There is no DSISR or DAR in BookE. Change to ESR and DEAR.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in BookE.
Also remove 40x code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for BookE CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220128224018.1228062-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This CPU was partially removed due to lack of support in 2017 by commit
aef7796057 ("ppc: remove non implemented cpu models").
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220128221611.1221715-1-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 602 was derived from the PowerPC 603, for the gaming market it
seems. It was hardly used and no firmware supporting the CPU could be
found. Drop support.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
The 74xx does not have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The whole power saving states logic seems to be dependent on HV mode,
which don't exist for 74xx so I'm removing it all and leaving the
abort message.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the BookE code and add a comment explaining why we need to keep
hypercall support even though this CPU does not have a hypervisor
mode.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 74xx don't have MSR_HV so all the LPES0 logic can be removed.
Also remove the BookE IRQ code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 74xx don't have an MSR_HV.
Also remove 40x and BookE code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DSI
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
POWERPC_EXCP_VPU
POWERPC_EXCP_VPUA
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 74xx
CPUs. This commit copies powerpc_excp_legacy verbatim so the next one
has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220127201116.1154733-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since this is now BookS only, we can simplify the code a bit and check
has_hv_mode instead of enumerating the exception models. LPES0 does
not make sense if there is no MSR_HV.
Note that QEMU does not support HV mode on 970 and POWER5+ so we don't
set MSR_HV in msr_mask.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- Always uses HV_EMU if the CPU has MSR_HV;
- Exceptions always delivered in 64 bit.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DSEG
POWERPC_EXCP_DSI
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_FU
POWERPC_EXCP_HDECR
POWERPC_EXCP_HDSI
POWERPC_EXCP_HISI
POWERPC_EXCP_HVIRT
POWERPC_EXCP_HV_EMU
POWERPC_EXCP_HV_FU
POWERPC_EXCP_ISEG
POWERPC_EXCP_ISI
POWERPC_EXCP_MAINT
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SDOOR_HV
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_SYSCALL_VECTORED
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
POWERPC_EXCP_VPU
POWERPC_EXCP_VPUA
POWERPC_EXCP_VSXU
POWERPC_EXCP_HV_MAINT
POWERPC_EXCP_SDOOR
(I added the two above that were not being considered. They used to be
"Invalid exception". Now they become "Unimplemented exception" which
is more accurate.)
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for BookS CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124184605.999353-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 Program Interrupt does not set SRR1 with any diagnostic bits,
just a clean copy of the MSR.
We're using the BookE Exception Syndrome Register which is different
from the 405.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: restored SPR_40x_ESR settings ]
Message-Id: <20220118184448.852996-14-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 ISI does not set SRR1 with any exception syndrome bits, only a
clean copy of the MSR.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg : Fixed removal which was done in the wrong routine ]
Message-Id: <20220118184448.852996-13-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 has no DSISR or DAR, so convert the trace entry to
use ESR and DEAR instead.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg : - changed registers to ESR and DEAR.
- updated commit log ]
Message-Id: <20220118184448.852996-12-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The current Debug exception dispatch is the BookE one, so it is
different from the 405. We effectively don't support the 405 Debug
exception.
This patch removes the BookE code and moves the DEBUG into the "not
implemented" block.
Note that there is in theory a functional change here since we now
abort when a Debug exception happens. However, given how it was never
implemented, I don't believe this to have ever been dispatched for the
405.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no DSISR in the 405. It uses DEAR which we already set
earlier at ppc_cpu_do_unaligned_access.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au
Message-Id: <20220118184448.852996-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
405 has no MSR_HV and EPR is BookE only so we can remove it all.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
powerpc_excp_40x applies only to the 405, so remove HV code and
references to BookE.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In powerpc_excp_40x the Critical exception is now for 405 only, so we
can remove the BookE and G2 blocks.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220118184448.852996-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV or MSR_LE;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Interrupts Little Endian;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_CRITICAL
POWERPC_EXCP_DEBUG
POWERPC_EXCP_DSI
POWERPC_EXCP_DTLB
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FIT
POWERPC_EXCP_ISI
POWERPC_EXCP_ITLB
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PIT
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_WDT
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118184448.852996-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for 40x CPUs. This
commit copies powerpc_excp_legacy verbatim so the next one has a clean
diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220118184448.852996-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 MSR has the Machine Check Enable bit. We're making use of it
when dispatching Machine Check, so add the bit to the msr_mask.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118184448.852996-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Bit 13 is the Wait State Enable bit. Give it its proper name.
