Commit Graph

222 Commits

Author SHA1 Message Date
Paolo Bonzini 464399a9b4 sd: express dependencies with kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 1001800cc6 ssi: express dependencies with kconfig
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 7c28b925b7 build: convert pci.mak to Kconfig
Instead of including the same list of devices for each target,
set CONFIG_PCI to true, and make the devices default to present
whenever PCI is available.  However, s390x does not want all the
PCI devices, so there is a separate symbol to enable them.

Done mostly with the following script:

  while read i; do
     i=${i%=y}; i=${i#CONFIG_}
     sed -i -e'/^config '$i'$/!b' -en \
            -e'a\' -e'    default y if PCI_DEVICES\' -e'    depends on PCI' \
          `grep -lw $i hw/*/Kconfig`
  done < default-configs/pci.mak

followed by replacing a few "depends on" clauses with "select"
whenever the symbol is not really related to PCI.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-31-yang.zhong@intel.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Paolo Bonzini 82f5181777 kconfig: introduce kconfig files
The Kconfig files were generated mostly with this script:

  for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do
    set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' `
    shift
    if test $# = 1; then
      cat >> $(dirname $1)/Kconfig << EOF
config ${i#CONFIG_}
    bool

EOF
      git add $(dirname $1)/Kconfig
    else
      echo $i $*
    fi
  done
  sed -i '$d' hw/*/Kconfig
  for i in hw/*; do
    if test -d $i && ! test -f $i/Kconfig; then
      touch $i/Kconfig
      git add $i/Kconfig
    fi
  done

Whenever a symbol is referenced from multiple subdirectories, the
script prints the list of directories that reference the symbol.
These symbols have to be added manually to the Kconfig files.

Kconfig.host and hw/Kconfig were created manually.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20190123065618.3520-27-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
kumar sourav 2bbf3a91eb hw: sd: set category of the sd memory card
Sets the category of the sd memory card as DEVICE_CATEGORY_STORAGE.
Devices should be assigned to one of DEVICE_CATEGORY_XXXX.

Signed-off-by: kumar sourav <sourav.jb1988@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190124162045.10474-1-sourav.jb1988@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-30 10:24:20 +01:00
Peter Maydell c0983085d1 hw/sd/sdhci: Don't leak memory region in sdhci_sysbus_realize()
In sdhci_sysbus_realize() we override the initialization of
s->iomem that sdhci_common_realize() performs. However we
don't destroy the old memory region before reinitializing
it, which means that the memory allocated for mr->name in
memory_region_do_init() is leaked.

Since sdhci_initfn() already initializes s->io_ops to
&sdhci_mmio_ops, always use that in sdhci_common_realize()
and remove the now-unnecessary reinitialization of the
MMIO region from sdhci_sysbus_realize().

Spotted by clang's leak sanitizer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181204132952.2601-4-peter.maydell@linaro.org
2018-12-14 13:30:54 +00:00
Markus Armbruster 61e9e3cb45 ssi-sd: Make devices picking up backends unavailable with -device
Device models aren't supposed to go on fishing expeditions for
backends.  They should expose suitable properties for the user to set.
For onboard devices, board code sets them.

Device ssi-sd picks up its block backend in its init() method with
drive_get_next() instead.  This mistake is already marked FIXME since
commit af9e40a.

Unset user_creatable to remove the mistake from our external
interface.  Since the SSI bus doesn't support hotplug, only -device
can be affected.  Only certain ARM machines have ssi-sd and provide an
SSI bus for it; this patch breaks -device ssi-sd for these machines.
No actual use of -device ssi-sd is known.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181009060835.4608-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-24 07:50:16 +01:00
Hans-Erik Floryd 6bfd06da6e sdhci: add i.MX SD Stable Clock bit
Add the ESDHC PRSSTAT_SDSTB bit, using the value of SDHC_CLOCK_INT_STABLE.
Freescale recommends checking this bit when changing clock frequency.

Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 1534507843-4251-1-git-send-email-hans-erik.floryd@rt-labs.com
[PMM: fixed indentation]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-20 11:24:32 +01:00
Guenter Roeck 03a31776e8 hw/sd/bcm2835_sdhost: Fix PIO mode writes
Writes in PIO mode have two requirements:

- A data interrupt must be generated after a write command has been
  issued to indicate that the chip is ready to receive data.
- A block interrupt must be generated after each block to indicate
  that the chip is ready to receive the next data block.

