Add missing entry for pif ("protection information format").
Protection information size can be 8 or 16 bytes, Update the pil entry
as per the NVM command set specification.
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230730180329.851576-1-sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We have postcopy recovery but not reflected in the document, do an update
for that.
Add a very small section on postcopy preempt.
Touch up the pagemap section, dropping the unsent map because it's already
been dropped in the source code in commit 1e7cf8c323 ("migration/postcopy:
unsentmap is not necessary for postcopy").
Touch up the postcopy section to remove "network connection" failures as
downside, because now it's not fatal and can be recovered. Suggested by
Laszlo.
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230706115611.371048-1-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Has return zero for more than 10 years.
Specifically we introduced the field in 1.5.0
commit f1c72795af
Author: Peter Lieven <pl@kamp.de>
Date: Tue Mar 26 10:58:37 2013 +0100
migration: do not sent zero pages in bulk stage
during bulk stage of ram migration if a page is a
zero page do not send it at all.
the memory at the destination reads as zero anyway.
even if there is an madvise with QEMU_MADV_DONTNEED
at the target upon receipt of a zero page I have observed
that the target starts swapping if the memory is overcommitted.
it seems that the pages are dropped asynchronously.
this patch also updates QMP to return the number of
skipped pages in MigrationStats.
but removed its usage in 1.5.3
commit 9ef051e553
Author: Peter Lieven <pl@kamp.de>
Date: Mon Jun 10 12:14:19 2013 +0200
Revert "migration: do not sent zero pages in bulk stage"
Not sending zero pages breaks migration if a page is zero
at the source but not at the destination. This can e.g. happen
if different BIOS versions are used at source and destination.
It has also been reported that migration on pseries is completely
broken with this patch.
This effectively reverts commit f1c72795af.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230612193344.3796-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* Fix LMUL check to use VLEN
* Fix typo field in NUMA error_report
* check priv_ver before auto-enable zca/zcd/zcf
* Fix disas output of upper immediates
* tidy CPU firmware section
-----BEGIN PGP SIGNATURE-----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=MOsI
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230719-1' of https://github.com/alistair23/qemu into staging
Fourth RISC-V PR for 8.1
* Fix LMUL check to use VLEN
* Fix typo field in NUMA error_report
* check priv_ver before auto-enable zca/zcd/zcf
* Fix disas output of upper immediates
* tidy CPU firmware section
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmS3akMACgkQr3yVEwxT
# gBPQ/BAArrieEkrRco3tIQJFZqTLfII28M0cYdwN+gjMAkL6RlauCh5yKkc+gsGy
# bhhpr0AE+EzrjKfJgdyMQe2ZH08WEpoAfJHAmLTSm2ktgIlnDAjyJtVksZ3FSwfG
# MRK3v0CChyOav3EfDZzK9jcaXeaSSfjCIG8JW3enoZxf2TnpoXlsCIQdRTnMw7Um
# C73BWoOGOfixFehywHBnkkAPo/nkQPofELrRKNTlefAIsH1RcgYw+s3IgCIuYxJN
# zCjM1y6ye1aiaQhKcNJiLoiP4Eq2R6vUuL8RKWkXqTP3QBZUqKMPnRVgI+W0qRAj
# 9DS+l37zMdxytovQ4gmIqnENT8ty9bholOtWM8nI54subJBplQhkRednG3RBFYjH
# hqbsakcHfE1lyyNI7WoBpO8UMtnOad6eBNmMOM48VduSdNuBZN3ksoRVomnJTlCY
# nq1ZdteywHEZ3uBqk3k/4yzKH+jLj0McPz5FswxsMIGScVjd6H8rMYmM95r1He4k
# YTJ8GwnOTBs1tFxOz5DaM3BVfq5hrzB0SbpDHMOdQHNXnqkyfvSd/QWeXfnY09Ux
# kbNvSpzjn7wWRSP7s4KMcTmas4oGtPS2dheREB/gmoC1ubrfuhbzduDNXJt+omuC
# GDcn9cpouyE/Vp/358PuEe1gW9GFMH0CbYBJ66P0hI/76iPfwLY=
# =MOsI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 19 Jul 2023 05:44:51 BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230719-1' of https://github.com/alistair23/qemu:
target/riscv: Fix LMUL check to use VLEN
hw/riscv: Fix typo field in error_report
target/riscv/cpu.c: check priv_ver before auto-enable zca/zcd/zcf
riscv/disas: Fix disas output of upper immediates
docs/system/target-riscv.rst: tidy CPU firmware section
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is how the content of the "RISC-V CPU firmware" section is
displayed after the html is generated:
"When using the sifive_u or virt machine there are three different
firmware boot options: 1. -bios default - This is the default behaviour
if no -bios option is included. (...) 3. -bios <file> - Tells QEMU to
load the specified file as the firmware."
