The feature allows the VMSAVE and VMLOAD instructions to execute in guest mode without
causing a VMEXIT. (APM2 15.33.1)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VGIF allows STGI and CLGI to execute in guest mode and control virtual
interrupts in guest mode.
When the VGIF feature is enabled then:
* executing STGI in the guest sets bit 9 of the VMCB offset 60h.
* executing CLGI in the guest clears bit 9 of the VMCB offset 60h.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210730070742.9674-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use raise_exception_ra (without error code) when raising the illegal
opcode operation; raise #GP when setting bits 63:32 of DR6 or DR7.
Move helper_get_dr to sysemu/ since it is a privileged instruction
that is not needed on user-mode emulators.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DR6[63:32] and DR7[63:32] are reserved and need to be zero.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-3-laramglazier@gmail.com>
[Ignore for 32-bit builds. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The address of the last entry in the MSRPM and
in the IOPM must be smaller than the largest physical address.
(APM2 15.10-15.11)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The combination of unset CD and set NW bit in CR0 is illegal.
CR0[63:32] are also reserved and need to be zero.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-4-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will reuse the page walker for both SVM and regular accesses. To do
so we will build a function that receives the currently active paging
mode; start by including in cpu.h the constants and the function to go
from cr4/hflags/efer to the paging mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During a page table walk of TCG+SVM the code in target/i386/excp_helper.c
get_hphys() uses the cr4 register of the guest instead of the hypervisor
to check for the PSE bit. In the test case we have, the guest have not
enabled (yet) the PSE bit and so the page table walk results in a wrong
host physical address resolution and wrong content read by the guest.
Attached patch is against 4.2.1, but works also on 3.1.0. It fixes the
issue for our automated testcase, which is a 32bit hypervisor w/o PAE
support running a guest VM with tcg+svm.
The test worked beforehand up to qemu 2.12, started to fail with qemu 3.0
and later. The added TCG/SVM NPT commit seems to introduce the regression.
In case someone want to try to reproduce it, the iso is at [0], the good
case is [1] and the failing case is [2]. The used commandline is:
qemu-system-i386 -no-kvm -nographic -cpu phenom -m 512 -machine q35 -cdrom seoul-vmm-test.iso
[0] https://depot.genode.org/alex-ab/images/seoul-vmm-test.iso
[1] https://depot.genode.org/alex-ab/images/seoul-vmm-good.txt
[2] https://depot.genode.org/alex-ab/images/seoul-vmm-bad.txt
Signed-off-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements NPT suport for SVM by hooking into
x86_cpu_handle_mmu_fault where it reads the stage-1 page table. Whether
we need to perform this 2nd stage translation, and how, is decided
during vmrun and stored in hflags2, along with nested_cr3 and
nested_pg_mode.
As get_hphys performs a direct cpu_vmexit in case of NPT faults, we need
retaddr in that function. To avoid changing the signature of
cpu_handle_mmu_fault, this passes the value from tlb_fill to get_hphys
via the CPU state.
This was tested successfully via the Jailhouse hypervisor.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <567473a0-6005-5843-4c73-951f476085ca@web.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lara Lazier
Paolo Bonzini
Alexander Boettcher
Jan Kiszka
Thomas Huth