Rearrange the code to make this happen. Tested on raspi3 (in PIO mode)
and raspi2 (in DMA mode).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1531779837-20557-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-23 15:21:26 +01:00
Philippe Mathieu-Daudé 7abf56eed1 hw/sd/omap_mmc: Split 'pseudo-reset' from 'power-on-reset'
DeviceClass::reset models a "cold power-on" reset which can
also be used to powercycle a device; but there is no "hot reset"
(a.k.a. soft-reset) method available.

The OMAP MMC Power-Up Control bit is not designed to powercycle
a card, but to disable it without powering it off (pseudo-reset):

  Multimedia Card (MMC/SD/SDIO) Interface [SPRU765A]

  MMC_CON[11] Power-Up Control (POW)
  This bit must be set to 1 before any valid transaction to either
  MMC/SD or SPI memory cards.
  When 1, the card is considered powered-up and the controller core
  is enabled.
  When 0, the card is considered powered-down (system dependent),
  and the controller core logic is in pseudo-reset state. This is,
  the MMC_STAT flags and the FIFO pointers are reset, any access to
  MMC_DATA[DATA] has no effect, a write into the MMC.CMD register
  is ignored, and a setting of MMC_SPI[STR] to 1 is ignored.

By splitting the 'pseudo-reset' code out of the 'power-on' reset
function, this patch fixes a latent bug in omap_mmc_write(MMC_CON)i
recently exposed by ecd219f7ab.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180706162155.8432-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-09 14:51:34 +01:00
Philippe Mathieu-Daudé 4c8f9735da hw/sd: Use the IEC binary prefix definitions
It eases code review, unit is explicit.

Patch generated using:

  $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/

and modified manually.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-37-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:16 +02:00
Philippe Mathieu-Daudé d23b6caadb hw: Use IEC binary prefix definitions from "qemu/units.h"
Code change produced with:

  $ git ls-files | egrep '\.[ch]$' | \
    xargs sed -i -e 's/\(\W[KMGTPE]\)_BYTE/\1iB/g'

Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Message-Id: <20180625124238.25339-6-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02 15:41:10 +02:00
Peter Maydell 6f4fa0998f Pull request
* Python 3 support in simpletrace.py
  * Convert DPRINTF() to trace events
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbNnIBAAoJEJykq7OBq3PIuJ0H/1bTTflcCY+pozrEr0fm18He
 Ir+fC+yAAbWDuaIWcS1pZIRS1uSFobIqsCXw0i4DxMi+4BZCPCjiv6e8jFDIHW8f
 KW41QOPYL6KsZXgXniLTFsFVxEnZS+bCDVnDPw7ME8Q6CdZG2ryoLkIYcv7kONsG
 P9b7ne4dEWeyuW5/yraoXd2xhz/w/xjTCv2CsanD8/JlI3whRn34odh4XDkRq/ZT
 GmxNKOUKXZPU/dJHK+3DrivNlBBibRBShcnmLoHGWRBt/m62ydyVnanOhWEFlZSG
 ywS6QyKyF4j75Jo4IL+6KbxU5UsNNpg8MOdshMTiX7cPZdUlGV975FAA0ta6Jpk=
 =jJZw
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

Pull request

 * Python 3 support in simpletrace.py
 * Convert DPRINTF() to trace events

# gpg: Signature made Fri 29 Jun 2018 18:53:05 BST
# gpg:                using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  hw/block/pflash_cfi: Convert from DPRINTF() macro to trace events
  hw/block/fdc: Convert from FLOPPY_DPRINTF() macro to trace events
  hw/net/etraxfs_eth: Convert printf() calls to trace events
  hw/net/ne2000: Convert printf() calls to trace events
  hw/net/ne2000: Add trace events
  hw/input/tsc2005: Convert a fprintf() call to trace events
  hw/char/parallel: Convert from pdebug() macro to trace events
  hw/char/serial: Convert from DPRINTF macro to trace events
  sdcard: Reduce sdcard_set_blocklen() trace digits
  trace: Fix format string for the struct timeval members casted to size_t
  simpletrace: Convert name from mapping record to str

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-30 13:59:53 +01:00
Philippe Mathieu-Daudé b3141c0625 sdcard: Use the ldst API
The load/store API will ease further code movement.

Per the Physical Layer Simplified Spec. "3.6 Bus Protocol":

  "In the CMD line the Most Significant Bit (MSB) is transmitted
   first, the Least Significant Bit (LSB) is the last."

