Commit Graph

10448 Commits

Author SHA1 Message Date
Hans de Goede
4c5d82ecf1 xhci: Init a transfers xhci, slotid and epid member on epctx alloc
Transfers are part of an epctx, which is part of a slot, which is part of
a xhci. Transfers cannot dynamically be moved from one epctx to another,
so once created their xhci, slotid and epid are constant, so lets set these
up at creation time, rather then re-initializing them with the same
value each time a transfer gets submitted.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-19 11:28:40 +02:00
Hans de Goede
d063c3112c xhci: Fix number of streams allocated when using streams
According to the xhci spec the total number of streams is
2 ^ (MaxPStreams + 1), and this is also how the Linux xhci driver
uses this field.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-19 11:28:40 +02:00
Gerd Hoffmann
b5613fdcb0 usb: remove old usb-host code
The usb-host code has been rewritten for qemu 1.5 to use libusb,
the old code has been left in as temporary fallback.  Now we are
two releases further out, targeting the 1.7 release.  No major
issues with the new code poped up until now.  Time to remove it
from tre tree.  Should we ever need it again for some reason --
git has a copy for us in the history.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-19 11:28:40 +02:00
Anthony Liguori
5dc11192b2 Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Max Reitz (16) and others
# Via Kevin Wolf
* kwolf/for-anthony: (33 commits)
  qemu-iotests: Fix test 038
  block: Assert validity of BdrvActionOps
  qemu-iotests: Cleanup test image in test number 007
  qemu-img: fix invalid JSON
  coroutine: add ./configure --disable-coroutine-pool
  qemu-iotests: Adjustments due to error propagation
  qcow2: Use Error parameter
  qemu-img create: Emit filename on error
  block: Error parameter for create functions
  block: Error parameter for open functions
  bdrv: Use "Error" for creating images
  bdrv: Use "Error" for opening images
  qemu-iotests: add 057 internal snapshot for block device test case
  hmp: add interface hmp_snapshot_delete_blkdev_internal
  hmp: add interface hmp_snapshot_blkdev_internal
  qmp: add interface blockdev-snapshot-delete-internal-sync
  qmp: add interface blockdev-snapshot-internal-sync
  qmp: add internal snapshot support in qmp_transaction
  snapshot: distinguish id and name in snapshot delete
  snapshot: new function bdrv_snapshot_find_by_id_and_name()
  ...

Message-id: 1379073063-14963-1-git-send-email-kwolf@redhat.com
2013-09-17 09:51:40 -05:00
Anthony Liguori
7d41364e71 Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
  spapr-vscsi: Report error on unsupported MAD requests
  spapr-vscsi: Adding VSCSI capabilities
  iscsi: split discard requests in multiple parts
  iscsi: add .bdrv_get_block_status
  iscsi: add logical block provisioning information to iscsilun
  hw/scsi/lsi53c895a: Use deposit32 rather than handcoded shift/mask
  hw/scsi/lsi53c895a: Use sextract32 for sign-extension
  scsi: Fix scsi_bus_legacy_add_drive() scsi-generic with serial
  virtio-scsi: Make type virtio-scsi-common abstract
  spapr-vscsi: add task management
  scsi: prefer UUID to VM name for the initiator name

Message-id: 1378984634-765-1-git-send-email-pbonzini@redhat.com
2013-09-17 09:50:23 -05:00
Markus Armbruster
7f87af39dc pc_sysfw: Fix ISA BIOS init for ridiculously big flash
pc_isa_bios_init() suffers integer overflow for flash larger than
INT_MAX.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1375276272-15988-9-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-12 11:45:32 -05:00
Alexey Kardashevskiy
f4ff3b7ba1 spapr-vscsi: Report error on unsupported MAD requests
The existing driver just dropped unsupported requests. This adds error
responses to those unhandled requests.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 13:15:54 +02:00
Nikunj A. Dadhania
26573a0c1f spapr-vscsi: Adding VSCSI capabilities
This implements capabilities exchange between vscsi host and client.  As
at the moment no capability is supported, put zero flags everywhere and
return.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
2013-09-12 13:15:54 +02:00
Max Reitz
34b5d2c68e block: Error parameter for open functions
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.

