This reverts commit a9bd83f4c65de0058659ede009fa1a241f379edd.
This counting approach is not robust against setting a bit that
was already set, or clearing a bit that was already clear. Perhaps
that is considered a bug, but besides the lack of any documentation
for that restriction, it's a pretty unpleasant way for the problem
to manifest itself.
It could be made more robust by testing the current value of the
bit before changing the count, but a later patch speeds up IRQ_check
in all cases, not just when there's nothing pending. Hopefully that
should be adequate to address performance concerns.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Previously the code relied on the queue's "next" field getting
set to -1 sometime between an update to the bitmap, and the next
call to IRQ_get_next. Sometimes this happened after the update.
Sometimes it happened before the check. Sometimes it didn't happen
at all.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Other priorities are signed, so avoid comparisons between
signed and unsigned.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Critical interrupts on FSL MPIC are not supposed to pay
attention to priority, IACK, EOI, etc. On the currently modeled
version it's not supposed to pay attention to the mask bit either.
Also reorganize to make it easier to implement newer FSL MPIC models,
which encode interrupt level information differently and support
mcheck as well as crit, and to reduce problems for later patches
in this set.
Still missing is the ability to lower the CINT signal to the core,
as IACK/EOI is not used. This will come with general IRQ-source-driven
lowering in the next patch.
New state is added which is not serialized, but instead is recomputed
in openpic_load() by calling the appropriate write_IRQreg function.
This should have the side effect of causing the IRQ outputs to be
raised appropriately on load, which was missing.
The serialization format is altered by swapping ivpr and idr (we'd like
IDR to be restored before we run the IVPR logic), and moving interrupts
to the end (so that other state has been restored by the time we run the
IDR/IVPR logic. Serialization for this driver is not yet in a state
where backwards compatibility is reasonable (assuming it works at all),
and the current serialization format was not built for extensibility.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: fix for current code state]
Signed-off-by: Alexander Graf <agraf@suse.de>
The base openpic specification doesn't provide abbreviated register
names, so it's somewhat understandable that the QEMU code made up
its own, except that most of the names that QEMU used didn't correspond
to the terminology used by any implementation I could find.
In some cases, like PCTP, the phrase "processor current task priority"
could be found in the openpic spec when describing the concept, but
the register itself was labelled "current task priority register"
and every implementation seems to use either CTPR or the full phrase.
In other cases, individual implementations disagree on what to call
the register. The implementations I have documentation for are
Freescale, Raven (MCP750), and IBM. The Raven docs tend to not use
abbreviations at all. The IBM MPIC isn't implemented in QEMU. Thus,
where there's disagreement I chose to use the Freescale abbreviations.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: rebase on current state of the code]
Signed-off-by: Alexander Graf <agraf@suse.de>
This will stop things from breaking once it's properly treated as a
level-triggered interrupt. Note that it's the MPIC's MSI cascade
interrupts that are level-triggered; the individual MSIs are
edge-triggered.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix various format errors when debug prints are enabled. Also
cause error checking to happen even when debug prints are not
enabled, and consistently use 0x for hex output.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: adjust for more recent code base, prettify DPRINTF macro]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch install the timer reset handler. This will be called when
the guest is reset.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: adjust for QOM'ification]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch fixes the following coding style violations:
- structs have to be typedef and be CamelCase
- if()s are always surrounded by curly braces
Signed-off-by: Alexander Graf <agraf@suse.de>
If we access a register via the QEMU memory inspection commands (e.g.
"xp") rather than from guest code, we won't have a CPU context.
Gracefully fail to access the register in that case, rather than
crashing.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
"opp->nb_irqs-1" would have been a minor coding style error,
but putting in one space but not the other makes it look
confusingly like a numeric literal "-1".
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It's in the address range that normally contains a magic redirection
to the CPU-specific region of the curretn CPU, but it isn't actually
a per-CPU register. On real hardware BRR1 shows up only at 0x40000,
not at 0x60000 or other non-magic per-CPU areas. Plus, this makes
it possible to read the register on the QEMU command line with "xp".
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Previously only the spurious vector was sized appropriately
to the openpic model.
Also, instances of "IPVP_VECTOR(opp->spve)" were replace with
just "opp->spve", as opp->spve is already just a vector and not
an IVPR.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
I could not find this register in any spec (FSL, IBM, or OpenPIC)
and the code doesn't do anything with it but initialize, save,
or restore it.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Deefine symbolic names for some register bits, and use some that
have already been defined.
Also convert some register values from hex to decimal when it improves
readability.
IPVP_PRIORITY_MASK is corrected from (0x1F << 16) to (0xF << 16), in
conjunction with making wider use of the symbolic name. I looked at
Freescale and IBM MPIC docs and at the base OpenPIC spec, and all three
had priority as 4 bits rather than 5. Plus, the magic nubmer that is
being replaced with symbolic values treated the field as 4 bits wide.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add EHCI USB host controller to exynos4210.
Signed-off-by: Liming Wang <walimisdev@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It uses a different capsbase and opregbase than the Xilinx device.
Signed-off-by: Liming Wang <walimisdev@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows specific derived models to use different values.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SysBus EHCI was introduced in a hurry before 1.3 Soft Freeze.
To use QOM casts in place of DO_UPCAST() / FROM_SYSBUS(), we need an
identifying type. Introduce generic abstract base types for PCI and
SysBus EHCI to allow multiple types to access the shared fields.
While at it, move the state structs being amended with macros to the
header file so that they can be embedded.
The VMSTATE_PCI_DEVICE() macro does not play nice with the QOM
parent_obj naming convention, so defer that cleanup.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Due to the way devices are addressed with xhci (done by hardware, not
the guest os) there is no packet when invoking the set-address control
request. Create a dummy packet in that case to avoid null pointer
dereferences.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The xhci-hcd may submit bulk transfers > 65535 bytes even when not using
bulk-in pipeling, so usbredir can only be used in combination with an xhci
hcd if the client has the 32 bits bulk length capability.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To ensure that interrupt receiving is properly stopped when the guest is
no longer interested in an interrupt endpoint.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some usb devices (host or network redirection) can benefit from knowing when
the guest stops using an endpoint. Redirection may involve submitting packets
independently from the guest (in combination with a fifo buffer between the
redirection code and the guest), to ensure that buffers of the real usb device
are timely emptied. This is done for example for isoc traffic and for interrupt
input endpoints. But when the (re)submission of packets is done by the device
code, then how does it know when to stop this?