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29 15:11:20 +01:00
Peter Maydell 13606b9951 sd: Don't trace SDRequest crc field
We don't actually implement SD command CRC checking, because
for almost all of our SD controllers the CRC generation is
done in hardware, and so modelling CRC generation and checking
would be a bit pointless. (The exception is that milkymist-memcard
makes the guest software compute the CRC.)

As a result almost all of our SD controller models don't bother
to set the SDRequest crc field, and the SD card model doesn't
check it. So the tracing of it in sdbus_do_command() provokes
Coverity warnings about use of uninitialized data.

Drop the CRC field from the trace; we can always add it back
if and when we do anything useful with the CRC.

Fixes Coverity issues 1386072, 1386074, 1386076, 1390571.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180626180324.5537-1-peter.maydell@linaro.org
2018-06-29 15:11:19 +01:00
Philippe Mathieu-Daudé dcfebcf9a3 sdcard: Reduce sdcard_set_blocklen() trace digits
Per the Physical Layer Simplified Spec. "5.3 CSD Register":

  "The maximum block length might therefore be in the range 512...2048 bytes"

Therefore 3 hexdigits are enough to report the block length.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-29 15:04:18 +01:00
Philippe Mathieu-Daudé 25b98b96af hw/sd/omap_mmc: Use qemu_log_mask(UNIMP) instead of printf
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180624040609.17572-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26 17:50:40 +01:00
Philippe Mathieu-Daudé 113f31c06c sdcard: Disable CMD19/CMD23 for Spec v2
These commands got introduced by Spec v3
(see 0c3fb03f7e and 4481bbc79d).

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607180641.874-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:34 +01:00
Philippe Mathieu-Daudé 2c51137538 sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:34 +01:00
Philippe Mathieu-Daudé d1b322182b sdcard: Disable SEND_IF_COND (CMD8) for Spec v1
CMD8 is "Reserved" in Spec v1.10.

Spec v2.00 introduces the SEND_IF_COND command:

  6.4.1 Power Up

    CMD8 is newly added in the Physical Layer Specification Version
    2.00 to support multiple voltage ranges and used to check whether
    the card supports supplied voltage. The version 2.00 or later host
    shall issue CMD8 and verify voltage before card initialization.
    The host that does not support CMD8 shall supply high voltage range.

Message-Id: 201204252110.20873.paul@codesourcery.com
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607180641.874-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:34 +01:00
Philippe Mathieu-Daudé 2f0939c234 sdcard: Add a 'spec_version' property, default to Spec v2.00
As of this commit, the Spec v1 is not working, and all controllers
expect the cards to be conformant to Spec v2.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:33 +01:00
Philippe Mathieu-Daudé e2fce16edb sdcard: Allow commands valid in SPI mode
From the "Physical Layer Simplified Specification Version 1.10"
  Chapter 7.3 "SPI Mode Transaction Packets"
    Table 57: "Commands and arguments"

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180607180641.874-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:33 +01:00
Philippe Mathieu-Daudé 9e1245795f sdcard: Update the Configuration Register (SCR) to Spec Version 1.10
The initial implementation is based on the Specs v1.10 (see a1bb27b1e9).

However the SCR is anouncing the card being v1.01.

The new chapters added in version 1.10 are:

    4.3.10 Switch function command

    Switch function command (CMD6) 1 is used to switch or expand
    memory card functions. [...]
    This is a new feature, introduced in SD physical Layer
    Specification Version 1.10. Therefore, cards that are
    compatible with earlier versions of the spec do not support
    it. The host shall check the "SD_SPEC" field in the SCR
    register to recognize what version of the spec the card
    complies with before using CMD6. It is mandatory for SD
    memory card of Ver1.10 to support CMD6.

    4.3.11 High-Speed mode (25MB/sec interface speed)

    Though the Rev 1.01 SD memory card supports up to 12.5MB/sec
    interface speed, the speed of 25MB/sec is necessary to support
    increasing performance needs of the host and because of memory
    size which continues to grow.
    To achieve 25MB/sec interface speed, clock rate is increased to
    50MHz and CLK/CMD/DAT signal timing and circuit conditions are
    reconsidered and changed from Physical Layer Specification
    Version 1.01.

    4.3.12 Command system (This chapter is newly added in version 1.10)

    SD commands CMD34-37, CMD50, CMD57 are reserved for SD command
    system expansion via the switch command.
    [These commands] will be considered as illegal commands (as
    defined in revision 1.01 of the SD physical layer specification).

The SWITCH_FUNCTION is implemented since the first commit, a1bb27b1e9.

The 25MB/sec High-Speed mode was already updated in d7ecb86752.