Signed-off-by: Max Reitz <mreitz@redhat.com>
2013-09-12 10:12:48 +02:00
Peter Maydell
57ffcc4c83 hw/scsi/lsi53c895a: Use deposit32 rather than handcoded shift/mask
Use deposit32() rather than handcoded shifts/masks to update the
scratch registers. This is cleaner and incidentally avoids a clang
sanitizer complaint ("runtime error: left shift of 255 by 24 places
cannot be represented in type 'int'").

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Peter Maydell
927941059b hw/scsi/lsi53c895a: Use sextract32 for sign-extension
Use sextract32() for doing sign-extension rather than rolling
our own implementation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Markus Armbruster
c24e7517ee scsi: Fix scsi_bus_legacy_add_drive() scsi-generic with serial
scsi_bus_legacy_add_drive() creates either a scsi-disk or a
scsi-generic device.  It sets property "serial" to argument serial
unless null.  Crashes with scsi-generic, because it doesn't have such
the property.

Only usb_msd_initfn_storage() passes non-null serial.  Reproducer:

    $ qemu-system-x86_64 -nodefaults -display none -S -usb \
    -drive if=none,file=/dev/sg1,id=usb-drv0 \
    -device usb-storage,id=usb-msd0,drive=usb-drv0,serial=123
    qemu-system-x86_64: -device usb-storage,id=usb-msd0,drive=usb-drv0,serial=123: Property '.serial' not found
    Aborted (core dumped)

Fix by handling exactly like "removable": set the property only when
it exists.

Cc: qemu-stable@nongnu.org
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Markus Armbruster
a27292b5d7 virtio-scsi: Make type virtio-scsi-common abstract
It's the abstract base of virtio-scsi-device and vhost-scsi.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Alexey Kardashevskiy
eb37f14658 spapr-vscsi: add task management
At the moment the guest kernel issues two types of task management
requests to the hypervisor - task about and lun reset. This adds
handling for these tasks. As spapr-vscsi starts calling scsi_req_cancel(),
free_request callback was implemented.

As virtio-vscsi, spapr-vscsi does not handle CLEAR_ACA either as CDB
control byte does not seem to be used at all so NACA bit is not
set to the guest so the guest has no good reason to call CLEAR_ACA task.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[Fix choice of UCSOLCNT vs. SCSOLCNT. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-09-12 08:46:21 +02:00
Anthony Liguori
2d1fe1873a ARM queue:
* aarch64 preparation patchset (excluding the defconfigs, so this
    doesn't actually enable the new targets yet)
  * minor bugfixes and cleanups
  * disable "-cpu any" in system emulation mode
  * fix ARMv7M stack alignment on reset
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJSL2jzAAoJEDwlJe0UNgzesqIP/0pn2qoSv6BXSjVHAlbGvOtC
 n4ZF6Aeoc+S9vvWbKk/2mCGNyf2ewokVCrekMSjWeD4i0WQwLPAIbwZ4RTmketCt
 KqJQQ2JrFQyu5xTlooc4NrAuO8XllEtFIdIl/Aob9HyZvlNQR+l81GP0LqipiTLz
 Dto1Cxack8BpOopy8hxBnR4xcE3yz9e+9b2P7iONJ4TYzs7vheu0j4qMOZtNyw/T
 mf7yKrv+YzvlbJJgM3tK9sgBShtGqyxgW6YO5OHrsM/D/9wc+ML6k3iMpf7Sr2RF
 1/P0xUZBkaXht3ZDBU/EOG5Gi+AqoPS2K/Quu/NFADn7dpV+qAeukiCHnhhCtPHc
 AbSl6oaHjpfEPC7JaORIdzu8+GAIhT6fWP4MNa0bkWtatGh3OXJvMboalu1jtARE
 DCpTvA4pRyjJ8WFO/CYASxeeFeZX7DYCy4RYklSk7cbQ5xH9n2Jq3g/92y+07KnQ
 bZYpP57Lor8p2bHenr8p9V/dIlIKTgQkcgqIumNSSrIBU4NCVb2G566kfTSKZy4S
 Alq/dmWs3oxmidviz8HT0aX6tVJgFU2rkIVE4nCZjCH/0fQYU7NVfMshFNLar8zQ
 lCe1K7Yiv+u6W/bgUIG3AM1GVbsb8X2YKNTEUXOls54Jzjep3lQrsoVCaaQLgaI5
 Cz+uCGX+4x4Pe9h6XWDk
 =oraU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130910' into staging