For isoc endpoints this is handled by detecting a set interface (change alt
setting) command, which works well for isoc endpoints. But for interrupt
endpoints currently the redirection code never stops receiving data from
the device, which is less then ideal.
However the controller emulation is aware when a guest looses interest, as
then the qh for the endpoint gets unlinked (ehci, ohci, uhci) or the endpoint
is explicitly stopped (xhci). This patch adds a new ep_stopped USBDevice
method and modifies the hcd code to call this on queue unlink / ep stop.
This makes it possible for the redirection code to properly stop receiving
interrupt input (*) data when the guest no longer has interest in it.
*) And in the future also buffered bulk input.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_ep_find_packet_by_id mistakenly only checks the first packet and if that
is not a match, keeps trying the first packet! This patch fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This leads to cleaner code in usb-hid, and removes up to a 1000 calls / sec to
qemu_get_clock_ns(vm_clock) if idle-time is set to its default value of 0.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If somehow we've gotten behind a lot, simply skip ahead, like the ehci code
does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before this patch uhci would process an unlimited amount of frames when
behind on schedule, by setting the timer to a time already past, causing the
timer subsys to immediately recall the frame_timer function gain.
This would cause invalid cancellations of bulk queues when the catching up
processed more then 32 frames at a moment when the bulk qh was temporarily
unlinked (which the Linux uhci driver does).
This patch fixes this by processing maximum 16 frames in one go, and always
setting the timer one ms later, making the code behave more like the ehci
code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rather then using the magic 32 value in various places.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Re-arrange how we process frames / increase frnum / report pending interrupts,
to avoid a 1 ms delay in interrupt reporting to the guest. This increases
the packet throughput for cases where the guest submits a single packet,
then waits for its completion then re-submits from 500 pkts / sec to
1000 pkts / sec. This impacts for example the use of redirected / virtual
usb to serial convertors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci_raise_irq(s, USBSTS_PCD), gets applied immediately so there is no need
to call commit_irq after it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I tried lowering the time between raising an interrupt and rescanning the
async schedule to see if the guest has queued a new transfer before, but
that did not have any positive effect. I now believe the cause for this is
that lowering this time made it more likely to hit the 1 ms interrupt
threshold penalty for the next packet, as described in my
"ehci: Use uframe precision for interrupt threshold checking" commit.
Now that we do interrupt threshold handling with uframe precision, futher
lowering this time from .5 to .25 ms gives an extra 15% improvement in speed
(MB/s) reading from a simple USB-2.0 thumb-drive.
While at it also properly set the int_req_by_async flag for short packet
completions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before this patch, the following could happen:
1) Transfer completes, raises interrupt
2) .5 ms later we check if the guest has queued up any new transfers
3) We find and execute a new transfer
4) .2 ms later the new transfer completes
5) We re-run our frame_timer to write back the completion, but less then
1 ms has passed since our last run, so frindex is not changed, so the
interrupt threshold code delays the interrupt
6) 1 ms from the re-run our frame-timer runs again and finally delivers
the interrupt
This leads to unnecessary large delays of interrupts, this code fixes this
by changing frindex to uframe precision and using that for interrupt threshold
control, making the interrupt fire at step 5 for guest which have low interrupt
threshold settings (like Linux).
Note that the guest still sees the frindex move in steps of 8 for migration
compatibility.
This boosts Linux read speed of a simple cheap USB thumb drive by 6 %.
Changes in v2:
-Make the guest see frindex move in steps of 8 by modifying ehci_opreg_read,
rather then using a shadow variable
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci_fill_queue assumes that there is a one on one relationship between an ep
and a qh, this patch adds a check to ensure this.
Note I don't expect this to ever trigger, this is just something I noticed
the guest might do while working on other stuff. The only way this check can
trigger is if a guest mixes in and out qtd-s in a single qh for a non
control ep.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove the short-circuiting of fetchqtd in fetchqh, so that the
qtd gets properly verified before completing the transaction.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is not allowed, except for clearing active on cancellation, so don't
warn when the new token does not have its active bit set.
This unifies the cancellation path for modified qtd-s, and prepares
ehci_verify_qtd to be used ad an extra check inside
ehci_writeback_async_complete_packet().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also drop the warning printf, which was there mainly because this was an
untested code path (as the previous bug fixes to it show), but that no
longer is the case now :)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A device reset does not affect the link state, only set_link does.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit b9d03e352c added link
auto-negotiation emulation, it would always set link up by
callback function. Problem exists if original link status
was down, link status should not be changed in auto-negotiation.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Discard packets longer than 16384 when !SBP to match the hardware behavior.
Signed-off-by: Michael Contreras <michael@inetric.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pc-testdev.c cannot be compiled with MinGW (and other non POSIX hosts):
CC i386-softmmu/hw/i386/../pc-testdev.o
qemu/hw/i386/../pc-testdev.c:38:22: warning: sys/mman.h: file not found
qemu/hw/i386/../pc-testdev.c: In function ‘test_flush_page’:
qemu/hw/i386/../pc-testdev.c:103: warning: implicit declaration of function ‘mprotect’
...
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This typically reduces the size from 512 bytes to 128 bytes.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sys/mman.h is not needed (tested on Linux) and unavailable for MinGW,
so remove it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pc_fw_add_pflash_drv() ignores qemu_find_file() failure, and happily
creates a drive without a medium.
When pc_system_flash_init() asks for its size, bdrv_getlength() fails
with -ENOMEDIUM, which isn't checked either. It fails relatively
cleanly only because -ENOMEDIUM isn't a multiple of 4096:
$ qemu-system-x86_64 -S -vnc :0 -bios nonexistant
qemu: PC system firmware (pflash) must be a multiple of 0x1000
[Exit 1 ]
Fix by handling the qemu_find_file() failure.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prehistoric leftover, zap it. We poweroff via acpi these days.
And having a port (0x501,0x502) where any random guest write will make
qemu exit -- with no way to turn it off -- is a bad joke anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a test device which supports the kvmctl ioports,
so one can run the KVM unittest suite.
