These instructions are all privileged.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-42-richard.henderson@linaro.org>
Having the callers upcast to X86CPU is a waste, since we
don't need it. We even have to recover env in do_hlt.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-41-richard.henderson@linaro.org>
Pull the svm intercept check into the translator.
Pull the entire implementation of lmsw into the translator.
Push the check for CR8LEG into the regno validation switch.
Unify the gen_io_start check between read/write.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210514151342.384376-40-richard.henderson@linaro.org>
This function is only called from tcg/sysemu/.
There is no need for a stub in tcg/user/.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-39-richard.henderson@linaro.org>
When exiting helper_svm_check_intercept via exception, cpu_vmexit
calls cpu_restore_state, which will recover eip and cc_op via unwind.
Therefore we do not need to store eip or cc_op before the call.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-38-richard.henderson@linaro.org>
The param argument to helper_svm_check_intercept_param is always 0;
eliminate it and rename to helper_svm_check_intercept. Fold
gen_svm_check_intercept_param into gen_svm_check_intercept.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-37-richard.henderson@linaro.org>
Both invocations pass the start of the current instruction,
which is available as s->base.pc_next. The function sets
is_jmp, so we can eliminate a second setting.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-36-richard.henderson@linaro.org>
Any helper that always raises an exception or interrupt,
or simply exits to the main loop, can be so marked.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-35-richard.henderson@linaro.org>
Use STUB_HELPER to ensure that such calls are always eliminated.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-34-richard.henderson@linaro.org>
Our sysemu implementation is a stub. We can already intercept
instructions for vmexit, and raising #UD is trivial.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-33-richard.henderson@linaro.org>
For user-only, we do not need to check for VMM intercept.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-32-richard.henderson@linaro.org>
Most of the VMM instructions are already disabled for user-only,
by being usable only from ring 0.
The spec is intentionally loose for VMMCALL, allowing the VMM to
define syscalls for user-only. However, we're not emulating any
VMM, so VMMCALL can just raise #UD unconditionally.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210514151342.384376-31-richard.henderson@linaro.org>
This removes an ifdef from the middle of disas_insn,
and ensures that the branch is not reachable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-30-richard.henderson@linaro.org>
Sort all of the single-byte members to the same area
of the structure, eliminating 8 bytes of padding.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-29-richard.henderson@linaro.org>
After fixing a typo in the comment, fixup for CODING_STYLE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210514151342.384376-28-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-27-richard.henderson@linaro.org>
It's just as easy to clear the flag with AND than assignment.
In two cases the test for the bit can be folded together with
the test for HF_INHIBIT_IRQ_MASK.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-26-richard.henderson@linaro.org>
Both of these fields store the size of a single memory access,
so the range of values is 0-8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-25-richard.henderson@linaro.org>
Currently, vex_l is either {0,1}; if in the future we implement
AVX-512, the max value will be 2. In vex_v we store a register
number. This is 0-15 for SSE, and 0-31 for AVX-512.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-24-richard.henderson@linaro.org>
The highest bit in this set is 0x40 (PREFIX_REX).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-23-richard.henderson@linaro.org>
The range of values is -1 (none) to 5 (R_GS).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-22-richard.henderson@linaro.org>
The value comes from tb->flags, which is uint32_t.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-21-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-20-richard.henderson@linaro.org>
Treat this flag exactly like we treat the other rex bits.
The -1 initialization is unused; the two tests are > 0 and == 1,
so the value can be reduced to a bool.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-19-richard.henderson@linaro.org>
Treat this flag exactly like we treat rex_b and rex_x.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-18-richard.henderson@linaro.org>
Change the storage from int to uint8_t since the value is in {0,8}.
For x86_64 add 0 in the macros to (1) promote the type back to int,
and (2) make the macro an rvalue.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-17-richard.henderson@linaro.org>
The existing flag, x86_64_hregs, does not accurately describe
its setting. It is true if and only if a REX prefix has been
seen. Yes, that affects the "h" regs, but that's secondary.
Add PREFIX_REX and include this bit in s->prefix. Add REX_PREFIX
so that the check folds away when x86_64 is compiled out.