As far as I can see we don't do anything with MSR_POW for the 405, so
this change has no effect.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118184448.852996-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Commit cd0c6f4735 did not take into account 405 CPUs when adding
support to batching of TCG tlb flushes. Set the TLB_NEED_LOCAL_FLUSH
flag when the SPR_40x_PID is set or a TLB updated.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Fixes: cd0c6f4735 ("ppc: Do some batching of TCG tlb flushes")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113180352.1234512-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
POWERPC_MMU_BOOKE is not a mask and should not be tested with a
bitwise AND operator.
It went unnoticed because it only impacts the 601 CPU implementation
for which we don't have a known firmware image.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220124081609.3672341-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
cpu_interrupt_exittb() was introduced by commit 044897ef4a
("target/ppc: Fix system lockups caused by interrupt_request state
corruption") as a way to wrap cpu_interrupt() helper in BQL.
After that, commit 6d38666a89 ("ppc: Ignore the CPU_INTERRUPT_EXITTB
interrupt with KVM") added a condition to skip this interrupt if we're
running with KVM.
Problem is that the change made by the above commit, testing for
!kvm_enabled() at the start of cpu_interrupt_exittb():
static inline void cpu_interrupt_exittb(CPUState *cs)
{
if (!kvm_enabled()) {
return;
}
(... do cpu_interrupt(cs, CPU_INTERRUPT_EXITTB) ...)
is doing the opposite of what it intended to do. This will return
immediately if not kvm_enabled(), i.e. it's a emulated CPU, and if
kvm_enabled() it will proceed to fire CPU_INTERRUPT_EXITTB.
Fix the 'skip KVM' condition so the function is a no-op when
kvm_enabled().
CC: Greg Kurz <groug@kaod.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/809
Fixes: 6d38666a89 ("ppc: Ignore the CPU_INTERRUPT_EXITTB interrupt with KVM")
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220121160841.9102-1-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Book-E architecture does not set the error code in 31:27 bits
of SRR1, but instead uses these bits for custom fields such
as GS (Guest Supervisor).
Wrongly setting these fields will result in QEMU crashes
when attempting to execute not executable code due to the attempts
to use Guest Supervisor mode.
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Greg Kurz <groug@kaod.org>
Cc: qemu-ppc@nongnu.org
Cc: qemu-devel@nongnu.org
Cc: qemu-stable@nongnu.org
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220121093107.15478-1-cheptsov@ispras.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
After a TLB miss exception, GPRs 0-3 must be restored on rfi.
This is managed by hreg_store_msr() which is called by do_rfi()
However, hreg_store_msr() does it if MSR[TGPR] is unset in the
passed MSR value.
The problem is that do_rfi() is given the content of SRR1 as
the value to be set in MSR, but TGPR bit is not part of SRR1
and that bit is used for something else and is sometimes set
to 1, leading to hreg_store_msr() not restoring GPRs.
So, do the same way as for POW bit, force clearing it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Cedric Le Goater <clg@kaod.org>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220120103824.239573-1-christophe.leroy@csgroup.eu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 7448 CPU is an evolution of the PowerPC 7447A and the last of the
G4 family. Change its family to reflect correctly its features. This
fixes Linux boot.
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220117092555.1616512-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Commit c8f49e6b93 ("target/ppc: remove 401/403 CPUs") left a few
things behind.