Intended Usage:
qemu-system-x86_64 -nographic \
-device pc-testdev \
-device isa-debug-exit,iobase=0xf4,iosize=0x04 \
-kernel /path/to/kvm/unittests/msr.flat
Where msr.flat is one of the KVM unittests, present on a
separate repo,
git://git.kernel.org/pub/scm/virt/kvm/kvm-unit-tests.git
[ kraxel: more memory api + qom fixes ]
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When present it makes qemu exit on any write.
Mapped to port 0x501 by default.
Without this patch Anthony doesn't allow me to
remove the bochs bios debug ports because his
test suite uses this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The hw/dataplane/vring.c code includes linux/virtio_ring.h. Ensure that
we use linux-headers/ instead of the system-wide headers, which may be
out-of-date on older distros.
This resolves the following build error on Debian 6:
CC hw/dataplane/vring.o
cc1: warnings being treated as errors
hw/dataplane/vring.c: In function 'vring_enable_notification':
hw/dataplane/vring.c:71: error: implicit declaration of function 'vring_avail_event'
hw/dataplane/vring.c:71: error: nested extern declaration of 'vring_avail_event'
hw/dataplane/vring.c:71: error: lvalue required as left operand of assignment
Note that we now build dataplane/ for each target instead of only once.
There is no way around this since linux-headers/ is only available for
per-target objects - and it's how virtio, vfio, kvm, and friends are
built.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, all unknown requests are treated as VIRTIO_BLK_T_IN
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-blk-data-plane feature is easy to integrate into
hw/virtio-blk.c. The data plane can be started and stopped similar to
vhost-net.
Users can take advantage of the virtio-blk-data-plane feature using the
new -device virtio-blk-pci,x-data-plane=on property.
The x-data-plane name was chosen because at this stage the feature is
experimental and likely to see changes in the future.
If the VM configuration does not support virtio-blk-data-plane an error
message is printed. Although we could fall back to regular virtio-blk,
I prefer the explicit approach since it prompts the user to fix their
configuration if they want the performance benefit of
virtio-blk-data-plane.
Limitations:
* Only format=raw is supported
* Live migration is not supported
* Block jobs, hot unplug, and other operations fail with -EBUSY
* I/O throttling limits are ignored
* Only Linux hosts are supported due to Linux AIO usage
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-blk-data-plane is a subset implementation of virtio-blk. It only
handles read, write, and flush requests. It does this using a dedicated
thread that executes an epoll(2)-based event loop and processes I/O
using Linux AIO.
This approach performs very well but can be used for raw image files
only. The number of IOPS achieved has been reported to be several times
higher than the existing virtio-blk implementation.
Eventually it should be possible to unify virtio-blk-data-plane with the
main body of QEMU code once the block layer and hardware emulation is
able to run outside the global mutex.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Two slightly different versions of a patch to conditionally set
VIRTIO_BLK_F_CONFIG_WCE through the "config-wce" qdev property have been
applied (ea776abca and eec7f96c2). David Gibson
<david@gibson.dropbear.id.au> noticed that the "config-wce"
property is broken as a result and fixed it recently.
The fix sets the host_features VIRTIO_BLK_F_CONFIG_WCE bit from a qdev
property. Unfortunately, the virtio device then has no chance to test
for the presence of the feature bit during virtio_blk_init().
Therefore, reinstate the VirtIOBlkConf->config_wce flag. Drop the
duplicate qdev property to set the host_features bit. The
VirtIOBlkConf->config_wce flag will be used by virtio-blk-data-plane in
a later patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The IOQueue has a pool of iocb structs and a function to add new
read/write requests. Multiple requests can be added before calling the
submit function to actually tell the host kernel to begin I/O. This
allows callers to batch requests and submit them in one go.
The actual I/O is performed using Linux AIO.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Outside the safety of the global mutex we need to poll on file
descriptors. I found epoll(2) is a convenient way to do that, although
other options could replace this module in the future (such as an
AioContext-based loop or glib's GMainLoop).
One important feature of this small event loop implementation is that
the loop can be terminated in a thread-safe way. This allows QEMU to
stop the data plane thread cleanly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-blk-data-plane cannot access memory using the usual QEMU
functions since it executes outside the global mutex and the memory APIs
are this time are not thread-safe.
This patch introduces a virtqueue module based on the kernel's vhost
vring code. The trick is that we map guest memory ahead of time and
access it cheaply outside the global mutex.
Once the hardware emulation code can execute outside the global mutex it
will be possible to drop this code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The data plane thread needs to map guest physical addresses to host
pointers. Normally this is done with cpu_physical_memory_map() but the
function assumes the global mutex is held. The data plane thread does
not touch the global mutex and therefore needs a thread-safe memory
mapping mechanism.
Hostmem registers a MemoryListener similar to how vhost collects and
pushes memory region information into the kernel. There is a
fine-grained lock on the regions list which is held during lookup and
when installing a new regions list.
When the physical memory map changes the MemoryListener callbacks are
invoked. They build up a new list of memory regions which is finally
installed when the list has been completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This optimizes MSIX handling in virtio-pci.
Also included is pci express capability bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJQ2tD2AAoJECgfDbjSjVRpUNcIAKN2c+3iiutUWFBBII2TWppc
QAQ4Q5HK7gCtAnwNrlQMAIXcUzHBd5s6BW74BaFBZYymf/tqe4CsvmIH15qQyvm0
McdJAba3FLk0+TELG/Fmf4+faM/kr3gl5Cve3YJC69NHpcq3gi8V4696sP8cGfUt
atA+NR8AITBJDmQlcq6Vwfp+t+B1MY9D9SROT/BmfO+/kY3krkhlPL2pdcoinBa2
zKJLz+jE0tjz7kZ99bmbb2uzKImvtFwxCVZjhD0UINjDOWd9k6ao2pWQIEftv56z
zwz/L8TKCFdM2350XXPg99f4WbrvBqmg3Slb4vrsIYEuAWvArI8sUSYG3rC4fS4=
=8Jun
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,virtio
This optimizes MSIX handling in virtio-pci.
Also included is pci express capability bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* mst/tags/for_anthony:
virtio-pci: don't poll masked vectors
msix: expose access to masked/pending state
msi: add API to get notified about pending bit poll
pcie: Fix bug in pcie_ext_cap_set_next
virtio: make bindings typesafe
There are several ARM and MIPS boards which are manufactured with
either Intel (pflash_cfi01.c) or AMD (pflash_cfi02.c) flash memory.
