The company 'Arm' went through a rebranding some years back
involving a recapitalization from 'ARM' to 'Arm'. As a result
our documentation is a bit inconsistent between the two forms.
It's not worth trying to update everywhere in QEMU, but it's
easy enough to make docs/ consistent.
Note that "ARMv8" and similar architecture names, and
older CPU names like "ARM926" still retain all-caps.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-6-peter.maydell@linaro.org
While at it, also fix the numbering in 'What QEMU does'.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200213162942.14177-2-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
I forgot to document the lifetime of handles in the developer
documentation. Do so now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-11-alex.bennee@linaro.org>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-23-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qtests have recently been moved to a separate subdirectory, so
the paths that are mentioned in the documentation have to be adjusted
accordingly. And some of the iotests are now always run as part of
"make check", so this information has to be adjusted here, too.
Message-Id: <20200122134511.23806-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead of recommending checking the TRACE_FOO_ENABLED macro to
skip expensive computations needed only for tracing, recommend
only using trace_event_get_state_backends(). This works for both
compile-time and run-time disabling of events, and has no extra
performance impact if the event is compile-time disabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200120151142.18954-2-peter.maydell@linaro.org
Message-Id: <20200120151142.18954-2-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This finishes the new interface began with the previous patch.
Document the interface and deprecate MMU_MODE<N>_SUFFIX.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no uses of the *_cmmu names other than the bare wrapping
within the *_code inlines. Therefore rename the functions so we
can drop the inlines.
Use abi_ptr instead of target_ulong in preparation for user-only;
the two types are identical for softmmu.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By default VM build test use qemu-img from system's PATH to
create the image disk. Due the lack of qemu-img on the system
or the desire to simply use a version built with QEMU, it would
be nice to allow one to set its path. So this patch makes that
possible by reading the path to qemu-img from QEMU_IMG if set,
otherwise it fallback to default behavior.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191114134246.12073-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Create a bitops.rst which is just a container for the
kernel-doc comments in qemu/bitops.h.
This is mostly a test of the kernel-doc extension machinery.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-7-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The same way the arch tag is being used as a fallback for the arch
parameter, let's do the same for QEMU's machine and avoid some boiler
plate code.
This is now possible because, since Avocado 72.0, it's possible to use
tags with names that match the machine types on QEMU.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
While we are at it fix up the quoted code sections with the inline ::
approach.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
This makes it a bit clearer what this is about.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is mostly extracted from Emilio's more verbose commit comments
with some additional verbiage from me.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Similarly to features for struct types introduce the feature flags also
for commands. This will allow notifying management layers of fixes and
compatible changes in the behaviour of a command which may not be
detectable any other way.
The changes were heavily inspired by commit 6a8c0b5102.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-3-armbru@redhat.com>
tracetool needs to know the group name ("all", "root", or a specific
subdirectory). Also remove the stdin redirection because tracetool.py
needs the path to the trace-events file. Update the documentation.
Fixes: 2098c56a9b
("trace: move setting of group name into Makefiles")
Buglink: https://bugs.launchpad.net/bugs/1844814
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191009135154.10970-1-stefanha@redhat.com>
RCU_READ_LOCK_GUARD() takes the rcu_read_lock and then uses glib's
g_auto infrastructure (and thus whatever the compiler's hooks are) to
release it on all exits of the block.
WITH_RCU_READ_LOCK_GUARD() is similar but is used as a wrapper for the
lock, i.e.:
WITH_RCU_READ_LOCK_GUARD() {
stuff under lock
}
Note the 'unused' attribute is needed to work around clang bug:
https://bugs.llvm.org/show_bug.cgi?id=43482
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It was pointed out we haven't documented the check-tcg part of the
build system. Attempt to rectify that now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We represent the parse tree as OrderedDict. We fetch optional dict
members with .get(). So far, so good.
We represent null literals as None. .get() returns None both for
"absent" and for "present, value is the null literal". Uh-oh.
Test features-if-invalid exposes this bug: "'if': null" is
misinterpreted as absent "if".