ARM queue:
 * aarch64 preparation patchset (excluding the defconfigs, so this
   doesn't actually enable the new targets yet)
 * minor bugfixes and cleanups
 * disable "-cpu any" in system emulation mode
 * fix ARMv7M stack alignment on reset

# gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found

# By Alexander Graf (13) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130910: (28 commits)
  configure: Add handling code for AArch64 targets
  linux-user: Add AArch64 support
  linux-user: Allow targets to specify a minimum uname release
  linux-user: Add AArch64 termbits.h definitions
  linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64
  linux-user: Make sure NWFPE code is 32 bit ARM only
  linux-user: Add signal handling for AArch64
  linux-user: Fix up AArch64 syscall handlers
  linux-user: Add syscall number definitions for AArch64
  linux-user: Add cpu loop for AArch64
  linux-user: Don't treat AArch64 cpu names specially
  target-arm: Add AArch64 gdbstub support
  target-arm: Add AArch64 translation stub
  target-arm: Prepare translation for AArch64 code
  target-arm: Disable 32 bit CPUs in 64 bit linux-user builds
  target-arm: Add new AArch64CPUInfo base class and subclasses
  target-arm: Pass DisasContext* to gen_set_pc_im()
  target-arm: Fix target_ulong/uint32_t confusions
  target-arm: Export cpu_env
  target-arm: Extract the disas struct to a header file
  ...

Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:46:52 -05:00
Anthony Liguori
d985bd4d55 Merge remote-tracking branch 'spice/spice.v73' into staging
# By Gerd Hoffmann (2) and Christophe Fergeau (1)
# Via Gerd Hoffmann
* spice/spice.v73:
  qxl: fix local renderer
  qxl: trace io port name
  spice-core: Use g_strdup_printf instead of snprintf

Message-id: 1378807572-27902-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:46:26 -05:00
Anthony Liguori
a640f07c0d Merge remote-tracking branch 'kraxel/usb.89' into staging
# By Gerd Hoffmann (2) and Miroslav Rezanina (2)
# Via Gerd Hoffmann
* kraxel/usb.89:
  ehci: save device pointer in EHCIState
  Remove dev-bluetooth.c dependency from vl.c
  Preparation for usb-bt-dongle conditional build
  usb: sanity check setup_index+setup_len in post_load

Message-id: 1378806073-25197-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:46:21 -05:00
Anthony Liguori
f69f0bcac9 Merge remote-tracking branch 'mdroth/qga-pull-2013-9-9' into staging
# By Tomoki Sekiyama (10) and Paul Burton (1)
# Via Michael Roth
* mdroth/qga-pull-2013-9-9:
  QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command
  qemu-ga: Install Windows VSS provider on `qemu-ga -s install'
  qemu-ga: Call Windows VSS requester in fsfreeze command handler
  qemu-ga: Add Windows VSS provider and requester as DLL
  error: Add error_set_win32 and error_setg_win32
  qemu-ga: Add configure options to specify path to Windows/VSS SDK
  Add a script to extract VSS SDK headers on POSIX system
  checkpatch.pl: Check .cpp files
  Add c++ keywords to QAPI helper script
  configure: Support configuring C++ compiler
  mips_malta: support up to 2GiB RAM

Message-id: 1378755701-2051-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:46:08 -05:00
Anthony Liguori
97fdb9410b Merge remote-tracking branch 'sstabellini/xen-2013-09-09' into staging
# By Anthony PERARD
# Via Stefano Stabellini
* sstabellini/xen-2013-09-09:
  pc_q35: Initialize Xen.
  pc: Initializing ram_memory under Xen.