The Linux kernel supports both and first probes for AMD flash which
resulted in one or two warnings from the Intel flash emulation:
pflash_write: Unimplemented flash cmd sequence (offset 0000000000000000, wcycle 0x0 cmd 0x0 value 0xf000f0)
pflash_write: Unimplemented flash cmd sequence (offset 0000000000000000, wcycle 0x0 cmd 0x0 value 0xf0)
These warnings confuse users, so suppress them.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'qom-cpu' of git://repo.or.cz/qemu/afaerber:
MAINTAINERS: Include X86CPU in CPU maintenance area
cpu: Move kvm_run into CPUState
cpu: Move kvm_state field into CPUState
ppc_booke: Pass PowerPCCPU to ppc_booke_timers_init()
ppc4xx_devs: Return PowerPCCPU from ppc4xx_init()
ppc_booke: Pass PowerPCCPU to {decr,fit,wdt} timer callbacks
ppc: Pass PowerPCCPU to [h]decr timer callbacks
ppc: Pass PowerPCCPU to [h]decr callbacks
ppc: Pass PowerPCCPU to ppc_set_irq()
kvm: Pass CPUState to kvm_vcpu_ioctl()
kvm: Pass CPUState to kvm_arch_*
cpu: Move kvm_fd into CPUState
qdev-properties.c: Separate core from the code used only by qemu-system-*
qdev: Coding style fixes
cpu: Introduce CPUListState struct
target-alpha: Add support for -cpu ?
target-alpha: Turn CPU definitions into subclasses
target-alpha: Avoid leaking the alarm timer over reset
alpha: Pass AlphaCPU array to Typhoon
target-alpha: Let cpu_alpha_init() return AlphaCPU
At the moment, when irqfd is in use but a vector is masked,
qemu will poll it and handle vector masks in userspace.
Since almost no one ever looks at the pending bits,
it is better to defer this until pending bits
are actually read.
Implement this optimization using the new poll notifier.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Upper 16 bits of the PCIe Extended Capability Header was truncated during update,
also breaking pcie_add_capability.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable 64 bits bar emulation.
Test pass with the current seabios which already support 64bit pci bars.
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
* Define enum for TMP105 registers
* Move tmp105_set() from I2C to TMP105 header
* Document units and range of temperature as preconditions
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move bindings from opaque to DeviceState.
This gives us better type safety with no performance cost.
Add macros to make future QOM work easier.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This separates the qdev properties code in two parts:
- qdev-properties.c, that contains most of the qdev properties code;
- qdev-properties-system.c for code specific for qemu-system-*,
containing:
- Property types: drive, chr, netdev, vlan, that depend on code that
won't be included on *-user
- qemu_add_globals(), that depends on qemu-config.o.
This change should help on two things:
- Allowing DeviceState to be used by *-user without pulling
dependencies that are specific for qemu-system-*;
- Writing qdev unit tests without pulling too many dependencies.
The copyright/license of qdev-properties.c isn't explicitly stated at
the file, so add a simple copyright/license header pointing to the
commit ID of the original file.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed. Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Touching char/char.h basically causes the whole of QEMU to
be rebuilt. Avoid this, it is usually unnecessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!). Clean this up, and also
add missing inclusions of qemu-char.h itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the timer from CPUAlphaState to AlphaCPU to avoid the pointer being
zero'ed once we implement reset. Would cause a segfault in
sys_helper.c:helper_set_alarm().
This also simplifies timer initialization in Typhoon.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Richard Henderson <rth@twiddle.net>
* stefanha/trivial-patches:
configure: Earlier pkg-config probe
vmmouse_reset(): remove minimal code duplication
linux-user/syscall.c: remove wrong forward decl of setgroups()
fix build error on ARM due to wrong glibc check
gitignore: Add virtfs-proxy-helper
arm_gic: Add cpu nr to Raised IRQ message
zynq_slcr: Compile time warning fixes.
pflash_cfi0x: Send debug messages to stderr
pflash_cfi01: qemu_log_mask "unimplemented" msg
net, hub: fix the indent in the comments
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* amit/master:
virtio-serial-bus: assert port is non-null in remove_port()
virtio-serial-bus: send_control_msg() should not deal with cpkts
virtio-serial: delete timer if active during exit
virtio-serial: allocate post_load only at load-time
virtio-serial: move active ports loading to separate function
virtio-serial: use uint32_t to count ports
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* spice/spice.v66:
docs: add spice-port-fqdn.txt
spice-qemu-char: register spicevmc ports during qemu_spice_init()
spice-qemu-char: keep a list of spice chardev
spice-qemu-char: add spiceport chardev
spice-qemu-char: factor out CharDriverState creation
spice-qemu-char: write to chardev whatever amount it can read
qxl+vnc: register a vm state change handler for dummy spice_server
qxl: save qemu_create_displaysurface_from result
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 069ab0eb added a vmmouse_disable() call to vmmouse_reset().
vmmouse_disable() resets the status already.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the relevant CPU nr to this debug message to make IRQ debugging more
informative.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Few warnings when compiled with debug printfs enabled. Fixed all.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These debug info messages should go to stderr rather than stdout.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This printf is informing the user of unimplemented functionality. It should be
re-directed to qemu_log(LOG_UNIMP, ...) accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
remove_port() is called from qdev's unplug callback, and we're certain
the port will be found in our list of ports. Adding an assert()
documents this.
This was flagged by Coverity, fix suggested by Markus.
CC: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Stuff the cpkt before calling send_control_msg(). This function should
not be concerned about contents of the buffer it receives.
A few code refactorings recently have made making this change easier
than earlier.
Coverity and clang have flagged this code several times in the past
(cpkt->id not set before send_control_event() passed it on to
send_control_msg()). This will finally eliminate the false-positive.
CC: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This patch corresponds to commit
840184a106bc24e745beda5c77e392f6cecd2bc9 from
git://xenbits.xensource.com/qemu-xen-unstable.git.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
There are lots of external users of pci_internals.h,
apparently making it an internal interface only didn't
work out. Let's stop pretending it's an internal header.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 475d67c3bcd6ba9fef917b6e59d96ae69eb1a9b4.
Now that all users have been updated, we don't need the
makefile hack or the softlink anymore.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Include dependencies from pci core using the correct path.
This is required now that it's in the separate directory.
