Needed to make sure usb redirection is prepared to actually handle the
callback from the usb host adapter. Without this interrupt endpoints
don't work on xhci.
Note: On ehci the usb_wakeup() call only schedules a BH for the actual
work, which hides this bug because the allocation happens before ehci
calls back even without this patch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1476096313-7730-1-git-send-email-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The default DMA offset is set to 3. When the property is not set by
the consumer, the default causes DMA access to be shifted by 3
bytes. In PXA, this results in incorrect DMA access, leading to error
notification in the USB controller driver. A better default would be
0, so that there is no offset, when the consumer does not specify one.
Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Reviewed-by: Deepak S. <deepak@zilogic.com>
Message-id: 1475060958-7760-1-git-send-email-vijaykumar@zilogic.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
snprintf return value is *not* the number of chars written into the
buffer, but the number of chars needed. So in case the buffer is too
small you can go alloc a bigger one and try again. But that also means
you can't simply use the return value for the next snprintf call
without checking beforehand that things did actually fit.
Problem is that usb_desc_create_serial didn't perform that check, so a
loooong path string (can happen with deep pci-bridge nesting) results in
the third snprintf call smashing the stack.
Fix this by throwing out all the snpintf calls and use g_strdup_printf
instead.
https://bugzilla.redhat.com/show_bug.cgi?id=1381630
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475659998-22045-1-git-send-email-kraxel@redhat.com
All callsites have a XHCIEPContext pointer anyway, so we can just pass
it directly instead of fiddeling with slotid and epid.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-9-git-send-email-kraxel@redhat.com
xhci_kick_epctx is a xhci_kick_ep variant which takes an XHCIEPContext
as input instead of slotid and epid. So in case we have a XHCIEPContext
at hand at the callsite we can just pass it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-7-git-send-email-kraxel@redhat.com
xhci has a fixed number of 24 (TD_QUEUE) XHCITransfer structs per
endpoint, which turns out to be a problem for usb3 devices with 32 (or
more) bulk streams. xhci re-checks the trb rings on every finished
transfer to make sure it'll pick up any pending work. But that scheme
breaks in case the first transfer of a ring can't be started because we
ran out of XHCITransfer structs already.
So remove static XHCITransfer array from XHCIEPContext. Use a linked
list instead, and allocate/free XHCITransfer as needed. Add helper
functions to allocate & initialize and to cleanup & release
XHCITransfer structs. That also simplifies trb management, we never
have to realloc XHCITransfer->trbs because we don't reuse XHCITransfer
structs any more.
New dynamic limit for in-flight xhci transfers per endpoint is
number-of-streams + 16.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-5-git-send-email-kraxel@redhat.com
EV_QUEUE must not change because an array of that size is part of live
migration data. Hard-code current value there, so we can touch TD_QUEUE
without breaking live migration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1474965172-30321-3-git-send-email-kraxel@redhat.com
Needed to avoid we run in circles forever in case the guest builds
an endless loop with link trbs.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Tested-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1476096382-7981-1-git-send-email-kraxel@redhat.com
iQEcBAABAgAGBQJX/feXAAoJEJykq7OBq3PIatAIAKoT0dQpc6L0kPM9QYX0soBR
sQ75/EyPyHK+7ly6huS0Zp78RHd98CVePdH/hn+Ha3in87ScBV/NXxgKJ/aUP8Mm
04aMkXgn0tydBndtSTom2sBHOyAl5RUCRH8JBhGQ5p+dbzfeeSU9or4UZdEiChp2
DyvmF7gjjGl8jsDl1G9KsxqOYzwgpxSVZzvzzjjK7ZlJ0fW0gkYInDIzyna/YGJP
Ea7Dc0lLN4wM7rHUk1CgTD8KzSACsmmVy4OfTUo+ij6RugtrCcsiouHqWZ3nYzbN
FHux0hXl02wnUuaZmSChgHxLDVG8pcNcWVt4wuh7wHXo8aNih8UeQLQnkdDnx9o=
=bcLW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Wed 12 Oct 2016 09:43:03 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: Add missing execution mode of guest events
trace: introduce a formal group name for trace events
trace: pass trace-events to tracetool as a positional param
trace: push reading of events up a level to tracetool main
trace: rename _read_events to read_events
trace: get rid of generated-events.h/generated-events.c
trace: dynamically allocate event IDs at runtime
trace: dynamically allocate trace_dstate in CPUState
trace: provide mechanism for registering trace events
trace: don't abort qemu if ftrace can't be initialized
trace: emit name <-> ID mapping in simpletrace header
trace: remove the TraceEventID and TraceEventVCPUID enums
trace: give each trace event a named TraceEvent struct
trace: break circular dependency in event-internal.h
trace: remove duplicate control.h includes in generated-tracers.h
trace: remove global 'uint16 dstate[]' array
trace: remove some now unused functions
trace: convert code to use event iterators
trace: add trace event iterator APIs
trace: move colo trace events to net/ sub-directory
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The declarations in the generated-tracers.h file are
assuming there's only ever going to be one instance
of this header, as they are not namespaced. When we
have one header per event group, if a single source
file needs to include multiple sets of trace events,
the symbols will all clash.