We added null to the schema language to "allow [...] an explicit
default value" (commit e53188ada5 "qapi: Allow true, false and null in
schema json", v2.4.0). Hasn't happened; null is still unused except
as generic invalid value in tests/.
To fix, we'd have to replace .get() by something more careful, or
represent null differently. Feasible, but we got more and bigger fish
to fry right now. Remove the null literal from the schema language.
Replace null in tests by another invalid value.
Test features-if-invalid now behaves as it should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We document the language by giving patterns of valid JSON objects.
The patterns contain placeholders we don't define anywhere; their
names have to speak for themselves. I guess they do, but I'd prefer a
bit more rigor. Provide a grammar instead, and rework the text
accordingly.
Documentation for QAPI schema conditionals (commit 967c885108,
6cc32b0e14, 87adbbffd4..3e270dcacc) and feature flags (commit
6a8c0b5102) was bolted on. The sections documenting types, commands
and events don't mention them. Section "Features" and "Configuring
the schema" then provide additional syntax for types, commands and
events. I hate that. Fix the sections documenting types, commands
and events to provide accurate syntax, and point to "Features" and
"Configuring the schema" for details.
We talk about "(top-level) expressions other than include and pragma".
Adopt more convenient terminology: a (top-level) expression is either
a directive (include or pragma) or a definition (anything else).
Avoid the terms "dictionary" and "key". Stick to JSON terminology
"object" and "member name" instead.
While there, make spacing more consistent.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-16-armbru@redhat.com>
The introduction to the QAPI schema is somewhat rambling. Rewrite for
clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-15-armbru@redhat.com>
We have some compatibility advice buried in sections "Enumeration
types" and "Struct types". Compatibility is actually about commands
and events. It devolves to the types used there. All kinds of types,
not just enumerations and structs.
Replace the existing advice by a new section "Compatibility
considerations".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-14-armbru@redhat.com>
[Squash in paragraph on invisible schema changes, as per Eric's review]
Section "QMP/Guest agent schema" starts with a brief introduction,
then subsection "Comments", then subsection "Schema overview" (more
elaborate introduction), and only then talks about schema entities
like types, commands, and so forth.
Subsection "Comments" is long and tiring: almost 500 words, mostly
about doc comments. Move the doc comment part to its own subsection
"Documentation comments" at the very end of "QMP/Guest agent schema".
Subsection "Schema overview" explains naming rules at considerable
length: 250 words. Move this part to its own subsection "Naming rules
and reserved names" right after the subsections on schema entities.
Subsection "Enumeration types" is wedged between "Struct types" and
"Union types". Move it before "Struct types".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-13-armbru@redhat.com>
Absent flat union branches default to the empty struct (since commit
800877bb16 "qapi: allow empty branches in flat unions"). But an
attempt to omit all of them is rejected with "Union 'FOO' has no
branches". Harmless oddity, but it's easy to avoid, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-11-armbru@redhat.com>
[Commit message typo fixed]
The specification claims "Each expression that isn't an include
directive may be preceded by a documentation block", but the code also
rejects them for pragma directives. The code is correct. Fix the
specification.
The specification reserves member names starting with 'has_', but the
code also reserves name 'u'. Fix the specification.
The specification claims "The string 'max' is not allowed as an enum
value". Untrue. Fix the specification. While there, delete the
naming advice, because it's redundant with the naming rules in section
"Schema overview"
The specification claims "No branch of the union can be named 'max',
as this would collide with the implicit enum". Untrue. Fix the
specification.
The specification claims "It is not allowed to name an event 'MAX',
since the generator also produces a C enumeration of all event names
with a generated _MAX value at the end." Untrue. Fix the
specification.
The specification claims "All branches of the union must be complex
types", but the code permits only struct types. The code is correct.
Fix the specification.