Need to check whether they can be minimized, for now,
keep the code as is.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Refactor common code around calls to cpu_restore_state().
tb_find_pc() has now no external users, make it static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (40 commits)
pseries: Increase default NVRAM size
target-ppc: Don't use hwaddr to represent hardware state
PPC: e500: pci: Export slot2irq calculation
PPC: E500plat: Make a lot of PCI slots available
PPC: E500: Move PCI slot information into params
PPC: E500: Generate dt pci irq map dynamically
PPC: E500: PCI: Make IRQ calculation more generic
PPC: E500: PCI: Make first slot qdev settable
openpic: Accelerate pending irq search
openpic: fix minor coding style issues
MSI-X: Fix endianness
PPC: e500: Declare pci bridge as bridge
PPC: e500: Add MSI support
openpic: add Shared MSI support
openpic: make brr1 model specific
openpic: convert to qdev
openpic: remove irq_out
openpic: rename openpic_t to OpenPICState
openpic: convert simple reg operations to builtin bitops
openpic: remove unused type variable
...
This patch adds an x argument to qemu_pixman_linebuf_fill so it can
also be used to convert a partial scanline. Then fix tight + png/jpeg
encoding by passing in the x+y offset, so the data is read from the
correct screen location instead of the upper left corner.
Cc: 1087974@bugs.launchpad.net
Cc: qemu-stable@nongnu.org
Reported-by: Tim Hardeneck <thardeck@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If no image file for NVRAM is specified, the pseries machine currently
creates a 16K non-persistent NVRAM by default. This basically works, but
is not large enough for current firmware and guest kernels to create all
the NVRAM partitions they would like to. Increasing the default size to
64K addresses this and stops the guest generating error messages.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
We need the calculation method to get from a PCI slot ID to its respective
interrupt line twice. Once in the internal map function and once when
assembling the device tree.
So let's extract the calculation to a separate function that can be called
by both users.
Signed-off-by: Alexander Graf <agraf@suse.de>
The ppce500 machine doesn't have to stick to hardware limitations,
as it's defined as being fully device tree based.
Thus we can change the initial PCI slot ID to 0x1 which gives us a
whopping 31 PCI devices we can support with this machine now!
Signed-off-by: Alexander Graf <agraf@suse.de>
We have a params struct that allows us to expose differences between
e500 machine models. Include PCI slot information there, so we can have
different machines with different PCI slot topology.
Signed-off-by: Alexander Graf <agraf@suse.de>
Today we're hardcoding the PCI interrupt map in the e500 machine file.
Instead, let's write it dynamically so that different machine types
can have different slot properties.
Signed-off-by: Alexander Graf <agraf@suse.de>
The IRQ line calculation is more or less hardcoded today. Instead, let's
write it as an algorithmic function that theoretically allows an arbitrary
number of PCI slots.
Signed-off-by: Alexander Graf <agraf@suse.de>
Today the first slot id in our e500 pci implementation is hardcoded to
0x11. Keep it there as default, but allow users to change the default to
a different id.
Signed-off-by: Alexander Graf <agraf@suse.de>
When we're done with one interrupt, we need to search for the next pending
interrupt in the queue. This search has grown quite big now that we have
more than 256 possible irq lines.
So let's memorize how many interrupts we have pending in our bitmaps, so
that we can always bail out in the usual case - the one where we're all done.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MSI-X vector tables are usually stored in little endian in memory,
so let's mark the accessors as such.
This fixes MSI-X on e500 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Now that our interrupt controller supports MSIs, let's expose that feature
to the guest through the device tree!
Signed-off-by: Alexander Graf <agraf@suse.de>
The OpenPIC allows MSI access through shared MSI registers. Implement
them for the MPC8544 MPIC, so we can support MSIs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can properly distinguish between openpic model differences,
let's move brr1 out of the raven code path.
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch converts the OpenPIC device to qdev. Along the way it
renames the "openpic" target to "raven" and the "mpic" target to
"fsl_mpic_20", to better reflect the actual models they implement.
This way we have a generic OpenPIC device now that can handle
different flavors of the OpenPIC specification.
Signed-off-by: Alexander Graf <agraf@suse.de>
The current openpic emulation contains half-ready code for bypass mode.
Remove it, so that when someone wants to finish it they can start from a
clean state.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic code has its own bitmap code to access bits inside of a
bitmap. However, that is overkill when we simply want to check for a
bit inside of a uint32_t.
So instead, let's use normal bit masks and C builtin shifts and ands.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic source irqs are carrying around a type indicator that
is never accessed by anything. Remove it.
Signed-off-by: Alexander Graf <agraf@suse.de>
The only difference between the "openpic" and "mpic" memory api subregion
descriptors is the endianness. Unify them as openpic accessors with explicit
endianness markers in their names.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic and mpic reset handlers are almost identical. Combine
them and extract the differences into state variables.
Signed-off-by: Alexander Graf <agraf@suse.de>
The IRQ raise mechanisms of the OpenPIC and MPIC controllers is identical,
just that the MPIC one can also raise critical interrupts.
Combine those two and check for critical raise capability during runtime.
Signed-off-by: Alexander Graf <agraf@suse.de>
The "openpic" controller is currently using one big region and does
subregion dispatching manually. Move this to the memory api.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPIC source irq handler suddenly became identical to the standard
OpenPIC source irq handler. Combine them into the same function.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic code was still using the old mmio memory api. Convert it to
be a generic memory api user and clean up some code that becomes redundant
that way.
Signed-off-by: Alexander Graf <agraf@suse.de>
MPIC interrupt numbers in Linux (device tree) and in QEMU are different,
because QEMU takes the sparseness of the IRQ number space into account.
Remove that cleverness and instead assume a flat number space. This makes
the code easier to understand, because we are actually aligned with Linux
on the view of our worlds.
Signed-off-by: Alexander Graf <agraf@suse.de>
The openpic code had a few WIP bits left that nobody reanimated within
the last few years. Remove that code.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
The PAPR specification requires that every bus or device mediated by the
IOMMU have a unique Logical IO Bus Number (LIOBN). This patch adds a check
to enforce this, which will help catch errors in configuration earlier.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
PCI Root complex have TYPE-1 configuration header while PCI endpoint
have type-0 configuration header. The type-1 configuration header have
a BAR (BAR0). In Freescale PCI controller BAR0 is used for mapping pci
address space to CCSR address space. This can used for 2 purposes: 1)
for MSI interrupt generation 2) Allow CCSR registers access when configured
as PCI endpoint, which I am not sure is a use case with QEMU-KVM guest.
