:38:39 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2014-11-11:
  block: Fix comment for bdrv_co_get_block_status
  sysbus: Correct SYSTEM_BUS(obj) defines
  target-i386: cpu: keeping function parameters alignment on new line
  xen-hvm: Remove redundant variable 'xstate'
  coroutine-sigaltstack: Change jmp_buf to sigjmp_buf
  pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
  gdbstub: Add a missing case of signal number translation in gdbstub
  numa: make 'info numa' take into account hotplugged memory
  slirp/smbd: modify/set several parameters in generated smbd.conf
  qemu-doc.texi: fix typos in x509 examples
  icc_bus: fix typo ICC_BRIGDE -> ICC_BRIDGE

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-11 14:50:10 +00:00
Chen Gang c21fd2c79e pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
For Linux upstream kernel (e.g. 3.17-rc7), the related compatible string
'xlnx,xps-ethernetlite-2.00.a' is supported, but 'b' is not supported,
so change qemu dtb file to match kernel driver.

The related operation for qemu (after this patch):

   yum install libvirt
   yum install tunctl
   tunctl -b
   ip link set tap0 up
   brctl addif virbr0 tap0

   ./configure
   make
   ./microblaze-softmmu/qemu-system-microblaze -M petalogix-s3adsp1800 \
     -kernel ../linux-stable.microblaze/arch/microblaze/boot/linux.bin \
     -no-reboot -append "console=ttyUL0,115200 doreboot" -nographic \
     -net nic,vlan=0,model=xlnx.xps-ethernetlite,macaddr=00:16:35:AF:94:00 \
     -net tap,vlan=0,ifname=tap0,script=no,downscript=no

   in microblaze qemu bash (guest machine):

     ifconfig eth0 add 192.168.122.2 netmask 255.255.255.0
     ifconfig eth0 up

   Then can telnet 192.168.122.2 directly without password from the host
   machine.

The related operation for generating new dtb:

   building Linux kernel firstly, then get dts tool "./scripts/dts/dts".
   "./scripts/dtc/dtc -I dtb -O dts  -o ../work.dts ../qemu/petalogix-s3adsp1800.dtb"
   edit work.dts (replace 'xlnx,xps-ethernetlite-2.00.b')
   "./scripts/dtc/dtc -I dts -O dtb  -o ..qemu/petalogix-s3adsp1800.dtb ../work.dts"

(Since I am not quite sure whether can read this patch or not, I put the
related dtb file in attachment, please check, thanks).

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-11-11 09:04:13 +03:00
Mark Cave-Ayland e3b561be48 Update OpenBIOS images
Update OpenBIOS images to SVN r1321 built from submodule.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-11-04 00:02:33 +00:00
Paolo Bonzini cdebec5e40 linuxboot: compute initrd loading address
Even though hw/i386/pc.c tries to compute a valid loading address for the
initrd, close to the top of RAM, this does not take into account other
data that is malloced into that memory by SeaBIOS.

Luckily we can easily look at the memory map to find out how much memory is
used up there.  This patch places the initrd in the first four gigabytes,
below the first hole (as returned by INT 15h, AX=e801h).

Without this patch:
[    0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[    0.000000] RAMDISK: [mem 0x0710a000-0x07fd7fff]

With this patch:
[    0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[    0.000000] RAMDISK: [mem 0x07112000-0x07fdffff]

So linuxboot is able to use the 64k that were added as padding for
QEMU <= 2.1.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-09 15:36:15 +02:00