The current implementation does not implements CMD34-37, CMD50 and
CMD57, thus these commands already return ILLEGAL.

With this patch, the SCR register now matches the description of the header:

 * SD Memory Card emulation as defined in the "SD Memory Card Physical
 * layer specification, Version 1.10."

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607180641.874-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:33 +01:00
Philippe Mathieu-Daudé c78d6a6466 hw/sd/milkymist-memcard: Add trailing '\n' to qemu_log() call
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180606152128.449-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:33 +01:00
Peter Maydell f67c9b693a acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
 cleanups, NFIT ACPI table.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
 LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
 EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
 odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
 a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
 KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
 =3+V0
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi, vhost, misc: fixes, features

vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (31 commits)
  vhost-blk: turn on pre-defined RO feature bit
  ACPI testing: test NFIT platform capabilities
  nvdimm, acpi: support NFIT platform capabilities
  tests/.gitignore: add entry for generated file
  arch_init: sort architectures
  ui: use local path for local headers
  qga: use local path for local headers
  colo: use local path for local headers
  migration: use local path for local headers
  usb: use local path for local headers
  sd: fix up include
  vhost-scsi: drop an unused include
  ppc: use local path for local headers
  rocker: drop an unused include
  e1000e: use local path for local headers
  ioapic: fix up includes
  ide: use local path for local headers
  display: use local path for local headers
  trace: use local path for local headers
  migration: drop an unused include
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04 10:15:16 +01:00
Michael S. Tsirkin 222ee196ab sd: fix up include
include files shouldn't have the "include/" part, that is implied.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01 19:20:37 +03:00
Philippe Mathieu-Daudé 6dd046a3c4 hw: Do not include "sysemu/blockdev.h" if it is not necessary
Remove those unneeded includes to speed up the compilation
process a little bit.

Code change produced with:

    $ git grep '#include "sysemu/blockdev.h"' | \
      cut -d: -f-1 | \
      xargs egrep -L "(BlockInterfaceType|DriveInfo|drive_get|blk_legacy_dinfo|blockdev_mark_auto_del)" | \
      xargs sed -i.bak '/#include "sysemu\/blockdev.h"/d'

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-15-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 14:15:10 +02:00
Philippe Mathieu-Daudé 0304f9ec9c hw: Do not include "sysemu/block-backend.h" if it is not necessary
Remove those unneeded includes to speed up the compilation
process a little bit. (Continue 7eceff5b5a cleanup)

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-13-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01 14:15:10 +02:00
Philippe Mathieu-Daudé f6fb1f9b31 sdcard: Correct CRC16 offset in sd_function_switch()
Per the Physical Layer Simplified Spec. "4.3.10.4 Switch Function Status":

  The block length is predefined to 512 bits

and "4.10.2 SD Status":

  The SD Status contains status bits that are related to the SD Memory Card
  proprietary features and may be used for future application-specific usage.
  The size of the SD Status is one data block of 512 bit. The content of this
  register is transmitted to the Host over the DAT bus along with a 16-bit CRC.

Thus the 16-bit CRC goes at offset 64.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180509060104.4458-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-15 14:58:44 +01:00
Peter Maydell f3d9fe8f95 hw/sd/bcm2835_sdhost: Don't raise spurious interrupts
The Linux bcm2835_sdhost driver doesn't work on QEMU, because our
model raises spurious data interrupts.  Our function
bcm2835_sdhost_fifo_run() will flag an interrupt any time it is
called with s->datacnt == 0, even if the host hasn't actually issued
a data read or write command yet.  This means that the driver gets a
spurious data interrupt as soon as it enables IRQs and then does
something else that causes us to call the fifo_run routine, like
writing to SDHCFG, and before it does the write to SDCMD to issue the
read.  The driver's IRQ handler then spins forever complaining that
there's no data and the SD controller isn't in a state where there's
going to be any data:

[   41.040738] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000
[   41.042059] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000
(continues forever).