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220117091541.1615807-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220118104150.1899661-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This breaks migration compatibility from (very) old versions of
QEMU. This should not be a problem for the pseries machine for which
migration is only supported on recent QEMUs ( > 2.x). There is no
clear status on what is supported or not for the other machines. Let's
move forward and remove the .load_state_old handler.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220118104150.1899661-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We use the endianness of interrupts to determine which endianness to
use for the guest kernel memory dump. For machines that support HILE
(powernv8 and up) we have been always generating big endian dump
files.
This patch uses the HILE support recently added to
ppc_interrupts_little_endian to fix the endianness of the dumps for
powernv machines.
Here are two dumps created at different moments:
$ file skiboot.dump
skiboot.dump: ELF 64-bit MSB core file, 64-bit PowerPC ...
$ file kernel.dump
kernel.dump: ELF 64-bit LSB core file, 64-bit PowerPC ...
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Next patches will split powerpc_excp in multiple family specific
handlers. This patch adds a wrapper to make the transition clearer.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ppc_interrupts_little_endian function is now suitable for
determining the endianness of interrupts for all CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some CPUs set ILE via an MSR bit. We can make
ppc_interrupts_little_endian handle that case as well. Now we have a
centralized way of determining the endianness of interrupts.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ppc_interrupts_little_endian function could be used for interrupts
delivered in Hypervisor mode, so add support for powernv8 and powernv9
to it.
Also drop the comment because it is inaccurate, all CPUs that can run
little endian can have interrupts in little endian. The point is
whether they can take interrupts in an endianness different from
MSR_LE.
This change has no functional impact.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the compile time definition and make the logging be controlled
by the `-d mmu` option in the cmdline.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20220107222601.4101511-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v2.03 introduced Floating Round to Integer instructions : frin,
friz, frip, and frim. Add them to POWER5+.
The PPC_FLOAT_EXT flag also includes the fre (Floating Reciprocal
Estimate) instruction which was introduced in ISA v2.0x. The
architecture document says its optional and that might be the reason
why it has been kept under the PPC_FLOAT_EXT flag. This means 970 CPUs
can not use it under QEMU, which doesn't seem to be a problem.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
popcntb instruction was added in ISA v2.02. Add support for POWER5+
processors since they implement ISA v2.03.
PPC970 CPUs implement v2.01 and do not support popcntb.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220105095142.3990430-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MMCR0 writes will change only MMCR0 bits which are used to calculate
HFLAGS_PMCC0, HFLAGS_PMCC1 and HFLAGS_INSN_CNT hflags. No other machine
register will be changed during this operation. This means that
hreg_compute_hflags() is overkill for what we need to do.
pmu_update_summaries() is already updating HFLAGS_INSN_CNT without
calling hreg_compure_hflags(). Let's do the same for the other 2 MMCR0
hflags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220103224746.167831-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use the cached pmc_cyc_cnt value in pmu_update_cycles
and pmc_update_overflow_timer. This leaves pmc_get_event
and pmc_is_inactive unused, so remove them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103224746.167831-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use the cached pmc_ins_cnt value. Unroll the loop over the
different PMC counters. Treat the PMC4 run-latch specially.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103224746.167831-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is the combination of frozen bit and counter type, on a per
counter basis. So far this is only used by HFLAGS_INSN_CNT, but
will be used more later.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[danielhb: fixed PMC4 cyc_cnt shift, insn run latch code,
MMCR0_FC handling, "PMC[1-6]" comment]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220103224746.167831-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We can just access it directly in powerpc_excp.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[ clg: Took into account removal of inline ]
Message-Id: <20211229165751.3774248-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that 'vector' is known before calling the interrupt-specific setup
code, we can move all of the scv setup into one place.
No functional change intended.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211229165751.3774248-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
None of the interrupt setup code touches 'vector', so we can move it
earlier in the function. This will allow us to later move the System
Call Vectored setup that is on the top level into the
POWERPC_EXCP_SYSCALL_VECTORED code block.