Fold away the reg >= 8 check, because bit 3 of the register
number comes from the REX prefix in the first place.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-16-richard.henderson@linaro.org>
LMA disables traditional segmentation, exposing a flat address space.
This means that ADDSEG is off.
Since we're adding an accessor macro, pull the value directly out
of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-15-richard.henderson@linaro.org>
LMA is a pre-requisite for CODE64, so there is no way to disable it
for x86_64-linux-user, and there is no way to enable it for i386.
Since we're adding an accessor macro, pull the value directly out
of flags when we're not assuming a constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-14-richard.henderson@linaro.org>
For x86_64 user-only, there is no way to leave 64-bit mode.
Without x86_64, there is no way to enter 64-bit mode. There is
an existing macro to aid with that; simply place it in the right
place in the ifdef chain.
Since we're adding an accessor macro, pull the value directly out
of flags when we're not assuming a constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-13-richard.henderson@linaro.org>
For user-only, SS32 == !VM86, because we are never in
real-mode. Since we cannot enter vm86 mode for x86_64
user-only, SS32 is always set.
Since we're adding an accessor macro, pull the value
directly out of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-12-richard.henderson@linaro.org>
For user-only, CODE32 == !VM86, because we are never in real-mode.
Since we cannot enter vm86 mode for x86_64 user-only, CODE32 is
always set.
Since we're adding an accessor macro, pull the value directly out
of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-11-richard.henderson@linaro.org>
For i386-linux-user, we can enter vm86 mode via the vm86(2) syscall.
That syscall explicitly returns to 32-bit mode, and the syscall does
not exist for a 64-bit x86_64 executable.
Since we're adding an accessor macro, pull the value directly out of
flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-10-richard.henderson@linaro.org>
On real hardware, the linux kernel has the iopl(2) syscall which
can set IOPL to 3, to allow e.g. the xserver to briefly disable
interrupts while programming the graphics card.
However, QEMU cannot and does not implement this syscall, so the
IOPL is never changed from 0. Which means that all of the checks
vs CPL <= IOPL are false for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-9-richard.henderson@linaro.org>
A user-mode executable always runs in ring 3.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-8-richard.henderson@linaro.org>
A user-mode executable is never in real-mode. Since we're adding
an accessor macro, pull the value directly out of flags for sysemu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-7-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-6-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-5-richard.henderson@linaro.org>
In vm86 mode, we use the same helper as real-mode, but with
an extra check for IOPL. All non-exceptional paths set EFLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-4-richard.henderson@linaro.org>
Split out the check for CPL != 0 and the raising of #GP.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-3-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-2-richard.henderson@linaro.org>
Begin replacing the Berkeley float128 routines with FloatParts128.
- includes a new implementation of float128_muladd
- includes the snan silencing that was missing from
float{32,64}_to_float128 and float128_to_float{32,64}.
- does not include float128_min/max* (written but not yet reviewed).
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmChD54dHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV94uAgApJMxVvkRkDuyOXG2
cM0dC+GQQ0prm5id2AW2JREiET+jo2NV7uU8IQGEQq3rtG8trws45gMQFgSRYJk2
sLlAIt4QqD6qzb2H9z+JhOx1yITlsuwrvr+BAwVtK7gw6l4LxKAs35SwWpz/Z5/2
R63bLyontVzzi40Bc4pB/h3CxdOR+UjZ2a2kDIZFuI/j+9pnPoEL/Vp9XMg85ex+
g21rRwE6qv4hrGMhej5YBKQoleoieL3FQ0sXQLi5lLNYejBpU45PjdgdEwbZIBhT
4sQkzV2HRrd84OrQIJU3Jd+zHZoSq6JQUZRSGAnqC7Mvigplo24J5GRjh6T8WoaI
y495Lg==
=MR2G
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-fp-20210516' into staging
Reorg FloatParts to use QEMU_GENERIC.
Begin replacing the Berkeley float128 routines with FloatParts128.
- includes a new implementation of float128_muladd
- includes the snan silencing that was missing from
float{32,64}_to_float128 and float128_to_float{32,64}.
- does not include float128_min/max* (written but not yet reviewed).