It's all in the same paragraph, in a numbered list, and no special
formatting for the options.
Tidy it a bit by adding line breaks between items and its description.
Remove the numbered list. And apply formatting for the options cited in
the middle of the text.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230712143728.383528-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The test fails occasionally, see e.g.:
https://gitlab.com/thuth/qemu/-/jobs/4196177756#L489https://gitlab.com/thuth/qemu/-/jobs/4623296271#L290
It also fails on my laptop in ca. 50% of all runs. Thus disable it by
default by using the QEMU_TEST_FLAKY_TESTS environment variable to fence
it (which we also already use in flaky qtests). While we're at it, also
document this variable in docs/devel/testing.rst.
Message-Id: <20230710170155.7192-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
=RsOh
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pc,pci,virtio: cleanups, fixes, features
vhost-user-gpu: edid
vhost-user-scmi device
vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq
cleanups, fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN
# qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6
# D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd
# n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5
# cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L
# UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA=
# =RsOh
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits)
vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature
vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ
vdpa: Avoid forwarding large CVQ command failures
vdpa: Accessing CVQ header through its structure
vhost: Fix false positive out-of-bounds
vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature
vdpa: Restore MAC address filtering state
vdpa: Use iovec for vhost_vdpa_net_load_cmd()
pcie: Specify 0 for ARI next function numbers
pcie: Use common ARI next function number
include/hw/virtio: document some more usage of notifiers
include/hw/virtio: add kerneldoc for virtio_init
include/hw/virtio: document virtio_notify_config
hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments
include/hw: document the device_class_set_parent_* fns
include: attempt to document device_class_set_props
vdpa: Fix possible use-after-free for VirtQueueElement
pcie: Add hotplug detect state register to cmask
virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently the only implementers of ARI is SR-IOV devices, and they
behave similar. Share the ARI next function number.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230710153838.33917-2-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
-----BEGIN PGP SIGNATURE-----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=3XFD
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.1
* Use xl instead of mxl for disassemble
* Factor out extension tests to cpu_cfg.h
* disas/riscv: Add vendor extension support
* disas/riscv: Add support for XVentanaCondOps
* disas/riscv: Add support for XThead* instructions
* Fix mstatus related problems
* Fix veyron-v1 CPU properties
* Fix the xlen for data address when MPRV=1
* opensbi: Upgrade from v1.2 to v1.3
* Enable 32-bit Spike OpenSBI boot testing
* Support the watchdog timer of HiFive 1 rev b
* Only build qemu-system-riscv$$ on rv$$ host
* Add RVV registers to log
* Restrict ACLINT to TCG
* Add syscall riscv_hwprobe
* Add support for BF16 extensions
* KVM_RISCV_SET_TIMER macro is not configured correctly
* Generate devicetree only after machine initialization is complete
* virt: Convert fdt_load_addr to uint64_t
* KVM: fixes and enhancements
* Add support for the Zfa extension
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT
# gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij
# +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z
# vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl
# KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh
# bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde
# nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht
# ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr
# ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10
# TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI
# XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0
# ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk=
# =3XFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits)
riscv: Add support for the Zfa extension
target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM
target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper
target/riscv: update multi-letter extension KVM properties
target/riscv/cpu.c: create KVM mock properties
target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext()
target/riscv/cpu.c: add satp_mode properties earlier
target/riscv/kvm.c: add multi-letter extension KVM properties
target/riscv/kvm.c: update KVM MISA bits
target/riscv: add KVM specific MISA properties
target/riscv/cpu: add misa_ext_info_arr[]
target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU
target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs
target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids()
target/riscv: use KVM scratch CPUs to init KVM properties
target/riscv/cpu.c: restrict 'marchid' value
target/riscv/cpu.c: restrict 'mimpid' value
target/riscv/cpu.c: restrict 'mvendorid' value
hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set
target/riscv: skip features setup for KVM CPUs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
VHOST_USER_GPU_GET_EDID is defined as a message from the backend to the
frontend to retrieve the EDID data for a given scanout.