The specification claims a command's return type "must be the string
name of a complex or built-in type, a one-element array containing the
name of a complex or built-in type" unless the command is in pragma
'returns-whitelist'. The code does not permit built-in types. Fix
the specification.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-5-armbru@redhat.com>
Commands and events can define their argument type inline (default) or
by referring to another type ('boxed': true, since commit c818408e44
"qapi: Implement boxed types for commands/events", v2.7.0). The
unboxed inline definition is an (anonymous) struct type. The boxed
type may be a struct, union, or alternate type.
The latter is problematic: docs/interop/qemu-spec.txt requires the
value of the 'data' key to be a json-object, but any non-degenerate
alternate type has at least one branch that isn't.
Fortunately, we haven't made use of alternates in this context outside
tests/. Drop support for them.
QAPISchemaAlternateType.is_empty() is now unused. Drop it, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-4-armbru@redhat.com>
Event format ending with newlines confuse the trace reports.
Forbid them.
Add a check to refuse new format added with trailing newline:
$ make
[...]
GEN hw/misc/trace.h
Traceback (most recent call last):
File "scripts/tracetool.py", line 152, in <module>
main(sys.argv)
File "scripts/tracetool.py", line 143, in main
events.extend(tracetool.read_events(fh, arg))
File "scripts/tracetool/__init__.py", line 367, in read_events
event = Event.build(line)
File "scripts/tracetool/__init__.py", line 281, in build
raise ValueError("Event format can not end with a newline character")
ValueError: Error at hw/misc/trace-events:121: Event format can not end with a newline character
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-3-philmd@redhat.com
Message-Id: <20190916095121.29506-3-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch introduces docs/devel/replay.txt which describes the rules
that should be followed to make virtual devices usable in record/replay mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgauk@ispras.ru>
--
v9: fixed external virtual clock description (reported by Artem Pisarenko)
Message-Id: <156404426119.18669.6707258931552832854.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Call this form a "parameter", returning a value extracted
from the DisasContext.
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We already have 'make check-help', use the 'make vm-help' form
to display helps about VM testing. Keep the old target to not
bother old customs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190531064341.29730-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Now that we have a monitor/ subdirectory, let's move hmp.c and qmp.c
from the root directory there. As they contain implementations of
monitor commands, rename them to {hmp,qmp}-cmds.c, so that {hmp,qmp}.c
are free for the HMP and QMP infrastructure.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-9-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Create a new monitor/ subdirectory and move monitor.c there. As the plan
is to move the monitor core into separate files, use the chance to
rename it to misc.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-8-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Our user-facing manual currently has a section "translator internals"
which has some high-level information about the design of the
TCG translator. This should really be in our new devel/ manual.
Convert it to RST format and move it there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190607152827.18003-2-peter.maydell@linaro.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Sometimes, the behaviour of QEMU changes without a change in the QMP
syntax (usually by allowing values or operations that previously
resulted in an error). QMP clients may still need to know whether
they can rely on the changed behavior.
Let's add feature flags to the QAPI schema language, so that we can make
such changes visible with schema introspection.
An example for a schema definition using feature flags looks like this:
{ 'struct': 'TestType',
'data': { 'number': 'int' },
'features': [ 'allow-negative-numbers' ] }
Introspection information then looks like this:
{ "name": "TestType", "meta-type": "object",
"members": [
{ "name": "number", "type": "int" } ],
"features": [ "allow-negative-numbers" ] }
This patch implements feature flags only for struct types. We'll
implement them more widely as needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-2-armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The default-configs/ example added in 717171bd20 is no
more accurate since fa212a2b8b (and various further other
commits).
The Kconfig build system is now in place.
Use the aarch64-softmmu config as example.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190529140504.21580-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Peter Maydell
Cornelia Huck
Alex Bennée
Alexander Bulekov
Thomas Huth
Damien Hedde
Richard Henderson
Markus Armbruster
Wainer dos Santos Moschetta
Paolo Bonzini
Cleber Rosa
Peter Krempa
Stefan Hajnoczi
Dr. David Alan Gilbert
Philippe Mathieu-Daudé
Marc-André Lureau
Pavel Dovgalyuk
Liam Merwick
Kevin Wolf