# gpg: Signature made Sun 16 May 2021 13:27:10 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-fp-20210516: (46 commits)
softfloat: Move round_to_int_and_pack to softfloat-parts.c.inc
softfloat: Move round_to_int to softfloat-parts.c.inc
softfloat: Convert float-to-float conversions with float128
softfloat: Split float_to_float
softfloat: Move div_floats to softfloat-parts.c.inc
softfloat: Introduce sh[lr]_double primitives
softfloat: Tidy mul128By64To192
softfloat: Use add192 in mul128To256
softfloat: Use mulu64 for mul64To128
softfloat: Move muladd_floats to softfloat-parts.c.inc
softfloat: Move mul_floats to softfloat-parts.c.inc
softfloat: Implement float128_add/sub via parts
softfloat: Move addsub_floats to softfloat-parts.c.inc
softfloat: Use uadd64_carry, usub64_borrow in softfloat-macros.h
softfloat: Move round_canonical to softfloat-parts.c.inc
softfloat: Move sf_canonicalize to softfloat-parts.c.inc
softfloat: Move pick_nan_muladd to softfloat-parts.c.inc
softfloat: Move pick_nan to softfloat-parts.c.inc
softfloat: Move return_nan to softfloat-parts.c.inc
softfloat: Convert float128_default_nan to parts
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This behavior is currently hard-coded in parts_silence_nan,
but setting this bit properly will allow this to be cleaned up.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix of the 2021-05-11 version, with a fix to build on the armhf
cross.
The largest change in this set is David's changes for ram block size
changing; then there's a pile of other cleanups and fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=RJvy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210513a' into staging
Migration pull 2021-05-13
Fix of the 2021-05-11 version, with a fix to build on the armhf
cross.
The largest change in this set is David's changes for ram block size
changing; then there's a pile of other cleanups and fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 13 May 2021 18:36:06 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210513a:
tests/migration: introduce multifd into guestperf
tests/qtest/migration-test: Use g_autofree to avoid leaks on error paths
tests/migration-test: Fix "true" vs true
migration/ram: Use offset_in_ramblock() in range checks
migration/multifd: Print used_length of memory block
migration/ram: Handle RAM block resizes during postcopy
migration/ram: Simplify host page handling in ram_load_postcopy()
migration/ram: Discard RAM when growing RAM blocks after ram_postcopy_incoming_init()
exec: Relax range check in ram_block_discard_range()
migration/ram: Handle RAM block resizes during precopy
numa: Make all callbacks of ram block notifiers optional
numa: Teach ram block notifiers about resizeable ram blocks
util: vfio-helpers: Factor out and fix processing of existing ram blocks
migration: Drop redundant query-migrate result @blocked
migration/ram: Optimize ram_save_host_page()
migration/ram: Reduce unnecessary rate limiting
migrate/ram: remove "ram_bulk_stage" and "fpo_enabled"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ram block notifiers are currently not aware of resizes. To properly
handle resizes during migration, we want to teach ram block notifiers about
resizeable ram.
Introduce the basic infrastructure but keep using max_size in the
existing notifiers. Supply the max_size when adding and removing ram
blocks. Also, notify on resizes.
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: xen-devel@lists.xenproject.org
Cc: haxm-team@intel.com
Cc: Paul Durrant <paul@xen.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Wenchao Wang <wenchao.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-3-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Running the WDR opcode triggers a segfault:
$ cat > foo.S << EOF
> __start:
> wdr
> EOF
$ avr-gcc -nostdlib -nostartfiles -mmcu=avr6 foo.S -o foo.elf
$ qemu-system-avr -serial mon:stdio -nographic -no-reboot \
-M mega -bios foo.elf -d in_asm --singlestep
IN:
0x00000000: WDR
Segmentation fault (core dumped)
(gdb) bt
#0 0x00005555add0b23a in gdb_get_cpu_pid (cpu=0x5555af5a4af0) at ../gdbstub.c:718
#1 0x00005555add0b2dd in gdb_get_cpu_process (cpu=0x5555af5a4af0) at ../gdbstub.c:743
#2 0x00005555add0e477 in gdb_set_stop_cpu (cpu=0x5555af5a4af0) at ../gdbstub.c:2742
#3 0x00005555adc99b96 in cpu_handle_guest_debug (cpu=0x5555af5a4af0) at ../softmmu/cpus.c:306
#4 0x00005555adcc66ab in rr_cpu_thread_fn (arg=0x5555af5a4af0) at ../accel/tcg/tcg-accel-ops-rr.c:224
#5 0x00005555adefaf12 in qemu_thread_start (args=0x5555af5d9870) at ../util/qemu-thread-posix.c:521
#6 0x00007f692d940ea5 in start_thread () from /lib64/libpthread.so.0
#7 0x00007f692d6699fd in clone () from /lib64/libc.so.6
Since the watchdog peripheral is not implemented, simply
log the opcode as unimplemented and keep going.