The VHOST_USER_GPU_PROTOCOL_F_EDID protocol feature is defined as a way
to check whether this new message is supported or not.
Signed-off-by: Erico Nunes <ernunes@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230626164708.1163239-3-ernunes@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As defined earlier in this file, the opening curly brace of
functions should be placed on a separate line. So we should
do it in the examples here, too.
Fixes: 821f296756 ("docs: document use of automatic cleanup functions in glib")
Reported-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20230710092638.161625-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We recently introduced "-run-with" for options that influence the
runtime behavior of QEMU. This option has the big advantage that it
can group related options (so that it is easier for the users to spot
them) and that the options become introspectable via QMP this way.
So let's start moving more switches into this option group, starting
with "-chroot" now.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <20230703074447.17044-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The allow-rpcs option accepts a comma-separated list of RPCs to
enable. This option is opposite to --block-rpcs. Using --block-rpcs
and --allow-rpcs at the same time is not allowed.
resolves: https://gitlab.com/qemu-project/qemu/-/issues/1505
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The Advanced Core Local Interruptor (ACLINT) device can
only be used with TCG. Check for TCG enabled instead of
KVM being not. Only add the property when TCG is used.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230629121103.87733-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Set the TIR default value with the SMT thread index, and place some
standard limits on SMT configurations. Now powernv is able to boot
skiboot and Linux with a SMT topology, including booting a KVM guest.
There are several SPRs and other features (e.g., broadcast msgsnd)
that are not implemented, but not used by OPAL or Linux and can be
added incrementally.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20230705120631.27670-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that we have implemented support for FEAT_LSE2, we can define
a CPU model for the Neoverse-V1, and enable it for the virt and
sbsa-ref boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230704130647.2842917-3-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
As recent CVE-2023-2861 (fixed by f6b0de53fb) once again showed, the 9p
'proxy' fs driver is in bad shape. Using the 'proxy' backend was already
discouraged for safety reasons before and we recommended to use the
'local' backend (preferably in conjunction with its 'mapped' security
model) instead, but now it is time to officially deprecate the 'proxy'
backend.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
The current sbsa-ref cannot use EHCI controller which is only
able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB.
Hence, this uses XHCI to provide a usb controller with 64-bit
DMA capablity instead of EHCI.
We bump the platform version to 0.3 with this change. Although the
hardware at the USB controller address changes, the firmware and
Linux can both cope with this -- on an older non-XHCI-aware
firmware/kernel setup the probe routine simply fails and the guest
proceeds without any USB. (This isn't a loss of functionality,
because the old USB controller never worked in the first place.) So
we can call this a backwards-compatible change and only bump the
minor version.
Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Message-id: 20230621103847.447508-2-wangyuquan1236@phytium.com.cn
[PMM: tweaked commit message; add line to docs about what
changes in platform version 0.3]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the GDB stub explicitly implements reading host files (note
that it was already possible by changing the emulated code to open and
read those files), concerns may arise that it undermines security.
Document the status quo, which is that the users are already
responsible for securing the GDB connection themselves.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230621203627.1808446-8-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-38-alex.bennee@linaro.org>
Using QOM correctly is increasingly important to maintaining a modern
code base. However the current documentation skips some important
concepts before launching into a simple example. Lets:
- at least mention properties
- mention TYPE_OBJECT and TYPE_DEVICE
- talk about why we have realize/unrealize
- mention the QOM tree
- lightly re-arrange the order we mention things
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-28-alex.bennee@linaro.org>
Lets try and keep the overview of the sub-system digestible by
splitting the core API stuff into a separate file. As QOM and QDEV
work together we should also try and enumerate the qdev_ functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-27-alex.bennee@linaro.org>
Per commit 067109a11c ("docs/devel: mention the spacing requirement
for QOM"):
For a storage structure the first declaration should always be
called “parent_obj” and for a class structure the first member
should always be called “parent_class”
Adapt the QOM rST document accordingly.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230622101717.70468-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-26-alex.bennee@linaro.org>
Give an overview of the most useful bits of the devel documentation to
read depending on what the developer wants to do.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-23-alex.bennee@linaro.org>
When new dependencies and packages are added to containers, its important to
run CI container generation pipelines on gitlab to make sure that there are no
obvious conflicts between packages that are being added and those that are
already present. Running CI container pipelines will make sure that there are
no such breakages before we commit the change updating the containers. Add a
line in the documentation reminding developers to run the pipeline before
submitting the change. It will also ease the life of the maintainers.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230506072012.10350-1-anisinha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-5-alex.bennee@linaro.org>
Loading of a VFIO device's data can take a substantial amount of time as
the device may need to allocate resources, prepare internal data
structures, etc. This can increase migration downtime, especially for
VFIO devices with a lot of resources.