What I observed is that when guest read the size of BAR0 of host controller
configuration header (TYPE1 header) then it always reads it as 0. When
looking into the QEMU hw/ppce500_pci.c, I do not find the PCI controller
device registering BAR0. I do not find any other controller also doing so
may they do not use BAR0.
There are two issues when BAR0 is not there (which I can think of):
1) There should be BAR0 emulated for PCI Root complex (TYPE1 header) and
when reading the size of BAR0, it should give size as per real h/w.
2) Do we need this BAR0 inbound address translation?
When BAR0 is of non-zero size then it will be configured for PCI
address space to local address(CCSR) space translation on inbound access.
The primary use case is for MSI interrupt generation. The device is
configured with an address offsets in PCI address space, which will be
translated to MSI interrupt generation MPIC registers. Currently I do
not understand the MSI interrupt generation mechanism in QEMU and also
IIRC we do not use QEMU MSI interrupt mechanism on e500 guest machines.
But this BAR0 will be used when using MSI on e500.
I can see one more issue, There are ATMUs emulated in hw/ppce500_pci.c,
but i do not see these being used for address translation.
So far that works because pci address space and local address space are 1:1
mapped. BAR0 inbound translation + ATMU translation will complete the address
translation of inbound traffic.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
[agraf: fix double variable assignment w/o read]
Signed-off-by: Alexander Graf <agraf@suse.de>
All devices are also placed under CCSR memory region.
The CCSR memory region is exported to pci device. The MSI interrupt
generation is the main reason to export the CCSR region to PCI device.
This put the requirement to move mpic under CCSR region, but logically
all devices should be under CCSR. So this patch places all emulated
devices under ccsr region.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PAPR specification requires a certain amount of NVRAM, accessed via
RTAS, which we don't currently implement in qemu. This patch addresses
this deficiency, implementing the NVRAM as a VIO device, with some glue to
instantiate it automatically based on a machine option.
The machine option specifies a drive id, which is used to back the NVRAM,
making it persistent. If nothing is specified, the driver instead simply
allocates space for the NVRAM, which will not be persistent
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the XICS irq controller code has a per-irq state structure which
amongst other things includes whether the interrupt is level or message
triggered - this is configured by the platform code, and is not directly
visible to the guest. This leads to a slightly awkward construct at reset
time where we need to reset everything in the state structure _except_ the
lsi/msi flag, which needs to retain the information given at platform init
time.
More importantly this flag will make matching the qemu state to the KVM
state for the upcoming in-kernel XICS implementation more awkward. This
patch, therefore, removes this flag from the per-irq state structure,
instead adding a parallel array giving the lsi/msi configuration per irq.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds tracing / debugging calls to the XICS interrupt controller
implementation used on the pseries machine.
Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Kernel-based RTAS calls will not have a qemu handler, but will
still be registered in qemu in order to be assigned a token
number and appear in the device-tree.
Let's test for the name being NULL rather than the handler
when deciding to skip an entry while building the device-tree
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The kernel will soon be able to service some RTAS calls. However the
choice of tokens will still be up to userspace. To support this have
spapr_rtas_register() return the token that is allocated for an
RTAS call, that allows the calling code to tell the kernel what the
token value is.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the lowest "real" irq number for the XICS irq controller (as
opposed to numbers reserved for IPIs and other special purposes) is
hard coded as 16 in two places - in xics_system_init() and in spapr.c.
As well as being generally bad practice, we're going to need to change this
number soon to fit in with the in-kernel XICS implementation. This patch
adds a #define for this number to avoid future breakage.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently in the reset code for the XICS interrupt controller, we
initialize the pending_priority field to 0 (most favored, by XICS
convention). This is incorrect, since there is no pending interrupt, it
should be set to least favored - 0xff. At the moment our XICS
implementation doesn't get hurt by this edge case, but it does confuse the
upcoming kernel XICS implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
* pmaydell/arm-devs.next:
hw/ds1338.c: Fix handling of DAY (wday) register.
hw/ds1338.c: Implement support for the control register.
hw/ds1338.c: Ensure state is properly initialized.
hw/ds1338.c: Fix handling of HOURS register.
hw/ds1338.c: Add definitions for various flags in the RTC registers.
hw/ds1338.c: Correct bug in conversion to BCD.
exynos4210/mct: Avoid infinite loop on non incremental timers
hw/arm_gic: fix target CPUs affected by set enable/pending ops
xilinx_zynq: Add one variable to avoid overwriting QSPI bus
hw/arm_gic_common: Correct GICC_PMR reset value for newer GICs
hw/arm_gic: Fix comparison with priority mask register
hw/arm_boot, exynos4210, highbank: Fix secondary boot GIC init
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Per the datasheet, the DAY (wday) register is user defined. Implement this.
Signed-off-by: Antoine Mathys <barsamin@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per the datasheet, the mapping between 12 and 24 hours modes is:
0 <-> 12 PM
1-12 <-> 1-12 AM
13-23 <-> 1-11 PM
Signed-off-by: Antoine Mathys <barsamin@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The post_load timer was being freed, but not deleted. This could cause
problems when the timer is armed, but the device is hot-unplugged before
the callback is executed.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This saves us a few bytes in the VirtIOSerial struct. Not a big
savings, but since the entire structure is used only during a short
while after migration, it's helpful to keep the struct cleaner and
smaller.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The virtio_serial_load() function became too big, split the code that
gets the port info from the source into a separate function.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Tray statuses should be also reseted. Some guests may lock the tray
and after reset before any kernel is loaded the tray should be unlocked.
Also if you reset the real computer the tray is closed. We should
do the same in qemu.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To make it easier to move code around without breaking
build at intermedite steps, tweak makefiles
to look in pci/ and hw/ for include files, automatically.
This will be reverted at the end of the reorganization.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cleanup the q35/ich9 license headers.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
We will use qemu_opts_create_nofail function, it can make code
more readable.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Check for a 0 "distance" value to avoid infinite loop when the
expired FCR timer was not programed with auto-increment.
With this change the behavior is coherent with the same type
of code in the exynos4210_gfrc_restart() function in the same
file.