Message-id: alpine.DEB.2.02.1309091718030.6397@kaball.uk.xensource.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:45:57 -05:00
Anthony Liguori
964737ea19 Merge remote-tracking branch 'stefanha/block' into staging
# By Paolo Bonzini (21) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
  qemu-iotests: Fixed test case 026
  qemu-iotests: Whitespace cleanup
  dataplane: Fix startup race.
  block: look for zero blocks in bs->file
  block: add default get_block_status implementation for protocols
  raw-posix: report unwritten extents as zero
  raw-posix: return get_block_status data and flags
  docs, qapi: document qemu-img map
  qemu-img: add a "map" subcommand
  block: return BDRV_BLOCK_ZERO past end of backing file
  block: use bdrv_has_zero_init to return BDRV_BLOCK_ZERO
  block: return get_block_status data and flags for formats
  block: define get_block_status return value
  block: introduce bdrv_get_block_status API
  block: make bdrv_has_zero_init return false for copy-on-write-images
  qemu-img: always probe the input image for allocated sectors
  block: expect errors from bdrv_co_is_allocated
  block: remove bdrv_is_allocated_above/bdrv_co_is_allocated_above distinction
  block: do not use ->total_sectors in bdrv_co_is_allocated
  block: make bdrv_co_is_allocated static
  ...

Message-id: 1378481953-23099-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-11 14:45:37 -05:00
Peter Maydell
031c44e4de pl110: Clarify comment about PL110 ID on VersatilePB
Clarify a comment about the ID register value presented by
the PL110 variant present on the VersatilePB board (based
on testing what the actual hardware does), to indicate that
this is not an error in our emulation, and to remove an #if-0.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10 19:09:33 +01:00
Gerd Hoffmann
adbecc8973 ehci: save device pointer in EHCIState
We'll need a pointer to the actual pci/sysbus device,
stick a pointer to it into the EHCIState struct.

https://bugzilla.redhat.com/show_bug.cgi?id=1005495

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:42 +02:00
Miroslav Rezanina
615fe4de4b Remove dev-bluetooth.c dependency from vl.c
Use usb_legacy_register handling to create bt-dongle device and remove code
dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:42 +02:00
Miroslav Rezanina
644e1a8a34 Preparation for usb-bt-dongle conditional build
To allow disable usb-bt-dongle device using CONFIG_BLUETOOTH option, some of
functions in vl.c file has to be made accessible in dev-bluetooth.c. This is
pure code moving.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:41 +02:00
Gerd Hoffmann
c60174e847 usb: sanity check setup_index+setup_len in post_load
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:41 +02:00
Gerd Hoffmann
c58c7b959b qxl: fix local renderer
The local spice renderer assumes the primary surface is located at the
start of the "ram" bar.  This used to be a requirement in qxl hardware
revision 1.  In revision 2+ this is relaxed.  Nevertheless guest drivers
continued to use the traditional location, for historical and backward
compatibility reasons.  The qxl kms driver doesn't though as it depends
on qxl revision 4+ anyway.

Result is that local rendering is hosed for recent linux guests, you'll
get pixel garbage with non-spice ui (gtk, sdl, vnc) and when doing
screendumps.  Fix that by doing a proper mapping of the guest-specified
memory location.

https://bugzilla.redhat.com/show_bug.cgi?id=948717

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:08 +02:00
Gerd Hoffmann
18b203850a qxl: trace io port name
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:08 +02:00
Tomoki Sekiyama
6f88009ee5 Add c++ keywords to QAPI helper script
Add c++ keywords to avoid errors in compiling with c++ compiler.
This also renames class member of PciDeviceInfo to q_class.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:56 -05:00
Paul Burton
94c2b6aff4 mips_malta: support up to 2GiB RAM
A Malta board can support up to 2GiB of RAM. Since the unmapped kseg0/1
regions are only 512MiB large & the latter 256MiB of those are taken up
by the IO region, access to RAM beyond 256MiB must be done through a
mapped region. In the case of a Linux guest this means we need to use
highmem.