To solve this, VFIO migration uAPI defines "initial bytes" as part of
its precopy data stream. Initial bytes can be used in various ways to
improve VFIO migration performance. For example, it can be used to
transfer device metadata to pre-allocate resources in the destination.
However, for this to work we need to make sure that all initial bytes
are sent and loaded in the destination before the source VM is stopped.
Use migration switchover ack capability to make sure a VFIO device's
initial bytes are sent and loaded in the destination before the source
stops the VM and attempts to complete the migration.
This can significantly reduce migration downtime for some devices.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Pre-copy support allows the VFIO device data to be transferred while the
VM is running. This helps to accommodate VFIO devices that have a large
amount of data that needs to be transferred, and it can reduce migration
downtime.
Pre-copy support is optional in VFIO migration protocol v2.
Implement pre-copy of VFIO migration protocol v2 and use it for devices
that support it. Full description of it can be found in the following
Linux commit: 4db52602a607 ("vfio: Extend the device migration protocol
with PRE_COPY").
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmScHBkeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfuZ8H/3KjLLCaGcO3jnus
P/ky3wGYx9aah/iNfRDgaaGRkPX18Eabq0BidUt/DN28yQmKgnOcbCwHlIt4QdCt
PeO9hRNLpCop63LwyQQTrSZEdVZP75CX6dRcN+6h5TsY66/ESZjBsivuJGVHIU6O
L8zJv2KKg0SKtJHsPGkUppmfyM4btmGTerqSJHv1SJfy4DJdzRMF83/WOZtE5srm
YvpgZsiztBpHbG/+jLn2mX7iaQiZQCCs+weU0ynszr5WENAnuJderjO+mo0DZkqD
j+R6LMcHHj6I4uP68eJowdTezOpoZNROh/gdUozCweA1AC/8RotkJa9UcBeEplY/
+wV8mts=
=ga0/
-----END PGP SIGNATURE-----
Merge tag 'qemu-sparc-20230628' of https://github.com/mcayland/qemu into staging
qemu-sparc queue
# -----BEGIN PGP SIGNATURE-----
#
# iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmScHBkeHG1hcmsuY2F2
# ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfuZ8H/3KjLLCaGcO3jnus
# P/ky3wGYx9aah/iNfRDgaaGRkPX18Eabq0BidUt/DN28yQmKgnOcbCwHlIt4QdCt
# PeO9hRNLpCop63LwyQQTrSZEdVZP75CX6dRcN+6h5TsY66/ESZjBsivuJGVHIU6O
# L8zJv2KKg0SKtJHsPGkUppmfyM4btmGTerqSJHv1SJfy4DJdzRMF83/WOZtE5srm
# YvpgZsiztBpHbG/+jLn2mX7iaQiZQCCs+weU0ynszr5WENAnuJderjO+mo0DZkqD
# j+R6LMcHHj6I4uP68eJowdTezOpoZNROh/gdUozCweA1AC/8RotkJa9UcBeEplY/
# +wV8mts=
# =ga0/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Jun 2023 01:40:09 PM CEST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* tag 'qemu-sparc-20230628' of https://github.com/mcayland/qemu:
escc: emulate dip switch language layout settings on SUN keyboard
target/sparc: Use tcg_gen_lookup_and_goto_ptr for v9 WRASI
target/sparc: Use DYNAMIC_PC_LOOKUP for v9 RETURN
target/sparc: Use DYNAMIC_PC_LOOKUP for JMPL
target/sparc: Use DYNAMIC_PC_LOOKUP for conditional branches
target/sparc: Introduce DYNAMIC_PC_LOOKUP
target/sparc: Drop inline markers from translate.c
target/sparc: Fix npc comparison in sparc_tr_insn_start
target/sparc: Use tcg_gen_lookup_and_goto_ptr in gen_goto_tb
Revert "hw/sparc64/niagara: Use blk_name() instead of open-coding it"
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit 93cc0506f6 ("tests/docker: Use Fedora containers
for MinGW cross-builds in the gitlab-CI") the MinGW toolchain
is packaged inside the fedora-win[32/64]-cross images.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230624142211.8888-2-philmd@linaro.org>
SUN Type 4, 5 and 5c keyboards have dip switches to choose the language layout
of the keyboard. Solaris makes an ioctl to query the value of the dipswitches
and uses that value to select keyboard layout. Also the SUN bios like the one
in the file ss5.bin uses this value to support at least some keyboard layouts.