This change thus introduces a '--group NAME' arg to the
'tracetool' program. This will cause all the symbols in
the generated header files to be given a unique namespace.
If no group is given, the group name 'common' is used,
which is suitable for the current usage where there is
only one global trace-events file used for code generation.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 1475588159-30598-21-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of reading the contents of 'trace-events' from stdin,
accept the filename as a positional parameter. This also
allows for reading from multiple files, though this facility
is not used at this time.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-20-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move the reading of events out of the 'tracetool.generate'
method and into tracetool.main, so that the latter is not
tied to generating from a single source of events.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-19-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The _read_events method is used by callers outside of
its module, so should be a public method, not private.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-18-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently the generated-events.[ch] files contain the
event dstates, constants and TraceEvent structs, while the
generated-tracers.[ch] files contain the actual trace
probe logic. With the removal of usage of the event enums
from the API there is no longer any compelling reason for
the separation between these files. The generated-events.h
content is only ever needed from the generated-tracers.[ch]
files.
The enums/constants/structs from generated-events.[ch] are
thus moved into the generated-tracers.[ch], so that there
is one less file to be generated.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-17-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of having the code generator assign event IDs and
event VCPU IDs, assign them when the events are registered
at runtime. This will allow code to be generated from
individual trace-events without having to figure out
globally unique numbering at build time.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-16-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The CPUState struct has a bitmap tracking which VCPU
events are currently active. This is indexed based on
the event ID values, and sized according the maximum
TraceEventVCPUID enum value.
When we start dynamically assigning IDs at runtime,
we can't statically declare a bitmap without making
an assumption about the max event count. This problem
can be solved by dynamically allocating the per-CPU
dstate bitmap.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-15-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.
The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.
[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:
linux-user/bsd-user: initialize trace events subsystem
The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the ftrace backend is compiled into QEMU, any attempt
to start QEMU while non-root will fail due to the
inability to open /sys/kernel/debug/tracing/tracing_on.
Add a fallback into the code so that it connects up the
trace_marker_fd variable to /dev/null when getting
EACCES on the 'trace_on' file. This allows QEMU to
run, with ftrace turned into a no-op.
[Fixed s/setting/getting/ and s/EACCESS/EACCES/ errors pointed out by
Eric Blake <eblake@redhat.com>.
--Stefan]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-13-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently simpletrace assumes that events are given IDs
starting from 0, based on the order in which they appear
in the trace-events file, with no gaps. When the
trace-events file is split up, this assumption becomes
problematic.
To deal with this, extend the simpletrace format so that
it outputs a table of event name <-> ID mappings. That
will allow QEMU to assign arbitrary IDs to events without
breaking simpletrace parsing.
The v3 simple trace format was
FILE HEADER
EVENT TRACE RECORD 0
EVENT TRACE RECORD 1
...
EVENT TRACE RECORD N
The v4 simple trace format is now
FILE HEADER
EVENT MAPPING RECORD 0
EVENT MAPPING RECORD 1
...
EVENT MAPPING RECORD M
EVENT TRACE RECORD RECORD 0
EVENT TRACE RECORD RECORD 1
...
EVENT TRACE RECORD N
Although this shows all the mapping records being emitted
upfront, this is not required by the format. While the main
simpletrace backend will emit all mappings at startup,
the systemtap simpletrace.stp script will emit the mappings
at first use. eg
FILE HEADER
...