Linux seems to mostly use this timer with auto-increment
which explain why it is not a problem most of the time.
However other OS might have a problem with this if they
don't use the auto-increment feature.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Reviewed-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a bug on the ARM GIC model where interrupts are not
set pending on the correct target CPUs when they are
triggered by writes to the Interrupt Set Enable or
Set Pending registers.
Signed-off-by: Daniel Sangorrin <dsl@ertl.jp>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit 7b482bcf xilinx_zynq: added QSPI controller
Adds one QSPI controller, which has two spi buses, one is for
spi0, and another is for spi1. But when initializing the spi1
bus, "dev" has been overwrited by the ssi_create_slave_no_init() function,
so that qdev_get_child_bus() returns NULL and the last two m25p80 flashes
won't be attached to the spi1 bus, but to main-system-bus.
Here we add one variable to avoid overwriting.
Signed-off-by: Liming Wang <walimisdev@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GIC architecture specification for v1 and v2 GICs (as found
on the Cortex-A9 and newer) states that the GICC_PMR reset value
is zero; this differs from the 0xf0 reset value used on 11MPCore.
The NVIC is different again in not having a CPU interface; since
we share the GIC code we must force the priority mask field to
allow through all interrupts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
The GIC spec states that only interrupts with higher priority
than the value in the GICC_PMR priority mask register are
passed through to the processor. We were incorrectly allowing
through interrupts with a priority equal to the specified
value: correct the comparison operation to match the spec.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Fix the code in the secondary CPU boot stubs so that it correctly
initialises the GIC rather than relying on bugs or implementation
dependent aspects of the QEMU GIC implementation:
* set the GIC_PMR.Priority field to all-ones, so that all
interrupts are passed through. The default of all-zeroes
means all interrupts are masked, and QEMU only booted because
of a bug in the priority masking in our GIC implementation.
* add a barrier after GIC setup and before WFI to ensure that
GIC config is complete before we go into a possible low power
state. This isn't needed with the software GIC model but could
be required when using KVM and executing this code on the
real hardware CPU.
Note that of the three secondary stub implementations, only
the common generic one needs to support both v6 and v7 DSB
encodings; highbank and exynos4210 will always be v7 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
There are QEMUMachines that have neither IF_IDE nor IF_SCSI as a
default/standard interface to their block devices / drives. Therefore,
this patch introduces a new field default_block_type per QEMUMachine
struct. The prior use_scsi field becomes thereby obsolete and is
replaced through .default_block_type = IF_SCSI.
This patch also changes the default for s390x to IF_VIRTIO and
removes an early hack that converts IF_IDE drives.
Other parties have already claimed interest (e.g. IF_SD for exynos)
To create a sane default, for machines that dont specify a
default_block_type, this patch makes IF_IDE = 0 and IF_NONE = 1.
I checked all users of IF_NONE (blockdev.c and ww/device-hotplug.c)
as well as IF_IDE and it seems that it is ok to change the defines -
in other words, I found no obvious (to me) assumption in the code
regarding IF_NONE==0. IF_NONE is only set if there is an
explicit if=none. Without if=* the interface becomes IF_DEFAULT.
I would suggest to have some additional care, e.g. by letting
this patch sit some days in the block tree.
Based on an initial patch from Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Igor Mitsyanko <i.mitsyanko@samsung.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For the virtio-blk device (via virtio-pci) the property "config-wce" is
defined in two places. First, it's defined from the
DEFINE_VIRTIO_BLK_FEATURES macro, second it's defined directly in
virtio-pci, just two lines above the call to that macro.
The direct definition in virtio-pci.c is broken, since it operates on the
'config_wce' field of VirtIOBlkConf, which is never used anywhere else.
Therefore, this patch removes both the extra property definition and the
redundant field it works on.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Paul 'Rusty' Russell <rusty@rustcorp.com.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
kvm_irqchip_in_kernel() has an architecture specific meaning, so
we shouldn't be using it to determine whether to enabled KVM INTx
bypass. kvm_irqfds_enabled() seems most appropriate. Also use this
to protect our other call to kvm_check_extension() as that explodes
when KVM isn't enabled.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: qemu-stable@nongnu.org
* afaerber/qom-cpu:
target-i386: Postpone cpuid_level update to realize time
target-i386: Use define for cpuid vendor string size
target-i386: Separate feature string parsing from CPU model lookup
target-i386/cpu.c: Coding style fixes
qdev: qdev_create(): use error_report() instead of hw_error()
sysemu.h: Include qemu-types.h instead of qemu-common.h
Create qemu-types.h for struct typedefs
qlist.h: Do not include qemu-common.h
qga/channel-posix.c: Include headers it needs
qapi/qmp-registry.c: Include headers it needs
ui/vnc-palette.c: Include headers it needs
user: Rename qemu-types.h to qemu-user-types.h
user: Move *-user/qemu-types.h to main directory
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/acpi.1:
acpi: drop debug port
q35: update lpc pci config space according to configured devices
apci: switch piix4 pci hotplug to memory api
acpi: remove acpi_gpe_blk
apci: switch piix4 gpe to memory api
acpi: fix piix4 smbus mapping
acpi: switch smbus to memory api
acpi: cleanup ich9 memory region
apci: switch ich9 smi to memory api
apci: switch ich9 gpe to memory api
acpi: cleanup vt82c686 memory region
acpi: cleanup piix4 memory region
apci: switch evt to memory api
apci: switch cnt to memory api
apci: switch timer to memory api
apci: switch vt82c686 to memory api
apci: switch ich9 to memory api
apci: switch piix4 to memory api
Conflicts:
hw/lpc_ich9.c
Resolved merge conflict due to apm_init adding an argument.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/usb.74:
usb-tablet: Allow connecting to ehci
ehci: Lower timer freq when the periodic schedule is idle
usb: Allow overriding of usb_desc at the device level
usb: Don't allow USB_RET_ASYNC for interrupt packets
usb: Call wakeup when data becomes available for all devices with int eps
add pc-1.4
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'master' of git.qemu-project.org:/pub/git/qemu:
target-mips: Fix incorrect shift for SHILO and SHILOV
target-mips: Fix incorrect code and test for INSV
xilinx_uartlite: Accept input after rx FIFO pop
xilinx_uartlite: suppress "cannot receive message"
xilinx_axienet: Implement R_IS behaviour
Harmless, because we the error inevitably leads to another, fatal one
in pc_system_flash_init(): PC system firmware (pflash) not available.