This patch also moves the verification for when 'excp' does not have
an address associated with it. We now bail a little earlier when that
is the case. This should not cause any visible effects.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211229165751.3774248-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The next patch will start accessing the excp_vectors array earlier in
the function, so add a bounds check as first thing here.
This converts the empty return on POWERPC_EXCP_NONE to an error. This
exception number never reaches this function and if it does it
probably means something else went wrong up the line.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211229165751.3774248-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There are currently only two interrupts that use alternate SRRs, so
let them write to them directly during the setup code.
No functional change intended.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211229165751.3774248-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The non-signalling versions of VSX scalar convert to shorter/longer
precision insns doesn't silence SNaNs in the hardware. To better match
this behavior, use the non-arithmatic conversion of helper_todouble
instead of float32_to_float64. A test is added to prevent future
regressions.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211228120310.1957990-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rework slightly ppc_cpu_dump_state() to replace the various 'if'
statements with a 'switch'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-10-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PID SPR of the 405 CPU contains the translation ID of the TLB
which is a 8-bit field. Enforce the mask with a store helper.
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-8-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 timers were broken when booke support was added. Assumption
was made that the register numbers were the same but it's not :
SPR_BOOKE_TSR (0x150)
SPR_BOOKE_TCR (0x154)
SPR_40x_TSR (0x3D8)
SPR_40x_TCR (0x3DA)
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: ddd1055b07 ("PPC: booke timers")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no need to deactivate MMU logging at compile time. Remove all
use of defines. Only keep DUMP_PAGE_TABLES for another series since
page tables could be dumped from the monitor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103063441.3424853-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It facilitates reading the logs when mask CPU_LOG_INT is activated. We
should do the same for error codes.
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211222064025.1541490-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The compiler should know better how to inline code if necessary.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103063441.3424853-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
For Radix translation, the EA range is 64-bits. when EA(2:11) are
nonzero, a segment interrupt should occur.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20211231073122.3183583-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
An Event-Based Branch (EBB) allows applications to change the NIA when a
event-based exception occurs. Event-based exceptions are enabled by
setting the Branch Event Status and Control Register (BESCR). If the
event-based exception is enabled when the exception occurs, an EBB
happens.
The following operations happens during an EBB:
- Global Enable (GE) bit of BESCR is set to 0;
- bits 0-61 of the Event-Based Branch Return Register (EBBRR) are set
to the the effective address of the NIA that would have executed if the EBB
didn't happen;
- Instruction fetch and execution will continue in the effective address
contained in the Event-Based Branch Handler Register (EBBHR).
The EBB Handler will process the event and then execute the Return From
Event-Based Branch (rfebb) instruction. rfebb sets BESCR_GE and then
redirects execution to the address pointed in EBBRR. This process is
described in the PowerISA v3.1, Book II, Chapter 6 [1].
This patch implements the rfebb instruction. Descriptions of all
relevant BESCR bits are also added - this patch is only using BESCR_GE,
but the next patches will use the remaining bits.
[1] https://wiki.raptorcs.com/w/images/f/f5/PowerISA_public.v3.1.pdf
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-9-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PM_RUN_INST_CMPL, instructions completed with the run latch set, is
the architected PowerISA v3.1 event defined with PMC4SEL = 0xFA.
Implement it by checking for the CTRL RUN bit before incrementing the
counter. To make this work properly we also need to force a new
translation block each time SPR_CTRL is written. A small tweak in
pmu_increment_insns() is then needed to only increment this event
if the thread has the run latch.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-8-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PMU is already counting cycles by calculating time elapsed in
nanoseconds. Counting instructions is a different matter and requires
another approach.
This patch adds the capability of counting completed instructions (Perf
event PM_INST_CMPL) by counting the amount of instructions translated in
each translation block right before exiting it.
A new pmu_count_insns() helper in translation.c was added to do that.
After verifying that the PMU is counting instructions, call
helper_insns_inc(). This new helper from power8-pmu.c will add the
instructions to the relevant counters. It'll also be responsible for
triggering counter negative overflows as it is already being done with
cycles.