Move the interrupt flag setting to more plausible places:
 * for BUSY, raise this as soon as a BUSYWAIT command has executed
 * for DATA, raise this when the FIFO has any space free (for a write)
   or any data in it (for a read)
 * for BLOCK, raise this when the data count is 0 and we've
   actually done some reading or writing

This is pure guesswork since the documentation for this hardware is
not public, but it is sufficient to get the Linux bcm2835_sdhost
driver to work.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180319161556.16446-3-peter.maydell@linaro.org
2018-04-10 13:02:25 +01:00
Peter Maydell b318f3265c hw/sd/bcm2835_sdhost: Add tracepoints
Add some tracepoints to the bcm2835_sdhost driver, to assist
debugging.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180319161556.16446-2-peter.maydell@linaro.org
2018-04-10 13:02:25 +01:00
Paolo Bonzini 544156efcf sdhci: fix incorrect use of Error *
Detected by Coverity (CID 1386072, 1386073, 1386076, 1386077).  local_err
was unused, and this made the static analyzer unhappy.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20180320151355.25854-1-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23 18:26:45 +00:00
Thomas Huth 7eceff5b5a hw: Do not include "sysemu/block-backend.h" if it is not necessary
After reviewing a patch from Philippe that removes block-backend.h
from hw/lm32/milkymist.c, I noticed that this header is included
unnecessarily in a lot of other files, too. Remove those unneeded
includes to speed up the compilation process a little bit.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518684912-31637-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12 16:12:46 +01:00
Philippe Mathieu-Daudé 08022a916c sdhci: Fix a typo in comment
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180309153654.13518-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09 17:09:45 +00:00
Philippe Mathieu-Daudé 0c3fb03f7e sdcard: Add the Tuning Command (CMD19)
From the "Physical Layer Simplified Specification Version 3.01":

  A known data block ("Tuning block") can be used to tune sampling
  point for tuning required hosts. [...]
  This procedure gives the system optimal timing for each specific
  host and card combination and compensates for static delays in
  the timing budget including process, voltage and different PCB
  loads and skews. [...]
  Data block, carried by DAT[3:0], contains a pattern for tuning
  sampling position to receive data on the CMD and DAT[3:0] line.

[based on a patch from Alistair Francis <alistair.francis@xilinx.com>
 from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180309153654.13518-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09 17:09:44 +00:00
Philippe Mathieu-Daudé 75a96f5e1c sdcard: Display which protocol is used when tracing (SD or SPI)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180309153654.13518-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09 17:09:44 +00:00
Philippe Mathieu-Daudé 2ed61fb57b sdcard: Display command name when tracing CMD/ACMD
The SDBus will reuse these functions, so we put them in a new source file.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180309153654.13518-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: slight wordsmithing of comments, added note that string
 returned does not need to be freed]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09 17:09:44 +00:00
Philippe Mathieu-Daudé 586634b9a8 sdcard: Do not trace CMD55, except when we already expect an ACMD
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180309153654.13518-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09 17:09:44 +00:00
Philippe Mathieu-Daudé 4e5cc67565 sdcard: simplify SD_SEND_OP_COND (ACMD41)
replace switch(single case) -> if()

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-17-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:54 +00:00
Philippe Mathieu-Daudé ad0ade5547 sdcard: simplify SEND_IF_COND (CMD8)
replace switch(single case) -> if()

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-16-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:54 +00:00
Philippe Mathieu-Daudé 3116280040 sdcard: warn if host uses an incorrect address for APP CMD (CMD55)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-15-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:54 +00:00
Philippe Mathieu-Daudé d691148655 sdcard: check the card is in correct state for APP CMD (CMD55)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-14-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:54 +00:00
Philippe Mathieu-Daudé 946897ce18 sdcard: handles more commands in SPI mode
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-13-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:53 +00:00
Philippe Mathieu-Daudé a21208646d sdcard: use a more descriptive label 'unimplemented_spi_cmd'
Suggested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-12-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:53 +00:00
Philippe Mathieu-Daudé 688491c71a sdcard: handle the Security Specification commands
returning sd_illegal, since they are not implemented.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-11-f4bug@amsat.org
[PMM: tweak multiline comment format]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:53 +00:00
Philippe Mathieu-Daudé 49fb7381b2 sdcard: handle CMD54 (SDIO)
Linux uses it to poll the bus before polling for a card.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:53 +00:00
Philippe Mathieu-Daudé da26e3f360 sdcard: use the registerfields API for the CARD_STATUS register masks
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-9-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:53 +00:00
Philippe Mathieu-Daudé 3d42fb52b2 sdcard: use the correct masked OCR in the R3 reply
use the registerfields API to access the OCR register

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:53 +00:00
Philippe Mathieu-Daudé 67bfddd62b sdcard: simplify using the ldst API
the code is easier to review/refactor.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:53 +00:00
Philippe Mathieu-Daudé 0aad4fdfd4 sdcard: remove commands from unsupported old MMC specification
This device does not model MMCA Specification previous to v4.2

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 20180215221325.7611-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22 15:12:53 +00:00