Reported-by: Fred Konrad <konrad@adacore.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <20210502190900.604292-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If the get_physical_address() call fails, the SH4 get_phys_page_debug()
handler returns an uninitialized address. Instead return -1, which
correspond to "no page found" (see cpu_get_phys_page_debug() doc
string).
This fixes a warning emitted when building with CFLAGS=-O3
(using GCC 10.2.1 20201125):
target/sh4/helper.c: In function ‘superh_cpu_get_phys_page_debug’:
target/sh4/helper.c:446:12: warning: ‘physical’ may be used uninitialized in this function [-Wmaybe-uninitialized]
446 | return physical;
| ^~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20210505161046.1397608-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Clenaup some left over v1.9 code
- Documentation improvements
- Support for the shakti_c machine
- Internal cleanup of the CSR accesses
- Updates to the OpenTitan platform
- Support for the virtio-vga
- Fix for the saturate subtract in vector extensions
- Experimental support for the ePMP spec
- A range of other internal code cleanups and bug fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmCaWaYACgkQIeENKd+X
cFS97Af/c+Zh5KddhY0qYm6/deabhzn2fPrensOX+UlQbThpbKLHPZ+ceh1GRYBl
tqfiQa6ByhLhHk4UihIjJvLL9UW+UUxR3zsUfHcFHGAmy22ms9oiGB+se37gj/YB
2WySYQhHlwW1iz+55mMh+c1wjckFFVjX4dQgh7pl60AJWxNdzNOBUr/BwMZUh0zM
UFsYDGS2MF3JId8VkW4Ui4fKTw0HBexK4gKXOsRIpF6R3+PQa3m4ppr/YZfyUy5W
o8lZhztoO5TgyGyNpCo6UdG9JlJP5iNnPRTn+ordqJhpNKFTLQeuLBW9gMpB9BiG
L1fvPePKz7GWxI/Xrl9uwNyWSYwetA==
=6TPt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210511' into staging
A large collection of RISC-V fixes, improvements and features
- Clenaup some left over v1.9 code
- Documentation improvements
- Support for the shakti_c machine
- Internal cleanup of the CSR accesses
- Updates to the OpenTitan platform
- Support for the virtio-vga
- Fix for the saturate subtract in vector extensions
- Experimental support for the ePMP spec
- A range of other internal code cleanups and bug fixes
# gpg: Signature made Tue 11 May 2021 11:17:10 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210511: (42 commits)
target/riscv: Fix the RV64H decode comment
target/riscv: Consolidate RV32/64 16-bit instructions
target/riscv: Consolidate RV32/64 32-bit instructions
target/riscv: Remove an unused CASE_OP_32_64 macro
target/riscv: Remove the unused HSTATUS_WPRI macro
target/riscv: Remove the hardcoded SATP_MODE macro
target/riscv: Remove the hardcoded MSTATUS_SD macro
target/riscv: Remove the hardcoded HGATP_MODE macro
target/riscv: Remove the hardcoded SSTATUS_SD macro
target/riscv: Remove the hardcoded RVXLEN macro
target/riscv: fix a typo with interrupt names
fpu/softfloat: set invalid excp flag for RISC-V muladd instructions
hw/riscv: Fix OT IBEX reset vector
target/riscv: fix exception index on instruction access fault
target/riscv: fix vrgather macro index variable type bug
target/riscv: Add ePMP support for the Ibex CPU
target/riscv/pmp: Remove outdated comment
target/riscv: Add a config option for ePMP
target/riscv: Implementation of enhanced PMP (ePMP)
target/riscv: Add ePMP CSR access functions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Richard Henderson
Peter Maydell
David Hildenbrand
Philippe Mathieu-Daudé