Commit Graph

8 Commits

Author SHA1 Message Date
Cédric Le Goater 99a00e55c7 ftgmac100: remove check on runt messages
This is a ethernet wire limitation not needed in emulation. It breaks
U-Boot n/w stack also.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180530061711.23673-5-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:32 +01:00
Cédric Le Goater 44effc1f99 ftgmac100: fix multicast hash routine
Based on the multicast hash calculation of the FTGMAC100 Linux driver.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530061711.23673-4-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:32 +01:00
Cédric Le Goater 8576b12df7 ftgmac100: add IEEE 802.1Q VLAN support
The ftgmac100 NIC supports VLAN tag insertion and the MAC engine also
has a control to remove VLAN tags from received packets.

The VLAN control bits and VLAN tag information are contained in the
second word of the transmit and receive descriptors. The Insert VLAN
bit and the VLAN Tag available bit are only valid in the first segment
of the packet.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530061711.23673-3-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:32 +01:00
Cédric Le Goater cd679a76a0 ftgmac100: compute maximum frame size depending on the protocol
The maximum frame size includes the CRC and depends if a VLAN tag is
inserted or not. Adjust the frame size limit in the transmit handler
using on the FTGMAC100State buffer size and in the receive handler use
the packet protocol.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530061711.23673-2-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08 13:15:32 +01:00
Laurent Vivier 4a4ff4c58f Remove unnecessary variables for function return value
Re-run Coccinelle script scripts/coccinelle/return_directly.cocci

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
ppc part
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-20 08:48:13 +03:00
Mark Cave-Ayland 4227be63f0 ftgmac100: use inline net_crc32() and bitshift instead of compute_mcast_idx()
This makes it much easier to compare the multicast CRC calculation endian and
bitshift against the Linux driver implementation.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-12-22 10:01:27 +08:00
Cédric Le Goater 1335fe3eb2 net/ftgmac100: add a 'aspeed' property
The Aspeed SoCs have a different definition of the end of the ring
buffer bit. Add a property to specify which set of bits should be used
by the NIC.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-25 19:17:25 +08:00
Cédric Le Goater bd44300d1a net: add FTGMAC100 support
The FTGMAC100 device is an Ethernet controller with DMA function that
can be found on Aspeed SoCs (which include NCSI).

It is fully compliant with IEEE 802.3 specification for 10/100 Mbps
Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and
includes Reduced Media Independent Interface (RMII) and Reduced
Gigabit Media Independent Interface (RGMII) interfaces. It adopts an
AHB bus interface and integrates a link list DMA engine with direct
M-Bus accesses for transmitting and receiving packets. It has
independent TX/RX fifos, supports half and full duplex (1000 Mbps mode
only supports full duplex), flow control for full duplex and
backpressure for half duplex.

The FTGMAC100 also implements IP, TCP, UDP checksum offloads and
supports IEEE 802.1Q VLAN tag insertion and removal. It offers
high-priority transmit queue for QoS and CoS applications

This model is backed with a RealTek 8211E PHY which is the chip found
on the AST2500 EVB. It is complete enough to satisfy two different
Linux drivers and a U-Boot driver. Not supported features are :

 - IEEE 802.1Q VLAN
 - High Priority Transmit Queue
 - Wake-On-LAN functions

The code is based on the Coldfire Fast Ethernet Controller model.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-24 11:30:03 +08:00