EVENT MAPPING RECORD 0
EVENT TRACE RECORD RECORD 0
EVENT TRACE RECORD RECORD 1
EVENT MAPPING RECORD 1
EVENT TRACE RECORD RECORD 2
...
EVENT TRACE RECORD N
This is more space efficient given that most trace records
only include a subset of events.
In modifying the systemtap simpletrace code, a 'begin' probe
was added to emit the trace event header, so you no longer
need to add '--no-header' when running simpletrace.py for
systemtap generated trace files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-12-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The TraceEventID and TraceEventVCPUID enums constants are
no longer actually used for anything critical.
The TRACE_EVENT_COUNT limit is used to determine the size
of the TraceEvents array, and can be removed if we just
NULL terminate the array instead.
The TRACE_VCPU_EVENT_COUNT limit is used as a magic value
for marking non-vCPU events, and also for declaring the
size of the trace dstate mask in the CPUState struct.
The former usage can be replaced by a dedicated constant
TRACE_EVENT_VCPU_NONE, defined as (uint32_t)-1. For the
latter usage, we can simply define a constant for the
number of VCPUs, avoiding the need for the full enum.
The only other usages of the enum values can be replaced
by accesing the id/vcpu_id fields via the named TraceEvent
structs.
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-11-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently we only expose a TraceEvent array, which must
be indexed via the TraceEventID enum constants. This
changes the generator to expose a named TraceEvent
instance for each event, with an _EVENT suffix.
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-10-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently event-internal.h includes generated-events.h,
while generated-events.h includes event-internal.h
causing a circular dependency.
event-internal.h requires that the content of
generated-events.h comes first, so that it can see
the typedefs for TraceEventID and TraceEventVCPUID.
Switching the TraceEvent struct to use uint32_t
for the two ID fields removes the dependency on
the typedef, allowing events-internal.h to be a
self-contained header. This will then let the patch
following this move event-internal.h to the top of
generated-events.h, so we can expose TraceEvent
struct variables in generated-events.h
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-9-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The format/h.py file adds an include for control.h to
generated-tracers.h. ftrace, log and syslog, then
add more duplicate includes for control.h.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-8-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of having a global dstate array, declare a single
'uint16 TRACE_${EVENT_NAME}_DSTATE' variable for each
trace event. Record a pointer to this variable in the
TraceEvent struct too.
By turning trace_event_get_state_dynamic_by_id into a
macro, this still hits the fast path, and cache affinity
is ensured by declaring all the uint16 vars adjacent to
each other.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-7-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The trace_event_count, trace_event_id and
trace_event_pattern methods are no longer required
now that everything is using the iterator APIs
The trace_event_set_state and trace_event_set_vcpu_state
macros were also unused.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-6-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This converts the HMP/QMP monitor API implementations
and some internal trace control methods to use the new
trace event iterator APIs.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 1475588159-30598-5-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently methods which want to iterate over trace events,
do so using the trace_event_count() and trace_event_id()
methods. This leaks the concept of a single ID enum to
the callers. There is an alternative trace_event_pattern()
method which can be used in an iteration context, but its
design is stateless, so is not easy to expand it in the
future.
This defines a formal iterator API will provide a future-
proof way of iterating over events.
The iterator is also able to apply a pattern match filter
to events, further removing the need for the pattern
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-4-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The colo patch series added various trace events to the top
level trace-events file, despite the files using them being
in a sub-dir.
commit 30656b097e
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:34 2016 +0800
filter-rewriter: rewrite tcp packet to keep secondary connection
commit f4b618360e
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:31 2016 +0800
colo-compare: add TCP, UDP, ICMP packet comparison
We add TCP,UDP,ICMP packet comparison to replace
IP packet comparison. This can increase the
accuracy of the package comparison.
Less checkpoint more efficiency.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
commit 0682e15b19
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:30 2016 +0800
colo-compare: introduce packet comparison thread
commit 59509ec16b
Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Date: Tue Sep 27 10:22:27 2016 +0800
net/colo.c: add colo.c to define and handle packet
This moves all events into net/trace-events where they
were supposed to live.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-2-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
C99 requires SIZE_MAX to be declared with the same type as the
integral promotion of size_t, but OSX mistakenly defines it as
an 'unsigned long long' expression even though size_t is only
'unsigned long'. Rather than futzing around with whether size_t
is 32- or 64-bits wide (which would be needed if we cared about
using SIZE_T in a #if expression), just hard-code it with a cast.