Fix it anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These spelling bugs were found by codespell:
supressing -> suppressing
transfered -> transferred
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pci_drive_hot_add() parameter type has the wrong type: int instead of
BlockInterfaceType. It's actually redundant, so we can just drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I'm guessing this is a hangover from a previous coreification of the mptimer
sub-module. This field is completely unused - removed.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some debug printfs for SD are coming up in stdout. Redirected them to stderr
instead.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
hw_error() is specific for fatal hardware emulation errors, not for
internal errors related to the qdev object/class abstraction or object
initialization.
Replace it with an error_report() call, followed by abort().
This will also help reduce dependencies of the qdev code (as hw_error()
is from cpus.o, and depends on the CPU list from exec.o).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of keeping all those struct typedefs in qemu-common.h, move it
to a header that can be safely included by other headers, containing
only the struct typedefs and not pulling in other dependencies.
Also, move some of the qdev-core.h typedefs to the new file, too, so
other headers don't need to include qdev-core.h only because of
DeviceState and other typedefs.
This will help us remove qemu-common.h dependencies from some headers
later.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The device return false from the can receive function when the FIFO is
full. This mean the device should check for buffered input whenever a byte is
popped from the FIFO.
Reported-by: Jason Wu <huanyu@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This message is not an error condition, its just informing the user that
the device is corking the uart traffic to not drop characters.
Reported-by: Jason Wu <huanyu@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The interrupt status register R_IS is the standard clear-on-write behaviour.
This was unimplemented and defaulting to updating the register to the written
value. Implemented clear-on-write.
Reported-by: Jason Wu <huanyu@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Replace all register_ioport_*() with the new Memory API functions.
This permits to use the new Memory stuff like listeners.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Avi Kivity <avi@redhat.com>
[AF: Rebased onto hwaddr]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace all register_ioport_*() with portio_*() or a MemoryRegion.
This permits to use the new Memory stuff like listeners.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Avi Kivity <avi@redhat.com>
[AF: Rebased onto hwaddr]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace all register_ioport_*() with a MemoryRegion.
This permits to use the new Memory stuff like listeners.
For more flexibility, the IO address space is passed as an argument.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Avi Kivity <avi@redhat.com>
[AF: Rebased onto serial split]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace all register_ioport_*() with the new Memory API.
This permits to use the new Memory stuff like listeners.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Avi Kivity <avi@redhat.com>
[AF: Rebased onto hwaddr]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace all register_ioport_*() with a MemoryRegion.
This permits to use the new Memory stuff like listeners.
Moreover, the PCI device is added as an argument for apm_init(),
so we can register IO inside the PCI IO address space.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Avi Kivity <avi@redhat.com>
[AF: Rebased onto hwaddr and q35]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This function permits to retrieve ISA IO address space.
It will be usefull when we need to pass IO address space as argument.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Our ehci code has is capable of significantly lowering the wakeup rate
for the hcd emulation while the device is idle. It is possible to add
similar code ot the uhci emulation, but that simply is not there atm,
and there is no reason why a (virtual) usb-tablet can not be a USB-2 device.
Making usb-hid devices connect to the emulated ehci controller instead
of the emulated uhci controller on vms which have both lowers the cpuload
for a fully idle vm from 20% to 2-3% (on my laptop).
An alternative implementation to using a property to select the tablet
type, would be simply making it a new device type, ie usb-tablet2, but the
downside of that is that this will require libvirt changes to be available
through libvirt at all, and then management tools changes to become the
default for new vms, where as using a property will automatically get
any pc-1.3 type vms the lower cpuload.
[ kraxel: adapt compat property for post-1.3 merge ]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
tablet compat fixup
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Lower the timer freq if no iso schedule packets complete for 64 frames in
a row.
We can safely do this, without adding latency, because:
1) If there is isoc traffic this will never trigger
2) For async handled interrupt packets (only usb-host), the completion handler
will immediately schedule the frame_timer from a bh
3) All devices using NAK to signal no data for interrupt endpoints now use
wakeup, which will immediately schedule the frame_timer from a bh
The advantage of this is that when we only have interrupt packets in the
periodic schedule, async_stepdown can do its work and significantly lower
the frequency at which the frame_timer runs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows devices to present a different set of descriptors based on
device properties.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is tempting to use USB_RET_ASYNC for interrupt packets, rather then the
current NAK + polling approach, but this causes issues for migration, as
an async completed packet will not getting written back to guest memory until
the next poll time, and if a migration happens in between it will get lost!
Make an exception for host devices, because:
1) host-linux actually uses async completion for interrupt endpoints
2) host devices don't migrate anyways
Ideally we would convert host-linux.c to handle (input) interrupt endpoints in
a buffered manner like it does for isoc endpoints, keeping multiple urbs
submitted to ensure the devices timing requirements are met, as well as making
its interrupt ep handling the same as other usb-devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is necessary for proper interaction with the xhci controller, and it
will allow other hcds to lower there frame timer while waiting for interrupt
data.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I'm pretty sure this isn't needed any more. I think this predates the
switch to seabios, and the seabios DSDT table has a DBUG() aml macro
which writes stuff to the seabios debug port (0x402).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Scott Wood
Bharat Bhushan
Alexander Graf
Liming Wang
Andreas Färber
Gerd Hoffmann
Hans de Goede
Amos Kong
Michael Contreras
Blue Swirl
Stefan Weil
Anthony Liguori
Markus Armbruster
Lucas Meneghel Rodrigues
Stefan Hajnoczi
Alexey Zaytsev
Alon Levy
Michael S. Tsirkin
Knut Omang
Xudong Hao
Alex Horn
Andreas Färber
Eduardo Habkost
Paolo Bonzini
Laszlo Ersek
Peter Crosthwaite
Amit Shah
Sander Eikelenboom
Stefano Stabellini
Gerd Hoffmann
David Gibson
Ben Herrenschmidt
Michael Ellerman
Antoine Mathys
Pavel Hrdina
Jason Baron
Dong Xu Wang
Jean-Christophe DUBOIS
Daniel Sangorrin
Peter Maydell
Christian Borntraeger
Alex Williamson
Julien Grall