The mainline Linux kernel does not support highmem for Malta at this
time, however this can be tested using the linux-mti-3.8 kernel branch
available from:

  git://git.linux-mips.org/pub/scm/linux-mti.git

You should be able to boot a Linux kernel built from the linux-mti-3.8
branch, with CONFIG_HIGHMEM enabled, using 2GiB RAM by passing "-m 2G"
to QEMU and appending the following kernel parameters:

  mem=256m@0x0 mem=256m@0x90000000 mem=1536m@0x20000000

Note that the upper half of the physical address space of a Malta
mirrors the lower half (hence the 2GiB limit) except that the IO region
(0x10000000-0x1fffffff in the lower half) is not mirrored in the upper
half. That is, physical addresses 0x90000000-0x9fffffff access RAM
rather than the IO region, resulting in a physical address space
resembling the following:

  0x00000000 -> 0x0fffffff  RAM
  0x10000000 -> 0x1fffffff  I/O
  0x20000000 -> 0x7fffffff  RAM
  0x80000000 -> 0x8fffffff  RAM (mirror of 0x00000000 -> 0x0fffffff)
  0x90000000 -> 0x9fffffff  RAM
  0xa0000000 -> 0xffffffff  RAM (mirror of 0x20000000 -> 0x7fffffff)

The second mem parameter provided to the kernel above accesses the
second 256MiB of RAM through the upper half of the physical address
space, making use of the aliasing described above in order to avoid
the IO region and use the whole 2GiB RAM.

The memory setup may be seen as 'backwards' in this commit since the
'real' memory is mapped in the upper half of the physical address space
and the lower half contains the aliases. On real hardware it would be
typical to see the upper half of the physical address space as the alias
since the bus addresses generated match the lower half of the physical
address space. However since the memory accessible in the upper half of
the physical address space is uninterrupted by the IO region it is
easiest to map the RAM as a whole there, and functionally it makes no
difference to the target code.

Due to the requirements of accessing the second 256MiB of RAM through
a mapping to the upper half of the physical address space it is usual
for the bootloader to indicate a maximum of 256MiB memory to a kernel.
This allows kernels which do not support such access to boot on systems
with more than 256MiB of RAM. It is also the behaviour assumed by Linux.
QEMUs small generated bootloader is modified to provide this behaviour.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-09 18:42:22 +02:00
Anthony PERARD
254c12825f pc_q35: Initialize Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-09 16:24:33 +00:00
Anthony PERARD
04d7bad8a4 pc: Initializing ram_memory under Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
CC: qemu-stable@nongnu.org
2013-09-09 16:22:19 +00:00
Aurelien Jarno
45d883dcf2 ne2000: mark I/O as LITTLE_ENDIAN
Now that the memory subsystem is propagating the endianness correctly,
the ne2000 device should have its I/O ports marked as LITTLE_ENDIAN, as
PCI devices are little endian.

This makes the ne2000 NIC to work again on PowerPC.

Cc: qemu-stable@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:27:40 +02:00
Brad Smith
3dbb9786e9 vmxnet3: Eliminate __packed redefined warning
This eliminates a warning about __packed being redefined as exposed by the
vmxnet3 code. __packed is not used anywhere in the vmxnet3 code.