To verify whether the PMU is counting instructions or now, a new hflags
named 'HFLAGS_INSN_CNT' is introduced. This flag will match the internal
state of the PMU. We're be using this flag to avoid calling
helper_insn_inc() when we do not have a valid instruction event being
sampled.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PowerISA v3.1 defines that if the proper bits are set (MMCR0_PMC1CE
for PMC1 and MMCR0_PMCjCE for the remaining PMCs), counter negative
conditions are enabled. This means that if the counter value overflows
(i.e. exceeds 0x80000000) a performance monitor alert will occur. This alert
can trigger an event-based exception (to be implemented in the next patches)
if the MMCR0_EBE bit is set.
For now, overflowing the counter when the PMC is counting cycles will
just trigger a performance monitor alert. This is done by starting the
overflow timer to expire in the moment the overflow would be occuring. The
timer will call fire_PMC_interrupt() (via cpu_ppc_pmu_timer_cb) which will
trigger the PMU alert and, if the conditions are met, an EBB exception.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
MMCR1 determines the events to be sampled by the PMU. Updating the
counters at every MMCR1 write ensures that we're not sampling more
or less events by looking only at MMCR0 and the PMCs.
It is worth noticing that both the Book3S PowerPC PMU, and this IBM
Power8+ PMU that we're modeling, also uses MMCRA, MMCR2 and MMCR3 to
control the PMU. These three registers aren't being handled in this
initial implementation, so for now we're controlling all the PMU
aspects using MMCR0, MMCR1 and the PMCs.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Calling pmu_update_cycles() on every PMC read/write operation ensures
that the values being fetched are up to date with the current PMU state.
In theory we can get away by just trapping PMCs reads, but we're going
to trap PMC writes to deal with counter overflow logic later on. Let's
put the required wiring for that and make our lives a bit easier in the
next patches.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch adds the barebones of the PMU logic by enabling cycle
counting. The overall logic goes as follows:
- MMCR0 reg initial value is set to 0x80000000 (MMCR0_FC set) to avoid
having to spin the PMU right at system init;
- to retrieve the events that are being profiled, pmc_get_event() will
check the current MMCR0 and MMCR1 value and return the appropriate
PMUEventType. For PMCs 1-4, event 0x2 is the implementation dependent
value of PMU_EVENT_INSTRUCTIONS and event 0x1E is the implementation
dependent value of PMU_EVENT_CYCLES. These events are supported by IBM
Power chips since Power8, at least, and the Linux Perf driver makes use
of these events until kernel v5.15. For PMC1, event 0xF0 is the
architected PowerISA event for cycles. Event 0xFE is the architected
PowerISA event for instructions;
- if the counter is frozen, either via the global MMCR0_FC bit or its
individual frozen counter bits, PMU_EVENT_INACTIVE is returned;
- pmu_update_cycles() will go through each counter and update the
values of all PMCs that are counting cycles. This function will be
called every time a MMCR0 update is done to keep counters values
up to date. Upcoming patches will use this function to allow the
counters to be properly updated during read/write of the PMCs
and MMCR1 writes.
Given that the base CPU frequency is fixed at 1Ghz for both powernv and
pseries clock, cycle calculation assumes that 1 nanosecond equals 1 CPU
cycle. Cycle value is then calculated by adding the elapsed time, in
nanoseconds, of the last cycle update done via pmu_update_cycles().
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch starts an IBM Power8+ compatible PMU implementation by adding
the representation of PMU events that we are going to sample,
PMUEventType. This enum represents a Perf event that is being sampled by
a specific counter 'sprn'. Events that aren't available (i.e. no event
was set in MMCR1) will be of type 'PMU_EVENT_INVALID'. Events that are
inactive due to frozen counter bits state are of type
'PMU_EVENT_INACTIVE'. Other types added in this patch are
PMU_EVENT_CYCLES and PMU_EVENT_INSTRUCTIONS. More types will be added
later on.