However, the OpenBIOS provided with qemu is hardcoded to always use an US
keyboard layout.
Before this patch, qemu allways gave dip switch value 0x21 (US keyboard),
this patch uses a command line switch like
"-global escc.chnA-sunkbd-layout=de" to select dip switch value. A table is
used to lookup values from arguments like:
-global escc.chnA-sunkbd-layout=fr
-global escc.chnA-sunkbd-layout=es
But the patch also accepts numeric dip switch values directly:
-global escc.chnA-sunkbd-layout=0x2b
-global escc.chnA-sunkbd-layout=43
Both values above are the same and select swedish keyboard as explained in
table 3-15 at
https://docs.oracle.com/cd/E19683-01/806-6642/new-43/index.html
Unless you want to do a full Solaris installation but happen to have
access to a Sun bios file, the easiest way to test that the patch works
is to:
qemu-system-sparc -global escc.chnA-sunkbd-layout=sv -bios /path/to/ss5.bin
If you already happen to have a Solaris installation in a qemu disk image
file you can easily try different keyboard layouts after this patch is
applied.
Signed-off-by: Henrik Carlqvist <hc1245@poolhem.se>
Message-Id: <20230623203007.56d3d182.hc981@poolhem.se>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[MCA edit: update unsigned char to uint8_t, fix spacing issues]
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
asymmetric crypto support for cryptodev-vhost-user
rom migration when rom size changes
poison get, inject, clear; mock cxl events and irq support for cxl
shadow virtqueue offload support for vhost-vdpa
vdpa now maps shadow vrings with MAP_SHARED
max_cpus went up to 1024 and we default to smbios 3.0 for pc
Fixes, cleanups all over the place. In particular
hw/acpi: Fix PM control register access
works around a very long standing bug in memory core.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
+ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
=Do8p
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
asymmetric crypto support for cryptodev-vhost-user
rom migration when rom size changes
poison get, inject, clear; mock cxl events and irq support for cxl
shadow virtqueue offload support for vhost-vdpa
vdpa now maps shadow vrings with MAP_SHARED
max_cpus went up to 1024 and we default to smbios 3.0 for pc
Fixes, cleanups all over the place. In particular
hw/acpi: Fix PM control register access
works around a very long standing bug in memory core.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
# +ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
# N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
# iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
# 7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
# x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
# =Do8p
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 03:50:09 PM CEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
vhost-vdpa: do not cleanup the vdpa/vhost-net structures if peer nic is present
vhost_net: add an assertion for TAP client backends
intel_iommu: Fix address space unmap
intel_iommu: Fix flag check in replay
intel_iommu: Fix a potential issue in VFIO dirty page sync
vhost-user: fully use new backend/frontend naming
virtio-scsi: avoid dangling host notifier in ->ioeventfd_stop()
hw/i386/pc: Clean up pc_machine_initfn
vdpa: fix not using CVQ buffer in case of error
vdpa: mask _F_CTRL_GUEST_OFFLOADS for vhost vdpa devices
vhost: fix vhost_dev_enable_notifiers() error case
vdpa: Allow VIRTIO_NET_F_CTRL_GUEST_OFFLOADS in SVQ
vdpa: Add vhost_vdpa_net_load_offloads()
virtio-net: expose virtio_net_supported_guest_offloads()
hw/net/virtio-net: make some VirtIONet const
vdpa: reuse virtio_vdev_has_feature()
include/hw/virtio: make some VirtIODevice const
vdpa: map shadow vrings with MAP_SHARED
vdpa: reorder vhost_vdpa_net_cvq_cmd_page_len function
vdpa: do not block migration if device has cvq and x-svq=on
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The CI rules have special logic for what happens in upstream. To enable
contributors who modify CI rules to test this logic, however, they need
to be able to override which repo is considered upstream. This
introduces the 'QEMU_CI_UPSTREAM' variable
git push gitlab <branch> -o ci.variable=QEMU_CI_UPSTREAM=berrange
to make it look as if my namespace is the actual upstream. Namespace in
this context refers to the path fragment in gitlab URLs that is above
the repository. Typically this will be the contributor's gitlab login
name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-3-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We use a fixed container tag of 'latest' so that contributors' forks
don't end up with an ever growing number of containers as they work
on throwaway feature branches.