  CC    hw/net/vmxnet3.o
In file included from hw/net/vmxnet3.c:29:
hw/net/vmxnet3.h:37:1: warning: "__packed" redefined
In file included from /usr/include/stdlib.h:38,
                 from /buildbot-qemu/default_openbsd_current/build/include/qemu-common.h:26,
                 from /buildbot-qemu/default_openbsd_current/build/include/hw/hw.h:5,
                 from hw/net/vmxnet3.c:18:
/usr/include/sys/cdefs.h:209:1: warning: this is the location of the previous definition

Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:25:55 +02:00
Vincenzo Maffione
e9845f0985 e1000: add interrupt mitigation support
This patch partially implements the e1000 interrupt mitigation mechanisms.
Using a single QEMUTimer, it emulates the ITR register (which is the newer
mitigation register, recommended by Intel) and approximately emulates
RADV and TADV registers. TIDV and RDTR register functionalities are not
emulated (RDTR is only used to validate RADV, according to the e1000 specs).

RADV, TADV, TIDV and RDTR registers make up the older e1000 mitigation
mechanism and would need a timer each to be completely emulated. However,
a single timer has been used in order to reach a good compromise between
emulation accuracy and simplicity/efficiency.

The implemented mechanism can be enabled/disabled specifying the command
line e1000-specific boolean parameter "mitigation", e.g.

    qemu-system-x86_64 -device e1000,mitigation=on,... ...

For more information, see the Software developer's manual at
http://download.intel.com/design/network/manuals/8254x_GBe_SDM.pdf.

Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de> (for pc-* machines)
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:25:52 +02:00
Cornelia Huck
8caf907f07 dataplane: Fix startup race.
Avoid trying to setup dataplane again if dataplane setup is already in
progress. This may happen if an eventfd is triggered during setup.

I saw this occasionally with an experimental s390 irqfd implementation:

virtio_blk_handle_output
-> virtio_blk_data_plane_start
-> virtio_ccw_set_host_notifier
...
-> virtio_queue_set_host_notifier_fd_handler
-> virtio_queue_host_notifier_read
-> virtio_queue_notify_vq
-> virtio_blk_handle_output
-> virtio_blk_data_plane_start
-> vring_setup
-> hostmem_init
-> memory_listener_register
-> BOOM

As virtio-ccw tries to follow what virtio-pci does, it might be triggerable
for other platforms as well.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Fam Zheng
c0777fe18b xen_disk: simplify blk_disconnect with refcnt
We call bdrv_attach_dev when initializing whether or not bs is created
locally, so call bdrv_detach_dev and let the refcnt handle the
lifecycle.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Fam Zheng
4f6fd3491c block: make bdrv_delete() static
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.

This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Anthony Liguori
aaa6a40194 QOM CPUState refactorings / X86CPU
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
 * Document X86CPU magic numbers for CPUID cache info
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJgdaAAoJEPou0S0+fgE/WqAQAJ6pcTymZO86NLKwcY4dD5Dr
 Es2aTs4XFs9V3+gpbH9vOA71n9HanFQp1s4ZUskQ2BVQU8cZeRUKlGhKJfqcEbPF
 H5wkxskqgV2Sw8+XWjQk80J/X/W6k10Fit64CUpQqxzd3HwXXzT/QHXzM8t6p79i
 KdEAsjaQYqR8/qa7+pd437lLcTiRb51FqB5u3ClbCbIKjnnjswr/ZypKr+CUc9WY
 1AzP9UKg0qSxz1yCkgzYHt3eWjfuGhsqn8KXVQfc+37xFRZp0uYQYkCahhwrPRUO
 jTg0eJKxoyH76t+2jIsnNHfd6r5zaTmVThGnun/SzJTGj8AFNrz81EfT1niJdp2/
 6RdykpWdqqeA3usKoSzBgTEAXGL50tCL0xiREk7hPwflxJqjbjFuVuttkazEcHZf
 Q2OS0tUFhYi3yUojms/YJYFUaNUhA033wJSjKGbFfSDdtJdjnxmB2r+LhsH4ByfS
 4SPU5zr4up1Yr1dnmIlNUA5W/KMgZseT3shasLhFmODR7wGvrQ7DuEHRs87UQbbM
 pedvN92VmWzByEvLNkICJGuaVer+mHznig9f1eOkxXlK4RdNBmAf5QYMU+oxbkUG
 fwXu0w7/aUJKpcYl6aYUmkhgn9dB3Oe/WTVLkvfg54MUFKpo4b72AR01+fWT91XO
 r8DQQYwP94htozAC6F9n
 =/bSY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging

QOM CPUState refactorings / X86CPU

* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info

# gpg: Signature made Tue 03 Sep 2013 10:59:22 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (3) and Eduardo Habkost (1)
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
  target-i386: Use #defines instead of magic numbers for CPUID cache info
  cpu: Replace qemu_for_each_cpu()
  cpu: Use QTAILQ for CPU list
  a15mpcore: Use qemu_get_cpu() for generic timers
2013-09-03 12:33:32 -05:00
Anthony Liguori
5a93d5c2ab Merge remote-tracking branch 'mjt/trivial-patches' into staging
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  aio / timers: use g_usleep() not sleep()
  adlib: sort offsets in portio registration
  qmp: fix integer usage in examples
  tci: Remove function tcg_out64 (fix broken build)
  target-arm: Report unimplemented opcodes (LOG_UNIMP)
  pflash_cfi02.c: fix debug macro
  configure: Remove unneeded redirections of stderr (pkg-config --exists)
  configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
  configure: Don't write .pyc files by default (python -B)
  curl: qemu_bh_new() can never return NULL
  slirp/arp_table.c: Avoid shifting into sign bit of signed integers
  configure: disable clang -Wstring-plus-int warning
  rdma: silly ipv6 bugfix
  misc: Fix some typos in names and comments
  slirp: Port redirection option behave differently on Linux and Windows

Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03 12:31:44 -05:00
Anthony Liguori
9ea0f58fc7 Merge remote-tracking branch 'kraxel/usb.88' into staging
# By Gerd Hoffmann (10) and Marcel Apfelbaum (1)
# Via Gerd Hoffmann
* kraxel/usb.88:
  usb/dev-hid: Modified usb-tablet category from Misc to Input
  Revert "usb-hub: report status changes only once"
  usb-hub: add tracepoint for status reports
  usb: parallelize usb3 streams
  uas: add property for request logging
  xhci: reset port when disabling slot
  xhci: emulate intr endpoint intervals correctly
  xhci: fix endpoint interval calculation
  xhci: add port to slot_address tracepoint
  xhci: add tracepoint for endpoint state changes
  xhci: remove leftover debug printf

Message-id: 1378117055-29620-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03 12:31:30 -05:00
Anthony Liguori
9889e04ac1 pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
 and a virtio bugfix for level interrupts.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
 hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
 pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
 hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
 l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
 r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
 =SytJ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

pc,pci,virtio fixes and cleanups

This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found

# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
  virtio_pci: fix level interrupts with irqfd
  pc: reduce duplication, fix PIIX descriptions
  hw: Clean up bogus default boot order
  pci: add config space access traces
  pc: fix regression for 64 bit PCI memory
  pci: Introduce helper to retrieve a PCI device's DMA address space

Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-03 12:31:07 -05:00
Anthony Liguori
5cff81f098 QOM device refactorings
* Fix QOM and ISA documentation errors
 * Extend object_initialize() et al. to check the instance size
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJSIPBUAAoJEPou0S0+fgE/Wo0QAISAHVdHBvG7YzrgnpX89hCC
 MCqk5ny0FDZtlJXI5mqitgtBC0aqdhwgRxxfxjZ0/g7e8NysPUkWU9Zn7b/6WWKu
 A4ckRqxAVR6ZR0TNX9XvcoMoaebN0v5cfXDGjjqizs8HXdfs1bbAK5husMTka5df
 qDgRoFPEd1NmA/qpTu7EK74dIRkiB0o5c7Iyc8tNdkFK6it3fn8FW4fL0mk/61dc
 5VwZaIb1UMg8RAh/LMbdnIanWHYM8Yg7DMljdA4frZ53x5R82HxedfGB36L7YRwF
 GlgjxUn+/M1ZFdnzlX+cc330q82K0Tg3C94su1tR/3FuY+Da/9f97/e5WAYIN3v1
 peneh6szGemqRJD1TxBxvoq2GDHVIgx7xcsHjyOWfy08XDcO0UUF7WU1dNddhEl8
 9DX1tihSZJNugKoB2QNBZWcn1FPVAnxpbUfsAt/m1kdbxGPnOM2McEIOwabcQhNl
 odht/aEKB5A8TeRxFKBwozMXxFjh7AX2m8/YsQlApBWKefIV3411/WmO2tEg5kts
 1vO5ZyBM8lOoO5QK/Uvqne0hi/8hALyoO3v9e2IIAd3yE9hYUhk/sQ5our/bfW+M
 auiaoTcVvpFac1nBTsvY4Be1e+B2xqMMxLpsvsmENHcEUCOcAsbCXG/t1NkJR66+
 ZQLaX5ioxgd37zKIY8dT
 =LiUs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging

QOM device refactorings

* Fix QOM and ISA documentation errors
* Extend object_initialize() et al. to check the instance size

# gpg: Signature made Fri 30 Aug 2013 02:19:48 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found

# By Andreas Färber (14) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony:
  isa: Fix documentation of isa_register_portio_list()
  qom: Assert instance size in object_initialize_with_type()
  qom: Pass available size to object_initialize()
  qdev: Pass size to qbus_create_inplace()
  virtio-mmio: Pass size to virtio_mmio_bus_new()
  virtio-ccw: Pass size to virtio_ccw_bus_new()
  s390-virtio-bus: Pass size to virtio_s390_bus_new()
  virtio-pci: Pass size to virtio_pci_bus_new()
  usb: Pass size to usb_bus_new()
  scsi: Pass size to scsi_bus_new()
  pci: Pass size to pci_bus_new_inplace()
  ide: Pass size to ide_bus_new()
  ipack: Pass size to ipack_bus_new_inplace()
  intel-hda: Pass size to hda_codec_bus_init()
  qom: Fix object_initialize_with_type() argument name in documentation
  virtio: Remove unnecessary OBJECT() casts
  object: Fix typo in qom/object.h
2013-09-03 12:30:51 -05:00
Andreas Färber
38fcbd3f08 cpu: Replace qemu_for_each_cpu()
It was introduced to loop over CPUs from target-independent code, but
since commit 182735efaf target-independent
CPUState is used.

A loop can be considered more efficient than function calls in a loop,
and CPU_FOREACH() hides implementation details just as well, so use that
instead.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03 12:25:55 +02:00
Andreas Färber
bdc44640cb cpu: Use QTAILQ for CPU list
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand
macros.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03 12:25:55 +02:00
Andreas Färber
27013bf20d a15mpcore: Use qemu_get_cpu() for generic timers
This simplifies the loop and aids with refactoring of CPU list.

Requested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03 11:30:04 +02:00
Marcel Apfelbaum
31efd2e883 usb/dev-hid: Modified usb-tablet category from Misc to Input
usb-tablet device was wrongly assigned to Misc category

Reported-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02 11:06:20 +02:00
Gerd Hoffmann
bdebd6ee81 Revert "usb-hub: report status changes only once"
This reverts commit a309ee6e0a.

This isn't in line with the usb specification and adds regressions,
win7 fails to drive the usb hub for example.

Was added because it "solved" the issue of hubs interacting badly
with the xhci host controller.  Now with the root cause being fixed
in xhci (commit <FIXME>) we can revert this one.

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02 11:06:20 +02:00
Gerd Hoffmann
b8cbc1374a usb-hub: add tracepoint for status reports
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02 11:06:20 +02:00
Gerd Hoffmann
c96c41ed0d usb: parallelize usb3 streams
usb3 bulk endpoints with streams are implicitly pipelined now,
so the requests will actually be processed in parallel.  Also
allow them to complete out-of-order.

Fixes stalls in the uas driver.

Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02 11:06:20 +02:00
Gerd Hoffmann
1556a8fc38 uas: add property for request logging
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-02 11:06:19 +02:00