This is not a strict C99-compliant definition, because it doesn't
work in the preprocessor, but if we later need that, the build
will break on Mac to inform us to improve our replacement at that
time.
See also https://patchwork.ozlabs.org/patch/542327/ for an
instance where the wrong type trips us up if we don't fix it
for good in osdep.h.
Some versions of glibc make a similar mistake with SSIZE_MAX; the
goal is that the approach of this patch could be copied to work
around that problem if it ever becomes important to us.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1476200784-17210-1-git-send-email-eblake@redhat.com
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJX+LTGAAoJEHAbT2saaT5ZIBwH+wfho+xxruEjro6qPvSAtdKk
BBsOWBfBoqWfbAbOxxCO8ina2nA7p5XbyzSXUr94nZhvZMB9BkgL6la03gdS0Yr2
jHf0J9mM8fIbMQFsEKGOPcdpvU7VEXeFwridZYzypiRvbNSdWK3SKVBKgz2ADNhb
l4Tos81IZeH/mw8HcU3XgSGSTV4JuKP4XsnmwlFMa8/sWM/X3vVgx5IG26KURZQm
pW720jcX0meSfji5YvhspfbBbp1g2EorTZb6iLcZf+OUIB6XkViMisVasnyOo2HJ
cehPlhAHixwq1kXGItc1fs11VloZ6hvEZ7kZ615jAdsD2sGJObtGDxgyJW3+gPo=
=HPHj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging
trivial patches for 2016-10-08
# gpg: Signature made Sat 08 Oct 2016 09:56:38 BST
# gpg: using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* remotes/mjt/tags/trivial-patches-fetch: (26 commits)
net/filter-mirror: Fix mirror initial check typo
virtio: rename the bar index field name in VirtIOPCIProxy
linux-user: include <poll.h> instead of <sys/poll.h>
char: fix missing return in error path for chardev TLS init
CODING_STYLE: Fix a typo ("have" vs. "has")
bitmap: refine and move BITMAP_{FIRST/LAST}_WORD_MASK
build-sys: fix find-in-path
m68k: change default system clock for m5208evb
exec: remove unused compacted argument
usb: ehci: fix memory leak in ehci_process_itd
qapi: make the json schema files more regular.
maint: Add module_block.h to .gitignore
MAINTAINERS: Some updates related to the SH4 machines
MAINTAINERS: Add some more MIPS related files
MAINTAINERS: Add usermode related config files
MAINTAINERS: Add some more pattern to recognize all win32 related files
MAINTAINERS: Add some more rocker related files
MAINTAINERS: Add header files to CRIS section
MAINTAINERS: Add some more files to the virtio section
MAINTAINERS: Add some SPARC machine related files
...
# Conflicts:
# MAINTAINERS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qmII
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-10-07' into staging
QAPI patches for 2016-10-07
# gpg: Signature made Fri 07 Oct 2016 18:55:40 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-10-07:
docs: Belatedly update for move of QMP/* to docs/
docs: Belatedly update for move of qmp-commands.txt
qmp: Disable query-cpu-* commands when they're unavailable
MAINTAINERS: Pass the QObject staff from Luiz to Markus
MAINTAINERS: Pass the HMP staff from Luiz to David
qapi: return a 'missing parameter' error
qapi: assert list entry has a value
qapi: add assert about root value
tests/test-qmp-input-strict: Cover missing struct members
qapi: Fix crash when 'any' or 'null' parameter is missing
qmp: fix object-add assert() without props
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Trigger Mode field of IOAPIC must match the Trigger Mode in
the IRTE according to VT-d Spec 5.1.5.1.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro. The device virtio-gpu is
special because it actually does not adhere to the virtio migration
schema, because device state is last.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the new VMSTATE_VIRTIO_DEVICE macro.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Hans de Goede
Vijay Kumar B
Gerd Hoffmann
Peter Maydell
Lluís Vilanova
Daniel P. Berrange
Eric Blake
Feng Wu
Halil Pasic