This fixed tag causes problems running CI upstream in stable staging
branches, however, because the stable staging branch will publish old
container content that clashes with that needed by primary staging
branch. This makes it impossible to reliably run CI pipelines in
parallel in upstream for different staging branches.
This introduces $QEMU_CI_CONTAINER_TAG global variable as a way to
change which tag container publishing uses. Initially it can be set
by contributors as a git push option if they want to override the
default use of 'latest' eg
git push gitlab <branch> -o ci.variable=QEMU_CONTAINER_TAG=fish
this is useful if contributors need to run pipelines for different
branches concurrently in their forks.
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create ITS as part of SBSA platform GIC initialization.
GIC ITS information is in DeviceTree so TF-A can pass it to EDK2.
Bumping platform version to 0.2 as this is important hardware change.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230619170913.517373-2-marcin.juszkiewicz@linaro.org
Co-authored-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230622143046.1578160-1-richard.henderson@linaro.org
[PMM: fixed typo; note experimental status in emulation.rst too]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CXL has 24 bit unaligned fields which need to be stored to. CXL is
specified as little endian.
Define st24_le_p() and the supporting functions to store such a field
from a 32 bit host native value.
The use of b, w, l, q as the size specifier is limiting. So "24" was
used for the size part of the function name.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230526170010.574-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We plan to add more hardware information into DeviceTree to limit amount
of hardcoded values in firmware.
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230531171834.236569-1-marcin.juszkiewicz@linaro.org
[PMM: fix format nits, add text about platform version fields from
a comment in the C source file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=543t
-----END PGP SIGNATURE-----
Merge tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu into staging
xenpvh5
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE0E4zq6UfZ7oH0wrqiU+PSHDhrpAFAmSLo0QACgkQiU+PSHDh
# rpB1Gw/9H5Cx7wQZVyKfFwnyOoP2QTedCISxC0HL5qFmUGcJY21gXaJZ10JaU/HM
# zHEJj2M17EgVCTkZVqZeKuj+nzyjbRKatT3YmFqKqFNNt5M1yQxC9BfVgso4PND/
# SY0/8BvqumgJEqD3sf76KbQAILKwahPtA42LTM7S7r2ZsmQpvmOpdOhCVugpnqs/
# FheP8N6hdlZ7GnRGtXv9QnKxMVThuE3mRCUWCyYsV/Roz6uvPsvskrdSeC3LzzBd
# Ewq56vB+qQg+WbNTgK2BcVOzV/89k9tjWsUnamfhjD2lUxfHrne1FBclhKMcHhUv
# T53zjhxjlRfmzUxC4917Krt4Tw/AaDW7v1pn6RokUq5U059Wb8q0IjzL75FOeD3o
# e9DNp+RR8py44ejfi2WHR7jqayMPVIO86uJ3usshiZ9YgK5efFAtlwN/KNR5JX8k
# Y1BR9O8BebtRymljtiLWUFXlu3xywGSA23KotT7XtzXKEaTZkIHdI395YKksYPkG
# pil0C0bh5ZW3ZWd4M/CNcVOb69R53p15O77mjmKtjnkQYJAPD6Kbc9thZ1zdWwPR
# ivFPdiTJb0FElS0ywZwezKYRKXje6E9ejXgAzgFuZI/rFdeO0HfkifiNoro1NAxK
# g4V+LE5oPt09GpL2nuHrh/y9g9MnLlXyNBhPV0CRelU6fPKIk1w=
# =543t
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 16 Jun 2023 01:48:20 AM CEST
# gpg: using RSA key D04E33ABA51F67BA07D30AEA894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>" [unknown]
# gpg: aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90
* tag 'xenpvh5-tag' of https://gitlab.com/sstabellini/qemu:
test/qtest: add xepvh to skip list for qtest
meson.build: enable xenpv machine build for ARM
hw/arm: introduce xenpvh machine
meson.build: do not set have_xen_pci_passthrough for aarch64 targets
hw/xen/xen-hvm-common: Use g_new and error_report
hw/xen/xen-hvm-common: skip ioreq creation on ioreq registration failure
include/hw/xen/xen_common: return error from xen_create_ioreq_server
xen-hvm: reorganize xen-hvm and move common function to xen-hvm-common
hw/i386/xen/xen-hvm: move x86-specific fields out of XenIOState
hw/i386/xen: rearrange xen_hvm_init_pc
hw/i386/xen/: move xen-mapcache.c to hw/xen/
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new machine xenpvh which creates a IOREQ server to register/connect with
Xen Hypervisor.