Let's also add the required PMU cycle overflow timers. They will be used
to trigger cycle overflows when cycle events are being sampled. This
timer will call cpu_ppc_pmu_timer_cb(), which in turn calls
fire_PMC_interrupt(). Both functions are stubs that will be implemented
later on when EBB support is added.
Two new helper files are created to host this new logic.
cpu_ppc_pmu_init() will init all overflow timers during CPU init time.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This reverts commit 336e91f853.
It breaks the --disable-tcg build:
../target/ppc/excp_helper.c:463:29: error: implicit declaration of
function ‘cpu_ldl_code’ [-Werror=implicit-function-declaration]
We should not have TCG code in powerpc_excp because some kvm-only
routines use it indirectly to dispatch interrupts. See
kvm_handle_debug, spapr_mce_req_event and
spapr_do_system_reset_on_cpu.
We can re-introduce the change once we have split the interrupt
injection code between KVM and TCG.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20211209173323.2166642-1-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When Altivec support was added to the e6500 kernel in 2012[1], the
QEMU code was not changed, so we don't register the VPU/VPUA
exceptions for the e6500:
qemu: fatal: Raised an exception without defined vector 73
Note that the error message says 73, instead of 32, which is the IVOR
for VPU. This is because QEMU knows only knows about the VPU interrupt
for the 7400s. In theory, we should not be raising _that_ VPU
interrupt, but instead another one specific for the e6500.
We unfortunately cannot register e6500-specific VPU/VPUA interrupts
because the SPEU/EFPDI interrupts also use IVOR32/33. These are
present only in the e500v1/2 versions. From the user manual:
e500v1, e500v2: only SPEU/EFPDI/EFPRI
e500mc, e5500: no SPEU/EFPDI/EFPRI/VPU/VPUA
e6500: only VPU/VPUA
So I'm leaving IVOR32/33 as SPEU/EFPDI, but altering the dispatch code
to convert the VPU #73 to a #32 when we're in the e6500. Since the
handling for SPEU and VPU is the same this is the only change that's
needed. The EFPDI is not implemented and will cause an abort. I don't
think it worth it changing the error message to take VPUA into
consideration, so I'm not changing anything there.
This bug was discussed in the thread:
https://lists.gnu.org/archive/html/qemu-ppc/2021-06/msg00222.html
1- https://git.kernel.org/torvalds/c/cd66cc2ee52
Reported-by: <mario@locati.it>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211213133542.2608540-1-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This instruction has VRT and VRB fields instead of T/TX and B/BX.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211213120958.24443-4-victor.colombo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Victor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20211213120958.24443-3-victor.colombo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PPC instruction xsmaxcdp, xsmincdp, xsmaxjdp, and xsminjdp are using
vector registers when they should be using VSX ones. This happens
because the instructions are using GEN_VSX_HELPER_R3, which adds 32
to the register numbers, effectively making them vector registers.
This patch fixes it by changing these instructions to use
GEN_VSX_HELPER_X3.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Victor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20211213120958.24443-2-victor.colombo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
They have been there since 2007 without any board using them, most
were protected by a TODO define. Drop support.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211202191108.1291515-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The exception model id for 601v has been removed without mention
why. I assume it was inadvertent and restore it here.
Fixes: b632a148b6 ("target-ppc: Use QOM method dispatch for MMU fault handling")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211208123029.2052625-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 603e uses the same exception code as 603 so we don't need a
dedicated entry for it.
This is only a removal of redundant code, no functional change.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211208123029.2052625-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The Floating-point Unavailable and Decrementer interrupts are being
registered at the same 0x900 address. The FPU should be at 0x800
instead.
Verified on MPC555, MPC860 and MPC885 user manuals.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211208123029.2052625-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
(Applies to 7441, 7445, 7450, 7451, 7455, 7457, 7447, 7447a and 7448)
The QEMU-side software TLB implementation for the 7450 family of CPUs
is being removed due to lack of known users in the real world. The
last users in the code were removed by the two previous commits.
