Commit 787e4a85 [block: Add options QDict to bdrv_file_open() prototypes] didn't
update rbd.c accordingly.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This one fixes a race which qemu had also in iscsi block driver
between cancellation and io completition.
qemu_rbd_aio_cancel was not synchronously waiting for the end of
the command.
To archieve this it introduces a new status flag which uses
-EINPROGRESS.
Signed-off-by: Stefan Priebe <s.priebe@profihost.ag>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
rbd / rados tends to return pretty often length of writes
or discarded blocks. These values might be bigger than int.
The steps to reproduce are:
mkfs.xfs -f a whole device bigger than int in bytes. mkfs.xfs sends
a discard. Important is that you use scsi-hd and set
discard_granularity=512. Otherwise rbd disabled discard support.
Signed-off-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore. Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers should ignore BDRV_O_CACHE_WB in .bdrv_open flags,
and in the bs->open_flags.
This patch removes the code, leaving the behaviour behind as if
BDRV_O_CACHE_WB was set.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Writeback caching was added in Ceph 0.46, and writethrough will be in
0.47. These are controlled by general config options, so there's no
need to check for librbd version.
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It now allows specifying offset within qiov to start from and
amount of bytes to copy. Actual implementation is just a call
to iov_to_buf().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Similar to
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes);
the new prototype is:
qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
const void *buf, size_t bytes);
The processing starts at offset bytes within qiov.
This way, we may copy a bounce buffer directly to
a middle of qiov.
This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.
As with utility implementation, we now assert that the
offset is inside actual iovec. Nothing changed for
current callers, because `offset' parameter is new.
While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Change the write flag to an operation type in RBDAIOCB, and make the
buffer optional since discard doesn't use it.
Discard is first included in librbd 0.1.2 (which is in Ceph 0.46).
If librbd is too old, leave out qemu_rbd_aio_discard entirely,
so the old behavior is preserved.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Greg Farnum <gregory.farnum@dreamhost.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The caller expects psn_tab to be NULL when there are no snapshots or
an error occurs. This results in calling g_free on an invalid address.
Reported-by: Oliver Francke <Oliver@filoo.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E = qemu_aio_get (...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed occurrences in linux-aio.c and posix-aio-compat.c.
Those were done by hand.
The change in vdi_aio_setup's caller was also done by hand.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two different types of flush that you can do: Flushing one level up
to the OS (i.e. writing data to the host page cache) or flushing it all the way
down to the disk. The existing functions flush to the disk, reflect this in the
function name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since coroutine operation is now mandatory, convert all bdrv_flush
implementations to coroutines. For qcow2, this means taking the lock.
Other implementations are simpler and just forward bdrv_flush to the
underlying protocol, so they can avoid the lock.
The bdrv_flush callback is then unused and can be eliminated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The config string is variously delimited by =, @, and /, depending on the
field. Allow these characters to be escaped by preceeding them with \.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
librbd recently added async writeback and flush support. If the new
rbd_flush() call is available, call it.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Properly document the configuration string syntax and semantics. Remove
(out of date) details about the librbd implementation.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we are reading from the default config location, ignore any failures.
It is perfectly legal for the user to specify exactly the options they need
and to not rely on any config file.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix leak of s->snap in failure path. Simplify error paths for the whole
function.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No assignment in condition. Remove duplicate ret > 0 check.
Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow the client id to be specified in the config string via 'id=' so that
users can control who they authenticate as. Currently they are stuck with
the default ('admin'). This is necessary for anyone using authentication
in their environment.
Signed-off-by: Sage Weil <sage@newdream.net>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Variable 'snap' is assigned a value that is never used.
Remove snap and the related code.
Cc: Christian Brunner <chb@muc.de>
Cc: Josh Durgin <josh.durgin@dreamhost.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If scheduling fails, the number of outstanding I/Os must be correct,
or there will be a hang when waiting for everything to be flushed.
Reviewed-by: Christian Brunner <chb@muc.de>
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new format is rbd:pool/image[@snapshot][:option1=value1[:option2=value2...]]
Each option is used to configure rados, and may be any Ceph option, or "conf".
The "conf" option specifies a Ceph configuration file to read.
This allows rbd volumes from more than one Ceph cluster to be used by
specifying different monitor addresses, as well as having different
logging levels or locations for different volumes.
Reviewed-by: Christian Brunner <chb@muc.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
librbd stacks on top of librados to provide access
to rbd images.
Using librbd simplifies the qemu code, and allows
qemu to use new versions of the rbd format
with few (if any) changes.
Reviewed-by: Christian Brunner <chb@muc.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RBD is an block driver for the distributed file system Ceph
(http://ceph.newdream.net/). This driver uses librados (which is part
of the Ceph server) for direct access to the Ceph object store and is
running entirely in userspace (Yehuda also wrote a driver for the
linux kernel, that can be used to access rbd volumes as a block
device).
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Christian Brunner <chb@muc.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