Optional: When CONFIG_TPM is enabled, it also creates a tpm-tis-device, adds a
TPM emulator and connects to swtpm running on host machine via chardev socket
and support TPM functionalities for a guest domain.
Extra command line for aarch64 xenpvh QEMU to connect to swtpm:
-chardev socket,id=chrtpm,path=/tmp/myvtpm2/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-machine tpm-base-addr=0x0c000000 \
swtpm implements a TPM software emulator(TPM 1.2 & TPM 2) built on libtpms and
provides access to TPM functionality over socket, chardev and CUSE interface.
Github repo: https://github.com/stefanberger/swtpm
Example for starting swtpm on host machine:
mkdir /tmp/vtpm2
swtpm socket --tpmstate dir=/tmp/vtpm2 \
--ctrl type=unixio,path=/tmp/vtpm2/swtpm-sock &
Signed-off-by: Vikram Garhwal <vikram.garhwal@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Most of the Aspeed machines use the UART5 device for the boot console,
and QEMU connects the first serial Chardev to this SoC device for this
purpose. See routine connect_serial_hds_to_uarts().
Nevertheless, some machines use another boot console, such as the fuji,
and commit 5d63d0c76c ("hw/arm/aspeed: Allow machine to set UART
default") introduced a SoC class attribute 'uart_default' and property
to be able to change the boot console device. It was later changed by
commit d2b3eaefb4 ("aspeed: Refactor UART init for multi-SoC machines").
The "bmc-console" machine option goes a step further and lets the user define
the UART device from the QEMU command line without introducing a new
machine definition. For instance, to use device UART3 (mapped on
/dev/ttyS2 under Linux) instead of the default UART5, one would use :
-M ast2500-evb,bmc-console=uart3
Cc: Abhishek Singh Dagur <abhishek@drut.io>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
pflash devices can be used in virt machine for different
purposes like for ROM code or S-mode FW payload. Add a
section in the documentation on how to use pflash devices
for different purposes.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230601045910.18646-4-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix a typo in the system documentation for multi-process QEMU.
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commits eea2d14117 ("Makefile: remove $(TESTS_PYTHON)",
2023-05-26) and 9c6692db55 ("tests: Use configure-provided pyvenv for
tests", 2023-05-18).
Right now, there is a conflict between wanting a ">=" constraint when
using a distro-provided package and wanting a "==" constraint when
installing Avocado from PyPI; this would provide the best of both worlds
in terms of resiliency for both distros that have required packages and
distros that don't.
The conflict is visible also for meson, where we would like to install
the latest 0.63.x version but also accept a distro 1.1.x version.
But it is worse for avocado, for two reasons:
1) we cannot use an "==" constraint to install avocado if the venv
includes a system avocado. The distro will package plugins that have
"==" constraints on the version that is included in the distro, and, using
"pip install avocado==88.1" on a venv that includes system packages will
result in this error:
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
make[1]: Leaving directory '/home/berrange/src/virt/qemu/build'
2) we cannot use ">=" either if the venv does _not_ include a system
avocado, because that would result in the installation of v101.0 which
is the one we've just reverted.
So the idea is to encode the dependencies as an (acceptable, locked)
tuple, like this hypothetical TOML that would be committed inside
python/ and used by mkvenv.py:
[meson]
meson = { minimum = "0.63.0", install = "0.63.3", canary = "meson" }
[docs]
# 6.0 drops support for Python 3.7
sphinx = { minimum = "1.6", install = "<6.0", canary = "sphinx-build" }
sphinx_rtd_theme = { minimum = "0.5" }
[avocado]
avocado-framework = { minimum = "88.1", install = "88.1", canary = "avocado" }
Once this is implemented, it would also be possible to install avocado in
pyvenv/ using "mkvenv.py ensure", thus using the distro package on Fedora
and CentOS Stream (the only distros where it's available). But until
this is implemented, keep avocado in a separate venv. There is still the
benefit of using a single python for meson custom_targets and for sphinx.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