A brief history:
The feature was added in QEMU by commit 7dbe11acd8 ("Handle all MMU
models in switches...") with the mention that Linux was not able to
handle the TLB miss interrupts and the MMU model would be kept
disabled.
At some point later, commit 8ca3f6c382 ("Allow selection of all
defined PowerPC 74xx (aka G4) CPUs.") enabled the model for the 7450
family without further justification.
We have since the year 2011 [1] been unable to run OpenBIOS in the
7450s and have not heard of any other software that is used with those
CPUs in QEMU. Attempts were made to find a guest OS that implemented
the TLB miss handlers and none were found among Linux 5.15, FreeBSD 13,
MacOS9, MacOSX and MorphOS 3.15.
All CPUs that registered this feature were moved to an MMU model that
replaces the software TLB with a QEMU hardware TLB
implementation. They can now run the same software as the 7400 CPUs,
including the OSes mentioned above.
References:
- https://bugs.launchpad.net/qemu/+bug/812398https://gitlab.com/qemu-project/qemu/-/issues/86
- https://lists.nongnu.org/archive/html/qemu-ppc/2021-11/msg00289.html
message id: 20211119134431.406753-1-farosas@linux.ibm.com
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211130230123.781844-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The e600 CPU is a successor of the 7448 and like all the 7450s CPUs,
it has an optional software TLB feature.
We have determined that there is no OS software support for the 7450
software TLB available these days. See the previous commit for more
information.
This patch disables the SPRs and instructions related to software TLB
from the e600 CPU.
No functional change intended. These facilities should be used by the
OS in interrupt handlers for interrupts that QEMU never generates.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211130230123.781844-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
(Applies to 7441, 7445, 7450, 7451, 7455, 7457, 7447 and 7447a)*
We have since 2011 [1] been unable to run OpenBIOS in the 7450s and
have not heard of any other software that is used with those CPUs in
QEMU. A current discussion [2] shows that the 7450 software TLB is
unsupported in Linux 5.15, FreeBSD 13, MacOS9, MacOSX and MorphOS
3.15. With no known support in firmware or OS, this means that no code
for any of the 7450 CPUs is ever ran in QEMU.
Since the implementation in QEMU of the 7400 MMU is the same as the
7450, except for the software TLB vs. hardware TLB search, this patch
changes all 7450 cpus to the 7400 MMU model. This has the practical
effect of disabling the software TLB feature while keeping other
aspects of address translation working as expected.
This allow us to run software on the 7450 family again.
*- note that the 7448 is currently aliased in QEMU for a 7400, so it
is unaffected by this change.
1- https://bugs.launchpad.net/qemu/+bug/812398https://gitlab.com/qemu-project/qemu/-/issues/86
2- https://lists.nongnu.org/archive/html/qemu-ppc/2021-11/msg00289.html
message id: 20211119134431.406753-1-farosas@linux.ibm.com
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211130230123.781844-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When computing the predicate "is this value currently formatted
for single precision", we do not want to round the value according
to the current rounding mode, nor perform a floating-point equality.
We want to see if the N bits that make up single-precision are the
only ones set within the register, and then a bitwise equality.
Fixes a bug in which a single-precision NaN is considered !SP,
because float64_eq(nan, nan) is always false.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-35-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no double-rounding bug here, because the result is
merely an estimate to within 1 part in 256, but perform the
operation with float64r32_div for consistency.
Use float_flag_invalid_snan instead of recomputing the
snan-ness of the operand.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-34-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no double-rounding bug here, because the result is
merely an estimate to within 1 part in 32, but perform the
operation with float64r32_div for consistency.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-33-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use float64r32_mul. Fixes a double-rounding issue with performing
the compuation in float64 and then rounding afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-32-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use float64r32_{add,sub,div}. Fixes a double-rounding issue with
performing the compuation in float64 and then rounding afterward.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211119160502.17432-31-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
